[PATCH 13/13] staging: rtl8192u: remove all C99 style comments from file r8192U_core This patch removes all C99 comments from file rtl8192U_core.c
Mike Gilks
mike.kernel at gilksonline.com
Sat Jun 5 14:12:37 UTC 2010
Signed-off-by: Mike Gilks <mike.kernel at gilksonline.com>
---
drivers/staging/rtl8192u/r8192U_core.c | 395 +++++++++++++++++---------------
1 files changed, 214 insertions(+), 181 deletions(-)
diff --git a/drivers/staging/rtl8192u/r8192U_core.c b/drivers/staging/rtl8192u/r8192U_core.c
index 895f748..dc4d2b6 100644
--- a/drivers/staging/rtl8192u/r8192U_core.c
+++ b/drivers/staging/rtl8192u/r8192U_core.c
@@ -80,7 +80,7 @@ double __extendsfdf2(float a) {return a; }
#ifdef ENABLE_DOT11D
#include "dot11d.h"
#endif
-/* set here to open your trace code. //WB */
+/* set here to open your trace code. WB */
u32 rt_global_debug_component =
/*COMP_INIT |
*COMP_DBG |
@@ -196,7 +196,7 @@ static CHANNEL_LIST ChannelPlan[] = {
56, 60, 64}, 22}, /* MIC */
{{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14}, 14}
/* For Global Domain. 1-11:active scan, 12-14 passive scan.
- * //+YJ, 080626
+ * +YJ, 080626
*/
};
@@ -2785,15 +2785,15 @@ static void rtl8192_init_priv_variable(struct net_device* dev)
IEEE_SOFTMAC_ASSOCIATE | IEEE_SOFTMAC_PROBERQ |
IEEE_SOFTMAC_PROBERS | IEEE_SOFTMAC_TX_QUEUE |
IEEE_SOFTMAC_BEACONS;
- /* added by amy 080604 //| //IEEE_SOFTMAC_SINGLE_QUEUE; */
+ /* added by amy 080604 | IEEE_SOFTMAC_SINGLE_QUEUE; */
priv->ieee80211->active_scan = 1;
priv->ieee80211->modulation = IEEE80211_CCK_MODULATION | IEEE80211_OFDM_MODULATION;
priv->ieee80211->host_encrypt = 1;
priv->ieee80211->host_decrypt = 1;
priv->ieee80211->start_send_beacons = NULL;
- /* rtl819xusb_beacon_tx;//-by amy 080604 */
+ /* rtl819xusb_beacon_tx; -by amy 080604 */
priv->ieee80211->stop_send_beacons = NULL;
- /* rtl8192_beacon_stop;//-by amy 080604 */
+ /* rtl8192_beacon_stop; -by amy 080604 */
priv->ieee80211->softmac_hard_start_xmit = rtl8192_hard_start_xmit;
priv->ieee80211->set_chan = rtl8192_set_chan;
priv->ieee80211->link_change = rtl8192_link_change;
@@ -2882,7 +2882,7 @@ static void rtl8192_init_priv_variable(struct net_device* dev)
* 2005.07.07, by rcnjko.
*/
RCR_AB | RCR_AM | RCR_APM | /* accept BC/MC/UC */
- /* RCR_AICV | RCR_ACRC32 | //accept ICV/CRC error packet */
+ /* RCR_AICV | RCR_ACRC32 | accept ICV/CRC error packet */
((u32)7<<RCR_MXDMA_OFFSET)|
/* Max DMA Burst Size per Rx DMA Burst, 7: unlimited. */
(priv->EarlyRxThreshold<<RX_FIFO_THRESHOLD_SHIFT) |
@@ -4387,7 +4387,7 @@ int rtl8192_down(struct net_device *dev)
/* as cancel_delayed_work will del work->timer, so if work is not
* defined as struct delayed_work, it will corrupt
*/
- /* flush_scheduled_work(); evvl */
+ /* flush_scheduled_work(); */
rtl8192_cancel_deferred_work(priv);
deinit_hal_dm(dev);
del_timer_sync(&priv->watch_dog_timer);
@@ -4687,7 +4687,7 @@ void UpdateRxPktTimeStamp8190 (struct net_device *dev, struct ieee80211_rx_stats
long rtl819x_translate_todbm(u8 signal_strength_index )/* 0-100 index. */
{
- long signal_power; // in dBm.
+ long signal_power; /* in dBm. */
/* Translate to dBm (x=0.5y-95). */
signal_power = (long)((signal_strength_index + 1) >> 1);
@@ -5073,7 +5073,8 @@ static void rtl8192_query_rxphystatus(
memset(precord_stats, 0, sizeof(struct ieee80211_rx_stats));
pstats->bPacketMatchBSSID = precord_stats->bPacketMatchBSSID = bpacket_match_bssid;
pstats->bPacketToSelf = precord_stats->bPacketToSelf = bpacket_toself;
- pstats->bIsCCK = precord_stats->bIsCCK = is_cck_rate;//RX_HAL_IS_CCK_RATE(pDrvInfo);
+ pstats->bIsCCK = precord_stats->bIsCCK = is_cck_rate;
+ /* RX_HAL_IS_CCK_RATE(pDrvInfo); */
pstats->bPacketBeacon = precord_stats->bPacketBeacon = bPacketBeacon;
pstats->bToSelfBA = precord_stats->bToSelfBA = bToSelfBA;
@@ -5093,14 +5094,11 @@ static void rtl8192_query_rxphystatus(
if(is_cck_rate)
{
- //
- // (1)Hardware does not provide RSSI for CCK
- //
+ /* (1)Hardware does not provide RSSI for CCK */
- //
- // (2)PWDB, Average PWDB cacluated by hardware (for rate adaptive)
- //
- u8 report;//, cck_agc_rpt;
+ /* (2)PWDB, Average PWDB cacluated by hardware (for rate adaptive) */
+
+ u8 report; /* , cck_agc_rpt; */
priv->stats.numqry_phystatusCCK++;
@@ -5110,9 +5108,10 @@ static void rtl8192_query_rxphystatus(
report = report>>6;
switch(report)
{
- //Fixed by Jacken from Bryant 2008-03-20
- //Original value is -38 , -26 , -14 , -2
- //Fixed value is -35 , -23 , -11 , 6
+ /* Fixed by Jacken from Bryant 2008-03-20
+ * Original value is -38 , -26 , -14 , -2
+ * Fixed value is -35 , -23 , -11 , 6
+ */
case 0x3:
rx_pwr_all = -35 - (pcck_buf->cck_agc_rpt & 0x3e);
break;
@@ -5152,10 +5151,9 @@ static void rtl8192_query_rxphystatus(
pstats->RxPWDBAll = precord_stats->RxPWDBAll = pwdb_all;
pstats->RecvSignalPower = pwdb_all;
- //
- // (3) Get Signal Quality (EVM)
- //
- //if(bpacket_match_bssid)
+ /* (3) Get Signal Quality (EVM) */
+
+ /* if(bpacket_match_bssid) */
{
u8 sq;
@@ -5181,12 +5179,12 @@ static void rtl8192_query_rxphystatus(
else
{
priv->stats.numqry_phystatusHT++;
- //
- // (1)Get RSSI for HT rate
- //
+
+ /* (1)Get RSSI for HT rate */
+
for(i=RF90_PATH_A; i<priv->NumTotalRFPath; i++)
{
- // 2008/01/30 MH we will judge RF RX path now.
+ /* 2008/01/30 MH we will judge RF RX path now. */
if (priv->brfpath_rxenable[i])
rf_rx_num++;
else
@@ -5195,14 +5193,14 @@ static void rtl8192_query_rxphystatus(
if (!rtl8192_phy_CheckIsLegalRFPath(priv->ieee80211->dev, i))
continue;
- //Fixed by Jacken from Bryant 2008-03-20
- //Original value is 106
+ /* Fixed by Jacken from Bryant 2008-03-20 */
+ /* Original value is 106 */
rx_pwr[i] = ((pofdm_buf->trsw_gain_X[i]&0x3F)*2) - 106;
- //Get Rx snr value in DB
+ /* Get Rx snr value in DB */
tmp_rxsnr = pofdm_buf->rxsnr_X[i];
rx_snrX = (char)(tmp_rxsnr);
- //rx_snrX >>= 1;;
+ /* rx_snrX >>= 1;; */
rx_snrX /= 2;
priv->stats.rxSNRdB[i] = (long)rx_snrX;
@@ -5211,48 +5209,52 @@ static void rtl8192_query_rxphystatus(
total_rssi += RSSI;
/* Record Signal Strength for next packet */
- //if(bpacket_match_bssid)
+ /* if(bpacket_match_bssid) */
{
pstats->RxMIMOSignalStrength[i] =(u8) RSSI;
precord_stats->RxMIMOSignalStrength[i] =(u8) RSSI;
}
}
+ /* (2)PWDB, Average PWDB cacluated by hardware (for rate adaptive) */
- //
- // (2)PWDB, Average PWDB cacluated by hardware (for rate adaptive)
- //
- //Fixed by Jacken from Bryant 2008-03-20
- //Original value is 106
+ /* Fixed by Jacken from Bryant 2008-03-20 */
+ /* Original value is 106 */
rx_pwr_all = (((pofdm_buf->pwdb_all ) >> 1 )& 0x7f) -106;
pwdb_all = rtl819x_query_rxpwrpercentage(rx_pwr_all);
pstats->RxPWDBAll = precord_stats->RxPWDBAll = pwdb_all;
pstats->RxPower = precord_stats->RxPower = rx_pwr_all;
- //
- // (3)EVM of HT rate
- //
+ /* (3)EVM of HT rate */
+
if(pdrvinfo->RxHT && pdrvinfo->RxRate>=DESC90_RATEMCS8 &&
pdrvinfo->RxRate<=DESC90_RATEMCS15)
- max_spatial_stream = 2; //both spatial stream make sense
+ max_spatial_stream = 2;
+ /* both spatial stream make sense */
else
- max_spatial_stream = 1; //only spatial stream 1 makes sense
+ max_spatial_stream = 1;
+ /* only spatial stream 1 makes sense */
- for(i=0; i<max_spatial_stream; i++)
- {
+ for (i = 0; i < max_spatial_stream; i++) {
tmp_rxevm = pofdm_buf->rxevm_X[i];
rx_evmX = (char)(tmp_rxevm);
- // Do not use shift operation like "rx_evmX >>= 1" because the compilor of free build environment
- // fill most significant bit to "zero" when doing shifting operation which may change a negative
- // value to positive one, then the dbm value (which is supposed to be negative) is not correct anymore.
- rx_evmX /= 2; //dbm
+ /* Do not use shift operation like "rx_evmX >>= 1"
+ * because the compilor of free build environment fill
+ * most significant bit to "zero" when doing shifting
+ * operation which may change a negative value to
+ * positive one, then the dbm value (which is supposed
+ * to be negative) is not correct anymore.
+ */
+ rx_evmX /= 2; /* dbm */
evm = rtl819x_evm_dbtopercentage(rx_evmX);
- //if(bpacket_match_bssid)
+ /* if(bpacket_match_bssid) */
{
- if(i==0) // Fill value in RFD, Get the first spatial stream only
+ if(i==0)
+ /* Fill value in RFD,
+ * Get the first spatial stream only */
pstats->SignalQuality = precord_stats->SignalQuality = (u8)(evm & 0xff);
pstats->RxMIMOSignalQuality[i] = precord_stats->RxMIMOSignalQuality[i] = (u8)(evm & 0xff);
}
@@ -5262,23 +5264,30 @@ static void rtl8192_query_rxphystatus(
/* record rx statistics for debug */
rxsc_sgien_exflg = pofdm_buf->rxsc_sgien_exflg;
prxsc = (phy_ofdm_rx_status_rxsc_sgien_exintfflag *)&rxsc_sgien_exflg;
- if(pdrvinfo->BW) //40M channel
+ if(pdrvinfo->BW) /* 40M channel */
priv->stats.received_bwtype[1+prxsc->rxsc]++;
- else //20M channel
+ else /* 20M channel */
priv->stats.received_bwtype[0]++;
}
- //UI BSS List signal strength(in percentage), make it good looking, from 0~100.
- //It is assigned to the BSS List in GetValueFromBeaconOrProbeRsp().
+ /* UI BSS List signal strength(in percentage), make it good looking,
+ * from 0~100. It is assigned to the BSS List in
+ * GetValueFromBeaconOrProbeRsp().
+ */
if(is_cck_rate)
{
- pstats->SignalStrength = precord_stats->SignalStrength = (u8)(rtl819x_signal_scale_mapping((long)pwdb_all));//PWDB_ALL;
+ pstats->SignalStrength = precord_stats->SignalStrength = (u8)(rtl819x_signal_scale_mapping((long)pwdb_all));
+ /* PWDB_ALL; */
}
else
{
- //pRfd->Status.SignalStrength = pRecordRfd->Status.SignalStrength = (u8)(SignalScaleMapping(total_rssi/=RF90_PATH_MAX));//(u8)(total_rssi/=RF90_PATH_MAX);
- // We can judge RX path number now.
+ /* pRfd->Status.SignalStrength =
+ * pRecordRfd->Status.SignalStrength =
+ * (u8)(SignalScaleMapping(total_rssi/=RF90_PATH_MAX));
+ *(u8)(total_rssi/=RF90_PATH_MAX);
+ * We can judge RX path number now.
+ */
if (rf_rx_num != 0)
pstats->SignalStrength = precord_stats->SignalStrength = (u8)(rtl819x_signal_scale_mapping((long)(total_rssi/=rf_rx_num)));
}
@@ -5300,24 +5309,26 @@ void TranslateRxSignalStuff819xUsb(struct sk_buff *skb,
struct ieee80211_rx_stats * pstats,
rx_drvinfo_819x_usb *pdrvinfo)
{
- // TODO: We must only check packet for current MAC address. Not finish
+ /* TODO: We must only check packet for current MAC address.
+ * Not finish */
rtl8192_rx_info *info = (struct rtl8192_rx_info *)skb->cb;
struct net_device *dev=info->dev;
struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
bool bpacket_match_bssid, bpacket_toself;
bool bPacketBeacon=FALSE, bToSelfBA=FALSE;
static struct ieee80211_rx_stats previous_stats;
- struct ieee80211_hdr_3addr *hdr;//by amy
- u16 fc,type;
+ struct ieee80211_hdr_3addr *hdr; /* by amy */
+ u16 fc,type;
- // Get Signal Quality for only RX data queue (but not command queue)
+ /* Get Signal Quality for only RX data queue (but not command queue) */
u8* tmp_buf;
- //u16 tmp_buf_len = 0;
+ /* u16 tmp_buf_len = 0; */
u8 *praddr;
/* Get MAC frame start address. */
- tmp_buf = (u8*)skb->data;// + get_rxpacket_shiftbytes_819xusb(pstats);
+ tmp_buf = (u8*)skb->data;
+ /* + get_rxpacket_shiftbytes_819xusb(pstats); */
hdr = (struct ieee80211_hdr_3addr *)tmp_buf;
fc = le16_to_cpu(hdr->frame_ctl);
@@ -5333,29 +5344,29 @@ void TranslateRxSignalStuff819xUsb(struct sk_buff *skb,
if(WLAN_FC_GET_FRAMETYPE(fc)== IEEE80211_STYPE_BEACON)
{
bPacketBeacon = true;
- //DbgPrint("Beacon 2, MatchBSSID = %d, ToSelf = %d \n", bPacketMatchBSSID, bPacketToSelf);
+ /* DbgPrint("Beacon 2, MatchBSSID = %d, ToSelf = %d \n"
+ * , bPacketMatchBSSID, bPacketToSelf); */
}
if(WLAN_FC_GET_FRAMETYPE(fc) == IEEE80211_STYPE_BLOCKACK)
{
if((eqMacAddr(praddr,dev->dev_addr)))
bToSelfBA = true;
- //DbgPrint("BlockAck, MatchBSSID = %d, ToSelf = %d \n", bPacketMatchBSSID, bPacketToSelf);
+ /* DbgPrint("BlockAck, MatchBSSID = %d,
+ * ToSelf = %d \n", bPacketMatchBSSID,
+ * bPacketToSelf);
+ */
}
-
-
if(bpacket_match_bssid)
- {
priv->stats.numpacket_matchbssid++;
- }
if(bpacket_toself){
priv->stats.numpacket_toself++;
}
- //
- // Process PHY information for previous packet (RSSI/PWDB/EVM)
- //
- // Because phy information is contained in the last packet of AMPDU only, so driver
- // should process phy information of previous packet
+
+ /* Process PHY information for previous packet (RSSI/PWDB/EVM)
+ * Because phy information is contained in the last packet of AMPDU
+ * only, so driver should process phy information of previous packet
+ */
rtl8192_process_phyinfo(priv, tmp_buf, &previous_stats, pstats);
rtl8192_query_rxphystatus(priv, pstats, pdrvinfo, &previous_stats, bpacket_match_bssid,bpacket_toself,bPacketBeacon,bToSelfBA);
rtl8192_record_rxdesc_forlateruse(pstats, &previous_stats);
@@ -5383,9 +5394,10 @@ UpdateReceivedRateHistogramStatistics8190(
)
{
struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
- u32 rcvType=1; //0: Total, 1:OK, 2:CRC, 3:ICV
+ u32 rcvType=1; /* 0: Total, 1:OK, 2:CRC, 3:ICV */
u32 rateIndex;
- u32 preamble_guardinterval; //1: short preamble/GI, 0: long preamble/GI
+ u32 preamble_guardinterval;
+ /* 1: short preamble/GI, 0: long preamble/GI */
if(stats->bCRC)
@@ -5394,22 +5406,18 @@ UpdateReceivedRateHistogramStatistics8190(
rcvType = 3;
if(stats->bShortPreamble)
- preamble_guardinterval = 1;// short
+ preamble_guardinterval = 1; /* short */
else
- preamble_guardinterval = 0;// long
+ preamble_guardinterval = 0; /* long */
switch(stats->rate)
{
- //
- // CCK rate
- //
+ /* CCK rate */
case MGN_1M: rateIndex = 0; break;
case MGN_2M: rateIndex = 1; break;
case MGN_5_5M: rateIndex = 2; break;
case MGN_11M: rateIndex = 3; break;
- //
- // Legacy OFDM rate
- //
+ /* Legacy OFDM rate */
case MGN_6M: rateIndex = 4; break;
case MGN_9M: rateIndex = 5; break;
case MGN_12M: rateIndex = 6; break;
@@ -5418,9 +5426,7 @@ UpdateReceivedRateHistogramStatistics8190(
case MGN_36M: rateIndex = 9; break;
case MGN_48M: rateIndex = 10; break;
case MGN_54M: rateIndex = 11; break;
- //
- // 11n High throughput rate
- //
+ /* 11n High throughput rate */
case MGN_MCS0: rateIndex = 12; break;
case MGN_MCS1: rateIndex = 13; break;
case MGN_MCS2: rateIndex = 14; break;
@@ -5440,7 +5446,7 @@ UpdateReceivedRateHistogramStatistics8190(
default: rateIndex = 28; break;
}
priv->stats.received_preamble_GI[preamble_guardinterval][rateIndex]++;
- priv->stats.received_rate_histogram[0][rateIndex]++; //total
+ priv->stats.received_rate_histogram[0][rateIndex]++; /* total */
priv->stats.received_rate_histogram[rcvType][rateIndex]++;
}
@@ -5450,23 +5456,27 @@ void query_rxdesc_status(struct sk_buff *skb, struct ieee80211_rx_stats *stats,
rtl8192_rx_info *info = (struct rtl8192_rx_info *)skb->cb;
struct net_device *dev=info->dev;
struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
- //rx_desc_819x_usb *desc = (rx_desc_819x_usb *)skb->data;
+ /* rx_desc_819x_usb *desc = (rx_desc_819x_usb *)skb->data; */
rx_drvinfo_819x_usb *driver_info = NULL;
- //
- //Get Rx Descriptor Information
- //
+ /* Get Rx Descriptor Information */
#ifdef USB_RX_AGGREGATION_SUPPORT
if (bIsRxAggrSubframe)
{
rx_desc_819x_usb_aggr_subframe *desc = (rx_desc_819x_usb_aggr_subframe *)skb->data;
stats->Length = desc->Length ;
stats->RxDrvInfoSize = desc->RxDrvInfoSize;
- stats->RxBufShift = 0; //RxBufShift = 2 in RxDesc, but usb didn't shift bytes in fact.
+ stats->RxBufShift = 0;
+ /* RxBufShift = 2 in RxDesc,
+ * but usb didn't shift bytes in fact.
+ */
stats->bICV = desc->ICV;
stats->bCRC = desc->CRC32;
stats->bHwError = stats->bCRC|stats->bICV;
- stats->Decrypted = !desc->SWDec;//RTL8190 set this bit to indicate that Hw does not decrypt packet
+ stats->Decrypted = !desc->SWDec;
+ /* RTL8190 set this bit to indicate
+ * that Hw does not decrypt packet
+ */
} else
#endif
{
@@ -5474,11 +5484,13 @@ void query_rxdesc_status(struct sk_buff *skb, struct ieee80211_rx_stats *stats,
stats->Length = desc->Length;
stats->RxDrvInfoSize = desc->RxDrvInfoSize;
- stats->RxBufShift = 0;//desc->Shift&0x03;
+ stats->RxBufShift = 0; /* desc->Shift&0x03; */
stats->bICV = desc->ICV;
stats->bCRC = desc->CRC32;
stats->bHwError = stats->bCRC|stats->bICV;
- //RTL8190 set this bit to indicate that Hw does not decrypt packet
+ /* RTL8190 set this bit to indicate
+ * that Hw does not decrypt packet
+ */
stats->Decrypted = !desc->SWDec;
}
@@ -5493,11 +5505,10 @@ void query_rxdesc_status(struct sk_buff *skb, struct ieee80211_rx_stats *stats,
if(stats->Length < 24 || stats->Length > MAX_8192U_RX_SIZE)
stats->bHwError |= 1;
- //
- //Get Driver Info
- //
- // TODO: Need to verify it on FGPA platform
- //Driver info are written to the RxBuffer following rx desc
+
+ /* Get Driver Info */
+ /* TODO: Need to verify it on FGPA platform */
+ /* Driver info are written to the RxBuffer following rx desc */
if (stats->RxDrvInfoSize != 0) {
driver_info = (rx_drvinfo_819x_usb *)(skb->data + sizeof(rx_desc_819x_usb) + \
stats->RxBufShift);
@@ -5508,11 +5519,16 @@ void query_rxdesc_status(struct sk_buff *skb, struct ieee80211_rx_stats *stats,
ret_rate = HwRateToMRate90(driver_info->RxHT, driver_info->RxRate);
if(ret_rate == 0xff)
{
- // Abnormal Case: Receive CRC OK packet with Rx descriptor indicating non supported rate.
- // Special Error Handling here, 2008.05.16, by Emily
+ /* Abnormal Case: Receive CRC OK packet with Rx
+ * descriptor indicating non supported rate.
+ */
+ /* Special Error Handling here, 2008.05.16,
+ * by Emily
+ */
stats->bHwError = 1;
- stats->rate = MGN_1M; //Set 1M rate by default
+ stats->rate = MGN_1M;
+ /* Set 1M rate by default */
}else
{
stats->rate = ret_rate;
@@ -5529,15 +5545,15 @@ void query_rxdesc_status(struct sk_buff *skb, struct ieee80211_rx_stats *stats,
stats->bIsAMPDU = (driver_info->PartAggr==1);
stats->bFirstMPDU = (driver_info->PartAggr==1) && (driver_info->FirstAGGR==1);
stats->TimeStampLow = driver_info->TSFL;
- // xiong mask it, 070514
- //pRfd->Status.TimeStampHigh = PlatformEFIORead4Byte(Adapter, TSFR+4);
- // stats->TimeStampHigh = read_nic_dword(dev, TSFR+4);
+ /* xiong mask it, 070514 */
+ /* pRfd->Status.TimeStampHigh =
+ * PlatformEFIORead4Byte(Adapter, TSFR+4);
+ */
+ /* stats->TimeStampHigh = read_nic_dword(dev, TSFR+4); */
UpdateRxPktTimeStamp8190(dev, stats);
- //
- // Rx A-MPDU
- //
+ /* Rx A-MPDU */
if(driver_info->FirstAGGR==1 || driver_info->PartAggr == 1)
RT_TRACE(COMP_RXDESC, "driver_info->FirstAGGR = %d, driver_info->PartAggr = %d\n",
driver_info->FirstAGGR, driver_info->PartAggr);
@@ -5545,23 +5561,23 @@ void query_rxdesc_status(struct sk_buff *skb, struct ieee80211_rx_stats *stats,
}
skb_pull(skb,sizeof(rx_desc_819x_usb));
- //
- // Get Total offset of MPDU Frame Body
- //
+ /* Get Total offset of MPDU Frame Body */
if((stats->RxBufShift + stats->RxDrvInfoSize) > 0) {
stats->bShift = 1;
skb_pull(skb,stats->RxBufShift + stats->RxDrvInfoSize);
}
#ifdef USB_RX_AGGREGATION_SUPPORT
- /* for the rx aggregated sub frame, the redundant space truelly contained in the packet */
+ /* for the rx aggregated sub frame, the redundant space truly
+ * contained in the packet
+ */
if(bIsRxAggrSubframe) {
skb_pull(skb, 8);
}
#endif
/* for debug 2008.5.29 */
- //added by vivi, for MP, 20080108
+ /* added by vivi, for MP, 20080108 */
stats->RxIs40MHzPacket = driver_info->BW;
if(stats->RxDrvInfoSize != 0)
TranslateRxSignalStuff819xUsb(skb, stats, driver_info);
@@ -5589,7 +5605,7 @@ void rtl8192_rx_nomal(struct sk_buff* skb)
.signal = 0,
.noise = -98,
.rate = 0,
- // .mac_time = jiffies,
+ /* .mac_time = jiffies, */
.freq = IEEE80211_24GHZ_BAND,
};
u32 rx_pkt_len = 0;
@@ -5605,7 +5621,7 @@ void rtl8192_rx_nomal(struct sk_buff* skb)
u32 PacketShiftBytes = 0;
rx_desc_819x_usb_aggr_subframe *RxDescr = NULL;
u8 PaddingBytes = 0;
- //add just for testing
+ /* add just for testing */
u8 testing;
#endif
@@ -5622,9 +5638,11 @@ void rtl8192_rx_nomal(struct sk_buff* skb)
#ifdef USB_RX_AGGREGATION_SUPPORT
if (TempByte & BIT0) {
agg_skb = skb;
- //TotalLength = agg_skb->len - 4; /*sCrcLng*/
+ /* TotalLength = agg_skb->len - 4; */ /*sCrcLng*/
TotalLength = stats.Length - 4; /*sCrcLng*/
- //RT_TRACE(COMP_RECV, "%s:first aggregated packet!Length=%d\n",__func__,TotalLength);
+ /* RT_TRACE(COMP_RECV, "%s:first aggregated"
+ * " packet!Length=%d\n",__func__,TotalLength);
+ */
/* though the head pointer has passed this position */
TempDWord = *(u32 *)(agg_skb->data - 4);
PacketLength = (u16)(TempDWord & 0x3FFF); /*sCrcLng*/
@@ -5640,9 +5658,9 @@ void rtl8192_rx_nomal(struct sk_buff* skb)
ieee80211_hdr = (struct ieee80211_hdr_1addr *)skb->data;
unicast_packet = false;
if(is_broadcast_ether_addr(ieee80211_hdr->addr1)) {
- //TODO
+ /* TODO */
}else if(is_multicast_ether_addr(ieee80211_hdr->addr1)){
- //TODO
+ /* TODO */
}else {
/* unicast packet */
unicast_packet = true;
@@ -5658,7 +5676,7 @@ void rtl8192_rx_nomal(struct sk_buff* skb)
}
#ifdef USB_RX_AGGREGATION_SUPPORT
testing = 1;
- // (PipeIndex == 0) && (TempByte & BIT0) => TotalLength > 0.
+ /* (PipeIndex == 0) && (TempByte & BIT0) => TotalLength > 0. */
if (TotalLength > 0) {
PacketOccupiedLendth = PacketLength + (PacketShiftBytes + 8);
if ((PacketOccupiedLendth & 0xFF) != 0)
@@ -5672,7 +5690,9 @@ void rtl8192_rx_nomal(struct sk_buff* skb)
while (agg_skb->len>=GetRxPacketShiftBytes819xUsb(&stats, true)) {
u8 tmpCRC = 0, tmpICV = 0;
- //RT_TRACE(COMP_RECV,"%s:aggred pkt,total_len = %d\n",__func__,agg_skb->len);
+ /* RT_TRACE(COMP_RECV,"%s:aggred pkt,total_len"
+ * " = %d\n",__func__,agg_skb->len);
+ */
RxDescr = (rx_desc_819x_usb_aggr_subframe *)(agg_skb->data);
tmpCRC = RxDescr->CRC32;
tmpICV = RxDescr->ICV;
@@ -5700,9 +5720,9 @@ void rtl8192_rx_nomal(struct sk_buff* skb)
ieee80211_hdr = (struct ieee80211_hdr_1addr *)skb->data;
unicast_packet = false;
if(is_broadcast_ether_addr(ieee80211_hdr->addr1)) {
- //TODO
+ /* TODO */
}else if(is_multicast_ether_addr(ieee80211_hdr->addr1)){
- //TODO
+ /* TODO */
}else {
/* unicast packet */
unicast_packet = true;
@@ -5744,30 +5764,35 @@ rtl819xusb_process_received_packet(
struct ieee80211_rx_stats *pstats
)
{
-// bool bfreerfd=false, bqueued=false;
+ /* bool bfreerfd=false, bqueued=false; */
u8* frame;
u16 frame_len=0;
struct r8192_priv *priv = ieee80211_priv(dev);
-// u8 index = 0;
-// u8 TID = 0;
- //u16 seqnum = 0;
- //PRX_TS_RECORD pts = NULL;
+ /* u8 index = 0; */
+ /* u8 TID = 0; */
+ /* u16 seqnum = 0; */
+ /* PRX_TS_RECORD pts = NULL; */
- // Get shifted bytes of Starting address of 802.11 header. 2006.09.28, by Emily
- //porting by amy 080508
+ /* Get shifted bytes of Starting address of 802.11 header.
+ * 2006.09.28, by Emily
+ */
+ /* porting by amy 080508 */
pstats->virtual_address += get_rxpacket_shiftbytes_819xusb(pstats);
frame = pstats->virtual_address;
frame_len = pstats->packetlength;
-#ifdef TODO // by amy about HCT
+#ifdef TODO /* by amy about HCT */
if(!Adapter->bInHctTest)
CountRxErrStatistics(Adapter, pRfd);
#endif
{
- #ifdef ENABLE_PS //by amy for adding ps function in future
+ #ifdef ENABLE_PS /* by amy for adding ps function in future */
RT_RF_POWER_STATE rtState;
- // When RF is off, we should not count the packet for hw/sw synchronize
- // reason, ie. there may be a duration while sw switch is changed and hw
- // switch is being changed. 2006.12.04, by shien chang.
+ /* When RF is off, we should not count the packet for hw/sw
+ * synchronize
+ * reason, ie. there may be a duration while sw switch is
+ * changed and hw switch is being changed.
+ * 2006.12.04, by shien chang.
+ */
Adapter->HalFunc.GetHwRegHandler(Adapter, HW_VAR_RF_STATE, (u8* )(&rtState));
if (rtState == eRfOff)
{
@@ -5796,15 +5821,15 @@ rtl819xusb_process_received_packet(
void query_rx_cmdpkt_desc_status(struct sk_buff *skb, struct ieee80211_rx_stats *stats)
{
-// rtl8192_rx_info *info = (struct rtl8192_rx_info *)skb->cb;
-// struct net_device *dev=info->dev;
-// struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
+ /* rtl8192_rx_info *info = (struct rtl8192_rx_info *)skb->cb; */
+ /* struct net_device *dev=info->dev; */
+ /* struct r8192_priv *priv =
+ * (struct r8192_priv *)ieee80211_priv(dev);
+ */
rx_desc_819x_usb *desc = (rx_desc_819x_usb *)skb->data;
-// rx_drvinfo_819x_usb *driver_info;
+ /* rx_drvinfo_819x_usb *driver_info; */
- //
- //Get Rx Descriptor Information
- //
+ /* Get Rx Descriptor Information */
stats->virtual_address = (u8*)skb->data;
stats->Length = desc->Length;
stats->RxDrvInfoSize = 0;
@@ -5820,14 +5845,14 @@ void rtl8192_rx_cmd(struct sk_buff *skb)
{
struct rtl8192_rx_info *info = (struct rtl8192_rx_info *)skb->cb;
struct net_device *dev = info->dev;
- //int ret;
-// struct urb *rx_urb = info->urb;
+ /* int ret; */
+ /* struct urb *rx_urb = info->urb; */
/* TODO */
struct ieee80211_rx_stats stats = {
.signal = 0,
.noise = -98,
.rate = 0,
- // .mac_time = jiffies,
+ /* .mac_time = jiffies, */
.freq = IEEE80211_24GHZ_BAND,
};
@@ -5835,21 +5860,14 @@ void rtl8192_rx_cmd(struct sk_buff *skb)
{
query_rx_cmdpkt_desc_status(skb,&stats);
- // this is to be done by amy 080508 prfd->queue_id = 1;
-
-
- //
- // Process the command packet received.
- //
+ /* this is to be done by amy 080508 prfd->queue_id = 1; */
+ /* Process the command packet received. */
rtl819xusb_process_received_packet(dev,&stats);
-
dev_kfree_skb_any(skb);
}
else
;
-
-
}
void rtl8192_irq_rx_tasklet(struct r8192_priv *priv)
@@ -5862,7 +5880,9 @@ void rtl8192_irq_rx_tasklet(struct r8192_priv *priv)
switch (info->out_pipe) {
/* Nomal packet pipe */
case 3:
- //RT_TRACE(COMP_RECV, "normal in-pipe index(%d)\n",info->out_pipe);
+ /* RT_TRACE(COMP_RECV, "normal in-pipe"
+ * " index(%d)\n", info->out_pipe);
+ */
priv->IrpPendingCount--;
rtl8192_rx_nomal(skb);
break;
@@ -5900,13 +5920,14 @@ static const struct net_device_ops rtl8192_netdev_ops = {
/****************************************************************************
- ---------------------------- USB_STUFF---------------------------
-*****************************************************************************/
+ * ---------------------------- USB_STUFF---------------------------
+ ****************************************************************************
+*/
static int __devinit rtl8192_usb_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
-// unsigned long ioaddr = 0;
+ /* unsigned long ioaddr = 0; */
struct net_device *dev = NULL;
struct r8192_priv *priv= NULL;
struct usb_device *udev = interface_to_usbdev(intf);
@@ -5923,7 +5944,7 @@ static int __devinit rtl8192_usb_probe(struct usb_interface *intf,
dev->netdev_ops = &rtl8192_netdev_ops;
- //DMESG("Oops: i'm coming\n");
+ /* DMESG("Oops: i'm coming\n"); */
#if WIRELESS_EXT >= 12
#if WIRELESS_EXT < 17
dev->get_wireless_stats = r8192_get_wireless_stats;
@@ -5932,7 +5953,7 @@ static int __devinit rtl8192_usb_probe(struct usb_interface *intf,
#endif
dev->type=ARPHRD_ETHER;
- dev->watchdog_timeo = HZ*3; //modified by john, 0805
+ dev->watchdog_timeo = HZ*3; /* modified by john, 0805 */
if (dev_alloc_name(dev, ifname) < 0){
RT_TRACE(COMP_INIT, "Oops: devname already taken! Trying wlan%%d...\n");
@@ -5965,7 +5986,9 @@ fail:
}
-//detach all the work and timer structure declared or inititialize in r8192U_init function.
+/*detach all the work and timer structure declared or
+ * inititialize in r8192U_init function.
+ */
void rtl8192_cancel_deferred_work(struct r8192_priv* priv)
{
@@ -5973,8 +5996,8 @@ void rtl8192_cancel_deferred_work(struct r8192_priv* priv)
cancel_delayed_work(&priv->watch_dog_wq);
cancel_delayed_work(&priv->update_beacon_wq);
cancel_work_sync(&priv->qos_activate);
- //cancel_work_sync(&priv->SetBWModeWorkItem);
- //cancel_work_sync(&priv->SwChnlWorkItem);
+ /* cancel_work_sync(&priv->SetBWModeWorkItem); */
+ /* cancel_work_sync(&priv->SwChnlWorkItem); */
}
@@ -5997,12 +6020,12 @@ static void __devexit rtl8192_usb_disconnect(struct usb_interface *intf)
kfree(priv->pFirmware);
priv->pFirmware = NULL;
}
- // priv->rf_close(dev);
-// rtl8192_SetRFPowerState(dev, eRfOff);
+ /* priv->rf_close(dev); */
+ /* rtl8192_SetRFPowerState(dev, eRfOff); */
rtl8192_usb_deleteendpoints(dev);
destroy_workqueue(priv->priv_wq);
- //rtl8192_irq_disable(dev);
- //rtl8192_reset(dev);
+ /* rtl8192_irq_disable(dev); */
+ /* rtl8192_reset(dev); */
mdelay(10);
}
@@ -6073,7 +6096,7 @@ static void __exit rtl8192_usb_module_exit(void)
usb_deregister(&rtl8192_usb_driver);
RT_TRACE(COMP_DOWN, "Exiting");
-// rtl8192_proc_module_remove();
+ /* rtl8192_proc_module_remove(); */
}
@@ -6107,12 +6130,18 @@ void EnableHWSecurityConfig8192(struct net_device *dev)
SECR_value |= SCR_RxUseDK;
SECR_value |= SCR_TxUseDK;
}
- //add HWSec active enable here.
-//default using hwsec. when peer AP is in N mode only and pairwise_key_type is none_aes(which HT_IOT_ACT_PURE_N_MODE indicates it), use software security. when peer AP is in b,g,n mode mixed and pairwise_key_type is none_aes, use g mode hw security. WB on 2008.7.4
+ /* add HWSec active enable here. */
+/* default using hwsec. when peer AP is in N mode only and pairwise_key_type
+ * is none_aes(which HT_IOT_ACT_PURE_N_MODE indicates it),
+ * use software security. when peer AP is in b,g,n mode mixed and
+ * pairwise_key_type is none_aes, use g mode hw security.
+ * WB on 2008.7.4 */
ieee->hwsec_active = 1;
- if ((ieee->pHTInfo->IOTAction&HT_IOT_ACT_PURE_N_MODE) || !hwwep)//!ieee->hwsec_support) //add hwsec_support flag to totol control hw_sec on/off
+ if ((ieee->pHTInfo->IOTAction&HT_IOT_ACT_PURE_N_MODE) || !hwwep)
+ /* !ieee->hwsec_support) */
+ /*add hwsec_support flag to totol control hw_sec on/off */
{
ieee->hwsec_active = 0;
SECR_value &= ~SCR_RxDecEnable;
@@ -6120,7 +6149,8 @@ void EnableHWSecurityConfig8192(struct net_device *dev)
RT_TRACE(COMP_SEC,"%s:, hwsec:%d, pairwise_key:%d, SECR_value:%x\n", __func__, \
ieee->hwsec_active, ieee->pairwise_key_type, SECR_value);
{
- write_nic_byte(dev, SECR, SECR_value);//SECR_value | SCR_UseDK );
+ write_nic_byte(dev, SECR, SECR_value);
+ /* SECR_value | SCR_UseDK ); */
}
}
@@ -6146,23 +6176,25 @@ void setKey( struct net_device *dev,
usConfig |= BIT15 | (KeyType<<2);
else
usConfig |= BIT15 | (KeyType<<2) | KeyIndex;
-// usConfig |= BIT15 | (KeyType<<2) | (DefaultKey<<5) | KeyIndex;
+ /* usConfig |= BIT15 | (KeyType<<2) | (DefaultKey<<5) | KeyIndex; */
for(i=0 ; i<CAM_CONTENT_COUNT; i++){
TargetCommand = i+CAM_CONTENT_COUNT*EntryNo;
TargetCommand |= BIT31|BIT16;
- if(i==0){//MAC|Config
+ if(i==0){ /* MAC|Config */
TargetContent = (u32)(*(MacAddr+0)) << 16|
(u32)(*(MacAddr+1)) << 24|
(u32)usConfig;
write_nic_dword(dev, WCAMI, TargetContent);
write_nic_dword(dev, RWCAM, TargetCommand);
- // printk("setkey cam =%8x\n", read_cam(dev, i+6*EntryNo));
+ /* printk("setkey cam =%8x\n",
+ * read_cam(dev, i+6*EntryNo));
+ */
}
- else if(i==1){//MAC
+ else if(i==1){ /* MAC */
TargetContent = (u32)(*(MacAddr+2)) |
(u32)(*(MacAddr+3)) << 8|
(u32)(*(MacAddr+4)) << 16|
@@ -6171,7 +6203,7 @@ void setKey( struct net_device *dev,
write_nic_dword(dev, RWCAM, TargetCommand);
}
else {
- //Key Material
+ /* Key Material */
if(KeyContent !=NULL){
write_nic_dword(dev, WCAMI, (u32)(*(KeyContent+i-2)) );
write_nic_dword(dev, RWCAM, TargetCommand);
@@ -6182,7 +6214,8 @@ void setKey( struct net_device *dev,
}
/***************************************************************************
- ------------------- module init / exit stubs ----------------
-****************************************************************************/
+ * ------------------- module init / exit stubs ----------------
+ ***************************************************************************
+*/
module_init(rtl8192_usb_module_init);
module_exit(rtl8192_usb_module_exit);
--
1.6.3.3
More information about the devel
mailing list