[PATCH 217/342] Staging: rt3070: remove dead SINGLE_SKU code

[Greg Kroah-Hartman]

From: Bartlomiej Zolnierkiewicz <bzolnier at gmail.com>

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier at gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh at suse.de>
---
 drivers/staging/rt3070/common/mlme.c      |   89 -----------------------------
 drivers/staging/rt3070/common/rtmp_init.c |    4 -
 drivers/staging/rt3070/rtmp.h             |    6 --
 3 files changed, 0 insertions(+), 99 deletions(-)

diff --git a/drivers/staging/rt3070/common/mlme.c b/drivers/staging/rt3070/common/mlme.c
index 3367d53..6251cf0 100644
--- a/drivers/staging/rt3070/common/mlme.c
+++ b/drivers/staging/rt3070/common/mlme.c
@@ -6541,95 +6541,6 @@ VOID AsicAdjustTxPower(
 	RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R1, &BbpR1);
 	BbpR1 &= 0xFC;
 
-#ifdef SINGLE_SKU
-	// Handle regulatory max tx power constrain
-	do
-	{
-		UCHAR    TxPwrInEEPROM = 0xFF, CountryTxPwr = 0xFF, criterion;
-		UCHAR    AdjustMaxTxPwr[40];
-
-		if (pAd->CommonCfg.Channel > 14) // 5G band
-			TxPwrInEEPROM = ((pAd->CommonCfg.DefineMaxTxPwr & 0xFF00) >> 8);
-		else // 2.4G band
-			TxPwrInEEPROM = (pAd->CommonCfg.DefineMaxTxPwr & 0x00FF);
-		CountryTxPwr = GetCuntryMaxTxPwr(pAd, pAd->CommonCfg.Channel);
-
-		// error handling, range check
-		if ((TxPwrInEEPROM > 0x50) || (CountryTxPwr > 0x50))
-		{
-			DBGPRINT(RT_DEBUG_ERROR,("AsicAdjustTxPower - Invalid max tx power (=0x%02x), CountryTxPwr=%d\n", TxPwrInEEPROM, CountryTxPwr));
-			break;
-		}
-
-		criterion = *((PUCHAR)TxPwr + 2) & 0xF;        // FAE use OFDM 6M as criterion
-
-		DBGPRINT_RAW(RT_DEBUG_TRACE,("AsicAdjustTxPower (criterion=%d, TxPwrInEEPROM=%d, CountryTxPwr=%d)\n", criterion, TxPwrInEEPROM, CountryTxPwr));
-
-		// Adjust max tx power according to the relationship of tx power in E2PROM
-		for (i=0; i<5; i++)
-		{
-			// CCK will have 4dBm larger than OFDM
-			// Therefore, we should separate to parse the tx power field
-			if (i == 0)
-			{
-				for (j=0; j<8; j++)
-				{
-					Value = (CHAR)((TxPwr[i] >> j*4) & 0x0F);
-
-					if (j < 4)
-					{
-						// CCK will have 4dBm larger than OFDM
-						AdjustMaxTxPwr[i*8+j] = TxPwrInEEPROM + (Value - criterion) + 4;
-					}
-					else
-					{
-						AdjustMaxTxPwr[i*8+j] = TxPwrInEEPROM + (Value - criterion);
-					}
-					DBGPRINT_RAW(RT_DEBUG_TRACE,("AsicAdjustTxPower (i/j=%d/%d, Value=%d, %d)\n", i, j, Value, AdjustMaxTxPwr[i*8+j]));
-				}
-			}
-			else
-			{
-				for (j=0; j<8; j++)
-				{
-					Value = (CHAR)((TxPwr[i] >> j*4) & 0x0F);
-
-					AdjustMaxTxPwr[i*8+j] = TxPwrInEEPROM + (Value - criterion);
-					DBGPRINT_RAW(RT_DEBUG_TRACE,("AsicAdjustTxPower (i/j=%d/%d, Value=%d, %d)\n", i, j, Value, AdjustMaxTxPwr[i*8+j]));
-				}
-			}
-		}
-
-		// Adjust tx power according to the relationship
-		for (i=0; i<5; i++)
-		{
-			if (TxPwr[i] != 0xffffffff)
-			{
-				for (j=0; j<8; j++)
-				{
-					Value = (CHAR)((TxPwr[i] >> j*4) & 0x0F);
-
-					// The system tx power is larger than the regulatory, the power should be restrain
-					if (AdjustMaxTxPwr[i*8+j] > CountryTxPwr)
-					{
-						// decrease to zero and don't need to take care BBPR1
-						if ((Value - (AdjustMaxTxPwr[i*8+j] - CountryTxPwr)) > 0)
-							Value -= (AdjustMaxTxPwr[i*8+j] - CountryTxPwr);
-						else
-							Value = 0;
-
-						DBGPRINT_RAW(RT_DEBUG_TRACE,("AsicAdjustTxPower (i/j=%d/%d, Value=%d, %d)\n", i, j, Value, AdjustMaxTxPwr[i*8+j]));
-					}
-					else
-						DBGPRINT_RAW(RT_DEBUG_TRACE,("AsicAdjustTxPower (i/j=%d/%d, Value=%d, %d, no change)\n", i, j, Value, AdjustMaxTxPwr[i*8+j]));
-
-						TxPwr[i] = (TxPwr[i] & ~(0x0000000F << j*4)) | (Value << j*4);
-				}
-			}
-		}
-	} while (FALSE);
-#endif // SINGLE_SKU //
-
 	/* calculate delta power based on the percentage specified from UI */
 	// E2PROM setting is calibrated for maximum TX power (i.e. 100%)
 	// We lower TX power here according to the percentage specified from UI
diff --git a/drivers/staging/rt3070/common/rtmp_init.c b/drivers/staging/rt3070/common/rtmp_init.c
index c05e5a7..d52fc34 100644
--- a/drivers/staging/rt3070/common/rtmp_init.c
+++ b/drivers/staging/rt3070/common/rtmp_init.c
@@ -1766,10 +1766,6 @@ VOID	NICReadEEPROMParameters(
 
 	RTMPReadTxPwrPerRate(pAd);
 
-#ifdef SINGLE_SKU
-	//pAd->CommonCfg.DefineMaxTxPwr = RTMP_EEPROM_READ16(pAd, EEPROM_DEFINE_MAX_TXPWR);
-	RT28xx_EEPROM_READ16(pAd, EEPROM_DEFINE_MAX_TXPWR, pAd->CommonCfg.DefineMaxTxPwr);
-#endif // SINGLE_SKU //
 #ifdef RT30xx
 	if (IS_RT30xx(pAd))
 	{
diff --git a/drivers/staging/rt3070/rtmp.h b/drivers/staging/rt3070/rtmp.h
index face5c3..d754886 100644
--- a/drivers/staging/rt3070/rtmp.h
+++ b/drivers/staging/rt3070/rtmp.h
@@ -1934,12 +1934,6 @@ typedef struct _COMMON_CONFIG {
 #ifdef MCAST_RATE_SPECIFIC
 	HTTRANSMIT_SETTING		MCastPhyMode;
 #endif // MCAST_RATE_SPECIFIC //
-
-#ifdef SINGLE_SKU
-	UINT16					DefineMaxTxPwr;
-#endif // SINGLE_SKU //
-
-
 } COMMON_CONFIG, *PCOMMON_CONFIG;
 
 
-- 
1.6.3.2