[PATCH 097/641] Staging: rtl8192su: remove USB_TX_DRIVER_AGGREGATION_ENABLE ifdefs
Greg Kroah-Hartman
gregkh at suse.de
Tue Sep 15 19:05:28 UTC 2009
From: Bartlomiej Zolnierkiewicz <bzolnier at gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier at gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh at suse.de>
---
drivers/staging/rtl8192su/Makefile | 1 -
.../rtl8192su/ieee80211/ieee80211_softmac.c | 8 -
drivers/staging/rtl8192su/ieee80211/rtl819x_HT.h | 3 -
.../staging/rtl8192su/ieee80211/rtl819x_HTProc.c | 3 -
drivers/staging/rtl8192su/r8192U.h | 31 --
drivers/staging/rtl8192su/r8192U_core.c | 327 --------------------
drivers/staging/rtl8192su/r819xU_HTType.h | 3 -
7 files changed, 0 insertions(+), 376 deletions(-)
diff --git a/drivers/staging/rtl8192su/Makefile b/drivers/staging/rtl8192su/Makefile
index c51889d..4037f92 100644
--- a/drivers/staging/rtl8192su/Makefile
+++ b/drivers/staging/rtl8192su/Makefile
@@ -12,7 +12,6 @@ EXTRA_CFLAGS += -DRTL8190_Download_Firmware_From_Header=1
EXTRA_CFLAGS += -DRTL8192S_PREPARE_FOR_NORMAL_RELEASE
EXTRA_CFLAGS += -DRTL8192SU_DISABLE_IQK=1
-#EXTRA_CFLAGS += -DUSB_TX_DRIVER_AGGREGATION_ENABLE=0
#EXTRA_CFLAGS += -DRTL8192SU_DISABLE_CCK_RATE=0
EXTRA_CFLAGS += -DRTL8192S_DISABLE_FW_DM=0
EXTRA_CFLAGS += -DDISABLE_BB_RF=0
diff --git a/drivers/staging/rtl8192su/ieee80211/ieee80211_softmac.c b/drivers/staging/rtl8192su/ieee80211/ieee80211_softmac.c
index e10060f..5dc1bd3 100644
--- a/drivers/staging/rtl8192su/ieee80211/ieee80211_softmac.c
+++ b/drivers/staging/rtl8192su/ieee80211/ieee80211_softmac.c
@@ -2237,11 +2237,7 @@ void ieee80211_softmac_xmit(struct ieee80211_txb *txb, struct ieee80211_device *
#if 1
/* if xmit available, just xmit it immediately, else just insert it to the wait queue */
for(i = 0; i < txb->nr_frags; i++) {
-#ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
- if ((skb_queue_len(&ieee->skb_drv_aggQ[queue_index]) != 0) ||
-#else
if ((skb_queue_len(&ieee->skb_waitQ[queue_index]) != 0) ||
-#endif
(!ieee->check_nic_enough_desc(ieee->dev,queue_index))||\
(ieee->queue_stop)) {
/* insert the skb packet to the wait queue */
@@ -2250,11 +2246,7 @@ void ieee80211_softmac_xmit(struct ieee80211_txb *txb, struct ieee80211_device *
* */
//printk("error:no descriptor left at queue_index %d, %d, %d\n", queue_index, skb_queue_len(&ieee->skb_waitQ[queue_index]), ieee->check_nic_enough_desc(ieee->dev,queue_index));
//ieee80211_stop_queue(ieee);
-#ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
- skb_queue_tail(&ieee->skb_drv_aggQ[queue_index], txb->fragments[i]);
-#else
skb_queue_tail(&ieee->skb_waitQ[queue_index], txb->fragments[i]);
-#endif
}else{
ieee->softmac_data_hard_start_xmit(
txb->fragments[i],
diff --git a/drivers/staging/rtl8192su/ieee80211/rtl819x_HT.h b/drivers/staging/rtl8192su/ieee80211/rtl819x_HT.h
index 22a3d45..a97c901 100644
--- a/drivers/staging/rtl8192su/ieee80211/rtl819x_HT.h
+++ b/drivers/staging/rtl8192su/ieee80211/rtl819x_HT.h
@@ -324,9 +324,6 @@ typedef struct _RT_HIGH_THROUGHPUT{
u8 RxReorderPendingTime;
u16 RxReorderDropCounter;
-#ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
- u8 UsbTxAggrNum;
-#endif
// Add for Broadcom(Linksys) IOT. Joseph
u8 bIsPeerBcm;
diff --git a/drivers/staging/rtl8192su/ieee80211/rtl819x_HTProc.c b/drivers/staging/rtl8192su/ieee80211/rtl819x_HTProc.c
index eca9ac2..ed5367d 100644
--- a/drivers/staging/rtl8192su/ieee80211/rtl819x_HTProc.c
+++ b/drivers/staging/rtl8192su/ieee80211/rtl819x_HTProc.c
@@ -102,9 +102,6 @@ void HTUpdateDefaultSetting(struct ieee80211_device* ieee)
pHTInfo->RxReorderWinSize = 64;
pHTInfo->RxReorderPendingTime = 30;
-#ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
- pHTInfo->UsbTxAggrNum = 4;
-#endif
}
diff --git a/drivers/staging/rtl8192su/r8192U.h b/drivers/staging/rtl8192su/r8192U.h
index c5bf13e..ff6af9b 100644
--- a/drivers/staging/rtl8192su/r8192U.h
+++ b/drivers/staging/rtl8192su/r8192U.h
@@ -465,30 +465,6 @@ typedef struct _tx_desc_819x_usb {
}tx_desc_819x_usb, *ptx_desc_819x_usb;
#endif
-#ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
-typedef struct _tx_desc_819x_usb_aggr_subframe {
- //DWORD 0
- u16 PktSize;
- u8 Offset;
- u8 TxFWInfoSize;
-
- //DWORD 1
- u8 RATid:3;
- u8 DISFB:1;
- u8 USERATE:1;
- u8 MOREFRAG:1;
- u8 NoEnc:1;
- u8 PIFS:1;
- u8 QueueSelect:5;
- u8 NoACM:1;
- u8 Reserved1:2;
- u8 SecCAMID:5;
- u8 SecDescAssign:1;
- u8 SecType:2;
- u8 PacketID:7;
- u8 OWN:1;
-}tx_desc_819x_usb_aggr_subframe, *ptx_desc_819x_usb_aggr_subframe;
-#endif
#ifdef RTL8192SU
@@ -868,17 +844,10 @@ typedef struct rx_drvinfo_819x_usb{
//#define TX_PACKET_SHIFT_BYTES (USB_HWDESC_HEADER_LEN + sizeof(tx_fwinfo_819x_usb))
#define MAX_FRAGMENT_COUNT 8
#ifdef RTL8192U
-#ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
-#define MAX_TRANSMIT_BUFFER_SIZE 32000
-#else
#define MAX_TRANSMIT_BUFFER_SIZE 8000
-#endif
#else
#define MAX_TRANSMIT_BUFFER_SIZE (1600+(MAX_802_11_HEADER_LENGTH+ENCRYPTION_MAX_OVERHEAD)*MAX_FRAGMENT_COUNT)
#endif
-#ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
-#define TX_PACKET_DRVAGGR_SUBFRAME_SHIFT_BYTES (sizeof(tx_desc_819x_usb_aggr_subframe) + sizeof(tx_fwinfo_819x_usb))
-#endif
#define scrclng 4 // octets for crc32 (FCS, ICV)
typedef enum rf_optype
diff --git a/drivers/staging/rtl8192su/r8192U_core.c b/drivers/staging/rtl8192su/r8192U_core.c
index 19ed783..5170723 100644
--- a/drivers/staging/rtl8192su/r8192U_core.c
+++ b/drivers/staging/rtl8192su/r8192U_core.c
@@ -2163,249 +2163,6 @@ int rtl8192_hard_start_xmit(struct sk_buff *skb,struct net_device *dev)
void rtl8192_try_wake_queue(struct net_device *dev, int pri);
-#ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
-u16 DrvAggr_PaddingAdd(struct net_device *dev, struct sk_buff *skb)
-{
- u16 PaddingNum = 256 - ((skb->len + TX_PACKET_DRVAGGR_SUBFRAME_SHIFT_BYTES) % 256);
- return (PaddingNum&0xff);
-}
-
-u8 MRateToHwRate8190Pci(u8 rate);
-u8 QueryIsShort(u8 TxHT, u8 TxRate, cb_desc *tcb_desc);
-u8 MapHwQueueToFirmwareQueue(u8 QueueID);
-struct sk_buff *DrvAggr_Aggregation(struct net_device *dev, struct ieee80211_drv_agg_txb *pSendList)
-{
- struct ieee80211_device *ieee = netdev_priv(dev);
- struct r8192_priv *priv = ieee80211_priv(dev);
- cb_desc *tcb_desc = NULL;
- u8 i;
- u32 TotalLength;
- struct sk_buff *skb;
- struct sk_buff *agg_skb;
- tx_desc_819x_usb_aggr_subframe *tx_agg_desc = NULL;
- tx_fwinfo_819x_usb *tx_fwinfo = NULL;
-
- //
- // Local variable initialization.
- //
- /* first skb initialization */
- skb = pSendList->tx_agg_frames[0];
- TotalLength = skb->len;
-
- /* Get the total aggregation length including the padding space and
- * sub frame header.
- */
- for(i = 1; i < pSendList->nr_drv_agg_frames; i++) {
- TotalLength += DrvAggr_PaddingAdd(dev, skb);
- skb = pSendList->tx_agg_frames[i];
- TotalLength += (skb->len + TX_PACKET_DRVAGGR_SUBFRAME_SHIFT_BYTES);
- }
-
- /* allocate skb to contain the aggregated packets */
- agg_skb = dev_alloc_skb(TotalLength + ieee->tx_headroom);
- memset(agg_skb->data, 0, agg_skb->len);
- skb_reserve(agg_skb, ieee->tx_headroom);
-
-// RT_DEBUG_DATA(COMP_SEND, skb->cb, sizeof(skb->cb));
- /* reserve info for first subframe Tx descriptor to be set in the tx function */
- skb = pSendList->tx_agg_frames[0];
- tcb_desc = (cb_desc *)(skb->cb + MAX_DEV_ADDR_SIZE);
- tcb_desc->drv_agg_enable = 1;
- tcb_desc->pkt_size = skb->len;
- tcb_desc->DrvAggrNum = pSendList->nr_drv_agg_frames;
- printk("DrvAggNum = %d\n", tcb_desc->DrvAggrNum);
-// RT_DEBUG_DATA(COMP_SEND, skb->cb, sizeof(skb->cb));
-// printk("========>skb->data ======> \n");
-// RT_DEBUG_DATA(COMP_SEND, skb->data, skb->len);
- memcpy(agg_skb->cb, skb->cb, sizeof(skb->cb));
- memcpy(skb_put(agg_skb,skb->len),skb->data,skb->len);
-
- for(i = 1; i < pSendList->nr_drv_agg_frames; i++) {
- /* push the next sub frame to be 256 byte aline */
- skb_put(agg_skb,DrvAggr_PaddingAdd(dev,skb));
-
- /* Subframe drv Tx descriptor and firmware info setting */
- skb = pSendList->tx_agg_frames[i];
- tcb_desc = (cb_desc *)(skb->cb + MAX_DEV_ADDR_SIZE);
- tx_agg_desc = (tx_desc_819x_usb_aggr_subframe *)agg_skb->tail;
- tx_fwinfo = (tx_fwinfo_819x_usb *)(agg_skb->tail + sizeof(tx_desc_819x_usb_aggr_subframe));
-
- memset(tx_fwinfo,0,sizeof(tx_fwinfo_819x_usb));
- /* DWORD 0 */
- tx_fwinfo->TxHT = (tcb_desc->data_rate&0x80)?1:0;
- tx_fwinfo->TxRate = MRateToHwRate8190Pci(tcb_desc->data_rate);
- tx_fwinfo->EnableCPUDur = tcb_desc->bTxEnableFwCalcDur;
- tx_fwinfo->Short = QueryIsShort(tx_fwinfo->TxHT, tx_fwinfo->TxRate, tcb_desc);
- if(tcb_desc->bAMPDUEnable) {//AMPDU enabled
- tx_fwinfo->AllowAggregation = 1;
- /* DWORD 1 */
- tx_fwinfo->RxMF = tcb_desc->ampdu_factor;
- tx_fwinfo->RxAMD = tcb_desc->ampdu_density&0x07;//ampdudensity
- } else {
- tx_fwinfo->AllowAggregation = 0;
- /* DWORD 1 */
- tx_fwinfo->RxMF = 0;
- tx_fwinfo->RxAMD = 0;
- }
-
- /* Protection mode related */
- tx_fwinfo->RtsEnable = (tcb_desc->bRTSEnable)?1:0;
- tx_fwinfo->CtsEnable = (tcb_desc->bCTSEnable)?1:0;
- tx_fwinfo->RtsSTBC = (tcb_desc->bRTSSTBC)?1:0;
- tx_fwinfo->RtsHT = (tcb_desc->rts_rate&0x80)?1:0;
- tx_fwinfo->RtsRate = MRateToHwRate8190Pci((u8)tcb_desc->rts_rate);
- tx_fwinfo->RtsSubcarrier = (tx_fwinfo->RtsHT==0)?(tcb_desc->RTSSC):0;
- tx_fwinfo->RtsBandwidth = (tx_fwinfo->RtsHT==1)?((tcb_desc->bRTSBW)?1:0):0;
- tx_fwinfo->RtsShort = (tx_fwinfo->RtsHT==0)?(tcb_desc->bRTSUseShortPreamble?1:0):\
- (tcb_desc->bRTSUseShortGI?1:0);
-
- /* Set Bandwidth and sub-channel settings. */
- if(priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20_40)
- {
- if(tcb_desc->bPacketBW) {
- tx_fwinfo->TxBandwidth = 1;
- tx_fwinfo->TxSubCarrier = 0; //By SD3's Jerry suggestion, use duplicated mode
- } else {
- tx_fwinfo->TxBandwidth = 0;
- tx_fwinfo->TxSubCarrier = priv->nCur40MhzPrimeSC;
- }
- } else {
- tx_fwinfo->TxBandwidth = 0;
- tx_fwinfo->TxSubCarrier = 0;
- }
-
- /* Fill Tx descriptor */
- memset(tx_agg_desc, 0, sizeof(tx_desc_819x_usb_aggr_subframe));
- /* DWORD 0 */
- //tx_agg_desc->LINIP = 0;
- //tx_agg_desc->CmdInit = 1;
- tx_agg_desc->Offset = sizeof(tx_fwinfo_819x_usb) + 8;
- /* already raw data, need not to substract header length */
- tx_agg_desc->PktSize = skb->len & 0xffff;
-
- /*DWORD 1*/
- tx_agg_desc->SecCAMID= 0;
- tx_agg_desc->RATid = tcb_desc->RATRIndex;
-#if 0
- /* Fill security related */
- if( pTcb->bEncrypt && !Adapter->MgntInfo.SecurityInfo.SWTxEncryptFlag)
- {
- EncAlg = SecGetEncryptionOverhead(
- Adapter,
- &EncryptionMPDUHeadOverhead,
- &EncryptionMPDUTailOverhead,
- NULL,
- NULL,
- FALSE,
- FALSE);
- //2004/07/22, kcwu, EncryptionMPDUHeadOverhead has been added in previous code
- //MPDUOverhead = EncryptionMPDUHeadOverhead + EncryptionMPDUTailOverhead;
- MPDUOverhead = EncryptionMPDUTailOverhead;
- tx_agg_desc->NoEnc = 0;
- RT_TRACE(COMP_SEC, DBG_LOUD, ("******We in the loop SecCAMID is %d SecDescAssign is %d The Sec is %d********\n",tx_agg_desc->SecCAMID,tx_agg_desc->SecDescAssign,EncAlg));
- //CamDumpAll(Adapter);
- }
- else
-#endif
- {
- //MPDUOverhead = 0;
- tx_agg_desc->NoEnc = 1;
- }
-#if 0
- switch(EncAlg){
- case NO_Encryption:
- tx_agg_desc->SecType = 0x0;
- break;
- case WEP40_Encryption:
- case WEP104_Encryption:
- tx_agg_desc->SecType = 0x1;
- break;
- case TKIP_Encryption:
- tx_agg_desc->SecType = 0x2;
- break;
- case AESCCMP_Encryption:
- tx_agg_desc->SecType = 0x3;
- break;
- default:
- tx_agg_desc->SecType = 0x0;
- break;
- }
-#else
- tx_agg_desc->SecType = 0x0;
-#endif
-
- if (tcb_desc->bHwSec) {
- switch (priv->ieee80211->pairwise_key_type)
- {
- case KEY_TYPE_WEP40:
- case KEY_TYPE_WEP104:
- tx_agg_desc->SecType = 0x1;
- tx_agg_desc->NoEnc = 0;
- break;
- case KEY_TYPE_TKIP:
- tx_agg_desc->SecType = 0x2;
- tx_agg_desc->NoEnc = 0;
- break;
- case KEY_TYPE_CCMP:
- tx_agg_desc->SecType = 0x3;
- tx_agg_desc->NoEnc = 0;
- break;
- case KEY_TYPE_NA:
- tx_agg_desc->SecType = 0x0;
- tx_agg_desc->NoEnc = 1;
- break;
- }
- }
-
- tx_agg_desc->QueueSelect = MapHwQueueToFirmwareQueue(tcb_desc->queue_index);
- tx_agg_desc->TxFWInfoSize = sizeof(tx_fwinfo_819x_usb);
-
- tx_agg_desc->DISFB = tcb_desc->bTxDisableRateFallBack;
- tx_agg_desc->USERATE = tcb_desc->bTxUseDriverAssingedRate;
-
- tx_agg_desc->OWN = 1;
-
- //DWORD 2
- /* According windows driver, it seems that there no need to fill this field */
- //tx_agg_desc->TxBufferSize= (u32)(skb->len - USB_HWDESC_HEADER_LEN);
-
- /* to fill next packet */
- skb_put(agg_skb,TX_PACKET_DRVAGGR_SUBFRAME_SHIFT_BYTES);
- memcpy(skb_put(agg_skb,skb->len),skb->data,skb->len);
- }
-
- for(i = 0; i < pSendList->nr_drv_agg_frames; i++) {
- dev_kfree_skb_any(pSendList->tx_agg_frames[i]);
- }
-
- return agg_skb;
-}
-
-/* NOTE:
- This function return a list of PTCB which is proper to be aggregate with the input TCB.
- If no proper TCB is found to do aggregation, SendList will only contain the input TCB.
-*/
-u8 DrvAggr_GetAggregatibleList(struct net_device *dev, struct sk_buff *skb,
- struct ieee80211_drv_agg_txb *pSendList)
-{
- struct ieee80211_device *ieee = netdev_priv(dev);
- PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo;
- u16 nMaxAggrNum = pHTInfo->UsbTxAggrNum;
- cb_desc *tcb_desc = (cb_desc *)(skb->cb + MAX_DEV_ADDR_SIZE);
- u8 QueueID = tcb_desc->queue_index;
-
- do {
- pSendList->tx_agg_frames[pSendList->nr_drv_agg_frames++] = skb;
- if(pSendList->nr_drv_agg_frames >= nMaxAggrNum) {
- break;
- }
-
- } while((skb = skb_dequeue(&ieee->skb_drv_aggQ[QueueID])));
-
- RT_TRACE(COMP_AMSDU, "DrvAggr_GetAggregatibleList, nAggrTcbNum = %d \n", pSendList->nr_drv_agg_frames);
- return pSendList->nr_drv_agg_frames;
-}
-#endif
static void rtl8192_tx_isr(struct urb *tx_urb)
{
@@ -2490,54 +2247,6 @@ static void rtl8192_tx_isr(struct urb *tx_urb)
return; //modified by david to avoid further processing AMSDU
}
-#ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
- else if ((skb_queue_len(&priv->ieee80211->skb_drv_aggQ[queue_index])!= 0)&&\
- (!(priv->ieee80211->queue_stop))) {
- // Tx Driver Aggregation process
- /* The driver will aggregation the packets according to the following stets
- * 1. check whether there's tx irq available, for it's a completion return
- * function, it should contain enough tx irq;
- * 2. check pakcet type;
- * 3. intialize sendlist, check whether the to-be send packet no greater than 1
- * 4. aggregation the packets, and fill firmware info and tx desc to it, etc.
- * 5. check whehter the packet could be sent, otherwise just insert to wait head
- * */
- skb = skb_dequeue(&priv->ieee80211->skb_drv_aggQ[queue_index]);
- if(!check_nic_enough_desc(dev, queue_index)) {
- skb_queue_head(&(priv->ieee80211->skb_drv_aggQ[queue_index]), skb);
- return;
- }
-
- {
- /*TODO*/
- /*
- u8* pHeader = skb->data;
-
- if(IsMgntQosData(pHeader) ||
- IsMgntQData_Ack(pHeader) ||
- IsMgntQData_Poll(pHeader) ||
- IsMgntQData_Poll_Ack(pHeader)
- )
- */
- {
- struct ieee80211_drv_agg_txb SendList;
-
- memset(&SendList, 0, sizeof(struct ieee80211_drv_agg_txb));
- if(DrvAggr_GetAggregatibleList(dev, skb, &SendList) > 1) {
- skb = DrvAggr_Aggregation(dev, &SendList);
-
-#if 0
- printk("=============>to send aggregated packet!\n");
- RT_DEBUG_DATA(COMP_SEND, skb->cb, sizeof(skb->cb));
- printk("\n=================skb->len = %d\n", skb->len);
- RT_DEBUG_DATA(COMP_SEND, skb->data, skb->len);
-#endif
- }
- }
- priv->ieee80211->softmac_hard_start_xmit(skb, dev);
- }
- }
-#endif
}
}
@@ -3343,12 +3052,6 @@ short rtl8192SU_tx(struct net_device *dev, struct sk_buff* skb)
tx_desc->TxSubCarrier = 0;
}
-#ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
- if (tcb_desc->drv_agg_enable)
- {
- //tx_desc->Tx_INFO_RSVD = (tcb_desc->DrvAggrNum & 0x1f) << 1; //92su del
- }
-#endif
//memset(tx_desc, 0, sizeof(tx_desc_819x_usb));
/* DWORD 0 */
@@ -3356,11 +3059,6 @@ short rtl8192SU_tx(struct net_device *dev, struct sk_buff* skb)
//tx_desc->CmdInit = 1; //92su del
tx_desc->Offset = USB_HWDESC_HEADER_LEN;
-#ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
- if (tcb_desc->drv_agg_enable) {
- tx_desc->PktSize = tcb_desc->pkt_size;//FIXLZM
- } else
-#endif
{
tx_desc->PktSize = (skb->len - USB_HWDESC_HEADER_LEN) & 0xffff;
}
@@ -3469,11 +3167,6 @@ short rtl8192SU_tx(struct net_device *dev, struct sk_buff* skb)
#endif
tx_desc->OWN = 1;
-#ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
- if (tcb_desc->drv_agg_enable) {
- tx_desc->TxBufferSize = tcb_desc->pkt_size + sizeof(tx_fwinfo_819x_usb);
- } else
-#endif
{
//DWORD 2
//tx_desc->TxBufferSize = (u32)(skb->len - USB_HWDESC_HEADER_LEN);
@@ -3653,12 +3346,6 @@ short rtl8192_tx(struct net_device *dev, struct sk_buff* skb)
tx_fwinfo->TxSubCarrier = 0;
}
-#ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
- if (tcb_desc->drv_agg_enable)
- {
- tx_fwinfo->Tx_INFO_RSVD = (tcb_desc->DrvAggrNum & 0x1f) << 1;
- }
-#endif
/* Fill Tx descriptor */
memset(tx_desc, 0, sizeof(tx_desc_819x_usb));
/* DWORD 0 */
@@ -3666,11 +3353,6 @@ short rtl8192_tx(struct net_device *dev, struct sk_buff* skb)
tx_desc->CmdInit = 1;
tx_desc->Offset = sizeof(tx_fwinfo_819x_usb) + 8;
-#ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
- if (tcb_desc->drv_agg_enable) {
- tx_desc->PktSize = tcb_desc->pkt_size;
- } else
-#endif
{
tx_desc->PktSize = (skb->len - TX_PACKET_SHIFT_BYTES) & 0xffff;
}
@@ -3766,11 +3448,6 @@ short rtl8192_tx(struct net_device *dev, struct sk_buff* skb)
#endif
tx_desc->OWN = 1;
-#ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
- if (tcb_desc->drv_agg_enable) {
- tx_desc->TxBufferSize = tcb_desc->pkt_size + sizeof(tx_fwinfo_819x_usb);
- } else
-#endif
{
//DWORD 2
tx_desc->TxBufferSize = (u32)(skb->len - USB_HWDESC_HEADER_LEN);
@@ -8017,11 +7694,7 @@ TxCheckStuck(struct net_device *dev)
if(QueueID == TXCMD_QUEUE)
continue;
#if 1
-#ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
- if((skb_queue_len(&priv->ieee80211->skb_waitQ[QueueID]) == 0) && (skb_queue_len(&priv->ieee80211->skb_aggQ[QueueID]) == 0) && (skb_queue_len(&priv->ieee80211->skb_drv_aggQ[QueueID]) == 0))
-#else
if((skb_queue_len(&priv->ieee80211->skb_waitQ[QueueID]) == 0) && (skb_queue_len(&priv->ieee80211->skb_aggQ[QueueID]) == 0))
-#endif
continue;
#endif
diff --git a/drivers/staging/rtl8192su/r819xU_HTType.h b/drivers/staging/rtl8192su/r819xU_HTType.h
index 4ccfcc1..3f379e0 100644
--- a/drivers/staging/rtl8192su/r819xU_HTType.h
+++ b/drivers/staging/rtl8192su/r819xU_HTType.h
@@ -293,9 +293,6 @@ typedef struct _RT_HIGH_THROUGHPUT{
u8 RxReorderPendingTime;
u16 RxReorderDropCounter;
-#ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
- u8 UsbTxAggrNum;
-#endif
// Add for Broadcom(Linksys) IOT. Joseph
u8 bIsPeerBcm;
--
1.6.4.2
More information about the devel
mailing list