[PATCH 2/2] Staging: comedi: fix code warnings in adl_pci9111.c
John Sheehan
john.d.sheehan at gmail.com
Wed Jun 16 18:30:44 UTC 2010
From: John Sheehan <john.d.sheehan at gmail.com>
fix some warnings in adl_pci9111.c reported by
checkpatch.pl tool
-printk() should include KERN_ facility level
-no space before tabs
Signed-off-by: John Sheehan <john.d.sheehan at gmail.com>
---
drivers/staging/comedi/drivers/adl_pci9111.c | 72 ++++++++++++-------------
1 files changed, 35 insertions(+), 37 deletions(-)
diff --git a/drivers/staging/comedi/drivers/adl_pci9111.c b/drivers/staging/comedi/drivers/adl_pci9111.c
index b9501ce..97c308c 100644
--- a/drivers/staging/comedi/drivers/adl_pci9111.c
+++ b/drivers/staging/comedi/drivers/adl_pci9111.c
@@ -83,12 +83,12 @@ TODO:
#include "comedi_pci.h"
#include "comedi_fc.h"
-#define PCI9111_DRIVER_NAME "adl_pci9111"
-#define PCI9111_HR_DEVICE_ID 0x9111
+#define PCI9111_DRIVER_NAME "adl_pci9111"
+#define PCI9111_HR_DEVICE_ID 0x9111
/* TODO: Add other pci9111 board id */
-#define PCI9111_IO_RANGE 0x0100
+#define PCI9111_IO_RANGE 0x0100
#define PCI9111_FIFO_HALF_SIZE 512
@@ -134,27 +134,27 @@ TODO:
/* IO address map */
-#define PCI9111_REGISTER_AD_FIFO_VALUE 0x00 /* AD Data stored in FIFO */
-#define PCI9111_REGISTER_DA_OUTPUT 0x00
-#define PCI9111_REGISTER_DIGITAL_IO 0x02
-#define PCI9111_REGISTER_EXTENDED_IO_PORTS 0x04
-#define PCI9111_REGISTER_AD_CHANNEL_CONTROL 0x06 /* Channel selection */
-#define PCI9111_REGISTER_AD_CHANNEL_READBACK 0x06
-#define PCI9111_REGISTER_INPUT_SIGNAL_RANGE 0x08
-#define PCI9111_REGISTER_RANGE_STATUS_READBACK 0x08
-#define PCI9111_REGISTER_TRIGGER_MODE_CONTROL 0x0A
-#define PCI9111_REGISTER_AD_MODE_INTERRUPT_READBACK 0x0A
-#define PCI9111_REGISTER_SOFTWARE_TRIGGER 0x0E
-#define PCI9111_REGISTER_INTERRUPT_CONTROL 0x0C
-#define PCI9111_REGISTER_8254_COUNTER_0 0x40
-#define PCI9111_REGISTER_8254_COUNTER_1 0x42
-#define PCI9111_REGISTER_8254_COUNTER_2 0X44
-#define PCI9111_REGISTER_8254_CONTROL 0x46
-#define PCI9111_REGISTER_INTERRUPT_CLEAR 0x48
-
-#define PCI9111_TRIGGER_MASK 0x0F
-#define PCI9111_PTRG_OFF (0 << 3)
-#define PCI9111_PTRG_ON (1 << 3)
+#define PCI9111_REGISTER_AD_FIFO_VALUE 0x00 /* AD Data stored in FIFO */
+#define PCI9111_REGISTER_DA_OUTPUT 0x00
+#define PCI9111_REGISTER_DIGITAL_IO 0x02
+#define PCI9111_REGISTER_EXTENDED_IO_PORTS 0x04
+#define PCI9111_REGISTER_AD_CHANNEL_CONTROL 0x06 /* Channel selection */
+#define PCI9111_REGISTER_AD_CHANNEL_READBACK 0x06
+#define PCI9111_REGISTER_INPUT_SIGNAL_RANGE 0x08
+#define PCI9111_REGISTER_RANGE_STATUS_READBACK 0x08
+#define PCI9111_REGISTER_TRIGGER_MODE_CONTROL 0x0A
+#define PCI9111_REGISTER_AD_MODE_INTERRUPT_READBACK 0x0A
+#define PCI9111_REGISTER_SOFTWARE_TRIGGER 0x0E
+#define PCI9111_REGISTER_INTERRUPT_CONTROL 0x0C
+#define PCI9111_REGISTER_8254_COUNTER_0 0x40
+#define PCI9111_REGISTER_8254_COUNTER_1 0x42
+#define PCI9111_REGISTER_8254_COUNTER_2 0X44
+#define PCI9111_REGISTER_8254_CONTROL 0x46
+#define PCI9111_REGISTER_INTERRUPT_CLEAR 0x48
+
+#define PCI9111_TRIGGER_MASK 0x0F
+#define PCI9111_PTRG_OFF (0 << 3)
+#define PCI9111_PTRG_ON (1 << 3)
#define PCI9111_EITS_EXTERNAL (1 << 2)
#define PCI9111_EITS_INTERNAL (0 << 2)
#define PCI9111_TPST_SOFTWARE_TRIGGER (0 << 1)
@@ -164,9 +164,9 @@ TODO:
#define PCI9111_ISC0_SET_IRQ_ON_ENDING_OF_AD_CONVERSION (0 << 0)
#define PCI9111_ISC0_SET_IRQ_ON_FIFO_HALF_FULL (1 << 0)
-#define PCI9111_ISC1_SET_IRQ_ON_TIMER_TICK (0 << 1)
-#define PCI9111_ISC1_SET_IRQ_ON_EXT_TRG (1 << 1)
-#define PCI9111_FFEN_SET_FIFO_ENABLE (0 << 2)
+#define PCI9111_ISC1_SET_IRQ_ON_TIMER_TICK (0 << 1)
+#define PCI9111_ISC1_SET_IRQ_ON_EXT_TRG (1 << 1)
+#define PCI9111_FFEN_SET_FIFO_ENABLE (0 << 2)
#define PCI9111_FFEN_SET_FIFO_DISABLE (1 << 2)
#define PCI9111_CHANNEL_MASK 0x0F
@@ -366,7 +366,7 @@ struct pci9111_private_data {
short ai_bounce_buffer[2 * PCI9111_FIFO_HALF_SIZE];
};
-#define dev_private ((struct pci9111_private_data *)dev->private)
+#define dev_private ((struct pci9111_private_data *)dev->private)
/* ------------------------------------------------------------------ */
/* PLX9050 SECTION */
@@ -1222,7 +1222,7 @@ static int pci9111_attach(struct comedi_device *dev,
return -ENOMEM;
/* Probe the device to determine what device in the series it is. */
- printk("comedi%d: " PCI9111_DRIVER_NAME " driver\n", dev->minor);
+ printk(KERN_INFO "comedi%d: " PCI9111_DRIVER_NAME " driver\n", dev->minor);
for (pci_device = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, NULL);
pci_device != NULL;
@@ -1255,13 +1255,13 @@ static int pci9111_attach(struct comedi_device *dev,
}
}
- printk("comedi%d: no supported board found! (req. bus/slot : %d/%d)\n",
+ printk(KERN_INFO "comedi%d: no supported board found! (req. bus/slot : %d/%d)\n",
dev->minor, it->options[0], it->options[1]);
return -EIO;
found:
- printk("comedi%d: found %s (b:s:f=%d:%d:%d) , irq=%d\n",
+ printk(KERN_INFO "comedi%d: found %s (b:s:f=%d:%d:%d) , irq=%d\n",
dev->minor,
pci9111_boards[i].name,
pci_device->bus->number,
@@ -1275,14 +1275,12 @@ found:
lcr_io_base = pci_resource_start(pci_device, 1);
lcr_io_range = pci_resource_len(pci_device, 1);
- printk
- ("comedi%d: local configuration registers at address 0x%4lx [0x%4lx]\n",
+ printk(KERN_INFO "comedi%d: local configuration registers at address 0x%4lx [0x%4lx]\n",
dev->minor, lcr_io_base, lcr_io_range);
/* Enable PCI device and request regions */
if (comedi_pci_enable(pci_device, PCI9111_DRIVER_NAME) < 0) {
- printk
- ("comedi%d: Failed to enable PCI device and request regions\n",
+ printk(KERN_ERR "comedi%d: Failed to enable PCI device and request regions\n",
dev->minor);
return -EIO;
}
@@ -1291,7 +1289,7 @@ found:
io_base = pci_resource_start(pci_device, 2);
io_range = pci_resource_len(pci_device, 2);
- printk("comedi%d: 6503 registers at address 0x%4lx [0x%4lx]\n",
+ printk(KERN_INFO "comedi%d: 6503 registers at address 0x%4lx [0x%4lx]\n",
dev->minor, io_base, io_range);
dev->iobase = io_base;
@@ -1309,7 +1307,7 @@ found:
if (pci_device->irq > 0) {
if (request_irq(pci_device->irq, pci9111_interrupt,
IRQF_SHARED, PCI9111_DRIVER_NAME, dev) != 0) {
- printk("comedi%d: unable to allocate irq %u\n",
+ printk(KERN_INFO "comedi%d: unable to allocate irq %u\n",
dev->minor, pci_device->irq);
return -EINVAL;
}
--
1.7.0.4
More information about the devel
mailing list