PATCH: ni_labpc.c
Jakob Penzien
jwpenzie at mtu.edu
Tue Mar 2 02:16:29 UTC 2010
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Subject: [PATCH] Staging: comedi: Fixed brace, KERN_, 80 characters issues in ni_labpc.c
This is a patch to ni_labpc.c file that fixes all the brace
and 80 character warnings and it also fixes some of the KERN_ facility
warnings found by the checkpatch.pl tool. The two errors about indent warning
are there because I do not understand what they want and so I left it in the orginal code
and they happened to get pulled in the patch.
Signed-off-by: Jakob Penzien <supermine290 at gmail.com>
- ---
drivers/staging/comedi/drivers/ni_labpc.c | 219 ++++++++++++++++++-----------
1 files changed, 135 insertions(+), 84 deletions(-)
diff --git a/drivers/staging/comedi/drivers/ni_labpc.c b/drivers/staging/comedi/drivers/ni_labpc.c
index dc3f398..2140bd8 100644
- --- a/drivers/staging/comedi/drivers/ni_labpc.c
+++ b/drivers/staging/comedi/drivers/ni_labpc.c
@@ -1,7 +1,8 @@
/*
comedi/drivers/ni_labpc.c
Driver for National Instruments Lab-PC series boards and compatibles
- - Copyright (C) 2001, 2002, 2003 Frank Mori Hess <fmhess at users.sourceforge.net>
+ Copyright (C) 2001, 2002, 2003 Frank Mori Hess
+ <fmhess at users.sourceforge.net>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
@@ -101,15 +102,15 @@ NI manuals:
#define ADC_CHAN_BITS(x) ((x) & 0x7)
#define ADC_SCAN_EN_BIT 0x80 /* enables multi channel scans */
#define COMMAND2_REG 0x1
- -#define PRETRIG_BIT 0x1 /* enable pretriggering (used in conjunction with SWTRIG) */
- -#define HWTRIG_BIT 0x2 /* enable paced conversions on external trigger */
+#define PRETRIG_BIT 0x1 /* enable pretriggering (used with SWTRIG) */
+#define HWTRIG_BIT 0x2 /* enable paced conversions on external trigger */
#define SWTRIG_BIT 0x4 /* enable paced conversions */
#define CASCADE_BIT 0x8 /* use two cascaded counters for pacing */
#define DAC_PACED_BIT(channel) (0x40 << ((channel) & 0x1))
#define COMMAND3_REG 0x2
#define DMA_EN_BIT 0x1 /* enable dma transfers */
#define DIO_INTR_EN_BIT 0x2 /* enable interrupts for 8255 */
- -#define DMATC_INTR_EN_BIT 0x4 /* enable dma terminal count interrupt */
+#define DMATC_INTR_EN_BIT 0x4 /* enable dma terminal count interrupt */
#define TIMER_INTR_EN_BIT 0x8 /* enable timer interrupt */
#define ERR_INTR_EN_BIT 0x10 /* enable error interrupt */
#define ADC_FNE_INTR_EN_BIT 0x20 /* enable fifo not empty interrupt */
@@ -120,24 +121,38 @@ NI manuals:
#define DMATC_CLEAR_REG 0xa
#define TIMER_CLEAR_REG 0xc
#define COMMAND6_REG 0xe /* 1200 boards only */
- -#define ADC_COMMON_BIT 0x1 /* select ground or common-mode reference */
+#define ADC_COMMON_BIT 0x1 /* select ground or common-mode reference */
#define ADC_UNIP_BIT 0x2 /* adc unipolar */
- -#define DAC_UNIP_BIT(channel) (0x4 << ((channel) & 0x1)) /* dac unipolar */
+#define DAC_UNIP_BIT(channel) (0x4 << ((channel) & 0x1)) /* dac unipolar */
#define ADC_FHF_INTR_EN_BIT 0x20 /* enable fifo half full interrupt */
- -#define A1_INTR_EN_BIT 0x40 /* enable interrupt on end of hardware count */
- -#define ADC_SCAN_UP_BIT 0x80 /* scan up from channel zero instead of down to zero */
+#define A1_INTR_EN_BIT 0x40 /* enable interrupt on end of hardware
+ * count
+ */
+#define ADC_SCAN_UP_BIT 0x80 /* scan up from channel zero instead of down
+ *to zero
+ */
#define COMMAND4_REG 0xf
#define INTERVAL_SCAN_EN_BIT 0x1 /* enables 'interval' scanning */
- -#define EXT_SCAN_EN_BIT 0x2 /* enables external signal on counter b1 output to trigger scan */
- -#define EXT_CONVERT_OUT_BIT 0x4 /* chooses direction (output or input) for EXTCONV* line */
- -#define ADC_DIFF_BIT 0x8 /* chooses differential inputs for adc (in conjunction with board jumper) */
+#define EXT_SCAN_EN_BIT 0x2 /* enables external signal on counter
+ * b1 output to trigger scan
+ */
+#define EXT_CONVERT_OUT_BIT 0x4 /* chooses direction (output or input)
+ * for EXTCONV* line
+ */
+#define ADC_DIFF_BIT 0x8 /* chooses differential inputs for adc
+ * (in conjunction with board jumper)
+ */
#define EXT_CONVERT_DISABLE_BIT 0x10
#define COMMAND5_REG 0x1c /* 1200 boards only, calibration stuff */
#define EEPROM_WRITE_UNPROTECT_BIT 0x4 /* enable eeprom for write */
#define DITHER_EN_BIT 0x8 /* enable dithering */
#define CALDAC_LOAD_BIT 0x10 /* load calibration dac */
- -#define SCLOCK_BIT 0x20 /* serial clock - rising edge writes, falling edge reads */
- -#define SDATA_BIT 0x40 /* serial data bit for writing to eeprom or calibration dacs */
+#define SCLOCK_BIT 0x20 /* serial clock - rising edge writes,
+ * falling edge reads
+ */
+#define SDATA_BIT 0x40 /* serial data bit for writing to eeprom
+ * or calibration dacs
+ */
#define EEPROM_EN_BIT 0x80 /* enable eeprom for read/write */
#define INTERVAL_COUNT_REG 0x1e
#define INTERVAL_LOAD_REG 0x1f
@@ -160,8 +175,12 @@ NI manuals:
#define DIO_BASE_REG 0x10
#define COUNTER_A_BASE_REG 0x14
#define COUNTER_A_CONTROL_REG (COUNTER_A_BASE_REG + 0x3)
- -#define INIT_A0_BITS 0x14 /* check modes put conversion pacer output in harmless state (a0 mode 2) */
- -#define INIT_A1_BITS 0x70 /* put hardware conversion counter output in harmless state (a1 mode 0) */
+#define INIT_A0_BITS 0x14 /* check modes put conversion pacer output
+ * in harmless state (a0 mode 2)
+ */
+#define INIT_A1_BITS 0x70 /* put hardware conversion counter output
+ * in harmless state (a1 mode 0)
+ */
#define COUNTER_B_BASE_REG 0x18
static int labpc_attach(struct comedi_device *dev, struct comedi_devconfig *it);
@@ -351,7 +370,8 @@ static const struct comedi_lrange range_labpc_ao = {
};
/* functions that do inb/outb and readb/writeb so we can use
- - * function pointers to decide which to use */
+ * function pointers to decide which to use
+ */
static inline unsigned int labpc_inb(unsigned long address)
{
return inb(address);
@@ -423,7 +443,9 @@ static const struct labpc_board_struct labpc_boards[] = {
.ai_scan_up = 1,
.memory_mapped_io = 1,
},
- - /* dummy entry so pci board works when comedi_config is passed driver name */
+ /* dummy entry so pci board works when comedi_config is passed
+ * driver name
+ */
{
.name = DRV_NAME,
.bustype = pci_bustype,
@@ -436,7 +458,7 @@ static const struct labpc_board_struct labpc_boards[] = {
*/
#define thisboard ((struct labpc_board_struct *)dev->board_ptr)
- -static const int dma_buffer_size = 0xff00; /* size in bytes of dma buffer */
+static const int dma_buffer_size = 0xff00; /* size in bytes of dma buffer */
static const int sample_size = 2; /* 2 bytes per sample */
#define devpriv ((struct labpc_private *)dev->private)
@@ -481,18 +503,16 @@ int labpc_common_attach(struct comedi_device *dev, unsigned long iobase,
unsigned long dma_flags, isr_flags;
short lsb, msb;
- - printk("comedi%d: ni_labpc: %s, io 0x%lx", dev->minor, thisboard->name,
- - iobase);
- - if (irq) {
+ printk("comedi%d: ni_labpc: %s, io 0x%lx", dev->minor,
+thisboard->name, iobase);
+ if (irq)
printk(", irq %u", irq);
- - }
- - if (dma_chan) {
+ if (dma_chan)
printk(", dma %u", dma_chan);
- - }
printk("\n");
if (iobase == 0) {
- - printk("io base address is zero!\n");
+ printk(KERN_ERR"io base address is zero!\n");
return -EINVAL;
}
/* request io regions for isa boards */
@@ -500,7 +520,7 @@ int labpc_common_attach(struct comedi_device *dev, unsigned long iobase,
/* check if io addresses are available */
if (!request_region(iobase, LABPC_SIZE,
driver_labpc.driver_name)) {
- - printk("I/O port conflict\n");
+ printk(KERN_ERR"I/O port conflict\n");
return -EIO;
}
}
@@ -532,7 +552,7 @@ int labpc_common_attach(struct comedi_device *dev, unsigned long iobase,
isr_flags |= IRQF_SHARED;
if (request_irq(irq, labpc_interrupt, isr_flags,
driver_labpc.driver_name, dev)) {
- - printk("unable to allocate irq %u\n", irq);
+ printk(KERN_ERR"unable to allocate irq %u\n", irq);
return -EINVAL;
}
}
@@ -540,18 +560,18 @@ int labpc_common_attach(struct comedi_device *dev, unsigned long iobase,
/* grab dma channel */
if (dma_chan > 3) {
- - printk(" invalid dma channel %u\n", dma_chan);
+ printk(KERN_ERR" invalid dma channel %u\n", dma_chan);
return -EINVAL;
} else if (dma_chan) {
/* allocate dma buffer */
devpriv->dma_buffer =
kmalloc(dma_buffer_size, GFP_KERNEL | GFP_DMA);
if (devpriv->dma_buffer == NULL) {
- - printk(" failed to allocate dma buffer\n");
+ printk(KERN_ERR" failed to allocate dma buffer\n");
return -ENOMEM;
}
if (request_dma(dma_chan, driver_labpc.driver_name)) {
- - printk(" failed to allocate dma channel %u\n",
+ printk(KERN_ERR" failed to allocate dma channel %u\n",
dma_chan);
return -EINVAL;
}
@@ -586,7 +606,8 @@ int labpc_common_attach(struct comedi_device *dev, unsigned long iobase,
s = dev->subdevices + 1;
if (thisboard->has_ao) {
/* Could provide command support, except it only has a one sample
- - * hardware buffer for analog output and no underrun flag. */
+ * hardware buffer for analog output and no underrun flag.
+ */
s->type = COMEDI_SUBD_AO;
s->subdev_flags = SDF_READABLE | SDF_WRITABLE | SDF_GROUND;
s->n_chan = NUM_AO_CHAN;
@@ -608,7 +629,9 @@ int labpc_common_attach(struct comedi_device *dev, unsigned long iobase,
/* 8255 dio */
s = dev->subdevices + 2;
- - /* if board uses io memory we have to give a custom callback function to the 8255 driver */
+ /* if board uses io memory we have to give a custom callback function
+ *to the 8255 driver
+ */
if (thisboard->memory_mapped_io)
subdev_8255_init(dev, s, labpc_dio_mem_callback,
(unsigned long)(dev->iobase + DIO_BASE_REG));
@@ -640,14 +663,12 @@ int labpc_common_attach(struct comedi_device *dev, unsigned long iobase,
s->insn_read = labpc_eeprom_read_insn;
s->insn_write = labpc_eeprom_write_insn;
- - for (i = 0; i < EEPROM_SIZE; i++) {
+ for (i = 0; i < EEPROM_SIZE; i++)
devpriv->eeprom_data[i] = labpc_eeprom_read(dev, i);
- - }
#ifdef LABPC_DEBUG
- - printk(" eeprom:");
- - for (i = 0; i < EEPROM_SIZE; i++) {
+ printk(KERN_" eeprom:");
+ for (i = 0; i < EEPROM_SIZE; i++)
printk(" %i:0x%x ", i, devpriv->eeprom_data[i]);
- - }
printk("\n");
#endif
} else
@@ -679,22 +700,23 @@ static int labpc_attach(struct comedi_device *dev, struct comedi_devconfig *it)
case pci_bustype:
#ifdef CONFIG_COMEDI_PCI
retval = labpc_find_device(dev, it->options[0], it->options[1]);
- - if (retval < 0) {
+ if (retval < 0)
return retval;
- - }
retval = mite_setup(devpriv->mite);
if (retval < 0)
return retval;
iobase = (unsigned long)devpriv->mite->daq_io_addr;
irq = mite_irq(devpriv->mite);
#else
- - printk(" this driver has not been built with PCI support.\n");
+ printk(KERN_"this driver has not been"
+ "built with PCI support.\n");
return -EINVAL;
#endif
break;
case pcmcia_bustype:
printk
- - (" this driver does not support pcmcia cards, use ni_labpc_cs.o\n");
+ (" this driver does not support pcmcia cards,"
+ "use ni_labpc_cs.o\n");
return -EINVAL;
break;
default:
@@ -715,7 +737,7 @@ static int labpc_find_device(struct comedi_device *dev, int bus, int slot)
for (mite = mite_devices; mite; mite = mite->next) {
if (mite->used)
continue;
- - /* if bus/slot are specified then make sure we have the right bus/slot */
+/* if bus/slot are specified then make sure we have the right bus/slot */
if (bus || slot) {
if (bus != mite->pcidev->bus->number
|| slot != PCI_SLOT(mite->pcidev->devfn))
@@ -726,13 +748,13 @@ static int labpc_find_device(struct comedi_device *dev, int bus, int slot)
continue;
if (mite_device_id(mite) == labpc_boards[i].device_id) {
devpriv->mite = mite;
- - /* fixup board pointer, in case we were using the dummy "ni_labpc" entry */
+ /* fixup board pointer, in case we were using the dummy "ni_labpc" entry */
dev->board_ptr = &labpc_boards[i];
return 0;
}
}
}
- - printk("no device found\n");
+ printk(KERN_ERR"no device found\n");
mite_list_devices();
return -EIO;
}
@@ -823,7 +845,8 @@ static int labpc_ai_chanlist_invalid(const struct comedi_device *dev,
if (mode == MODE_SINGLE_CHAN_INTERVAL) {
if (cmd->chanlist_len > 0xff) {
comedi_error(dev,
- - "ni_labpc: chanlist too long for single channel interval mode\n");
+ "ni_labpc: chanlist too long for single"
+ "channel interval mode\n");
return 1;
}
}
@@ -838,14 +861,16 @@ static int labpc_ai_chanlist_invalid(const struct comedi_device *dev,
case MODE_SINGLE_CHAN_INTERVAL:
if (CR_CHAN(cmd->chanlist[i]) != channel) {
comedi_error(dev,
- - "channel scanning order specified in chanlist is not supported by hardware.\n");
+ "channel scanning order specified"
+ "in chanlist is not supported by hardware.\n");
return 1;
}
break;
case MODE_MULT_CHAN_UP:
if (CR_CHAN(cmd->chanlist[i]) != i) {
comedi_error(dev,
- - "channel scanning order specified in chanlist is not supported by hardware.\n");
+ "channel scanning order specified"
+ "in chanlist is not supported by hardware.\n");
return 1;
}
break;
@@ -853,7 +878,8 @@ static int labpc_ai_chanlist_invalid(const struct comedi_device *dev,
if (CR_CHAN(cmd->chanlist[i]) !=
cmd->chanlist_len - i - 1) {
comedi_error(dev,
- - "channel scanning order specified in chanlist is not supported by hardware.\n");
+ "channel scanning order specified"
+ "in chanlist is not supported by hardware.\n");
return 1;
}
break;
@@ -865,13 +891,15 @@ static int labpc_ai_chanlist_invalid(const struct comedi_device *dev,
if (CR_RANGE(cmd->chanlist[i]) != range) {
comedi_error(dev,
- - "entries in chanlist must all have the same range\n");
+ "entries in chanlist must all have the"
+ "same range\n");
return 1;
}
if (CR_AREF(cmd->chanlist[i]) != aref) {
comedi_error(dev,
- - "entries in chanlist must all have the same reference\n");
+ "entries in chanlist must all have the"
+ "same reference\n");
return 1;
}
}
@@ -980,7 +1008,7 @@ static int labpc_ai_cmdtest(struct comedi_device *dev,
if (err)
return 1;
- - /* step 2: make sure trigger sources are unique and mutually compatible */
+ /*step 2: make sure trigger sources are unique and mutually compatible*/
if (cmd->start_src != TRIG_NOW && cmd->start_src != TRIG_EXT)
err++;
@@ -1008,9 +1036,8 @@ static int labpc_ai_cmdtest(struct comedi_device *dev,
err++;
}
- - if (!cmd->chanlist_len) {
+ if (!cmd->chanlist_len)
err++;
- - }
if (cmd->scan_end_arg != cmd->chanlist_len) {
cmd->scan_end_arg = cmd->chanlist_len;
err++;
@@ -1052,7 +1079,9 @@ static int labpc_ai_cmdtest(struct comedi_device *dev,
err++;
}
break;
- - /* TRIG_EXT doesn't care since it doesn't trigger off a numbered channel */
+ /* TRIG_EXT doesn't care since it doesn't trigger off a
+ * numbered channel
+ */
default:
break;
}
@@ -1105,30 +1134,36 @@ static int labpc_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
devpriv->write_byte(devpriv->command3_bits, dev->iobase + COMMAND3_REG);
/* initialize software conversion count */
- - if (cmd->stop_src == TRIG_COUNT) {
+ if (cmd->stop_src == TRIG_COUNT)
devpriv->count = cmd->stop_arg * cmd->chanlist_len;
- - }
/* setup hardware conversion counter */
if (cmd->stop_src == TRIG_EXT) {
- - /* load counter a1 with count of 3 (pc+ manual says this is minimum allowed) using mode 0 */
+ /* load counter a1 with count of 3 (pc+ manual says this
+ * is minimum allowed) using mode 0
+ */
ret = labpc_counter_load(dev, dev->iobase + COUNTER_A_BASE_REG,
1, 3, 0);
if (ret < 0) {
comedi_error(dev, "error loading counter a1");
return -1;
}
- - } else /* otherwise, just put a1 in mode 0 with no count to set its output low */
+ } else
+/* otherwise, just put a1 in mode 0 with no count to set its output low */
devpriv->write_byte(INIT_A1_BITS,
dev->iobase + COUNTER_A_CONTROL_REG);
/* figure out what method we will use to transfer data */
if (devpriv->dma_chan && /* need a dma channel allocated */
- - /* dma unsafe at RT priority, and too much setup time for TRIG_WAKE_EOS for */
+ /* dma unsafe at RT priority, and too much setup time for
+ *TRIG_WAKE_EOS for
+ */
(cmd->flags & (TRIG_WAKE_EOS | TRIG_RT)) == 0 &&
/* only available on the isa boards */
thisboard->bustype == isa_bustype) {
xfer = isa_dma_transfer;
- - } else if (thisboard->register_layout == labpc_1200_layout && /* pc-plus has no fifo-half full interrupt */
+ } else if (thisboard->register_layout == labpc_1200_layout &&
+/* pc-plus has no fifo-half full interrupt */
+
/* wake-end-of-scan should interrupt on fifo not empty */
(cmd->flags & TRIG_WAKE_EOS) == 0 &&
/* make sure we are taking more than just a few points */
@@ -1186,8 +1221,10 @@ static int labpc_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
if (labpc_ai_scan_mode(cmd) == MODE_MULT_CHAN_UP ||
labpc_ai_scan_mode(cmd) == MODE_MULT_CHAN_DOWN) {
devpriv->command1_bits |= ADC_SCAN_EN_BIT;
- - /* need a brief delay before enabling scan, or scan list will get screwed when you switch
- - * between scan up to scan down mode - dunno why */
+ /* need a brief delay before enabling scan, or scan list will
+ * get screwed when you switch between scan up to
+ * scan down mode - dunno why
+ */
udelay(1);
devpriv->write_byte(devpriv->command1_bits,
dev->iobase + COMMAND1_REG);
@@ -1197,7 +1234,8 @@ static int labpc_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
if (cmd->convert_src != TRIG_EXT)
devpriv->command4_bits |= EXT_CONVERT_DISABLE_BIT;
/* XXX should discard first scan when using interval scanning
- - * since manual says it is not synced with scan clock */
+ * since manual says it is not synced with scan clock
+ */
if (labpc_use_continuous_mode(cmd) == 0) {
devpriv->command4_bits |= INTERVAL_SCAN_EN_BIT;
if (cmd->scan_begin_src == TRIG_EXT)
@@ -1214,7 +1252,8 @@ static int labpc_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
devpriv->write_byte(INTERVAL_LOAD_BITS,
dev->iobase + INTERVAL_LOAD_REG);
- - if (cmd->convert_src == TRIG_TIMER || cmd->scan_begin_src == TRIG_TIMER) {
+ if (cmd->convert_src == TRIG_TIMER ||
+ cmd->scan_begin_src == TRIG_TIMER) {
/* set up pacing */
labpc_adc_timing(dev, cmd);
/* load counter b0 in mode 3 */
@@ -1256,7 +1295,8 @@ static int labpc_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
irq_flags = claim_dma_lock();
disable_dma(devpriv->dma_chan);
/* clear flip-flop to make sure 2-byte registers for
- - * count and address get set correctly */
+ * count and address get set correctly
+ */
clear_dma_ff(devpriv->dma_chan);
set_dma_addr(devpriv->dma_chan,
virt_to_bus(devpriv->dma_buffer));
@@ -1361,7 +1401,7 @@ static irqreturn_t labpc_interrupt(int irq, void *d)
}
if (devpriv->current_transfer == isa_dma_transfer) {
- - /* if a dma terminal count of external stop trigger has occurred */
+ /* if a dma terminal count of external stop trigger has occurred */
if (devpriv->status1_bits & DMATC_BIT ||
(thisboard->register_layout == labpc_1200_layout
&& devpriv->status2_bits & A1_TC_BIT)) {
@@ -1454,7 +1494,8 @@ static void labpc_drain_dma(struct comedi_device *dev)
flags = claim_dma_lock();
disable_dma(devpriv->dma_chan);
/* clear flip-flop to make sure 2-byte registers for
- - * count and address get set correctly */
+ * count and address get set correctly
+ */
clear_dma_ff(devpriv->dma_chan);
/* figure out how many points to read */
@@ -1479,12 +1520,10 @@ static void labpc_drain_dma(struct comedi_device *dev)
}
/* write data to comedi buffer */
- - for (i = 0; i < num_points; i++) {
+ for (i = 0; i < num_points; i++)
cfc_write_to_buffer(s, devpriv->dma_buffer[i]);
- - }
if (async->cmd.stop_src == TRIG_COUNT)
devpriv->count -= num_points;
- -
/* set address and count for next transfer */
set_dma_addr(devpriv->dma_chan, virt_to_bus(devpriv->dma_buffer));
set_dma_count(devpriv->dma_chan, leftover * sample_size);
@@ -1504,7 +1543,8 @@ static void handle_isa_dma(struct comedi_device *dev)
}
/* makes sure all data aquired by board is transfered to comedi (used
- - * when aquisition is terminated by stop_src == TRIG_EXT). */
+ * when aquisition is terminated by stop_src == TRIG_EXT).
+ */
static void labpc_drain_dregs(struct comedi_device *dev)
{
if (devpriv->current_transfer == isa_dma_transfer)
@@ -1571,7 +1611,9 @@ static int labpc_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
devpriv->command4_bits |= ADC_DIFF_BIT;
devpriv->write_byte(devpriv->command4_bits, dev->iobase + COMMAND4_REG);
- - /* initialize pacer counter output to make sure it doesn't cause any problems */
+ /* initialize pacer counter output to make sure it doesn't
+ * cause any problems
+ */
devpriv->write_byte(INIT_A0_BITS, dev->iobase + COUNTER_A_CONTROL_REG);
labpc_clear_adc_fifo(dev);
@@ -1610,7 +1652,8 @@ static int labpc_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
/* turn off pacing of analog output channel */
/* note: hardware bug in daqcard-1200 means pacing cannot
- - * be independently enabled/disabled for its the two channels */
+ * be independently enabled/disabled for its the two channels
+ */
spin_lock_irqsave(&dev->spinlock, flags);
devpriv->command2_bits &= ~DAC_PACED_BIT(channel);
devpriv->write_byte(devpriv->command2_bits, dev->iobase + COMMAND2_REG);
@@ -1686,7 +1729,8 @@ static int labpc_eeprom_write_insn(struct comedi_device *dev,
/* only allow writes to user area of eeprom */
if (channel < 16 || channel > 127) {
printk
- - ("eeprom writes are only allowed to channels 16 through 127 (the pointer and user areas)");
+ ("eeprom writes are only allowed to channels 16 through 127"
+ "(the pointer and user areas)");
return -EINVAL;
}
@@ -1724,13 +1768,19 @@ static unsigned int labpc_suggest_transfer_size(struct comedi_cmd cmd)
/* figures out what counter values to use based on command */
static void labpc_adc_timing(struct comedi_device *dev, struct comedi_cmd *cmd)
{
- - const int max_counter_value = 0x10000; /* max value for 16 bit counter in mode 2 */
- - const int min_counter_value = 2; /* min value for 16 bit counter in mode 2 */
+ const int max_counter_value = 0x10000;
+/* max value for 16 bit counter in mode 2 */
+ const int min_counter_value = 2;
+/* min value for 16 bit counter in mode 2 */
unsigned int base_period;
- - /* if both convert and scan triggers are TRIG_TIMER, then they both rely on counter b0 */
+ /* if both convert and scan triggers are TRIG_TIMER,
+ * then they both rely on counter b0
+ */
if (labpc_ai_convert_period(cmd) && labpc_ai_scan_period(cmd)) {
- - /* pick the lowest b0 divisor value we can (for maximum input clock speed on convert and scan counters) */
+ /* pick the lowest b0 divisor value we can
+ * (for maximum input clock speed on convert and scan counters)
+ */
devpriv->divisor_b0 = (labpc_ai_scan_period(cmd) - 1) /
(LABPC_TIMER_BASE * max_counter_value) + 1;
if (devpriv->divisor_b0 < min_counter_value)
@@ -1780,12 +1830,14 @@ static void labpc_adc_timing(struct comedi_device *dev, struct comedi_cmd *cmd)
base_period * devpriv->divisor_a0);
labpc_set_ai_scan_period(cmd,
base_period * devpriv->divisor_b1);
- - /* if only one TRIG_TIMER is used, we can employ the generic cascaded timing functions */
+ /* if only one TRIG_TIMER is used,
+ * we use the generic cascaded timing functions
+ */
} else if (labpc_ai_scan_period(cmd)) {
unsigned int scan_period;
scan_period = labpc_ai_scan_period(cmd);
- - /* calculate cascaded counter values that give desired scan timing */
+ /* calculate cascaded counter values (scan timing) */
i8253_cascade_ns_to_timer_2div(LABPC_TIMER_BASE,
&(devpriv->divisor_b1),
&(devpriv->divisor_b0),
@@ -1796,7 +1848,7 @@ static void labpc_adc_timing(struct comedi_device *dev, struct comedi_cmd *cmd)
unsigned int convert_period;
convert_period = labpc_ai_convert_period(cmd);
- - /* calculate cascaded counter values that give desired conversion timing */
+ /* calculate cascaded counter values (conversion timing) */
i8253_cascade_ns_to_timer_2div(LABPC_TIMER_BASE,
&(devpriv->divisor_a0),
&(devpriv->divisor_b0),
@@ -1864,9 +1916,8 @@ static unsigned int labpc_serial_in(struct comedi_device *dev)
udelay(1);
devpriv->status2_bits =
devpriv->read_byte(dev->iobase + STATUS2_REG);
- - if (devpriv->status2_bits & EEPROM_OUT_BIT) {
+ if (devpriv->status2_bits & EEPROM_OUT_BIT)
value |= 1 << (value_width - i);
- - }
}
return value;
@@ -1876,7 +1927,7 @@ static unsigned int labpc_eeprom_read(struct comedi_device *dev,
unsigned int address)
{
unsigned int value;
- - const int read_instruction = 0x3; /* bits to tell eeprom to expect a read */
+ const int read_instruction = 0x3; /* tells eeprom to expect a read */
const int write_length = 8; /* 8 bit write lengths to eeprom */
/* enable read/write to eeprom */
- --
1.6.3.3
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iEYEARECAAYFAkuMdPcACgkQRHWk8kRA7BA3UwCeJVFrMDfFQK2X3dLXyNDbGW2q
HZYAoMahKweCs9hOP5zyp8BDc8bxn0tK
=BtDO
-----END PGP SIGNATURE-----
More information about the devel
mailing list