[PATCH 429/524] Staging: fix typos concerning "address"
Greg Kroah-Hartman
gregkh at suse.de
Thu Aug 5 22:23:32 UTC 2010
From: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh at suse.de>
---
.../staging/comedi/drivers/addi-data/addi_eeprom.c | 2 +-
.../comedi/drivers/addi-data/hwdrv_apci3120.c | 8 ++++----
drivers/staging/comedi/drivers/ni_660x.c | 2 +-
drivers/staging/comedi/drivers/usbdux.c | 2 +-
drivers/staging/comedi/drivers/usbduxfast.c | 2 +-
drivers/staging/octeon/cvmx-fau.h | 2 +-
drivers/staging/otus/80211core/ctxrx.c | 2 +-
drivers/staging/pohmelfs/inode.c | 2 +-
drivers/staging/sep/sep_driver_api.h | 2 +-
drivers/staging/winbond/wbusb.c | 2 +-
drivers/staging/wlags49_h2/mdd.h | 4 ++--
11 files changed, 15 insertions(+), 15 deletions(-)
diff --git a/drivers/staging/comedi/drivers/addi-data/addi_eeprom.c b/drivers/staging/comedi/drivers/addi-data/addi_eeprom.c
index 8fef6f4..e0213a9 100644
--- a/drivers/staging/comedi/drivers/addi-data/addi_eeprom.c
+++ b/drivers/staging/comedi/drivers/addi-data/addi_eeprom.c
@@ -635,7 +635,7 @@ void v_EepromSendCommand76(unsigned int dw_Address, unsigned int dw_EepromComman
| Input Parameters : unsigned int dw_Address : PCI eeprom base address |
-| unsigned short w_offset : Offset of the adress to read |
+| unsigned short w_offset : Offset of the address to read |
| unsigned short * pw_Value : PCI eeprom 16 bit read value. |
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c
index f93ddd4..851f71b 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c
@@ -1090,13 +1090,13 @@ int i_APCI3120_CyclicAnalogInput(int mode, struct comedi_device *dev,
* and put into into an array array used may be for differnet pages
*/
- /* DMA Start Adress Low */
+ /* DMA Start Address Low */
outw(APCI3120_ADD_ON_MWAR_LOW, devpriv->i_IobaseAddon + 0);
outw((devpriv->ul_DmaBufferHw[0] & 0xFFFF),
devpriv->i_IobaseAddon + 2);
/*************************/
- /* DMA Start Adress High */
+ /* DMA Start Address High */
/*************************/
outw(APCI3120_ADD_ON_MWAR_HIGH, devpriv->i_IobaseAddon + 0);
outw((devpriv->ul_DmaBufferHw[0] / 65536),
@@ -1733,11 +1733,11 @@ void v_APCI3120_InterruptDma(int irq, void *d)
var = devpriv->ul_DmaBufferHw[next_dma_buf];
high_word = var / 65536;
- /* DMA Start Adress Low */
+ /* DMA Start Address Low */
outw(APCI3120_ADD_ON_MWAR_LOW, devpriv->i_IobaseAddon + 0);
outw(low_word, devpriv->i_IobaseAddon + 2);
- /* DMA Start Adress High */
+ /* DMA Start Address High */
outw(APCI3120_ADD_ON_MWAR_HIGH, devpriv->i_IobaseAddon + 0);
outw(high_word, devpriv->i_IobaseAddon + 2);
diff --git a/drivers/staging/comedi/drivers/ni_660x.c b/drivers/staging/comedi/drivers/ni_660x.c
index 523cb29..6612b08 100644
--- a/drivers/staging/comedi/drivers/ni_660x.c
+++ b/drivers/staging/comedi/drivers/ni_660x.c
@@ -382,7 +382,7 @@ enum global_interrupt_config_register_bits {
Global_Int_Enable_Bit = 0x80000000
};
-/* Offset of the GPCT chips from the base-adress of the card */
+/* Offset of the GPCT chips from the base-address of the card */
/* First chip is at base-address + 0x00, etc. */
static const unsigned GPCT_OFFSET[2] = { 0x0, 0x800 };
diff --git a/drivers/staging/comedi/drivers/usbdux.c b/drivers/staging/comedi/drivers/usbdux.c
index 7b8a2da..4b320b1 100644
--- a/drivers/staging/comedi/drivers/usbdux.c
+++ b/drivers/staging/comedi/drivers/usbdux.c
@@ -111,7 +111,7 @@ sampling rate. If you sample two channels you get 4kHz and so on.
#define VENDOR_DIR_IN 0xC0
#define VENDOR_DIR_OUT 0x40
-/* internal adresses of the 8051 processor */
+/* internal addresses of the 8051 processor */
#define USBDUXSUB_CPUCS 0xE600
/*
diff --git a/drivers/staging/comedi/drivers/usbduxfast.c b/drivers/staging/comedi/drivers/usbduxfast.c
index 29c3c01..0a164a9 100644
--- a/drivers/staging/comedi/drivers/usbduxfast.c
+++ b/drivers/staging/comedi/drivers/usbduxfast.c
@@ -67,7 +67,7 @@
#define VENDOR_DIR_OUT 0x40
/*
- * internal adresses of the 8051 processor
+ * internal addresses of the 8051 processor
*/
#define USBDUXFASTSUB_CPUCS 0xE600
diff --git a/drivers/staging/octeon/cvmx-fau.h b/drivers/staging/octeon/cvmx-fau.h
index 29bdce6..a6939fc 100644
--- a/drivers/staging/octeon/cvmx-fau.h
+++ b/drivers/staging/octeon/cvmx-fau.h
@@ -299,7 +299,7 @@ cvmx_fau_tagwait_fetch_and_add8(cvmx_fau_reg_8_t reg, int8_t value)
/**
* Builds I/O data for async operations
*
- * @scraddr: Scratch pad byte addres to write to. Must be 8 byte aligned
+ * @scraddr: Scratch pad byte address to write to. Must be 8 byte aligned
* @value: Signed value to add.
* Note: When performing 32 and 64 bit access, only the low
* 22 bits are available.
diff --git a/drivers/staging/otus/80211core/ctxrx.c b/drivers/staging/otus/80211core/ctxrx.c
index a127196..135167d 100644
--- a/drivers/staging/otus/80211core/ctxrx.c
+++ b/drivers/staging/otus/80211core/ctxrx.c
@@ -3117,7 +3117,7 @@ u16_t zfWlanRxFilter(zdev_t* dev, zbuf_t* buf)
index = (src[2]+up) & (ZM_FILTER_TABLE_ROW-1);
- /* TBD : filter frame with source address == own MAC adress */
+ /* TBD : filter frame with source address == own MAC address */
if ((wd->macAddr[0] == src[0]) && (wd->macAddr[1] == src[1])
&& (wd->macAddr[2] == src[2]))
{
diff --git a/drivers/staging/pohmelfs/inode.c b/drivers/staging/pohmelfs/inode.c
index 0c238b2..bc1c605 100644
--- a/drivers/staging/pohmelfs/inode.c
+++ b/drivers/staging/pohmelfs/inode.c
@@ -815,7 +815,7 @@ static int pohmelfs_readpages(struct file *file, struct address_space *mapping,
}
/*
- * Small addres space operations for POHMELFS.
+ * Small address space operations for POHMELFS.
*/
const struct address_space_operations pohmelfs_aops = {
.readpage = pohmelfs_readpage,
diff --git a/drivers/staging/sep/sep_driver_api.h b/drivers/staging/sep/sep_driver_api.h
index 383543d..7ef16da 100644
--- a/drivers/staging/sep/sep_driver_api.h
+++ b/drivers/staging/sep/sep_driver_api.h
@@ -65,7 +65,7 @@
/* free dynamic data aalocated during table creation */
#define SEP_IOCFREEDMATABLEDATA _IO(SEP_IOC_MAGIC_NUMBER , 7)
-/* get the static pool area addersses (physical and virtual) */
+/* get the static pool area addresses (physical and virtual) */
#define SEP_IOCGETSTATICPOOLADDR _IO(SEP_IOC_MAGIC_NUMBER , 8)
/* set flow id command */
diff --git a/drivers/staging/winbond/wbusb.c b/drivers/staging/winbond/wbusb.c
index 681419d..8c3768c 100644
--- a/drivers/staging/winbond/wbusb.c
+++ b/drivers/staging/winbond/wbusb.c
@@ -700,7 +700,7 @@ static int wb35_hw_init(struct ieee80211_hw *hw)
Mds_initial(priv);
/*
- * If no user-defined address in the registry, use the addresss
+ * If no user-defined address in the registry, use the address
* "burned" on the NIC instead.
*/
pMacAddr = priv->sLocalPara.ThisMacAddress;
diff --git a/drivers/staging/wlags49_h2/mdd.h b/drivers/staging/wlags49_h2/mdd.h
index b45c7dd..b50b7b0 100644
--- a/drivers/staging/wlags49_h2/mdd.h
+++ b/drivers/staging/wlags49_h2/mdd.h
@@ -727,10 +727,10 @@ XX1( CFG_SCAN, SCAN_RS_STRCT, scan_result[32] ) /*Scan results *
#define CFG_FCBE 0xFCBE //FW codes ahead of available documentation, so ???????
#define CFG_FCBF 0xFCBF //FW codes ahead of available documentation, so ???????
-#define CFG_HANDOVER_ADDR 0xFCC0 //[AP] Station MAC Adrress re-associated with other AP
+#define CFG_HANDOVER_ADDR 0xFCC0 //[AP] Station MAC Address re-associated with other AP
#define CFG_SCAN_CHANNEL 0xFCC2 //Channel set for host requested scan
//;?#define CFG_SCAN_CHANNEL_MASK 0xFCC2 // contains
-#define CFG_DISASSOCIATE_ADDR 0xFCC4 //[AP] Station MAC Adrress to be disassociated
+#define CFG_DISASSOCIATE_ADDR 0xFCC4 //[AP] Station MAC Address to be disassociated
#define CFG_PROBE_DATA_RATE 0xFCC5 //WARP connection control
#define CFG_FRAME_BURST_LIMIT 0xFCC6 //
#define CFG_COEXISTENSE_BEHAVIOUR 0xFCC7 //[AP]
--
1.7.1
More information about the devel
mailing list