[PATCH 220/342] Staging: rt3070: remove dead LEAP_SUPPORT code
Greg Kroah-Hartman
gregkh at suse.de
Fri Jun 19 18:07:24 UTC 2009
From: Bartlomiej Zolnierkiewicz <bzolnier at gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier at gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh at suse.de>
---
drivers/staging/rt3070/common/cmm_sanity.c | 6 -
drivers/staging/rt3070/common/mlme.c | 15 --
drivers/staging/rt3070/common/rtmp_init.c | 7 -
drivers/staging/rt3070/leap.h | 215 ----------------------------
drivers/staging/rt3070/rt_config.h | 4 -
drivers/staging/rt3070/rt_linux.c | 3 -
drivers/staging/rt3070/rt_linux.h | 3 -
drivers/staging/rt3070/sta/assoc.c | 166 ---------------------
drivers/staging/rt3070/sta/auth.c | 14 --
drivers/staging/rt3070/sta/auth_rsp.c | 15 --
drivers/staging/rt3070/sta/connect.c | 64 +--------
drivers/staging/rt3070/sta/rtmp_data.c | 27 ----
drivers/staging/rt3070/sta/sync.c | 9 --
13 files changed, 1 insertions(+), 547 deletions(-)
delete mode 100644 drivers/staging/rt3070/leap.h
diff --git a/drivers/staging/rt3070/common/cmm_sanity.c b/drivers/staging/rt3070/common/cmm_sanity.c
index aa8ea71..95d0a0e 100644
--- a/drivers/staging/rt3070/common/cmm_sanity.c
+++ b/drivers/staging/rt3070/common/cmm_sanity.c
@@ -968,9 +968,6 @@ BOOLEAN PeerAuthSanity(
NdisMoveMemory(pStatus, &pFrame->Octet[4], 2);
if ((*pAlg == Ndis802_11AuthModeOpen)
-#ifdef LEAP_SUPPORT
- || (*pAlg == CISCO_AuthModeLEAP)
-#endif // LEAP_SUPPORT //
)
{
if (*pSeq == 1 || *pSeq == 2)
@@ -1031,9 +1028,6 @@ BOOLEAN MlmeAuthReqSanity(
*pAlg = pInfo->Alg;
if (((*pAlg == Ndis802_11AuthModeShared) ||(*pAlg == Ndis802_11AuthModeOpen)
-#ifdef LEAP_SUPPORT
- || (*pAlg == CISCO_AuthModeLEAP)
-#endif // LEAP_SUPPORT //
) &&
((*pAddr & 0x01) == 0))
{
diff --git a/drivers/staging/rt3070/common/mlme.c b/drivers/staging/rt3070/common/mlme.c
index 6251cf0..d15e9da 100644
--- a/drivers/staging/rt3070/common/mlme.c
+++ b/drivers/staging/rt3070/common/mlme.c
@@ -622,11 +622,6 @@ VOID MlmeHandler(
case WPA_PSK_STATE_MACHINE:
StateMachinePerformAction(pAd, &pAd->Mlme.WpaPskMachine, Elem);
break;
-#ifdef LEAP_SUPPORT
- case LEAP_STATE_MACHINE:
- LeapMachinePerformAction(pAd, &pAd->Mlme.LeapMachine, Elem);
- break;
-#endif
case AIRONET_STATE_MACHINE:
StateMachinePerformAction(pAd, &pAd->Mlme.AironetMachine, Elem);
break;
@@ -4982,16 +4977,6 @@ BOOLEAN MsgTypeSubst(
*MsgType = MT2_AIRONET_MSG;
return (TRUE);
}
-#ifdef LEAP_SUPPORT
- if ( pAd->StaCfg.LeapAuthMode == CISCO_AuthModeLEAP ) //LEAP
- {
- // LEAP frames
- *Machine = LEAP_STATE_MACHINE;
- EAPType = *((UCHAR*)pFrame + LENGTH_802_11 + LENGTH_802_1_H + 1);
- return (LeapMsgTypeSubst(EAPType, MsgType));
- }
- else
-#endif // LEAP_SUPPORT //
{
*Machine = WPA_PSK_STATE_MACHINE;
EAPType = *((UCHAR*)pFrame + LENGTH_802_11 + LENGTH_802_1_H + 1);
diff --git a/drivers/staging/rt3070/common/rtmp_init.c b/drivers/staging/rt3070/common/rtmp_init.c
index d52fc34..68028f6 100644
--- a/drivers/staging/rt3070/common/rtmp_init.c
+++ b/drivers/staging/rt3070/common/rtmp_init.c
@@ -3411,13 +3411,6 @@ VOID UserCfgInit(
pAd->StaCfg.WindowsBatteryPowerMode = Ndis802_11PowerModeCAM;
pAd->StaCfg.bWindowsACCAMEnable = FALSE;
-#ifdef LEAP_SUPPORT
- // CCX v1.0 releated init value
- RTMPInitTimer(pAd, &pAd->StaCfg.LeapAuthTimer, GET_TIMER_FUNCTION(LeapAuthTimeout), pAd, FALSE);
- pAd->StaCfg.LeapAuthMode = CISCO_AuthModeLEAPNone;
- pAd->StaCfg.bCkipOn = FALSE;
-#endif // LEAP_SUPPORT //
-
RTMPInitTimer(pAd, &pAd->StaCfg.StaQuickResponeForRateUpTimer, GET_TIMER_FUNCTION(StaQuickResponeForRateUpExec), pAd, FALSE);
pAd->StaCfg.StaQuickResponeForRateUpTimerRunning = FALSE;
diff --git a/drivers/staging/rt3070/leap.h b/drivers/staging/rt3070/leap.h
deleted file mode 100644
index 6818c1f..0000000
--- a/drivers/staging/rt3070/leap.h
+++ /dev/null
@@ -1,215 +0,0 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the *
- * Free Software Foundation, Inc., *
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
- * *
- *************************************************************************
-
- Module Name:
- leap.h
-
- Abstract:
-
- Revision History:
- Who When What
- -------- ---------- ----------------------------------------------
- Name Date Modification logs
-*/
-#ifndef __LEAP_H__
-#define __LEAP_H__
-
-// Messages for Associate state machine
-#define LEAP_MACHINE_BASE 30
-
-#define LEAP_MSG_REQUEST_IDENTITY 31
-#define LEAP_MSG_REQUEST_LEAP 32
-#define LEAP_MSG_SUCCESS 33
-#define LEAP_MSG_FAILED 34
-#define LEAP_MSG_RESPONSE_LEAP 35
-#define LEAP_MSG_EAPOLKEY 36
-#define LEAP_MSG_UNKNOWN 37
-#define LEAP_MSG 38
-//! assoc state-machine states
-#define LEAP_IDLE 0
-#define LEAP_WAIT_IDENTITY_REQUEST 1
-#define LEAP_WAIT_CHANLLENGE_REQUEST 2
-#define LEAP_WAIT_SUCCESS 3
-#define LEAP_WAIT_CHANLLENGE_RESPONSE 4
-#define LEAP_WAIT_EAPOLKEY 5
-
-#define LEAP_REASON_INVALID_AUTH 0x01
-#define LEAP_REASON_AUTH_TIMEOUT 0x02
-#define LEAP_REASON_CHALLENGE_FROM_AP_FAILED 0x03
-#define LEAP_REASON_CHALLENGE_TO_AP_FAILED 0x04
-
-#define CISCO_AuthModeLEAP 0x80
-#define CISCO_AuthModeLEAPNone 0x00
-#define LEAP_AUTH_TIMEOUT 30000
-#define LEAP_CHALLENGE_RESPONSE_LENGTH 24
-#define LEAP_CHALLENGE_REQUEST_LENGTH 8
-
-typedef struct _LEAP_EAPOL_HEADER_ {
- UCHAR Version;
- UCHAR Type;
- UCHAR Length[2];
-} LEAP_EAPOL_HEADER, *PLEAP_EAPOL_HEADER;
-
-typedef struct _LEAP_EAPOL_PACKET_ {
- UCHAR Code;
- UCHAR Identifier;
- UCHAR Length[2];
- UCHAR Type;
-} LEAP_EAPOL_PACKET, *PLEAP_EAPOL_PACKET;
-
-typedef struct _LEAP_EAP_CONTENTS_ {
- UCHAR Version;
- UCHAR Reserved;
- UCHAR Length;
-} LEAP_EAP_CONTENTS, *PLEAP_EAP_CONTENTS;
-
-/*** EAPOL key ***/
-typedef struct _EAPOL_KEY_HEADER_ {
- UCHAR Type;
- UCHAR Length[2];
- UCHAR Counter[8];
- UCHAR IV[16];
- UCHAR Index;
- UCHAR Signature[16];
-} EAPOL_KEY_HEADER, *PEAPOL_KEY_HEADER;
-
-BOOLEAN LeapMsgTypeSubst(
- IN UCHAR EAPType,
- OUT ULONG *MsgType);
-
-VOID LeapMachinePerformAction(
- IN PRTMP_ADAPTER pAd,
- IN STATE_MACHINE *S,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID LeapMacHeaderInit(
- IN PRTMP_ADAPTER pAd,
- IN OUT PHEADER_802_11 pHdr80211,
- IN UCHAR wep,
- IN PUCHAR pAddr3);
-
-VOID LeapStartAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID LeapIdentityAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID LeapPeerChallengeAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID HashPwd(
- IN PUCHAR pwd,
- IN INT pwdlen,
- OUT PUCHAR hash);
-
-VOID PeerChallengeResponse(
- IN PUCHAR szChallenge,
- IN PUCHAR smbPasswd,
- OUT PUCHAR szResponse);
-
-VOID ParityKey(
- OUT PUCHAR szOut,
- IN PUCHAR szIn);
-
-VOID DesKey(
- OUT ULONG k[16][2],
- IN PUCHAR key,
- IN INT decrypt);
-
-VOID Des(
- IN ULONG ks[16][2],
- OUT UCHAR block[8]);
-
-VOID DesEncrypt(
- IN PUCHAR szClear,
- IN PUCHAR szKey,
- OUT PUCHAR szOut);
-
-VOID LeapNetworkChallengeAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID LeapNetworkChallengeResponse(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID HashpwdHash(
- IN PUCHAR hash,
- IN PUCHAR hashhash);
-
-VOID ProcessSessionKey(
- OUT PUCHAR SessionKey,
- IN PUCHAR hash2,
- IN PUCHAR ChallengeToRadius,
- IN PUCHAR ChallengeResponseFromRadius,
- IN PUCHAR ChallengeFromRadius,
- IN PUCHAR ChallengeResponseToRadius);
-
-VOID LeapEapolKeyAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID RogueApTableInit(
- IN ROGUEAP_TABLE *Tab);
-
-ULONG RogueApTableSearch(
- IN ROGUEAP_TABLE *Tab,
- IN PUCHAR pAddr);
-
-VOID RogueApEntrySet(
- IN PRTMP_ADAPTER pAd,
- OUT ROGUEAP_ENTRY *pRogueAp,
- IN PUCHAR pAddr,
- IN UCHAR FaileCode);
-
-ULONG RogueApTableSetEntry(
- IN PRTMP_ADAPTER pAd,
- OUT ROGUEAP_TABLE *Tab,
- IN PUCHAR pAddr,
- IN UCHAR FaileCode);
-
-VOID RogueApTableDeleteEntry(
- IN OUT ROGUEAP_TABLE *Tab,
- IN PUCHAR pAddr);
-
-VOID LeapAuthTimeout(
- IN PVOID SystemSpecific1,
- IN PVOID FunctionContext,
- IN PVOID SystemSpecific2,
- IN PVOID SystemSpecific3);
-
-VOID LeapSendRogueAPReport(
- IN PRTMP_ADAPTER pAd);
-
-BOOLEAN CCKMAssocRspSanity(
- IN PRTMP_ADAPTER pAd,
- IN VOID *Msg,
- IN ULONG MsgLen);
-
-#endif // __LEAP_H__
diff --git a/drivers/staging/rt3070/rt_config.h b/drivers/staging/rt3070/rt_config.h
index f02ea18..480e22f 100644
--- a/drivers/staging/rt3070/rt_config.h
+++ b/drivers/staging/rt3070/rt_config.h
@@ -62,10 +62,6 @@
#include "chlist.h"
#include "spectrum.h"
-#ifdef LEAP_SUPPORT
-#include "leap.h"
-#endif // LEAP_SUPPORT //
-
#ifdef CONFIG_STA_SUPPORT
#endif // CONFIG_STA_SUPPORT //
diff --git a/drivers/staging/rt3070/rt_linux.c b/drivers/staging/rt3070/rt_linux.c
index 252c63a..555d864 100644
--- a/drivers/staging/rt3070/rt_linux.c
+++ b/drivers/staging/rt3070/rt_linux.c
@@ -47,9 +47,6 @@ BUILD_TIMER_FUNCTION(AssocTimeout);
BUILD_TIMER_FUNCTION(ReassocTimeout);
BUILD_TIMER_FUNCTION(DisassocTimeout);
BUILD_TIMER_FUNCTION(LinkDownExec);
-#ifdef LEAP_SUPPORT
-BUILD_TIMER_FUNCTION(LeapAuthTimeout);
-#endif
BUILD_TIMER_FUNCTION(StaQuickResponeForRateUpExec);
BUILD_TIMER_FUNCTION(WpaDisassocApAndBlockAssoc);
#endif // CONFIG_STA_SUPPORT //
diff --git a/drivers/staging/rt3070/rt_linux.h b/drivers/staging/rt3070/rt_linux.h
index a18c416..dc4d2cf 100644
--- a/drivers/staging/rt3070/rt_linux.h
+++ b/drivers/staging/rt3070/rt_linux.h
@@ -522,9 +522,6 @@ DECLARE_TIMER_FUNCTION(AssocTimeout);
DECLARE_TIMER_FUNCTION(ReassocTimeout);
DECLARE_TIMER_FUNCTION(DisassocTimeout);
DECLARE_TIMER_FUNCTION(LinkDownExec);
-#ifdef LEAP_SUPPORT
-DECLARE_TIMER_FUNCTION(LeapAuthTimeout);
-#endif
DECLARE_TIMER_FUNCTION(StaQuickResponeForRateUpExec);
DECLARE_TIMER_FUNCTION(WpaDisassocApAndBlockAssoc);
DECLARE_TIMER_FUNCTION(PsPollWakeExec);
diff --git a/drivers/staging/rt3070/sta/assoc.c b/drivers/staging/rt3070/sta/assoc.c
index 8113b00..f041d7e 100644
--- a/drivers/staging/rt3070/sta/assoc.c
+++ b/drivers/staging/rt3070/sta/assoc.c
@@ -581,34 +581,6 @@ VOID MlmeAssocReqAction(
END_OF_ARGS);
FrameLen += tmp;
- //
- // Add CipherSuite CCKM or LeapTkip if setting.
- //
-#ifdef LEAP_SUPPORT
- if (LEAP_CCKM_ON(pAd))
- {
- MakeOutgoingFrame(pOutBuffer + FrameLen, &tmp,
- CipherSuiteCiscoCCKMLen, CipherSuiteCiscoCCKM,
- END_OF_ARGS);
- FrameLen += tmp;
-
- // Third add RSN
- NdisMoveMemory(pAd->StaCfg.ReqVarIEs + VarIesOffset, CipherSuiteCiscoCCKM, CipherSuiteCiscoCCKMLen); //Save CipherSuite
- VarIesOffset += CipherSuiteCiscoCCKMLen;
- }
- else if ((pAd->StaCfg.LeapAuthMode == CISCO_AuthModeLEAP) && (pAd->StaCfg.WepStatus == Ndis802_11Encryption2Enabled))
- {
- MakeOutgoingFrame(pOutBuffer + FrameLen, &tmp,
- CipherSuiteCCXTkipLen, CipherSuiteCCXTkip,
- END_OF_ARGS);
- FrameLen += tmp;
-
- // Third add RSN
- NdisMoveMemory(pAd->StaCfg.ReqVarIEs + VarIesOffset, CipherSuiteCCXTkip, CipherSuiteCCXTkipLen);
- VarIesOffset += CipherSuiteCCXTkipLen;
- }
-#endif // LEAP_SUPPORT //
-
// Add by James 03/06/27
// Set Variable IEs Length
pAd->StaCfg.ReqVarIELen = VarIesOffset;
@@ -668,23 +640,6 @@ VOID MlmeReassocReqAction(
NDIS_STATUS NStatus;
ULONG tmp;
PUCHAR pOutBuffer = NULL;
-//CCX 2.X
-#ifdef LEAP_SUPPORT
- UCHAR CkipFlag;
- UCHAR CkipNegotiationBuffer[CKIP_NEGOTIATION_LENGTH];
- UCHAR AironetCkipIe = IE_AIRONET_CKIP;
- UCHAR AironetCkipLen = CKIP_NEGOTIATION_LENGTH;
- UCHAR AironetIPAddressIE = IE_AIRONET_IPADDRESS;
- UCHAR AironetIPAddressLen = AIRONET_IPADDRESS_LENGTH;
- UCHAR AironetIPAddressBuffer[AIRONET_IPADDRESS_LENGTH] = {0x00, 0x40, 0x96, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00};
- UCHAR AironetCCKMReassocIE = IE_AIRONET_CCKMREASSOC;
- UCHAR AironetCCKMReassocLen = AIRONET_CCKMREASSOC_LENGTH;
- UCHAR AironetCCKMReassocBuffer[AIRONET_CCKMREASSOC_LENGTH];
- UCHAR AironetOUI[] = {0x00, 0x40, 0x96, 0x00};
- UCHAR MICMN[16];
- UCHAR CalcMicBuffer[80];
- ULONG CalcMicBufferLen = 0;
-#endif // LEAP_SUPPORT //
USHORT Status;
// Block all authentication request durning WPA block period
@@ -826,73 +781,6 @@ VOID MlmeReassocReqAction(
END_OF_ARGS);
FrameLen += TmpLen;
}
-#ifdef LEAP_SUPPORT
- if (LEAP_CCKM_ON(pAd) && (pAd->StaCfg.CCKMLinkUpFlag == TRUE))
- {
- CkipFlag = pAd->StaCfg.CkipFlag; // We have update that at PeerBeaconAtJoinRequest()
- if (CkipFlag != 0)
- {
- NdisZeroMemory(CkipNegotiationBuffer, CKIP_NEGOTIATION_LENGTH);
- CkipNegotiationBuffer[2] = 0x66;
- // Make it try KP & MIC, since we have to follow the result from AssocRsp
- CkipNegotiationBuffer[8] = 0x18;
- CkipNegotiationBuffer[CKIP_NEGOTIATION_LENGTH - 1] = 0x22;
-
- MakeOutgoingFrame(pOutBuffer + FrameLen, &tmp,
- 1, &AironetCkipIe,
- 1, &AironetCkipLen,
- AironetCkipLen, CkipNegotiationBuffer,
- END_OF_ARGS);
- FrameLen += tmp;
- }
-
- MakeOutgoingFrame(pOutBuffer + FrameLen, &tmp,
- 1, &AironetIPAddressIE,
- 1, &AironetIPAddressLen,
- AironetIPAddressLen, AironetIPAddressBuffer,
- END_OF_ARGS);
- FrameLen += tmp;
-
- //
- // The RN is incremented before each reassociation request.
- //
- pAd->StaCfg.CCKMRN++;
- //
- // Calculate MIC = hmac-md5(krk, STA-ID|BSSID|RSNIE|TSF|RN);
- //
- COPY_MAC_ADDR(CalcMicBuffer, pAd->CurrentAddress);
- CalcMicBufferLen = MAC_ADDR_LEN;
- COPY_MAC_ADDR(CalcMicBuffer + CalcMicBufferLen, pAd->MlmeAux.Bssid);
- CalcMicBufferLen += MAC_ADDR_LEN;
- NdisMoveMemory(CalcMicBuffer + CalcMicBufferLen, CipherSuiteCiscoCCKM, CipherSuiteCiscoCCKMLen);
- CalcMicBufferLen += CipherSuiteCiscoCCKMLen;
- NdisMoveMemory(CalcMicBuffer + CalcMicBufferLen, (PUCHAR) &pAd->StaCfg.CCKMBeaconAtJoinTimeStamp, sizeof(pAd->StaCfg.CCKMBeaconAtJoinTimeStamp));
- CalcMicBufferLen += sizeof(pAd->StaCfg.CCKMBeaconAtJoinTimeStamp);
- NdisMoveMemory(CalcMicBuffer + CalcMicBufferLen, (PUCHAR)&pAd->StaCfg.CCKMRN, sizeof(pAd->StaCfg.CCKMRN));
- CalcMicBufferLen += sizeof(pAd->StaCfg.CCKMRN);
- hmac_md5(pAd->StaCfg.KRK, LEN_EAP_MICK, CalcMicBuffer, CalcMicBufferLen, MICMN);
-
- //
- // fill up CCKM reassociation request element
- //
- NdisMoveMemory(AironetCCKMReassocBuffer, AironetOUI, 4);
- NdisMoveMemory(AironetCCKMReassocBuffer + 4, (PUCHAR)&pAd->StaCfg.CCKMBeaconAtJoinTimeStamp, 8);
- NdisMoveMemory(AironetCCKMReassocBuffer + 12, (PUCHAR) &pAd->StaCfg.CCKMRN, 4);
- NdisMoveMemory(AironetCCKMReassocBuffer +16, MICMN, 8);
-
- MakeOutgoingFrame(pOutBuffer + FrameLen, &tmp,
- 1, &AironetCCKMReassocIE,
- 1, &AironetCCKMReassocLen,
- AironetCCKMReassocLen, AironetCCKMReassocBuffer,
- END_OF_ARGS);
- FrameLen += tmp;
-
- MakeOutgoingFrame(pOutBuffer + FrameLen, &tmp,
- CipherSuiteCiscoCCKMLen,CipherSuiteCiscoCCKM,
- END_OF_ARGS);
- FrameLen += tmp;
- }
-#endif // LEAP_SUPPORT //
// Add CCX v2 request if CCX2 admin state is on
if (pAd->StaCfg.CCXControl.field.Enable == 1)
@@ -1090,14 +978,6 @@ VOID PeerAssocRspAction(
}
else
{
- // Faile on Association, we need to check the status code
- // Is that a Rogue AP?
-#ifdef LEAP_SUPPORT
- if ((pAd->StaCfg.LeapAuthMode == CISCO_AuthModeLEAP) && (Status == MLME_ALG_NOT_SUPPORT))
- { //Possibly Rogue AP
- RogueApTableSetEntry(pAd, &pAd->StaCfg.RogueApTab, pAd->MlmeAux.Bssid, LEAP_REASON_INVALID_AUTH);
- }
-#endif // LEAP_SUPPORT //
}
pAd->Mlme.AssocMachine.CurrState = ASSOC_IDLE;
MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_ASSOC_CONF, 2, &Status);
@@ -1181,37 +1061,6 @@ VOID PeerReassocRspAction(
}
- //
- // Cisco Leap CCKM supported Re-association.
- //
-#ifdef LEAP_SUPPORT
- if (LEAP_CCKM_ON(pAd) && (pAd->StaCfg.CCKMLinkUpFlag == TRUE))
- {
- if (CCKMAssocRspSanity(pAd, Elem->Msg, Elem->MsgLen) == TRUE)
- {
- pAd->StaCfg.CkipFlag = CkipFlag;
- if (CkipFlag & 0x18)
- {
- NdisZeroMemory(pAd->StaCfg.TxSEQ, 4);
- NdisZeroMemory(pAd->StaCfg.RxSEQ, 4);
- NdisZeroMemory(pAd->StaCfg.CKIPMIC, 4);
- pAd->StaCfg.GIV[0] = RandomByte(pAd);
- pAd->StaCfg.GIV[1] = RandomByte(pAd);
- pAd->StaCfg.GIV[2] = RandomByte(pAd);
- pAd->StaCfg.bCkipOn = TRUE;
- DBGPRINT(RT_DEBUG_TRACE, ("<CCX> pAd->StaCfg.CkipFlag = 0x%02x\n", pAd->StaCfg.CkipFlag));
- }
-
- pAd->Mlme.AssocMachine.CurrState = ASSOC_IDLE;
- MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_REASSOC_CONF, 2, &Status);
- }
- else
- {
- DBGPRINT(RT_DEBUG_TRACE, ("ASSOC - CCKMAssocRspSanity() sanity check fail\n"));
- }
- }
- else
-#endif // LEAP_SUPPORT //
{
// CkipFlag is no use for reassociate
pAd->Mlme.AssocMachine.CurrState = ASSOC_IDLE;
@@ -1395,21 +1244,6 @@ VOID PeerDisassocAction(
RTMPSendWirelessEvent(pAd, IW_DISASSOC_EVENT_FLAG, pAd->MacTab.Content[BSSID_WCID].Addr, BSS0, 0);
}
-
-#ifdef LEAP_SUPPORT
- if (pAd->StaCfg.LeapAuthMode == CISCO_AuthModeLEAP)
- {
- // Cisco_LEAP has start a timer
- // We should cancel it if using LEAP
- RTMPCancelTimer(&pAd->StaCfg.LeapAuthTimer, &TimerCancelled);
- //Check is it mach the LEAP Authentication failed as possible a Rogue AP
- //on it's PortSecured not equal to WPA_802_1X_PORT_SECURED while process the Association.
- if ((pAd->Mlme.LeapMachine.CurrState != LEAP_IDLE) && (pAd->StaCfg.PortSecured != WPA_802_1X_PORT_SECURED))
- {
- RogueApTableSetEntry(pAd, &pAd->StaCfg.RogueApTab, Addr2, LEAP_REASON_AUTH_TIMEOUT);
- }
- }
-#endif // LEAP_SUPPORT //
//
// Get Current System time and Turn on AdjacentAPReport
//
diff --git a/drivers/staging/rt3070/sta/auth.c b/drivers/staging/rt3070/sta/auth.c
index 032b5df..cebd4e7 100644
--- a/drivers/staging/rt3070/sta/auth.c
+++ b/drivers/staging/rt3070/sta/auth.c
@@ -218,15 +218,9 @@ VOID PeerAuthRspAtSeq2Action(
{
// Authentication Mode "LEAP" has allow for CCX 1.X
if ((pAd->MlmeAux.Alg == Ndis802_11AuthModeOpen)
-#ifdef LEAP_SUPPORT
- || (pAd->StaCfg.LeapAuthMode == CISCO_AuthModeLEAP)
-#endif // LEAP_SUPPORT //
)
{
pAd->Mlme.AuthMachine.CurrState = AUTH_REQ_IDLE;
-#ifdef LEAP_SUPPORT
- pAd->Mlme.LeapMachine.CurrState = LEAP_IDLE;
-#endif // LEAP_SUPPORT //
MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_AUTH_CONF, 2, &Status);
}
else
@@ -282,14 +276,6 @@ VOID PeerAuthRspAtSeq2Action(
}
else
{
-#ifdef LEAP_SUPPORT
- if (pAd->StaCfg.LeapAuthMode == CISCO_AuthModeLEAP)
- {
- //Invalid Authentication possible rogue AP
- //Add this Ap to Rogue AP.
- RogueApTableSetEntry(pAd, &pAd->StaCfg.RogueApTab, Addr2, LEAP_REASON_INVALID_AUTH);
- }
-#endif // LEAP_SUPPORT //
pAd->StaCfg.AuthFailReason = Status;
COPY_MAC_ADDR(pAd->StaCfg.AuthFailSta, Addr2);
pAd->Mlme.AuthMachine.CurrState = AUTH_REQ_IDLE;
diff --git a/drivers/staging/rt3070/sta/auth_rsp.c b/drivers/staging/rt3070/sta/auth_rsp.c
index f7aa4b9..2038dde 100644
--- a/drivers/staging/rt3070/sta/auth_rsp.c
+++ b/drivers/staging/rt3070/sta/auth_rsp.c
@@ -142,21 +142,6 @@ VOID PeerDeauthAction(
RTMPSendWirelessEvent(pAd, IW_DEAUTH_EVENT_FLAG, pAd->MacTab.Content[BSSID_WCID].Addr, BSS0, 0);
LinkDown(pAd, TRUE);
-
- // Authentication Mode Cisco_LEAP has start a timer
- // We should cancel it if using LEAP
-#ifdef LEAP_SUPPORT
- if (pAd->StaCfg.LeapAuthMode == CISCO_AuthModeLEAP)
- {
- RTMPCancelTimer(&pAd->StaCfg.LeapAuthTimer, &TimerCancelled);
- //Check is it mach the LEAP Authentication failed as possible a Rogue AP
- //on it's PortSecured not equal to WPA_802_1X_PORT_SECURED while process the Authenticaton.
- if ((pAd->StaCfg.PortSecured != WPA_802_1X_PORT_SECURED) && (pAd->Mlme.LeapMachine.CurrState != LEAP_IDLE))
- {
- RogueApTableSetEntry(pAd, &pAd->StaCfg.RogueApTab, Addr2, LEAP_REASON_AUTH_TIMEOUT);
- }
- }
-#endif // LEAP_SUPPORT //
}
}
else
diff --git a/drivers/staging/rt3070/sta/connect.c b/drivers/staging/rt3070/sta/connect.c
index 222e8a4..ff5896c 100644
--- a/drivers/staging/rt3070/sta/connect.c
+++ b/drivers/staging/rt3070/sta/connect.c
@@ -385,9 +385,6 @@ VOID CntlOidSsidProc(
(pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK) ||
(pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2) ||
(pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK)
-#ifdef LEAP_SUPPORT
- || (pAd->StaCfg.LeapAuthMode == CISCO_AuthModeLEAP)
-#endif // LEAP_SUPPORT //
) &&
(pAd->StaCfg.PortSecured == WPA_802_1X_PORT_NOT_SECURED))
{
@@ -772,14 +769,6 @@ VOID CntlWaitJoinProc(
// 2. joined a new INFRA network, start from authentication
else
{
-#ifdef LEAP_SUPPORT
- // Add AuthMode "LEAP" for CCX 1.X
- if (pAd->StaCfg.LeapAuthMode == CISCO_AuthModeLEAP)
- {
- AuthParmFill(pAd, &AuthReq, pAd->MlmeAux.Bssid, CISCO_AuthModeLEAP);
- }
- else
-#endif // LEAP_SUPPORT //
{
// either Ndis802_11AuthModeShared or Ndis802_11AuthModeAutoSwitch, try shared key first
if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeShared) ||
@@ -915,21 +904,6 @@ VOID CntlWaitAuthProc(
AssocParmFill(pAd, &AssocReq, pAd->MlmeAux.Bssid, pAd->MlmeAux.CapabilityInfo,
ASSOC_TIMEOUT, pAd->StaCfg.DefaultListenCount);
-#ifdef LEAP_SUPPORT
- //
- // Cisco Leap CCKM supported Re-association.
- //
- if (LEAP_CCKM_ON(pAd) && (pAd->StaCfg.CCKMLinkUpFlag == TRUE))
- {
- //if CCKM is turn on , that's mean Fast Reauthentication
- //Use CCKM Reassociation instead of normal association for Fast Roaming.
- MlmeEnqueue(pAd, ASSOC_STATE_MACHINE, MT2_MLME_REASSOC_REQ,
- sizeof(MLME_ASSOC_REQ_STRUCT), &AssocReq);
-
- pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_REASSOC;
- }
- else
-#endif // LEAP_SUPPORT //
{
MlmeEnqueue(pAd, ASSOC_STATE_MACHINE, MT2_MLME_ASSOC_REQ,
sizeof(MLME_ASSOC_REQ_STRUCT), &AssocReq);
@@ -943,14 +917,7 @@ VOID CntlWaitAuthProc(
// ageing-out. The previous authentication attempt must have let it remove us.
// so try Authentication again may help. For D-Link DWL-900AP+ compatibility.
DBGPRINT(RT_DEBUG_TRACE, ("CNTL - AUTH FAIL, try again...\n"));
-#ifdef LEAP_SUPPORT
- //Add AuthMode "LEAP" for CCX 1.X
- if (pAd->StaCfg.LeapAuthMode == CISCO_AuthModeLEAP)
- {
- AuthParmFill(pAd, &AuthReq, pAd->MlmeAux.Bssid, CISCO_AuthModeLEAP);
- }
- else
-#endif // LEAP_SUPPORT //
+
{
if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeShared) ||
(pAd->StaCfg.AuthMode == Ndis802_11AuthModeAutoSwitch))
@@ -1002,20 +969,6 @@ VOID CntlWaitAuthProc2(
}
else
{
-#ifdef LEAP_SUPPORT
- // Process LEAP first, since it use different control variable
- // We don't want to affect other poven operation
- if (pAd->StaCfg.LeapAuthMode == CISCO_AuthModeLEAP)
- {
- // LEAP Auth not success, try next BSS
- DBGPRINT(RT_DEBUG_TRACE, ("CNTL - *LEAP* AUTH FAIL, give up; try next BSS\n"));
- DBGPRINT(RT_DEBUG_TRACE, ("Total match BSSID [=%d]\n", pAd->MlmeAux.SsidBssTab.BssNr));
- pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
- pAd->MlmeAux.BssIdx++;
- IterateOnBssTab(pAd);
- }
- else
-#endif // LEAP_SUPPORT //
if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeAutoSwitch) &&
(pAd->MlmeAux.Alg == Ndis802_11AuthModeShared))
{
@@ -1104,14 +1057,6 @@ VOID CntlWaitReassocProc(
if (pAd->CommonCfg.bWirelessEvent)
RTMPSendWirelessEvent(pAd, IW_ASSOC_EVENT_FLAG, pAd->MacTab.Content[BSSID_WCID].Addr, BSS0, 0);
-
-#ifdef LEAP_SUPPORT
- if (LEAP_CCKM_ON(pAd))
- {
- STA_PORT_SECURED(pAd);
- pAd->StaCfg.WpaState = SS_FINISH;
- }
-#endif // LEAP_SUPPORT //
pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
DBGPRINT(RT_DEBUG_TRACE, ("CNTL - Re-assocition successful on BSS #%ld\n", pAd->MlmeAux.RoamIdx));
}
@@ -1629,13 +1574,6 @@ VOID LinkUp(
DBGPRINT(RT_DEBUG_TRACE, ("!!! LINK UP !! (StaActive.bHtEnable =%d, )\n", pAd->StaActive.SupportedPhyInfo.bHtEnable));
#endif // DOT11_N_SUPPORT //
- //
- // Report Adjacent AP report.
- //
-#ifdef LEAP_SUPPORT
- CCXAdjacentAPReport(pAd);
-#endif // LEAP_SUPPORT //
-
if (pAd->CommonCfg.bAggregationCapable)
{
if ((pAd->CommonCfg.bPiggyBackCapable) && (pAd->MlmeAux.APRalinkIe & 0x00000003) == 3)
diff --git a/drivers/staging/rt3070/sta/rtmp_data.c b/drivers/staging/rt3070/sta/rtmp_data.c
index 68add1f..175be81 100644
--- a/drivers/staging/rt3070/sta/rtmp_data.c
+++ b/drivers/staging/rt3070/sta/rtmp_data.c
@@ -986,9 +986,6 @@ NDIS_STATUS STASendPacket(
#ifdef WPA_SUPPLICANT_SUPPORT
|| (pAd->StaCfg.IEEE8021X == TRUE)
#endif // WPA_SUPPLICANT_SUPPORT //
-#ifdef LEAP_SUPPORT
- || (pAd->StaCfg.LeapAuthMode == CISCO_AuthModeLEAP)
-#endif // LEAP_SUPPORT //
)
&& ((pAd->StaCfg.PortSecured == WPA_802_1X_PORT_NOT_SECURED) || (pAd->StaCfg.MicErrCnt >= 2))
&& (RTMP_GET_PACKET_EAPOL(pPacket)== FALSE)
@@ -1349,30 +1346,6 @@ VOID STAFindCipherAlgorithm(
}
else if (Cipher == Ndis802_11Encryption1Enabled)
{
-#ifdef LEAP_SUPPORT
- if (pAd->StaCfg.CkipFlag & 0x10) // Cisco CKIP KP is on
- {
- if (LEAP_CCKM_ON(pAd))
- {
- if (((*pSrcBufVA & 0x01) && (ADHOC_ON(pAd))))
- KeyIdx = 1;
- else
- KeyIdx = 0;
- }
- else
- KeyIdx = pAd->StaCfg.DefaultKeyId;
- }
- else if (pAd->StaCfg.CkipFlag & 0x08) // only CKIP CMIC
- KeyIdx = pAd->StaCfg.DefaultKeyId;
- else if (LEAP_CCKM_ON(pAd))
- {
- if ((*pSrcBufVA & 0x01) && (ADHOC_ON(pAd)))
- KeyIdx = 1;
- else
- KeyIdx = 0;
- }
- else // standard WEP64 or WEP128
-#endif // LEAP_SUPPORT //
KeyIdx = pAd->StaCfg.DefaultKeyId;
}
else if ((Cipher == Ndis802_11Encryption2Enabled) ||
diff --git a/drivers/staging/rt3070/sta/sync.c b/drivers/staging/rt3070/sta/sync.c
index 7697d5c..f611cc4 100644
--- a/drivers/staging/rt3070/sta/sync.c
+++ b/drivers/staging/rt3070/sta/sync.c
@@ -888,15 +888,6 @@ VOID PeerBeaconAtJoinAction(
DBGPRINT(RT_DEBUG_TRACE, ("SYNC - after JOIN, SupRateLen=%d, ExtRateLen=%d\n",
pAd->MlmeAux.SupRateLen, pAd->MlmeAux.ExtRateLen));
-#ifdef LEAP_SUPPORT
- // Update CkipFlag
- pAd->StaCfg.CkipFlag = CkipFlag;
-
- // Keep TimeStamp for Re-Association used.
- if (LEAP_CCKM_ON(pAd) && (pAd->StaCfg.CCKMLinkUpFlag == TRUE))
- pAd->StaCfg.CCKMBeaconAtJoinTimeStamp = TimeStamp;
-#endif // LEAP_SUPPORT //
-
if (AironetCellPowerLimit != 0xFF)
{
//We need to change our TxPower for CCX 2.0 AP Control of Client Transmit Power
--
1.6.3.2
More information about the devel
mailing list