[PATCH 166/235] Staging: rt28x0: fix comments in *.h files
Greg Kroah-Hartman
gregkh at suse.de
Fri Dec 11 22:28:28 UTC 2009
From: Bartlomiej Zolnierkiewicz <bzolnier at gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier at gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh at suse.de>
---
drivers/staging/rt2860/ap.h | 6 +-
drivers/staging/rt2860/chip/mac_pci.h | 1 -
drivers/staging/rt2860/chip/mac_usb.h | 140 ++--
drivers/staging/rt2860/chip/rt2860.h | 12 +-
drivers/staging/rt2860/chip/rt2870.h | 6 +-
drivers/staging/rt2860/chip/rt3070.h | 10 +-
drivers/staging/rt2860/chip/rt3090.h | 16 +-
drivers/staging/rt2860/chip/rt30xx.h | 4 +-
drivers/staging/rt2860/chip/rtmp_mac.h | 996 ++++++++++----------
drivers/staging/rt2860/chip/rtmp_phy.h | 80 +-
drivers/staging/rt2860/chlist.h | 10 +-
drivers/staging/rt2860/eeprom.h | 10 +-
drivers/staging/rt2860/mlme.h | 562 ++++++------
drivers/staging/rt2860/oid.h | 380 ++++----
drivers/staging/rt2860/rt_config.h | 4 +-
drivers/staging/rt2860/rt_linux.h | 108 ++--
drivers/staging/rt2860/rtmp.h | 1630 ++++++++++++++++----------------
drivers/staging/rt2860/rtmp_chip.h | 194 ++--
drivers/staging/rt2860/rtmp_ckipmic.h | 2 +-
drivers/staging/rt2860/rtmp_def.h | 792 ++++++++--------
drivers/staging/rt2860/rtmp_dot11.h | 60 +-
drivers/staging/rt2860/rtmp_iface.h | 12 +-
drivers/staging/rt2860/rtmp_mcu.h | 2 +-
drivers/staging/rt2860/rtmp_os.h | 6 +-
drivers/staging/rt2860/rtmp_timer.h | 32 +-
drivers/staging/rt2860/rtmp_type.h | 26 +-
drivers/staging/rt2860/rtusb_io.h | 118 ++--
drivers/staging/rt2860/spectrum.h | 2 +-
drivers/staging/rt2860/spectrum_def.h | 4 +-
drivers/staging/rt2860/wpa.h | 120 ++--
30 files changed, 2672 insertions(+), 2673 deletions(-)
diff --git a/drivers/staging/rt2860/ap.h b/drivers/staging/rt2860/ap.h
index 97da749..c7ff694 100644
--- a/drivers/staging/rt2860/ap.h
+++ b/drivers/staging/rt2860/ap.h
@@ -40,7 +40,7 @@
#ifndef __AP_H__
#define __AP_H__
-// ap_wpa.c
+/* ap_wpa.c */
VOID WpaStateMachineInit(IN PRTMP_ADAPTER pAd,
IN STATE_MACHINE * Sm, OUT STATE_MACHINE_FUNC Trans[]);
@@ -48,7 +48,7 @@ VOID WpaStateMachineInit(IN PRTMP_ADAPTER pAd,
VOID BeaconUpdateExec(IN PVOID SystemSpecific1,
IN PVOID FunctionContext,
IN PVOID SystemSpecific2, IN PVOID SystemSpecific3);
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
VOID RTMPSetPiggyBack(IN PRTMP_ADAPTER pAd, IN BOOLEAN bPiggyBack);
@@ -63,4 +63,4 @@ BOOLEAN MacTableDeleteEntry(IN PRTMP_ADAPTER pAd,
MAC_TABLE_ENTRY *MacTableLookup(IN PRTMP_ADAPTER pAd, IN PUCHAR pAddr);
-#endif // __AP_H__
+#endif /* __AP_H__ */
diff --git a/drivers/staging/rt2860/chip/mac_pci.h b/drivers/staging/rt2860/chip/mac_pci.h
index b0aa0d3..34f7b9a 100644
--- a/drivers/staging/rt2860/chip/mac_pci.h
+++ b/drivers/staging/rt2860/chip/mac_pci.h
@@ -178,7 +178,6 @@ typedef union _TX_ATTENUATION_CTRL_STRUC {
#define NEED_QUEUE_BACK_FOR_AGG(pAd, QueIdx, freeNum, _TxFrameType) \
(((freeNum != (TX_RING_SIZE-1)) && (pAd->TxSwQueue[QueIdx].Number == 0)) || (freeNum<3))
- //(((freeNum) != (TX_RING_SIZE-1)) && (pAd->TxSwQueue[QueIdx].Number == 1 /*0*/))
#define HAL_KickOutMgmtTx(_pAd, _QueIdx, _pPacket, _pSrcBufVA, _SrcBufLen) \
RtmpPCIMgmtKickOut(_pAd, _QueIdx, _pPacket, _pSrcBufVA, _SrcBufLen)
diff --git a/drivers/staging/rt2860/chip/mac_usb.h b/drivers/staging/rt2860/chip/mac_usb.h
index 8ce6969..fe7ba28 100644
--- a/drivers/staging/rt2860/chip/mac_usb.h
+++ b/drivers/staging/rt2860/chip/mac_usb.h
@@ -46,18 +46,18 @@
#define USB_CYC_CFG 0x02a4
#define BEACON_RING_SIZE 2
-#define MGMTPIPEIDX 0 // EP6 is highest priority
+#define MGMTPIPEIDX 0 /* EP6 is highest priority */
-#define RTMP_PKT_TAIL_PADDING 11 // 3(max 4 byte padding) + 4 (last packet padding) + 4 (MaxBulkOutsize align padding)
+#define RTMP_PKT_TAIL_PADDING 11 /* 3(max 4 byte padding) + 4 (last packet padding) + 4 (MaxBulkOutsize align padding) */
#define fRTMP_ADAPTER_NEED_STOP_TX \
(fRTMP_ADAPTER_NIC_NOT_EXIST | fRTMP_ADAPTER_HALT_IN_PROGRESS | \
fRTMP_ADAPTER_RESET_IN_PROGRESS | fRTMP_ADAPTER_BULKOUT_RESET | \
fRTMP_ADAPTER_RADIO_OFF | fRTMP_ADAPTER_REMOVE_IN_PROGRESS)
-//
-// RXINFO appends at the end of each rx packet.
-//
+/* */
+/* RXINFO appends at the end of each rx packet. */
+/* */
#define RXINFO_SIZE 4
#define RT2870_RXDMALEN_FIELD_SIZE 4
@@ -66,17 +66,17 @@ typedef struct PACKED _RXINFO_STRUC {
UINT32 DATA:1;
UINT32 NULLDATA:1;
UINT32 FRAG:1;
- UINT32 U2M:1; // 1: this RX frame is unicast to me
- UINT32 Mcast:1; // 1: this is a multicast frame
- UINT32 Bcast:1; // 1: this is a broadcast frame
- UINT32 MyBss:1; // 1: this frame belongs to the same BSSID
- UINT32 Crc:1; // 1: CRC error
- UINT32 CipherErr:2; // 0: decryption okay, 1:ICV error, 2:MIC error, 3:KEY not valid
- UINT32 AMSDU:1; // rx with 802.3 header, not 802.11 header.
+ UINT32 U2M:1; /* 1: this RX frame is unicast to me */
+ UINT32 Mcast:1; /* 1: this is a multicast frame */
+ UINT32 Bcast:1; /* 1: this is a broadcast frame */
+ UINT32 MyBss:1; /* 1: this frame belongs to the same BSSID */
+ UINT32 Crc:1; /* 1: CRC error */
+ UINT32 CipherErr:2; /* 0: decryption okay, 1:ICV error, 2:MIC error, 3:KEY not valid */
+ UINT32 AMSDU:1; /* rx with 802.3 header, not 802.11 header. */
UINT32 HTC:1;
UINT32 RSSI:1;
UINT32 L2PAD:1;
- UINT32 AMPDU:1; // To be moved
+ UINT32 AMPDU:1; /* To be moved */
UINT32 Decrypted:1;
UINT32 PlcpRssil:1;
UINT32 CipherAlg:1;
@@ -84,35 +84,35 @@ typedef struct PACKED _RXINFO_STRUC {
UINT32 PlcpSignal:12;
} RXINFO_STRUC, *PRXINFO_STRUC, RT28XX_RXD_STRUC, *PRT28XX_RXD_STRUC;
-//
-// TXINFO
-//
+/* */
+/* TXINFO */
+/* */
#define TXINFO_SIZE 4
typedef struct _TXINFO_STRUC {
- // Word 0
- UINT32 USBDMATxPktLen:16; //used ONLY in USB bulk Aggregation, Total byte counts of all sub-frame.
+ /* Word 0 */
+ UINT32 USBDMATxPktLen:16; /*used ONLY in USB bulk Aggregation, Total byte counts of all sub-frame. */
UINT32 rsv:8;
- UINT32 WIV:1; // Wireless Info Valid. 1 if Driver already fill WI, o if DMA needs to copy WI to correctposition
- UINT32 QSEL:2; // select on-chip FIFO ID for 2nd-stage output scheduler.0:MGMT, 1:HCCA 2:EDCA
- UINT32 SwUseLastRound:1; // Software use.
- UINT32 rsv2:2; // Software use.
- UINT32 USBDMANextVLD:1; //used ONLY in USB bulk Aggregation, NextValid
- UINT32 USBDMATxburst:1; //used ONLY in USB bulk Aggre. Force USB DMA transmit frame from current selected endpoint
+ UINT32 WIV:1; /* Wireless Info Valid. 1 if Driver already fill WI, o if DMA needs to copy WI to correctposition */
+ UINT32 QSEL:2; /* select on-chip FIFO ID for 2nd-stage output scheduler.0:MGMT, 1:HCCA 2:EDCA */
+ UINT32 SwUseLastRound:1; /* Software use. */
+ UINT32 rsv2:2; /* Software use. */
+ UINT32 USBDMANextVLD:1; /*used ONLY in USB bulk Aggregation, NextValid */
+ UINT32 USBDMATxburst:1; /*used ONLY in USB bulk Aggre. Force USB DMA transmit frame from current selected endpoint */
} TXINFO_STRUC, *PTXINFO_STRUC;
-//
-// Management ring buffer format
-//
+/* */
+/* Management ring buffer format */
+/* */
typedef struct _MGMT_STRUC {
BOOLEAN Valid;
PUCHAR pBuffer;
ULONG Length;
} MGMT_STRUC, *PMGMT_STRUC;
-////////////////////////////////////////////////////////////////////////////
-// The TX_BUFFER structure forms the transmitted USB packet to the device
-////////////////////////////////////////////////////////////////////////////
+/*////////////////////////////////////////////////////////////////////////// */
+/* The TX_BUFFER structure forms the transmitted USB packet to the device */
+/*////////////////////////////////////////////////////////////////////////// */
typedef struct __TX_BUFFER {
union {
UCHAR WirelessPacket[TX_BUFFER_NORMSIZE];
@@ -120,7 +120,7 @@ typedef struct __TX_BUFFER {
PSPOLL_FRAME PsPollPacket;
RTS_FRAME RTSFrame;
} field;
- UCHAR Aggregation[4]; //Buffer for save Aggregation size.
+ UCHAR Aggregation[4]; /*Buffer for save Aggregation size. */
} TX_BUFFER, *PTX_BUFFER;
typedef struct __HTTX_BUFFER {
@@ -130,22 +130,22 @@ typedef struct __HTTX_BUFFER {
PSPOLL_FRAME PsPollPacket;
RTS_FRAME RTSFrame;
} field;
- UCHAR Aggregation[4]; //Buffer for save Aggregation size.
+ UCHAR Aggregation[4]; /*Buffer for save Aggregation size. */
} HTTX_BUFFER, *PHTTX_BUFFER;
-// used to track driver-generated write irps
+/* used to track driver-generated write irps */
typedef struct _TX_CONTEXT {
- PVOID pAd; //Initialized in MiniportInitialize
- PURB pUrb; //Initialized in MiniportInitialize
- PIRP pIrp; //used to cancel pending bulk out.
- //Initialized in MiniportInitialize
- PTX_BUFFER TransferBuffer; //Initialized in MiniportInitialize
+ PVOID pAd; /*Initialized in MiniportInitialize */
+ PURB pUrb; /*Initialized in MiniportInitialize */
+ PIRP pIrp; /*used to cancel pending bulk out. */
+ /*Initialized in MiniportInitialize */
+ PTX_BUFFER TransferBuffer; /*Initialized in MiniportInitialize */
ULONG BulkOutSize;
UCHAR BulkOutPipeId;
UCHAR SelfIdx;
BOOLEAN InUse;
- BOOLEAN bWaitingBulkOut; // at least one packet is in this TxContext, ready for making IRP anytime.
- BOOLEAN bFullForBulkOut; // all tx buffer are full , so waiting for tx bulkout.
+ BOOLEAN bWaitingBulkOut; /* at least one packet is in this TxContext, ready for making IRP anytime. */
+ BOOLEAN bFullForBulkOut; /* all tx buffer are full , so waiting for tx bulkout. */
BOOLEAN IRPPending;
BOOLEAN LastOne;
BOOLEAN bAggregatible;
@@ -153,18 +153,18 @@ typedef struct _TX_CONTEXT {
UCHAR Rsv[2];
ULONG DataOffset;
UINT TxRate;
- dma_addr_t data_dma; // urb dma on linux
+ dma_addr_t data_dma; /* urb dma on linux */
} TX_CONTEXT, *PTX_CONTEXT, **PPTX_CONTEXT;
-// used to track driver-generated write irps
+/* used to track driver-generated write irps */
typedef struct _HT_TX_CONTEXT {
- PVOID pAd; //Initialized in MiniportInitialize
- PURB pUrb; //Initialized in MiniportInitialize
- PIRP pIrp; //used to cancel pending bulk out.
- //Initialized in MiniportInitialize
- PHTTX_BUFFER TransferBuffer; //Initialized in MiniportInitialize
- ULONG BulkOutSize; // Indicate the total bulk-out size in bytes in one bulk-transmission
+ PVOID pAd; /*Initialized in MiniportInitialize */
+ PURB pUrb; /*Initialized in MiniportInitialize */
+ PIRP pIrp; /*used to cancel pending bulk out. */
+ /*Initialized in MiniportInitialize */
+ PHTTX_BUFFER TransferBuffer; /*Initialized in MiniportInitialize */
+ ULONG BulkOutSize; /* Indicate the total bulk-out size in bytes in one bulk-transmission */
UCHAR BulkOutPipeId;
BOOLEAN IRPPending;
BOOLEAN LastOne;
@@ -173,33 +173,33 @@ typedef struct _HT_TX_CONTEXT {
BOOLEAN bCopySavePad;
UCHAR SavedPad[8];
UCHAR Header_802_3[LENGTH_802_3];
- ULONG CurWritePosition; // Indicate the buffer offset which packet will be inserted start from.
- ULONG CurWriteRealPos; // Indicate the buffer offset which packet now are writing to.
- ULONG NextBulkOutPosition; // Indicate the buffer start offset of a bulk-transmission
- ULONG ENextBulkOutPosition; // Indicate the buffer end offset of a bulk-transmission
+ ULONG CurWritePosition; /* Indicate the buffer offset which packet will be inserted start from. */
+ ULONG CurWriteRealPos; /* Indicate the buffer offset which packet now are writing to. */
+ ULONG NextBulkOutPosition; /* Indicate the buffer start offset of a bulk-transmission */
+ ULONG ENextBulkOutPosition; /* Indicate the buffer end offset of a bulk-transmission */
UINT TxRate;
- dma_addr_t data_dma; // urb dma on linux
+ dma_addr_t data_dma; /* urb dma on linux */
} HT_TX_CONTEXT, *PHT_TX_CONTEXT, **PPHT_TX_CONTEXT;
-//
-// Structure to keep track of receive packets and buffers to indicate
-// receive data to the protocol.
-//
+/* */
+/* Structure to keep track of receive packets and buffers to indicate */
+/* receive data to the protocol. */
+/* */
typedef struct _RX_CONTEXT {
PUCHAR TransferBuffer;
PVOID pAd;
- PIRP pIrp; //used to cancel pending bulk in.
+ PIRP pIrp; /*used to cancel pending bulk in. */
PURB pUrb;
- //These 2 Boolean shouldn't both be 1 at the same time.
- ULONG BulkInOffset; // number of packets waiting for reordering .
-// BOOLEAN ReorderInUse; // At least one packet in this buffer are in reordering buffer and wait for receive indication
- BOOLEAN bRxHandling; // Notify this packet is being process now.
- BOOLEAN InUse; // USB Hardware Occupied. Wait for USB HW to put packet.
- BOOLEAN Readable; // Receive Complete back. OK for driver to indicate receiving packet.
- BOOLEAN IRPPending; // TODO: To be removed
+ /*These 2 Boolean shouldn't both be 1 at the same time. */
+ ULONG BulkInOffset; /* number of packets waiting for reordering . */
+/* BOOLEAN ReorderInUse; // At least one packet in this buffer are in reordering buffer and wait for receive indication */
+ BOOLEAN bRxHandling; /* Notify this packet is being process now. */
+ BOOLEAN InUse; /* USB Hardware Occupied. Wait for USB HW to put packet. */
+ BOOLEAN Readable; /* Receive Complete back. OK for driver to indicate receiving packet. */
+ BOOLEAN IRPPending; /* TODO: To be removed */
atomic_t IrpLock;
NDIS_SPIN_LOCK RxContextLock;
- dma_addr_t data_dma; // urb dma on linux
+ dma_addr_t data_dma; /* urb dma on linux */
} RX_CONTEXT, *PRX_CONTEXT;
/******************************************************************************
@@ -207,9 +207,9 @@ typedef struct _RX_CONTEXT {
USB Frimware Related MACRO
******************************************************************************/
-// 8051 firmware image for usb - use last-half base address = 0x3000
+/* 8051 firmware image for usb - use last-half base address = 0x3000 */
#define FIRMWARE_IMAGE_BASE 0x3000
-#define MAX_FIRMWARE_IMAGE_SIZE 0x1000 // 4kbyte
+#define MAX_FIRMWARE_IMAGE_SIZE 0x1000 /* 4kbyte */
#define RTMP_WRITE_FIRMWARE(_pAd, _pFwImage, _FwLen) \
RTUSBFirmwareWrite(_pAd, _pFwImage, _FwLen)
@@ -278,7 +278,7 @@ typedef struct _RX_CONTEXT {
#define HAL_KickOutNullFrameTx(_pAd, _QueIdx, _pNullFrame, _frameLen) \
RtmpUSBNullFrameKickOut(_pAd, _QueIdx, _pNullFrame, _frameLen)
-#define GET_TXRING_FREENO(_pAd, _QueIdx) (_QueIdx) //(_pAd->TxRing[_QueIdx].TxSwFreeIdx)
+#define GET_TXRING_FREENO(_pAd, _QueIdx) (_QueIdx) /*(_pAd->TxRing[_QueIdx].TxSwFreeIdx) */
#define GET_MGMTRING_FREENO(_pAd) (_pAd->MgmtRing.TxSwFreeIdx)
/* ----------------- RX Related MACRO ----------------- */
@@ -344,4 +344,4 @@ typedef struct _RX_CONTEXT {
#define RTMP_MLME_RADIO_OFF(pAd) \
RT28xxUsbMlmeRadioOFF(pAd);
-#endif //__MAC_USB_H__ //
+#endif /*__MAC_USB_H__ // */
diff --git a/drivers/staging/rt2860/chip/rt2860.h b/drivers/staging/rt2860/chip/rt2860.h
index 6b976b4..f30b808 100644
--- a/drivers/staging/rt2860/chip/rt2860.h
+++ b/drivers/staging/rt2860/chip/rt2860.h
@@ -38,17 +38,17 @@
#error "For RT2880, you should define the compile flag -DRTMP_MAC_PCI"
#endif
-//
-// Device ID & Vendor ID, these values should match EEPROM value
-//
+/* */
+/* Device ID & Vendor ID, these values should match EEPROM value */
+/* */
#define NIC2860_PCI_DEVICE_ID 0x0601
#define NIC2860_PCIe_DEVICE_ID 0x0681
-#define NIC2760_PCI_DEVICE_ID 0x0701 // 1T/2R Cardbus ???
-#define NIC2790_PCIe_DEVICE_ID 0x0781 // 1T/2R miniCard
+#define NIC2760_PCI_DEVICE_ID 0x0701 /* 1T/2R Cardbus ??? */
+#define NIC2790_PCIe_DEVICE_ID 0x0781 /* 1T/2R miniCard */
#define VEN_AWT_PCIe_DEVICE_ID 0x1059
#define VEN_AWT_PCI_VENDOR_ID 0x1A3B
#define EDIMAX_PCI_VENDOR_ID 0x1432
-#endif //__RT2860_H__ //
+#endif /*__RT2860_H__ // */
diff --git a/drivers/staging/rt2860/chip/rt2870.h b/drivers/staging/rt2860/chip/rt2870.h
index 5115a37..8263f1b 100644
--- a/drivers/staging/rt2860/chip/rt2870.h
+++ b/drivers/staging/rt2860/chip/rt2870.h
@@ -40,7 +40,7 @@
#include "../rtmp_type.h"
#include "mac_usb.h"
-//#define RTMP_CHIP_NAME "RT2870"
+/*#define RTMP_CHIP_NAME "RT2870" */
-#endif // RT2870 //
-#endif //__RT2870_H__ //
+#endif /* RT2870 // */
+#endif /*__RT2870_H__ // */
diff --git a/drivers/staging/rt2860/chip/rt3070.h b/drivers/staging/rt2860/chip/rt3070.h
index 3781d9d..172ce70 100644
--- a/drivers/staging/rt2860/chip/rt3070.h
+++ b/drivers/staging/rt2860/chip/rt3070.h
@@ -58,10 +58,10 @@
#include "mac_usb.h"
#include "rt30xx.h"
-//
-// Device ID & Vendor ID, these values should match EEPROM value
-//
+/* */
+/* Device ID & Vendor ID, these values should match EEPROM value */
+/* */
-#endif // RT3070 //
+#endif /* RT3070 // */
-#endif //__RT3070_H__ //
+#endif /*__RT3070_H__ // */
diff --git a/drivers/staging/rt2860/chip/rt3090.h b/drivers/staging/rt2860/chip/rt3090.h
index 92481cc..102b938 100644
--- a/drivers/staging/rt2860/chip/rt3090.h
+++ b/drivers/staging/rt2860/chip/rt3090.h
@@ -60,13 +60,13 @@
#include "mac_pci.h"
#include "rt30xx.h"
-//
-// Device ID & Vendor ID, these values should match EEPROM value
-//
-#define NIC3090_PCIe_DEVICE_ID 0x3090 // 1T/1R miniCard
-#define NIC3091_PCIe_DEVICE_ID 0x3091 // 1T/2R miniCard
-#define NIC3092_PCIe_DEVICE_ID 0x3092 // 2T/2R miniCard
+/* */
+/* Device ID & Vendor ID, these values should match EEPROM value */
+/* */
+#define NIC3090_PCIe_DEVICE_ID 0x3090 /* 1T/1R miniCard */
+#define NIC3091_PCIe_DEVICE_ID 0x3091 /* 1T/2R miniCard */
+#define NIC3092_PCIe_DEVICE_ID 0x3092 /* 2T/2R miniCard */
-#endif // RT3090 //
+#endif /* RT3090 // */
-#endif //__RT3090_H__ //
+#endif /*__RT3090_H__ // */
diff --git a/drivers/staging/rt2860/chip/rt30xx.h b/drivers/staging/rt2860/chip/rt30xx.h
index e6aa175..477a205 100644
--- a/drivers/staging/rt2860/chip/rt30xx.h
+++ b/drivers/staging/rt2860/chip/rt30xx.h
@@ -42,6 +42,6 @@
extern REG_PAIR RT30xx_RFRegTable[];
extern UCHAR NUM_RF_REG_PARMS;
-#endif // RT30xx //
+#endif /* RT30xx // */
-#endif //__RT30XX_H__ //
+#endif /*__RT30XX_H__ // */
diff --git a/drivers/staging/rt2860/chip/rtmp_mac.h b/drivers/staging/rt2860/chip/rtmp_mac.h
index 06321c0..dac1577 100644
--- a/drivers/staging/rt2860/chip/rtmp_mac.h
+++ b/drivers/staging/rt2860/chip/rtmp_mac.h
@@ -38,70 +38,70 @@
#ifndef __RTMP_MAC_H__
#define __RTMP_MAC_H__
-// =================================================================================
-// TX / RX ring descriptor format
-// =================================================================================
+/* ================================================================================= */
+/* TX / RX ring descriptor format */
+/* ================================================================================= */
-// the first 24-byte in TXD is called TXINFO and will be DMAed to MAC block through TXFIFO.
-// MAC block use this TXINFO to control the transmission behavior of this frame.
+/* the first 24-byte in TXD is called TXINFO and will be DMAed to MAC block through TXFIFO. */
+/* MAC block use this TXINFO to control the transmission behavior of this frame. */
#define FIFO_MGMT 0
#define FIFO_HCCA 1
#define FIFO_EDCA 2
-//
-// TXD Wireless Information format for Tx ring and Mgmt Ring
-//
-//txop : for txop mode
-// 0:txop for the MPDU frame will be handles by ASIC by register
-// 1/2/3:the MPDU frame is send after PIFS/backoff/SIFS
+/* */
+/* TXD Wireless Information format for Tx ring and Mgmt Ring */
+/* */
+/*txop : for txop mode */
+/* 0:txop for the MPDU frame will be handles by ASIC by register */
+/* 1/2/3:the MPDU frame is send after PIFS/backoff/SIFS */
typedef struct PACKED _TXWI_STRUC {
- // Word 0
- // ex: 00 03 00 40 means txop = 3, PHYMODE = 1
- UINT32 FRAG:1; // 1 to inform TKIP engine this is a fragment.
- UINT32 MIMOps:1; // the remote peer is in dynamic MIMO-PS mode
+ /* Word 0 */
+ /* ex: 00 03 00 40 means txop = 3, PHYMODE = 1 */
+ UINT32 FRAG:1; /* 1 to inform TKIP engine this is a fragment. */
+ UINT32 MIMOps:1; /* the remote peer is in dynamic MIMO-PS mode */
UINT32 CFACK:1;
UINT32 TS:1;
UINT32 AMPDU:1;
UINT32 MpduDensity:3;
- UINT32 txop:2; //FOR "THIS" frame. 0:HT TXOP rule , 1:PIFS TX ,2:Backoff, 3:sifs only when previous frame exchange is successful.
+ UINT32 txop:2; /*FOR "THIS" frame. 0:HT TXOP rule , 1:PIFS TX ,2:Backoff, 3:sifs only when previous frame exchange is successful. */
UINT32 rsv:6;
UINT32 MCS:7;
- UINT32 BW:1; //channel bandwidth 20MHz or 40 MHz
+ UINT32 BW:1; /*channel bandwidth 20MHz or 40 MHz */
UINT32 ShortGI:1;
- UINT32 STBC:2; // 1: STBC support MCS =0-7, 2,3 : RESERVE
- UINT32 Ifs:1; //
-// UINT32 rsv2:2; //channel bandwidth 20MHz or 40 MHz
+ UINT32 STBC:2; /* 1: STBC support MCS =0-7, 2,3 : RESERVE */
+ UINT32 Ifs:1; /* */
+/* UINT32 rsv2:2; //channel bandwidth 20MHz or 40 MHz */
UINT32 rsv2:1;
- UINT32 TxBF:1; // 3*3
+ UINT32 TxBF:1; /* 3*3 */
UINT32 PHYMODE:2;
- // Word1
- // ex: 1c ff 38 00 means ACK=0, BAWinSize=7, MPDUtotalByteCount = 0x38
+ /* Word1 */
+ /* ex: 1c ff 38 00 means ACK=0, BAWinSize=7, MPDUtotalByteCount = 0x38 */
UINT32 ACK:1;
UINT32 NSEQ:1;
UINT32 BAWinSize:6;
UINT32 WirelessCliID:8;
UINT32 MPDUtotalByteCount:12;
UINT32 PacketId:4;
- //Word2
+ /*Word2 */
UINT32 IV;
- //Word3
+ /*Word3 */
UINT32 EIV;
} TXWI_STRUC, *PTXWI_STRUC;
-//
-// RXWI wireless information format, in PBF. invisible in driver.
-//
+/* */
+/* RXWI wireless information format, in PBF. invisible in driver. */
+/* */
typedef struct PACKED _RXWI_STRUC {
- // Word 0
+ /* Word 0 */
UINT32 WirelessCliID:8;
UINT32 KeyIndex:2;
UINT32 BSSID:3;
UINT32 UDF:3;
UINT32 MPDUtotalByteCount:12;
UINT32 TID:4;
- // Word 1
+ /* Word 1 */
UINT32 FRAG:4;
UINT32 SEQUENCE:12;
UINT32 MCS:7;
@@ -109,29 +109,29 @@ typedef struct PACKED _RXWI_STRUC {
UINT32 ShortGI:1;
UINT32 STBC:2;
UINT32 rsv:3;
- UINT32 PHYMODE:2; // 1: this RX frame is unicast to me
- //Word2
+ UINT32 PHYMODE:2; /* 1: this RX frame is unicast to me */
+ /*Word2 */
UINT32 RSSI0:8;
UINT32 RSSI1:8;
UINT32 RSSI2:8;
UINT32 rsv1:8;
- //Word3
+ /*Word3 */
UINT32 SNR0:8;
UINT32 SNR1:8;
- UINT32 FOFFSET:8; // RT35xx
+ UINT32 FOFFSET:8; /* RT35xx */
UINT32 rsv2:8;
/*UINT32 rsv2:16; */
} RXWI_STRUC, *PRXWI_STRUC;
-// =================================================================================
-// Register format
-// =================================================================================
+/* ================================================================================= */
+/* Register format */
+/* ================================================================================= */
-//
-// SCH/DMA registers - base address 0x0200
-//
-// INT_SOURCE_CSR: Interrupt source register. Write one to clear corresponding bit
-//
+/* */
+/* SCH/DMA registers - base address 0x0200 */
+/* */
+/* INT_SOURCE_CSR: Interrupt source register. Write one to clear corresponding bit */
+/* */
#define DMA_CSR0 0x200
#define INT_SOURCE_CSR 0x200
typedef union _INT_SOURCE_CSR_STRUC {
@@ -139,29 +139,29 @@ typedef union _INT_SOURCE_CSR_STRUC {
UINT32 RxDelayINT:1;
UINT32 TxDelayINT:1;
UINT32 RxDone:1;
- UINT32 Ac0DmaDone:1; //4
+ UINT32 Ac0DmaDone:1; /*4 */
UINT32 Ac1DmaDone:1;
UINT32 Ac2DmaDone:1;
UINT32 Ac3DmaDone:1;
- UINT32 HccaDmaDone:1; // bit7
+ UINT32 HccaDmaDone:1; /* bit7 */
UINT32 MgmtDmaDone:1;
- UINT32 MCUCommandINT:1; //bit 9
+ UINT32 MCUCommandINT:1; /*bit 9 */
UINT32 RxTxCoherent:1;
UINT32 TBTTInt:1;
UINT32 PreTBTT:1;
- UINT32 TXFifoStatusInt:1; //FIFO Statistics is full, sw should read 0x171c
- UINT32 AutoWakeup:1; //bit14
+ UINT32 TXFifoStatusInt:1; /*FIFO Statistics is full, sw should read 0x171c */
+ UINT32 AutoWakeup:1; /*bit14 */
UINT32 GPTimer:1;
- UINT32 RxCoherent:1; //bit16
+ UINT32 RxCoherent:1; /*bit16 */
UINT32 TxCoherent:1;
UINT32:14;
} field;
UINT32 word;
} INT_SOURCE_CSR_STRUC, *PINT_SOURCE_CSR_STRUC;
-//
-// INT_MASK_CSR: Interrupt MASK register. 1: the interrupt is mask OFF
-//
+/* */
+/* INT_MASK_CSR: Interrupt MASK register. 1: the interrupt is mask OFF */
+/* */
#define INT_MASK_CSR 0x204
typedef union _INT_MASK_CSR_STRUC {
struct {
@@ -228,99 +228,99 @@ typedef union _DELAY_INT_CFG_STRUC {
#define WMM_AIFSN_CFG 0x0214
typedef union _AIFSN_CSR_STRUC {
struct {
- UINT32 Aifsn0:4; // for AC_BE
- UINT32 Aifsn1:4; // for AC_BK
- UINT32 Aifsn2:4; // for AC_VI
- UINT32 Aifsn3:4; // for AC_VO
+ UINT32 Aifsn0:4; /* for AC_BE */
+ UINT32 Aifsn1:4; /* for AC_BK */
+ UINT32 Aifsn2:4; /* for AC_VI */
+ UINT32 Aifsn3:4; /* for AC_VO */
UINT32 Rsv:16;
} field;
UINT32 word;
} AIFSN_CSR_STRUC, *PAIFSN_CSR_STRUC;
-//
-// CWMIN_CSR: CWmin for each EDCA AC
-//
+/* */
+/* CWMIN_CSR: CWmin for each EDCA AC */
+/* */
#define WMM_CWMIN_CFG 0x0218
typedef union _CWMIN_CSR_STRUC {
struct {
- UINT32 Cwmin0:4; // for AC_BE
- UINT32 Cwmin1:4; // for AC_BK
- UINT32 Cwmin2:4; // for AC_VI
- UINT32 Cwmin3:4; // for AC_VO
+ UINT32 Cwmin0:4; /* for AC_BE */
+ UINT32 Cwmin1:4; /* for AC_BK */
+ UINT32 Cwmin2:4; /* for AC_VI */
+ UINT32 Cwmin3:4; /* for AC_VO */
UINT32 Rsv:16;
} field;
UINT32 word;
} CWMIN_CSR_STRUC, *PCWMIN_CSR_STRUC;
-//
-// CWMAX_CSR: CWmin for each EDCA AC
-//
+/* */
+/* CWMAX_CSR: CWmin for each EDCA AC */
+/* */
#define WMM_CWMAX_CFG 0x021c
typedef union _CWMAX_CSR_STRUC {
struct {
- UINT32 Cwmax0:4; // for AC_BE
- UINT32 Cwmax1:4; // for AC_BK
- UINT32 Cwmax2:4; // for AC_VI
- UINT32 Cwmax3:4; // for AC_VO
+ UINT32 Cwmax0:4; /* for AC_BE */
+ UINT32 Cwmax1:4; /* for AC_BK */
+ UINT32 Cwmax2:4; /* for AC_VI */
+ UINT32 Cwmax3:4; /* for AC_VO */
UINT32 Rsv:16;
} field;
UINT32 word;
} CWMAX_CSR_STRUC, *PCWMAX_CSR_STRUC;
-//
-// AC_TXOP_CSR0: AC_BK/AC_BE TXOP register
-//
+/* */
+/* AC_TXOP_CSR0: AC_BK/AC_BE TXOP register */
+/* */
#define WMM_TXOP0_CFG 0x0220
typedef union _AC_TXOP_CSR0_STRUC {
struct {
- USHORT Ac0Txop; // for AC_BK, in unit of 32us
- USHORT Ac1Txop; // for AC_BE, in unit of 32us
+ USHORT Ac0Txop; /* for AC_BK, in unit of 32us */
+ USHORT Ac1Txop; /* for AC_BE, in unit of 32us */
} field;
UINT32 word;
} AC_TXOP_CSR0_STRUC, *PAC_TXOP_CSR0_STRUC;
-//
-// AC_TXOP_CSR1: AC_VO/AC_VI TXOP register
-//
+/* */
+/* AC_TXOP_CSR1: AC_VO/AC_VI TXOP register */
+/* */
#define WMM_TXOP1_CFG 0x0224
typedef union _AC_TXOP_CSR1_STRUC {
struct {
- USHORT Ac2Txop; // for AC_VI, in unit of 32us
- USHORT Ac3Txop; // for AC_VO, in unit of 32us
+ USHORT Ac2Txop; /* for AC_VI, in unit of 32us */
+ USHORT Ac3Txop; /* for AC_VO, in unit of 32us */
} field;
UINT32 word;
} AC_TXOP_CSR1_STRUC, *PAC_TXOP_CSR1_STRUC;
#define RINGREG_DIFF 0x10
-#define GPIO_CTRL_CFG 0x0228 //MAC_CSR13
+#define GPIO_CTRL_CFG 0x0228 /*MAC_CSR13 */
#define MCU_CMD_CFG 0x022c
-#define TX_BASE_PTR0 0x0230 //AC_BK base address
+#define TX_BASE_PTR0 0x0230 /*AC_BK base address */
#define TX_MAX_CNT0 0x0234
#define TX_CTX_IDX0 0x0238
#define TX_DTX_IDX0 0x023c
-#define TX_BASE_PTR1 0x0240 //AC_BE base address
+#define TX_BASE_PTR1 0x0240 /*AC_BE base address */
#define TX_MAX_CNT1 0x0244
#define TX_CTX_IDX1 0x0248
#define TX_DTX_IDX1 0x024c
-#define TX_BASE_PTR2 0x0250 //AC_VI base address
+#define TX_BASE_PTR2 0x0250 /*AC_VI base address */
#define TX_MAX_CNT2 0x0254
#define TX_CTX_IDX2 0x0258
#define TX_DTX_IDX2 0x025c
-#define TX_BASE_PTR3 0x0260 //AC_VO base address
+#define TX_BASE_PTR3 0x0260 /*AC_VO base address */
#define TX_MAX_CNT3 0x0264
#define TX_CTX_IDX3 0x0268
#define TX_DTX_IDX3 0x026c
-#define TX_BASE_PTR4 0x0270 //HCCA base address
+#define TX_BASE_PTR4 0x0270 /*HCCA base address */
#define TX_MAX_CNT4 0x0274
#define TX_CTX_IDX4 0x0278
#define TX_DTX_IDX4 0x027c
-#define TX_BASE_PTR5 0x0280 //MGMT base address
+#define TX_BASE_PTR5 0x0280 /*MGMT base address */
#define TX_MAX_CNT5 0x0284
#define TX_CTX_IDX5 0x0288
#define TX_DTX_IDX5 0x028c
#define TX_MGMTMAX_CNT TX_MAX_CNT5
#define TX_MGMTCTX_IDX TX_CTX_IDX5
#define TX_MGMTDTX_IDX TX_DTX_IDX5
-#define RX_BASE_PTR 0x0290 //RX base address
+#define RX_BASE_PTR 0x0290 /*RX base address */
#define RX_MAX_CNT 0x0294
#define RX_CRX_IDX 0x0298
#define RX_DRX_IDX 0x029c
@@ -328,27 +328,27 @@ typedef union _AC_TXOP_CSR1_STRUC {
#define USB_DMA_CFG 0x02a0
typedef union _USB_DMA_CFG_STRUC {
struct {
- UINT32 RxBulkAggTOut:8; //Rx Bulk Aggregation TimeOut in unit of 33ns
- UINT32 RxBulkAggLmt:8; //Rx Bulk Aggregation Limit in unit of 256 bytes
- UINT32 phyclear:1; //phy watch dog enable. write 1
+ UINT32 RxBulkAggTOut:8; /*Rx Bulk Aggregation TimeOut in unit of 33ns */
+ UINT32 RxBulkAggLmt:8; /*Rx Bulk Aggregation Limit in unit of 256 bytes */
+ UINT32 phyclear:1; /*phy watch dog enable. write 1 */
UINT32 rsv:2;
- UINT32 TxClear:1; //Clear USB DMA TX path
- UINT32 TxopHalt:1; //Halt TXOP count down when TX buffer is full.
- UINT32 RxBulkAggEn:1; //Enable Rx Bulk Aggregation
- UINT32 RxBulkEn:1; //Enable USB DMA Rx
- UINT32 TxBulkEn:1; //Enable USB DMA Tx
- UINT32 EpoutValid:6; //OUT endpoint data valid
- UINT32 RxBusy:1; //USB DMA RX FSM busy
- UINT32 TxBusy:1; //USB DMA TX FSM busy
+ UINT32 TxClear:1; /*Clear USB DMA TX path */
+ UINT32 TxopHalt:1; /*Halt TXOP count down when TX buffer is full. */
+ UINT32 RxBulkAggEn:1; /*Enable Rx Bulk Aggregation */
+ UINT32 RxBulkEn:1; /*Enable USB DMA Rx */
+ UINT32 TxBulkEn:1; /*Enable USB DMA Tx */
+ UINT32 EpoutValid:6; /*OUT endpoint data valid */
+ UINT32 RxBusy:1; /*USB DMA RX FSM busy */
+ UINT32 TxBusy:1; /*USB DMA TX FSM busy */
} field;
UINT32 word;
} USB_DMA_CFG_STRUC, *PUSB_DMA_CFG_STRUC;
-//
-// 3 PBF registers
-//
-//
-// Most are for debug. Driver doesn't touch PBF register.
+/* */
+/* 3 PBF registers */
+/* */
+/* */
+/* Most are for debug. Driver doesn't touch PBF register. */
#define PBF_SYS_CTRL 0x0400
#define PBF_CFG 0x0408
#define PBF_MAX_PCNT 0x040C
@@ -361,224 +361,224 @@ typedef union _USB_DMA_CFG_STRUC {
#ifdef RT30xx
#ifdef RTMP_EFUSE_SUPPORT
-// eFuse registers
+/* eFuse registers */
#define EFUSE_CTRL 0x0580
#define EFUSE_DATA0 0x0590
#define EFUSE_DATA1 0x0594
#define EFUSE_DATA2 0x0598
#define EFUSE_DATA3 0x059c
-#endif // RTMP_EFUSE_SUPPORT //
-#endif // RT30xx //
+#endif /* RTMP_EFUSE_SUPPORT // */
+#endif /* RT30xx // */
#define OSC_CTRL 0x5a4
#define PCIE_PHY_TX_ATTENUATION_CTRL 0x05C8
#define LDO_CFG0 0x05d4
#define GPIO_SWITCH 0x05dc
-//
-// 4 MAC registers
-//
-//
-// 4.1 MAC SYSTEM configuration registers (offset:0x1000)
-//
+/* */
+/* 4 MAC registers */
+/* */
+/* */
+/* 4.1 MAC SYSTEM configuration registers (offset:0x1000) */
+/* */
#define MAC_CSR0 0x1000
typedef union _ASIC_VER_ID_STRUC {
struct {
- USHORT ASICRev; // reversion : 0
- USHORT ASICVer; // version : 2860
+ USHORT ASICRev; /* reversion : 0 */
+ USHORT ASICVer; /* version : 2860 */
} field;
UINT32 word;
} ASIC_VER_ID_STRUC, *PASIC_VER_ID_STRUC;
-#define MAC_SYS_CTRL 0x1004 //MAC_CSR1
-#define MAC_ADDR_DW0 0x1008 // MAC ADDR DW0
-#define MAC_ADDR_DW1 0x100c // MAC ADDR DW1
-//
-// MAC_CSR2: STA MAC register 0
-//
+#define MAC_SYS_CTRL 0x1004 /*MAC_CSR1 */
+#define MAC_ADDR_DW0 0x1008 /* MAC ADDR DW0 */
+#define MAC_ADDR_DW1 0x100c /* MAC ADDR DW1 */
+/* */
+/* MAC_CSR2: STA MAC register 0 */
+/* */
typedef union _MAC_DW0_STRUC {
struct {
- UCHAR Byte0; // MAC address byte 0
- UCHAR Byte1; // MAC address byte 1
- UCHAR Byte2; // MAC address byte 2
- UCHAR Byte3; // MAC address byte 3
+ UCHAR Byte0; /* MAC address byte 0 */
+ UCHAR Byte1; /* MAC address byte 1 */
+ UCHAR Byte2; /* MAC address byte 2 */
+ UCHAR Byte3; /* MAC address byte 3 */
} field;
UINT32 word;
} MAC_DW0_STRUC, *PMAC_DW0_STRUC;
-//
-// MAC_CSR3: STA MAC register 1
-//
+/* */
+/* MAC_CSR3: STA MAC register 1 */
+/* */
typedef union _MAC_DW1_STRUC {
struct {
- UCHAR Byte4; // MAC address byte 4
- UCHAR Byte5; // MAC address byte 5
+ UCHAR Byte4; /* MAC address byte 4 */
+ UCHAR Byte5; /* MAC address byte 5 */
UCHAR U2MeMask;
UCHAR Rsvd1;
} field;
UINT32 word;
} MAC_DW1_STRUC, *PMAC_DW1_STRUC;
-#define MAC_BSSID_DW0 0x1010 // MAC BSSID DW0
-#define MAC_BSSID_DW1 0x1014 // MAC BSSID DW1
+#define MAC_BSSID_DW0 0x1010 /* MAC BSSID DW0 */
+#define MAC_BSSID_DW1 0x1014 /* MAC BSSID DW1 */
-//
-// MAC_CSR5: BSSID register 1
-//
+/* */
+/* MAC_CSR5: BSSID register 1 */
+/* */
typedef union _MAC_CSR5_STRUC {
struct {
- UCHAR Byte4; // BSSID byte 4
- UCHAR Byte5; // BSSID byte 5
- USHORT BssIdMask:2; // 0: one BSSID, 10: 4 BSSID, 01: 2 BSSID , 11: 8BSSID
+ UCHAR Byte4; /* BSSID byte 4 */
+ UCHAR Byte5; /* BSSID byte 5 */
+ USHORT BssIdMask:2; /* 0: one BSSID, 10: 4 BSSID, 01: 2 BSSID , 11: 8BSSID */
USHORT MBssBcnNum:3;
USHORT Rsvd:11;
} field;
UINT32 word;
} MAC_CSR5_STRUC, *PMAC_CSR5_STRUC;
-#define MAX_LEN_CFG 0x1018 // rt2860b max 16k bytes. bit12:13 Maximum PSDU length (power factor) 0:2^13, 1:2^14, 2:2^15, 3:2^16
-#define BBP_CSR_CFG 0x101c //
-//
-// BBP_CSR_CFG: BBP serial control register
-//
+#define MAX_LEN_CFG 0x1018 /* rt2860b max 16k bytes. bit12:13 Maximum PSDU length (power factor) 0:2^13, 1:2^14, 2:2^15, 3:2^16 */
+#define BBP_CSR_CFG 0x101c /* */
+/* */
+/* BBP_CSR_CFG: BBP serial control register */
+/* */
typedef union _BBP_CSR_CFG_STRUC {
struct {
- UINT32 Value:8; // Register value to program into BBP
- UINT32 RegNum:8; // Selected BBP register
- UINT32 fRead:1; // 0: Write BBP, 1: Read BBP
- UINT32 Busy:1; // 1: ASIC is busy execute BBP programming.
- UINT32 BBP_PAR_DUR:1; // 0: 4 MAC clock cycles 1: 8 MAC clock cycles
- UINT32 BBP_RW_MODE:1; // 0: use serial mode 1:parallel
+ UINT32 Value:8; /* Register value to program into BBP */
+ UINT32 RegNum:8; /* Selected BBP register */
+ UINT32 fRead:1; /* 0: Write BBP, 1: Read BBP */
+ UINT32 Busy:1; /* 1: ASIC is busy execute BBP programming. */
+ UINT32 BBP_PAR_DUR:1; /* 0: 4 MAC clock cycles 1: 8 MAC clock cycles */
+ UINT32 BBP_RW_MODE:1; /* 0: use serial mode 1:parallel */
UINT32:12;
} field;
UINT32 word;
} BBP_CSR_CFG_STRUC, *PBBP_CSR_CFG_STRUC;
#define RF_CSR_CFG0 0x1020
-//
-// RF_CSR_CFG: RF control register
-//
+/* */
+/* RF_CSR_CFG: RF control register */
+/* */
typedef union _RF_CSR_CFG0_STRUC {
struct {
- UINT32 RegIdAndContent:24; // Register value to program into BBP
- UINT32 bitwidth:5; // Selected BBP register
- UINT32 StandbyMode:1; // 0: high when stand by 1: low when standby
- UINT32 Sel:1; // 0:RF_LE0 activate 1:RF_LE1 activate
- UINT32 Busy:1; // 0: idle 1: 8busy
+ UINT32 RegIdAndContent:24; /* Register value to program into BBP */
+ UINT32 bitwidth:5; /* Selected BBP register */
+ UINT32 StandbyMode:1; /* 0: high when stand by 1: low when standby */
+ UINT32 Sel:1; /* 0:RF_LE0 activate 1:RF_LE1 activate */
+ UINT32 Busy:1; /* 0: idle 1: 8busy */
} field;
UINT32 word;
} RF_CSR_CFG0_STRUC, *PRF_CSR_CFG0_STRUC;
#define RF_CSR_CFG1 0x1024
typedef union _RF_CSR_CFG1_STRUC {
struct {
- UINT32 RegIdAndContent:24; // Register value to program into BBP
- UINT32 RFGap:5; // Gap between BB_CONTROL_RF and RF_LE. 0: 3 system clock cycle (37.5usec) 1: 5 system clock cycle (62.5usec)
- UINT32 rsv:7; // 0: idle 1: 8busy
+ UINT32 RegIdAndContent:24; /* Register value to program into BBP */
+ UINT32 RFGap:5; /* Gap between BB_CONTROL_RF and RF_LE. 0: 3 system clock cycle (37.5usec) 1: 5 system clock cycle (62.5usec) */
+ UINT32 rsv:7; /* 0: idle 1: 8busy */
} field;
UINT32 word;
} RF_CSR_CFG1_STRUC, *PRF_CSR_CFG1_STRUC;
-#define RF_CSR_CFG2 0x1028 //
+#define RF_CSR_CFG2 0x1028 /* */
typedef union _RF_CSR_CFG2_STRUC {
struct {
- UINT32 RegIdAndContent:24; // Register value to program into BBP
- UINT32 rsv:8; // 0: idle 1: 8busy
+ UINT32 RegIdAndContent:24; /* Register value to program into BBP */
+ UINT32 rsv:8; /* 0: idle 1: 8busy */
} field;
UINT32 word;
} RF_CSR_CFG2_STRUC, *PRF_CSR_CFG2_STRUC;
-#define LED_CFG 0x102c // MAC_CSR14
+#define LED_CFG 0x102c /* MAC_CSR14 */
typedef union _LED_CFG_STRUC {
struct {
- UINT32 OnPeriod:8; // blinking on period unit 1ms
- UINT32 OffPeriod:8; // blinking off period unit 1ms
- UINT32 SlowBlinkPeriod:6; // slow blinking period. unit:1ms
+ UINT32 OnPeriod:8; /* blinking on period unit 1ms */
+ UINT32 OffPeriod:8; /* blinking off period unit 1ms */
+ UINT32 SlowBlinkPeriod:6; /* slow blinking period. unit:1ms */
UINT32 rsv:2;
- UINT32 RLedMode:2; // red Led Mode 0: off1: blinking upon TX2: periodic slow blinking3: always on
- UINT32 GLedMode:2; // green Led Mode
- UINT32 YLedMode:2; // yellow Led Mode
- UINT32 LedPolar:1; // Led Polarity. 0: active low1: active high
+ UINT32 RLedMode:2; /* red Led Mode 0: off1: blinking upon TX2: periodic slow blinking3: always on */
+ UINT32 GLedMode:2; /* green Led Mode */
+ UINT32 YLedMode:2; /* yellow Led Mode */
+ UINT32 LedPolar:1; /* Led Polarity. 0: active low1: active high */
UINT32:1;
} field;
UINT32 word;
} LED_CFG_STRUC, *PLED_CFG_STRUC;
-//
-// 4.2 MAC TIMING configuration registers (offset:0x1100)
-//
-#define XIFS_TIME_CFG 0x1100 // MAC_CSR8 MAC_CSR9
+/* */
+/* 4.2 MAC TIMING configuration registers (offset:0x1100) */
+/* */
+#define XIFS_TIME_CFG 0x1100 /* MAC_CSR8 MAC_CSR9 */
typedef union _IFS_SLOT_CFG_STRUC {
struct {
- UINT32 CckmSifsTime:8; // unit 1us. Applied after CCK RX/TX
- UINT32 OfdmSifsTime:8; // unit 1us. Applied after OFDM RX/TX
- UINT32 OfdmXifsTime:4; //OFDM SIFS. unit 1us. Applied after OFDM RX when MAC doesn't reference BBP signal BBRXEND
- UINT32 EIFS:9; // unit 1us
- UINT32 BBRxendEnable:1; // reference RXEND signal to begin XIFS defer
+ UINT32 CckmSifsTime:8; /* unit 1us. Applied after CCK RX/TX */
+ UINT32 OfdmSifsTime:8; /* unit 1us. Applied after OFDM RX/TX */
+ UINT32 OfdmXifsTime:4; /*OFDM SIFS. unit 1us. Applied after OFDM RX when MAC doesn't reference BBP signal BBRXEND */
+ UINT32 EIFS:9; /* unit 1us */
+ UINT32 BBRxendEnable:1; /* reference RXEND signal to begin XIFS defer */
UINT32 rsv:2;
} field;
UINT32 word;
} IFS_SLOT_CFG_STRUC, *PIFS_SLOT_CFG_STRUC;
-#define BKOFF_SLOT_CFG 0x1104 // mac_csr9 last 8 bits
-#define NAV_TIME_CFG 0x1108 // NAV (MAC_CSR15)
-#define CH_TIME_CFG 0x110C // Count as channel busy
-#define PBF_LIFE_TIMER 0x1110 //TX/RX MPDU timestamp timer (free run)Unit: 1us
-#define BCN_TIME_CFG 0x1114 // TXRX_CSR9
+#define BKOFF_SLOT_CFG 0x1104 /* mac_csr9 last 8 bits */
+#define NAV_TIME_CFG 0x1108 /* NAV (MAC_CSR15) */
+#define CH_TIME_CFG 0x110C /* Count as channel busy */
+#define PBF_LIFE_TIMER 0x1110 /*TX/RX MPDU timestamp timer (free run)Unit: 1us */
+#define BCN_TIME_CFG 0x1114 /* TXRX_CSR9 */
#define BCN_OFFSET0 0x042C
#define BCN_OFFSET1 0x0430
-//
-// BCN_TIME_CFG : Synchronization control register
-//
+/* */
+/* BCN_TIME_CFG : Synchronization control register */
+/* */
typedef union _BCN_TIME_CFG_STRUC {
struct {
- UINT32 BeaconInterval:16; // in unit of 1/16 TU
- UINT32 bTsfTicking:1; // Enable TSF auto counting
- UINT32 TsfSyncMode:2; // Enable TSF sync, 00: disable, 01: infra mode, 10: ad-hoc mode
+ UINT32 BeaconInterval:16; /* in unit of 1/16 TU */
+ UINT32 bTsfTicking:1; /* Enable TSF auto counting */
+ UINT32 TsfSyncMode:2; /* Enable TSF sync, 00: disable, 01: infra mode, 10: ad-hoc mode */
UINT32 bTBTTEnable:1;
- UINT32 bBeaconGen:1; // Enable beacon generator
+ UINT32 bBeaconGen:1; /* Enable beacon generator */
UINT32:3;
UINT32 TxTimestampCompensate:8;
} field;
UINT32 word;
} BCN_TIME_CFG_STRUC, *PBCN_TIME_CFG_STRUC;
-#define TBTT_SYNC_CFG 0x1118 // txrx_csr10
-#define TSF_TIMER_DW0 0x111C // Local TSF timer lsb 32 bits. Read-only
-#define TSF_TIMER_DW1 0x1120 // msb 32 bits. Read-only.
-#define TBTT_TIMER 0x1124 // TImer remains till next TBTT. Read-only. TXRX_CSR14
-#define INT_TIMER_CFG 0x1128 //
-#define INT_TIMER_EN 0x112c // GP-timer and pre-tbtt Int enable
-#define CH_IDLE_STA 0x1130 // channel idle time
-#define CH_BUSY_STA 0x1134 // channle busy time
-//
-// 4.2 MAC POWER configuration registers (offset:0x1200)
-//
-#define MAC_STATUS_CFG 0x1200 // old MAC_CSR12
-#define PWR_PIN_CFG 0x1204 // old MAC_CSR12
-#define AUTO_WAKEUP_CFG 0x1208 // old MAC_CSR10
-//
-// AUTO_WAKEUP_CFG: Manual power control / status register
-//
+#define TBTT_SYNC_CFG 0x1118 /* txrx_csr10 */
+#define TSF_TIMER_DW0 0x111C /* Local TSF timer lsb 32 bits. Read-only */
+#define TSF_TIMER_DW1 0x1120 /* msb 32 bits. Read-only. */
+#define TBTT_TIMER 0x1124 /* TImer remains till next TBTT. Read-only. TXRX_CSR14 */
+#define INT_TIMER_CFG 0x1128 /* */
+#define INT_TIMER_EN 0x112c /* GP-timer and pre-tbtt Int enable */
+#define CH_IDLE_STA 0x1130 /* channel idle time */
+#define CH_BUSY_STA 0x1134 /* channle busy time */
+/* */
+/* 4.2 MAC POWER configuration registers (offset:0x1200) */
+/* */
+#define MAC_STATUS_CFG 0x1200 /* old MAC_CSR12 */
+#define PWR_PIN_CFG 0x1204 /* old MAC_CSR12 */
+#define AUTO_WAKEUP_CFG 0x1208 /* old MAC_CSR10 */
+/* */
+/* AUTO_WAKEUP_CFG: Manual power control / status register */
+/* */
typedef union _AUTO_WAKEUP_STRUC {
struct {
UINT32 AutoLeadTime:8;
- UINT32 NumofSleepingTbtt:7; // ForceWake has high privilege than PutToSleep when both set
- UINT32 EnableAutoWakeup:1; // 0:sleep, 1:awake
+ UINT32 NumofSleepingTbtt:7; /* ForceWake has high privilege than PutToSleep when both set */
+ UINT32 EnableAutoWakeup:1; /* 0:sleep, 1:awake */
UINT32:16;
} field;
UINT32 word;
} AUTO_WAKEUP_STRUC, *PAUTO_WAKEUP_STRUC;
-//
-// 4.3 MAC TX configuration registers (offset:0x1300)
-//
+/* */
+/* 4.3 MAC TX configuration registers (offset:0x1300) */
+/* */
-#define EDCA_AC0_CFG 0x1300 //AC_TXOP_CSR0 0x3474
+#define EDCA_AC0_CFG 0x1300 /*AC_TXOP_CSR0 0x3474 */
#define EDCA_AC1_CFG 0x1304
#define EDCA_AC2_CFG 0x1308
#define EDCA_AC3_CFG 0x130c
typedef union _EDCA_AC_CFG_STRUC {
struct {
- UINT32 AcTxop:8; // in unit of 32us
- UINT32 Aifsn:4; // # of slot time
- UINT32 Cwmin:4; //
- UINT32 Cwmax:4; //unit power of 2
- UINT32:12; //
+ UINT32 AcTxop:8; /* in unit of 32us */
+ UINT32 Aifsn:4; /* # of slot time */
+ UINT32 Cwmin:4; /* */
+ UINT32 Cwmax:4; /*unit power of 2 */
+ UINT32:12; /* */
} field;
UINT32 word;
} EDCA_AC_CFG_STRUC, *PEDCA_AC_CFG_STRUC;
@@ -590,7 +590,7 @@ typedef union _EDCA_AC_CFG_STRUC {
#define TX_PWR_CFG_3 0x1320
#define TX_PWR_CFG_4 0x1324
#define TX_PIN_CFG 0x1328
-#define TX_BAND_CFG 0x132c // 0x1 use upper 20MHz. 0 juse lower 20MHz
+#define TX_BAND_CFG 0x132c /* 0x1 use upper 20MHz. 0 juse lower 20MHz */
#define TX_SW_CFG0 0x1330
#define TX_SW_CFG1 0x1334
#define TX_SW_CFG2 0x1338
@@ -601,9 +601,9 @@ typedef union _EDCA_AC_CFG_STRUC {
typedef union _TX_RTS_CFG_STRUC {
struct {
UINT32 AutoRtsRetryLimit:8;
- UINT32 RtsThres:16; // unit:byte
- UINT32 RtsFbkEn:1; // enable rts rate fallback
- UINT32 rsv:7; // 1: HT non-STBC control frame enable
+ UINT32 RtsThres:16; /* unit:byte */
+ UINT32 RtsFbkEn:1; /* enable rts rate fallback */
+ UINT32 rsv:7; /* 1: HT non-STBC control frame enable */
} field;
UINT32 word;
} TX_RTS_CFG_STRUC, *PTX_RTS_CFG_STRUC;
@@ -611,38 +611,38 @@ typedef union _TX_RTS_CFG_STRUC {
typedef union _TX_TIMEOUT_CFG_STRUC {
struct {
UINT32 rsv:4;
- UINT32 MpduLifeTime:4; // expiration time = 2^(9+MPDU LIFE TIME) us
- UINT32 RxAckTimeout:8; // unit:slot. Used for TX precedure
- UINT32 TxopTimeout:8; //TXOP timeout value for TXOP truncation. It is recommended that (SLOT_TIME) > (TX_OP_TIMEOUT) > (RX_ACK_TIMEOUT)
- UINT32 rsv2:8; // 1: HT non-STBC control frame enable
+ UINT32 MpduLifeTime:4; /* expiration time = 2^(9+MPDU LIFE TIME) us */
+ UINT32 RxAckTimeout:8; /* unit:slot. Used for TX precedure */
+ UINT32 TxopTimeout:8; /*TXOP timeout value for TXOP truncation. It is recommended that (SLOT_TIME) > (TX_OP_TIMEOUT) > (RX_ACK_TIMEOUT) */
+ UINT32 rsv2:8; /* 1: HT non-STBC control frame enable */
} field;
UINT32 word;
} TX_TIMEOUT_CFG_STRUC, *PTX_TIMEOUT_CFG_STRUC;
#define TX_RTY_CFG 0x134c
typedef union PACKED _TX_RTY_CFG_STRUC {
struct {
- UINT32 ShortRtyLimit:8; // short retry limit
- UINT32 LongRtyLimit:8; //long retry limit
- UINT32 LongRtyThre:12; // Long retry threshoold
- UINT32 NonAggRtyMode:1; // Non-Aggregate MPDU retry mode. 0:expired by retry limit, 1: expired by mpdu life timer
- UINT32 AggRtyMode:1; // Aggregate MPDU retry mode. 0:expired by retry limit, 1: expired by mpdu life timer
- UINT32 TxautoFBEnable:1; // Tx retry PHY rate auto fallback enable
- UINT32 rsv:1; // 1: HT non-STBC control frame enable
+ UINT32 ShortRtyLimit:8; /* short retry limit */
+ UINT32 LongRtyLimit:8; /*long retry limit */
+ UINT32 LongRtyThre:12; /* Long retry threshoold */
+ UINT32 NonAggRtyMode:1; /* Non-Aggregate MPDU retry mode. 0:expired by retry limit, 1: expired by mpdu life timer */
+ UINT32 AggRtyMode:1; /* Aggregate MPDU retry mode. 0:expired by retry limit, 1: expired by mpdu life timer */
+ UINT32 TxautoFBEnable:1; /* Tx retry PHY rate auto fallback enable */
+ UINT32 rsv:1; /* 1: HT non-STBC control frame enable */
} field;
UINT32 word;
} TX_RTY_CFG_STRUC, *PTX_RTY_CFG_STRUC;
#define TX_LINK_CFG 0x1350
typedef union PACKED _TX_LINK_CFG_STRUC {
struct PACKED {
- UINT32 RemoteMFBLifeTime:8; //remote MFB life time. unit : 32us
- UINT32 MFBEnable:1; // TX apply remote MFB 1:enable
- UINT32 RemoteUMFSEnable:1; // remote unsolicit MFB enable. 0: not apply remote remote unsolicit (MFS=7)
- UINT32 TxMRQEn:1; // MCS request TX enable
- UINT32 TxRDGEn:1; // RDG TX enable
- UINT32 TxCFAckEn:1; // Piggyback CF-ACK enable
- UINT32 rsv:3; //
- UINT32 RemotMFB:8; // remote MCS feedback
- UINT32 RemotMFS:8; //remote MCS feedback sequence number
+ UINT32 RemoteMFBLifeTime:8; /*remote MFB life time. unit : 32us */
+ UINT32 MFBEnable:1; /* TX apply remote MFB 1:enable */
+ UINT32 RemoteUMFSEnable:1; /* remote unsolicit MFB enable. 0: not apply remote remote unsolicit (MFS=7) */
+ UINT32 TxMRQEn:1; /* MCS request TX enable */
+ UINT32 TxRDGEn:1; /* RDG TX enable */
+ UINT32 TxCFAckEn:1; /* Piggyback CF-ACK enable */
+ UINT32 rsv:3; /* */
+ UINT32 RemotMFB:8; /* remote MCS feedback */
+ UINT32 RemotMFS:8; /*remote MCS feedback sequence number */
} field;
UINT32 word;
} TX_LINK_CFG_STRUC, *PTX_LINK_CFG_STRUC;
@@ -677,116 +677,116 @@ typedef union _HT_FBK_CFG1_STRUC {
#define LG_FBK_CFG0 0x135c
typedef union _LG_FBK_CFG0_STRUC {
struct {
- UINT32 OFDMMCS0FBK:4; //initial value is 0
- UINT32 OFDMMCS1FBK:4; //initial value is 0
- UINT32 OFDMMCS2FBK:4; //initial value is 1
- UINT32 OFDMMCS3FBK:4; //initial value is 2
- UINT32 OFDMMCS4FBK:4; //initial value is 3
- UINT32 OFDMMCS5FBK:4; //initial value is 4
- UINT32 OFDMMCS6FBK:4; //initial value is 5
- UINT32 OFDMMCS7FBK:4; //initial value is 6
+ UINT32 OFDMMCS0FBK:4; /*initial value is 0 */
+ UINT32 OFDMMCS1FBK:4; /*initial value is 0 */
+ UINT32 OFDMMCS2FBK:4; /*initial value is 1 */
+ UINT32 OFDMMCS3FBK:4; /*initial value is 2 */
+ UINT32 OFDMMCS4FBK:4; /*initial value is 3 */
+ UINT32 OFDMMCS5FBK:4; /*initial value is 4 */
+ UINT32 OFDMMCS6FBK:4; /*initial value is 5 */
+ UINT32 OFDMMCS7FBK:4; /*initial value is 6 */
} field;
UINT32 word;
} LG_FBK_CFG0_STRUC, *PLG_FBK_CFG0_STRUC;
#define LG_FBK_CFG1 0x1360
typedef union _LG_FBK_CFG1_STRUC {
struct {
- UINT32 CCKMCS0FBK:4; //initial value is 0
- UINT32 CCKMCS1FBK:4; //initial value is 0
- UINT32 CCKMCS2FBK:4; //initial value is 1
- UINT32 CCKMCS3FBK:4; //initial value is 2
+ UINT32 CCKMCS0FBK:4; /*initial value is 0 */
+ UINT32 CCKMCS1FBK:4; /*initial value is 0 */
+ UINT32 CCKMCS2FBK:4; /*initial value is 1 */
+ UINT32 CCKMCS3FBK:4; /*initial value is 2 */
UINT32 rsv:16;
} field;
UINT32 word;
} LG_FBK_CFG1_STRUC, *PLG_FBK_CFG1_STRUC;
-//=======================================================
-//================ Protection Paramater================================
-//=======================================================
-#define CCK_PROT_CFG 0x1364 //CCK Protection
+/*======================================================= */
+/*================ Protection Paramater================================ */
+/*======================================================= */
+#define CCK_PROT_CFG 0x1364 /*CCK Protection */
#define ASIC_SHORTNAV 1
#define ASIC_LONGNAV 2
#define ASIC_RTS 1
#define ASIC_CTS 2
typedef union _PROT_CFG_STRUC {
struct {
- UINT32 ProtectRate:16; //Protection control frame rate for CCK TX(RTS/CTS/CFEnd).
- UINT32 ProtectCtrl:2; //Protection control frame type for CCK TX. 1:RTS/CTS, 2:CTS-to-self, 0:None, 3:rsv
- UINT32 ProtectNav:2; //TXOP protection type for CCK TX. 0:None, 1:ShortNAVprotect, 2:LongNAVProtect, 3:rsv
- UINT32 TxopAllowCck:1; //CCK TXOP allowance.0:disallow.
- UINT32 TxopAllowOfdm:1; //CCK TXOP allowance.0:disallow.
- UINT32 TxopAllowMM20:1; //CCK TXOP allowance. 0:disallow.
- UINT32 TxopAllowMM40:1; //CCK TXOP allowance.0:disallow.
- UINT32 TxopAllowGF20:1; //CCK TXOP allowance.0:disallow.
- UINT32 TxopAllowGF40:1; //CCK TXOP allowance.0:disallow.
- UINT32 RTSThEn:1; //RTS threshold enable on CCK TX
+ UINT32 ProtectRate:16; /*Protection control frame rate for CCK TX(RTS/CTS/CFEnd). */
+ UINT32 ProtectCtrl:2; /*Protection control frame type for CCK TX. 1:RTS/CTS, 2:CTS-to-self, 0:None, 3:rsv */
+ UINT32 ProtectNav:2; /*TXOP protection type for CCK TX. 0:None, 1:ShortNAVprotect, 2:LongNAVProtect, 3:rsv */
+ UINT32 TxopAllowCck:1; /*CCK TXOP allowance.0:disallow. */
+ UINT32 TxopAllowOfdm:1; /*CCK TXOP allowance.0:disallow. */
+ UINT32 TxopAllowMM20:1; /*CCK TXOP allowance. 0:disallow. */
+ UINT32 TxopAllowMM40:1; /*CCK TXOP allowance.0:disallow. */
+ UINT32 TxopAllowGF20:1; /*CCK TXOP allowance.0:disallow. */
+ UINT32 TxopAllowGF40:1; /*CCK TXOP allowance.0:disallow. */
+ UINT32 RTSThEn:1; /*RTS threshold enable on CCK TX */
UINT32 rsv:5;
} field;
UINT32 word;
} PROT_CFG_STRUC, *PPROT_CFG_STRUC;
-#define OFDM_PROT_CFG 0x1368 //OFDM Protection
-#define MM20_PROT_CFG 0x136C //MM20 Protection
-#define MM40_PROT_CFG 0x1370 //MM40 Protection
-#define GF20_PROT_CFG 0x1374 //GF20 Protection
-#define GF40_PROT_CFG 0x1378 //GR40 Protection
-#define EXP_CTS_TIME 0x137C //
-#define EXP_ACK_TIME 0x1380 //
-
-//
-// 4.4 MAC RX configuration registers (offset:0x1400)
-//
-#define RX_FILTR_CFG 0x1400 //TXRX_CSR0
-#define AUTO_RSP_CFG 0x1404 //TXRX_CSR4
-//
-// TXRX_CSR4: Auto-Responder/
-//
+#define OFDM_PROT_CFG 0x1368 /*OFDM Protection */
+#define MM20_PROT_CFG 0x136C /*MM20 Protection */
+#define MM40_PROT_CFG 0x1370 /*MM40 Protection */
+#define GF20_PROT_CFG 0x1374 /*GF20 Protection */
+#define GF40_PROT_CFG 0x1378 /*GR40 Protection */
+#define EXP_CTS_TIME 0x137C /* */
+#define EXP_ACK_TIME 0x1380 /* */
+
+/* */
+/* 4.4 MAC RX configuration registers (offset:0x1400) */
+/* */
+#define RX_FILTR_CFG 0x1400 /*TXRX_CSR0 */
+#define AUTO_RSP_CFG 0x1404 /*TXRX_CSR4 */
+/* */
+/* TXRX_CSR4: Auto-Responder/ */
+/* */
typedef union _AUTO_RSP_CFG_STRUC {
struct {
UINT32 AutoResponderEnable:1;
- UINT32 BACAckPolicyEnable:1; // 0:long, 1:short preamble
- UINT32 CTS40MMode:1; // Response CTS 40MHz duplicate mode
- UINT32 CTS40MRef:1; // Response CTS 40MHz duplicate mode
- UINT32 AutoResponderPreamble:1; // 0:long, 1:short preamble
- UINT32 rsv:1; // Power bit value in conrtrol frame
- UINT32 DualCTSEn:1; // Power bit value in conrtrol frame
- UINT32 AckCtsPsmBit:1; // Power bit value in conrtrol frame
+ UINT32 BACAckPolicyEnable:1; /* 0:long, 1:short preamble */
+ UINT32 CTS40MMode:1; /* Response CTS 40MHz duplicate mode */
+ UINT32 CTS40MRef:1; /* Response CTS 40MHz duplicate mode */
+ UINT32 AutoResponderPreamble:1; /* 0:long, 1:short preamble */
+ UINT32 rsv:1; /* Power bit value in conrtrol frame */
+ UINT32 DualCTSEn:1; /* Power bit value in conrtrol frame */
+ UINT32 AckCtsPsmBit:1; /* Power bit value in conrtrol frame */
UINT32:24;
} field;
UINT32 word;
} AUTO_RSP_CFG_STRUC, *PAUTO_RSP_CFG_STRUC;
-#define LEGACY_BASIC_RATE 0x1408 // TXRX_CSR5 0x3054
+#define LEGACY_BASIC_RATE 0x1408 /* TXRX_CSR5 0x3054 */
#define HT_BASIC_RATE 0x140c
#define HT_CTRL_CFG 0x1410
#define SIFS_COST_CFG 0x1414
-#define RX_PARSER_CFG 0x1418 //Set NAV for all received frames
-
-//
-// 4.5 MAC Security configuration (offset:0x1500)
-//
-#define TX_SEC_CNT0 0x1500 //
-#define RX_SEC_CNT0 0x1504 //
-#define CCMP_FC_MUTE 0x1508 //
-//
-// 4.6 HCCA/PSMP (offset:0x1600)
-//
+#define RX_PARSER_CFG 0x1418 /*Set NAV for all received frames */
+
+/* */
+/* 4.5 MAC Security configuration (offset:0x1500) */
+/* */
+#define TX_SEC_CNT0 0x1500 /* */
+#define RX_SEC_CNT0 0x1504 /* */
+#define CCMP_FC_MUTE 0x1508 /* */
+/* */
+/* 4.6 HCCA/PSMP (offset:0x1600) */
+/* */
#define TXOP_HLDR_ADDR0 0x1600
#define TXOP_HLDR_ADDR1 0x1604
#define TXOP_HLDR_ET 0x1608
#define QOS_CFPOLL_RA_DW0 0x160c
#define QOS_CFPOLL_A1_DW1 0x1610
#define QOS_CFPOLL_QC 0x1614
-//
-// 4.7 MAC Statistis registers (offset:0x1700)
-//
-#define RX_STA_CNT0 0x1700 //
-#define RX_STA_CNT1 0x1704 //
-#define RX_STA_CNT2 0x1708 //
-
-//
-// RX_STA_CNT0_STRUC: RX PLCP error count & RX CRC error count
-//
+/* */
+/* 4.7 MAC Statistis registers (offset:0x1700) */
+/* */
+#define RX_STA_CNT0 0x1700 /* */
+#define RX_STA_CNT1 0x1704 /* */
+#define RX_STA_CNT2 0x1708 /* */
+
+/* */
+/* RX_STA_CNT0_STRUC: RX PLCP error count & RX CRC error count */
+/* */
typedef union _RX_STA_CNT0_STRUC {
struct {
USHORT CrcErr;
@@ -795,9 +795,9 @@ typedef union _RX_STA_CNT0_STRUC {
UINT32 word;
} RX_STA_CNT0_STRUC, *PRX_STA_CNT0_STRUC;
-//
-// RX_STA_CNT1_STRUC: RX False CCA count & RX LONG frame count
-//
+/* */
+/* RX_STA_CNT1_STRUC: RX False CCA count & RX LONG frame count */
+/* */
typedef union _RX_STA_CNT1_STRUC {
struct {
USHORT FalseCca;
@@ -806,9 +806,9 @@ typedef union _RX_STA_CNT1_STRUC {
UINT32 word;
} RX_STA_CNT1_STRUC, *PRX_STA_CNT1_STRUC;
-//
-// RX_STA_CNT2_STRUC:
-//
+/* */
+/* RX_STA_CNT2_STRUC: */
+/* */
typedef union _RX_STA_CNT2_STRUC {
struct {
USHORT RxDupliCount;
@@ -816,10 +816,10 @@ typedef union _RX_STA_CNT2_STRUC {
} field;
UINT32 word;
} RX_STA_CNT2_STRUC, *PRX_STA_CNT2_STRUC;
-#define TX_STA_CNT0 0x170C //
-//
-// STA_CSR3: TX Beacon count
-//
+#define TX_STA_CNT0 0x170C /* */
+/* */
+/* STA_CSR3: TX Beacon count */
+/* */
typedef union _TX_STA_CNT0_STRUC {
struct {
USHORT TxFailCount;
@@ -827,10 +827,10 @@ typedef union _TX_STA_CNT0_STRUC {
} field;
UINT32 word;
} TX_STA_CNT0_STRUC, *PTX_STA_CNT0_STRUC;
-#define TX_STA_CNT1 0x1710 //
-//
-// TX_STA_CNT1: TX tx count
-//
+#define TX_STA_CNT1 0x1710 /* */
+/* */
+/* TX_STA_CNT1: TX tx count */
+/* */
typedef union _TX_STA_CNT1_STRUC {
struct {
USHORT TxSuccess;
@@ -838,10 +838,10 @@ typedef union _TX_STA_CNT1_STRUC {
} field;
UINT32 word;
} TX_STA_CNT1_STRUC, *PTX_STA_CNT1_STRUC;
-#define TX_STA_CNT2 0x1714 //
-//
-// TX_STA_CNT2: TX tx count
-//
+#define TX_STA_CNT2 0x1714 /* */
+/* */
+/* TX_STA_CNT2: TX tx count */
+/* */
typedef union _TX_STA_CNT2_STRUC {
struct {
USHORT TxZeroLenCount;
@@ -849,26 +849,26 @@ typedef union _TX_STA_CNT2_STRUC {
} field;
UINT32 word;
} TX_STA_CNT2_STRUC, *PTX_STA_CNT2_STRUC;
-#define TX_STA_FIFO 0x1718 //
-//
-// TX_STA_FIFO_STRUC: TX Result for specific PID status fifo register
-//
+#define TX_STA_FIFO 0x1718 /* */
+/* */
+/* TX_STA_FIFO_STRUC: TX Result for specific PID status fifo register */
+/* */
typedef union PACKED _TX_STA_FIFO_STRUC {
struct {
- UINT32 bValid:1; // 1:This register contains a valid TX result
+ UINT32 bValid:1; /* 1:This register contains a valid TX result */
UINT32 PidType:4;
- UINT32 TxSuccess:1; // Tx No retry success
- UINT32 TxAggre:1; // Tx Retry Success
- UINT32 TxAckRequired:1; // Tx fail
- UINT32 wcid:8; //wireless client index
-// UINT32 SuccessRate:16; //include MCS, mode ,shortGI, BW settingSame format as TXWI Word 0 Bit 31-16.
- UINT32 SuccessRate:13; //include MCS, mode ,shortGI, BW settingSame format as TXWI Word 0 Bit 31-16.
+ UINT32 TxSuccess:1; /* Tx No retry success */
+ UINT32 TxAggre:1; /* Tx Retry Success */
+ UINT32 TxAckRequired:1; /* Tx fail */
+ UINT32 wcid:8; /*wireless client index */
+/* UINT32 SuccessRate:16; //include MCS, mode ,shortGI, BW settingSame format as TXWI Word 0 Bit 31-16. */
+ UINT32 SuccessRate:13; /*include MCS, mode ,shortGI, BW settingSame format as TXWI Word 0 Bit 31-16. */
UINT32 TxBF:1;
UINT32 Reserve:2;
} field;
UINT32 word;
} TX_STA_FIFO_STRUC, *PTX_STA_FIFO_STRUC;
-// Debug counter
+/* Debug counter */
#define TX_AGG_CNT 0x171c
typedef union _TX_AGG_CNT_STRUC {
struct {
@@ -877,7 +877,7 @@ typedef union _TX_AGG_CNT_STRUC {
} field;
UINT32 word;
} TX_AGG_CNT_STRUC, *PTX_AGG_CNT_STRUC;
-// Debug counter
+/* Debug counter */
#define TX_AGG_CNT0 0x1720
typedef union _TX_AGG_CNT0_STRUC {
struct {
@@ -886,7 +886,7 @@ typedef union _TX_AGG_CNT0_STRUC {
} field;
UINT32 word;
} TX_AGG_CNT0_STRUC, *PTX_AGG_CNT0_STRUC;
-// Debug counter
+/* Debug counter */
#define TX_AGG_CNT1 0x1724
typedef union _TX_AGG_CNT1_STRUC {
struct {
@@ -903,7 +903,7 @@ typedef union _TX_AGG_CNT2_STRUC {
} field;
UINT32 word;
} TX_AGG_CNT2_STRUC, *PTX_AGG_CNT2_STRUC;
-// Debug counter
+/* Debug counter */
#define TX_AGG_CNT3 0x172c
typedef union _TX_AGG_CNT3_STRUC {
struct {
@@ -912,7 +912,7 @@ typedef union _TX_AGG_CNT3_STRUC {
} field;
UINT32 word;
} TX_AGG_CNT3_STRUC, *PTX_AGG_CNT3_STRUC;
-// Debug counter
+/* Debug counter */
#define TX_AGG_CNT4 0x1730
typedef union _TX_AGG_CNT4_STRUC {
struct {
@@ -948,32 +948,32 @@ typedef union _TX_AGG_CNT7_STRUC {
#define MPDU_DENSITY_CNT 0x1740
typedef union _MPDU_DEN_CNT_STRUC {
struct {
- USHORT TXZeroDelCount; //TX zero length delimiter count
- USHORT RXZeroDelCount; //RX zero length delimiter count
+ USHORT TXZeroDelCount; /*TX zero length delimiter count */
+ USHORT RXZeroDelCount; /*RX zero length delimiter count */
} field;
UINT32 word;
} MPDU_DEN_CNT_STRUC, *PMPDU_DEN_CNT_STRUC;
-//
-// TXRX control registers - base address 0x3000
-//
-// rt2860b UNKNOWN reg use R/O Reg Addr 0x77d0 first..
+/* */
+/* TXRX control registers - base address 0x3000 */
+/* */
+/* rt2860b UNKNOWN reg use R/O Reg Addr 0x77d0 first.. */
#define TXRX_CSR1 0x77d0
-//
-// Security key table memory, base address = 0x1000
-//
-#define MAC_WCID_BASE 0x1800 //8-bytes(use only 6-bytes) * 256 entry =
+/* */
+/* Security key table memory, base address = 0x1000 */
+/* */
+#define MAC_WCID_BASE 0x1800 /*8-bytes(use only 6-bytes) * 256 entry = */
#define HW_WCID_ENTRY_SIZE 8
-#define PAIRWISE_KEY_TABLE_BASE 0x4000 // 32-byte * 256-entry = -byte
+#define PAIRWISE_KEY_TABLE_BASE 0x4000 /* 32-byte * 256-entry = -byte */
#define HW_KEY_ENTRY_SIZE 0x20
-#define PAIRWISE_IVEIV_TABLE_BASE 0x6000 // 8-byte * 256-entry = -byte
-#define MAC_IVEIV_TABLE_BASE 0x6000 // 8-byte * 256-entry = -byte
+#define PAIRWISE_IVEIV_TABLE_BASE 0x6000 /* 8-byte * 256-entry = -byte */
+#define MAC_IVEIV_TABLE_BASE 0x6000 /* 8-byte * 256-entry = -byte */
#define HW_IVEIV_ENTRY_SIZE 8
-#define MAC_WCID_ATTRIBUTE_BASE 0x6800 // 4-byte * 256-entry = -byte
+#define MAC_WCID_ATTRIBUTE_BASE 0x6800 /* 4-byte * 256-entry = -byte */
#define HW_WCID_ATTRI_SIZE 4
#define WCID_RESERVED 0x6bfc
-#define SHARED_KEY_TABLE_BASE 0x6c00 // 32-byte * 16-entry = 512-byte
-#define SHARED_KEY_MODE_BASE 0x7000 // 32-byte * 16-entry = 512-byte
+#define SHARED_KEY_TABLE_BASE 0x6c00 /* 32-byte * 16-entry = 512-byte */
+#define SHARED_KEY_MODE_BASE 0x7000 /* 32-byte * 16-entry = 512-byte */
#define HW_SHARED_KEY_MODE_SIZE 4
#define SHAREDKEYTABLE 0
#define PAIRWISEKEYTABLE 1
@@ -999,48 +999,48 @@ typedef union _SHAREDKEY_MODE_STRUC {
} field;
UINT32 word;
} SHAREDKEY_MODE_STRUC, *PSHAREDKEY_MODE_STRUC;
-// 64-entry for pairwise key table
-typedef struct _HW_WCID_ENTRY { // 8-byte per entry
+/* 64-entry for pairwise key table */
+typedef struct _HW_WCID_ENTRY { /* 8-byte per entry */
UCHAR Address[6];
UCHAR Rsv[2];
} HW_WCID_ENTRY, PHW_WCID_ENTRY;
-// =================================================================================
-// WCID format
-// =================================================================================
-//7.1 WCID ENTRY format : 8bytes
+/* ================================================================================= */
+/* WCID format */
+/* ================================================================================= */
+/*7.1 WCID ENTRY format : 8bytes */
typedef struct _WCID_ENTRY_STRUC {
- UCHAR RXBABitmap7; // bit0 for TID8, bit7 for TID 15
- UCHAR RXBABitmap0; // bit0 for TID0, bit7 for TID 7
- UCHAR MAC[6]; // 0 for shared key table. 1 for pairwise key table
+ UCHAR RXBABitmap7; /* bit0 for TID8, bit7 for TID 15 */
+ UCHAR RXBABitmap0; /* bit0 for TID0, bit7 for TID 7 */
+ UCHAR MAC[6]; /* 0 for shared key table. 1 for pairwise key table */
} WCID_ENTRY_STRUC, *PWCID_ENTRY_STRUC;
-//8.1.1 SECURITY KEY format : 8DW
-// 32-byte per entry, total 16-entry for shared key table, 64-entry for pairwise key table
-typedef struct _HW_KEY_ENTRY { // 32-byte per entry
+/*8.1.1 SECURITY KEY format : 8DW */
+/* 32-byte per entry, total 16-entry for shared key table, 64-entry for pairwise key table */
+typedef struct _HW_KEY_ENTRY { /* 32-byte per entry */
UCHAR Key[16];
UCHAR TxMic[8];
UCHAR RxMic[8];
} HW_KEY_ENTRY, *PHW_KEY_ENTRY;
-//8.1.2 IV/EIV format : 2DW
+/*8.1.2 IV/EIV format : 2DW */
-//8.1.3 RX attribute entry format : 1DW
+/*8.1.3 RX attribute entry format : 1DW */
typedef struct _MAC_ATTRIBUTE_STRUC {
- UINT32 KeyTab:1; // 0 for shared key table. 1 for pairwise key table
+ UINT32 KeyTab:1; /* 0 for shared key table. 1 for pairwise key table */
UINT32 PairKeyMode:3;
- UINT32 BSSIDIdx:3; //multipleBSS index for the WCID
+ UINT32 BSSIDIdx:3; /*multipleBSS index for the WCID */
UINT32 RXWIUDF:3;
UINT32 rsv:22;
} MAC_ATTRIBUTE_STRUC, *PMAC_ATTRIBUTE_STRUC;
-// =================================================================================
-// HOST-MCU communication data structure
-// =================================================================================
+/* ================================================================================= */
+/* HOST-MCU communication data structure */
+/* ================================================================================= */
-//
-// H2M_MAILBOX_CSR: Host-to-MCU Mailbox
-//
+/* */
+/* H2M_MAILBOX_CSR: Host-to-MCU Mailbox */
+/* */
typedef union _H2M_MAILBOX_STRUC {
struct {
UINT32 LowByte:8;
@@ -1051,9 +1051,9 @@ typedef union _H2M_MAILBOX_STRUC {
UINT32 word;
} H2M_MAILBOX_STRUC, *PH2M_MAILBOX_STRUC;
-//
-// M2H_CMD_DONE_CSR: MCU-to-Host command complete indication
-//
+/* */
+/* M2H_CMD_DONE_CSR: MCU-to-Host command complete indication */
+/* */
typedef union _M2H_CMD_DONE_STRUC {
struct {
UINT32 CmdToken0;
@@ -1064,42 +1064,42 @@ typedef union _M2H_CMD_DONE_STRUC {
UINT32 word;
} M2H_CMD_DONE_STRUC, *PM2H_CMD_DONE_STRUC;
-//NAV_TIME_CFG :NAV
+/*NAV_TIME_CFG :NAV */
typedef union _NAV_TIME_CFG_STRUC {
struct {
- UCHAR Sifs; // in unit of 1-us
- UCHAR SlotTime; // in unit of 1-us
- USHORT Eifs:9; // in unit of 1-us
- USHORT ZeroSifs:1; // Applied zero SIFS timer after OFDM RX 0: disable
+ UCHAR Sifs; /* in unit of 1-us */
+ UCHAR SlotTime; /* in unit of 1-us */
+ USHORT Eifs:9; /* in unit of 1-us */
+ USHORT ZeroSifs:1; /* Applied zero SIFS timer after OFDM RX 0: disable */
USHORT rsv:6;
} field;
UINT32 word;
} NAV_TIME_CFG_STRUC, *PNAV_TIME_CFG_STRUC;
-//
-// RX_FILTR_CFG: /RX configuration register
-//
+/* */
+/* RX_FILTR_CFG: /RX configuration register */
+/* */
typedef union _RX_FILTR_CFG_STRUC {
struct {
- UINT32 DropCRCErr:1; // Drop CRC error
- UINT32 DropPhyErr:1; // Drop physical error
- UINT32 DropNotToMe:1; // Drop not to me unicast frame
- UINT32 DropNotMyBSSID:1; // Drop fram ToDs bit is true
-
- UINT32 DropVerErr:1; // Drop version error frame
- UINT32 DropMcast:1; // Drop multicast frames
- UINT32 DropBcast:1; // Drop broadcast frames
- UINT32 DropDuplicate:1; // Drop duplicate frame
-
- UINT32 DropCFEndAck:1; // Drop Ps-Poll
- UINT32 DropCFEnd:1; // Drop Ps-Poll
- UINT32 DropAck:1; // Drop Ps-Poll
- UINT32 DropCts:1; // Drop Ps-Poll
-
- UINT32 DropRts:1; // Drop Ps-Poll
- UINT32 DropPsPoll:1; // Drop Ps-Poll
- UINT32 DropBA:1; //
- UINT32 DropBAR:1; //
+ UINT32 DropCRCErr:1; /* Drop CRC error */
+ UINT32 DropPhyErr:1; /* Drop physical error */
+ UINT32 DropNotToMe:1; /* Drop not to me unicast frame */
+ UINT32 DropNotMyBSSID:1; /* Drop fram ToDs bit is true */
+
+ UINT32 DropVerErr:1; /* Drop version error frame */
+ UINT32 DropMcast:1; /* Drop multicast frames */
+ UINT32 DropBcast:1; /* Drop broadcast frames */
+ UINT32 DropDuplicate:1; /* Drop duplicate frame */
+
+ UINT32 DropCFEndAck:1; /* Drop Ps-Poll */
+ UINT32 DropCFEnd:1; /* Drop Ps-Poll */
+ UINT32 DropAck:1; /* Drop Ps-Poll */
+ UINT32 DropCts:1; /* Drop Ps-Poll */
+
+ UINT32 DropRts:1; /* Drop Ps-Poll */
+ UINT32 DropPsPoll:1; /* Drop Ps-Poll */
+ UINT32 DropBA:1; /* */
+ UINT32 DropBAR:1; /* */
UINT32 DropRsvCntlType:1;
UINT32:15;
@@ -1107,23 +1107,23 @@ typedef union _RX_FILTR_CFG_STRUC {
UINT32 word;
} RX_FILTR_CFG_STRUC, *PRX_FILTR_CFG_STRUC;
-//
-// PHY_CSR4: RF serial control register
-//
+/* */
+/* PHY_CSR4: RF serial control register */
+/* */
typedef union _PHY_CSR4_STRUC {
struct {
- UINT32 RFRegValue:24; // Register value (include register id) serial out to RF/IF chip.
- UINT32 NumberOfBits:5; // Number of bits used in RFRegValue (I:20, RFMD:22)
- UINT32 IFSelect:1; // 1: select IF to program, 0: select RF to program
- UINT32 PLL_LD:1; // RF PLL_LD status
- UINT32 Busy:1; // 1: ASIC is busy execute RF programming.
+ UINT32 RFRegValue:24; /* Register value (include register id) serial out to RF/IF chip. */
+ UINT32 NumberOfBits:5; /* Number of bits used in RFRegValue (I:20, RFMD:22) */
+ UINT32 IFSelect:1; /* 1: select IF to program, 0: select RF to program */
+ UINT32 PLL_LD:1; /* RF PLL_LD status */
+ UINT32 Busy:1; /* 1: ASIC is busy execute RF programming. */
} field;
UINT32 word;
} PHY_CSR4_STRUC, *PPHY_CSR4_STRUC;
-//
-// SEC_CSR5: shared key table security mode register
-//
+/* */
+/* SEC_CSR5: shared key table security mode register */
+/* */
typedef union _SEC_CSR5_STRUC {
struct {
UINT32 Bss2Key0CipherAlg:3;
@@ -1146,9 +1146,9 @@ typedef union _SEC_CSR5_STRUC {
UINT32 word;
} SEC_CSR5_STRUC, *PSEC_CSR5_STRUC;
-//
-// HOST_CMD_CSR: For HOST to interrupt embedded processor
-//
+/* */
+/* HOST_CMD_CSR: For HOST to interrupt embedded processor */
+/* */
typedef union _HOST_CMD_CSR_STRUC {
struct {
UINT32 HostCommand:8;
@@ -1157,47 +1157,47 @@ typedef union _HOST_CMD_CSR_STRUC {
UINT32 word;
} HOST_CMD_CSR_STRUC, *PHOST_CMD_CSR_STRUC;
-//
-// AIFSN_CSR: AIFSN for each EDCA AC
-//
+/* */
+/* AIFSN_CSR: AIFSN for each EDCA AC */
+/* */
-//
-// E2PROM_CSR: EEPROM control register
-//
+/* */
+/* E2PROM_CSR: EEPROM control register */
+/* */
typedef union _E2PROM_CSR_STRUC {
struct {
- UINT32 Reload:1; // Reload EEPROM content, write one to reload, self-cleared.
+ UINT32 Reload:1; /* Reload EEPROM content, write one to reload, self-cleared. */
UINT32 EepromSK:1;
UINT32 EepromCS:1;
UINT32 EepromDI:1;
UINT32 EepromDO:1;
- UINT32 Type:1; // 1: 93C46, 0:93C66
- UINT32 LoadStatus:1; // 1:loading, 0:done
+ UINT32 Type:1; /* 1: 93C46, 0:93C66 */
+ UINT32 LoadStatus:1; /* 1:loading, 0:done */
UINT32 Rsvd:25;
} field;
UINT32 word;
} E2PROM_CSR_STRUC, *PE2PROM_CSR_STRUC;
-//
-// QOS_CSR0: TXOP holder address0 register
-//
+/* */
+/* QOS_CSR0: TXOP holder address0 register */
+/* */
typedef union _QOS_CSR0_STRUC {
struct {
- UCHAR Byte0; // MAC address byte 0
- UCHAR Byte1; // MAC address byte 1
- UCHAR Byte2; // MAC address byte 2
- UCHAR Byte3; // MAC address byte 3
+ UCHAR Byte0; /* MAC address byte 0 */
+ UCHAR Byte1; /* MAC address byte 1 */
+ UCHAR Byte2; /* MAC address byte 2 */
+ UCHAR Byte3; /* MAC address byte 3 */
} field;
UINT32 word;
} QOS_CSR0_STRUC, *PQOS_CSR0_STRUC;
-//
-// QOS_CSR1: TXOP holder address1 register
-//
+/* */
+/* QOS_CSR1: TXOP holder address1 register */
+/* */
typedef union _QOS_CSR1_STRUC {
struct {
- UCHAR Byte4; // MAC address byte 4
- UCHAR Byte5; // MAC address byte 5
+ UCHAR Byte4; /* MAC address byte 4 */
+ UCHAR Byte5; /* MAC address byte 5 */
UCHAR Rsvd0;
UCHAR Rsvd1;
} field;
@@ -1207,41 +1207,41 @@ typedef union _QOS_CSR1_STRUC {
#define RF_CSR_CFG 0x500
typedef union _RF_CSR_CFG_STRUC {
struct {
- UINT RF_CSR_DATA:8; // DATA
- UINT TESTCSR_RFACC_REGNUM:5; // RF register ID
- UINT Rsvd2:3; // Reserved
- UINT RF_CSR_WR:1; // 0: read 1: write
- UINT RF_CSR_KICK:1; // kick RF register read/write
- UINT Rsvd1:14; // Reserved
+ UINT RF_CSR_DATA:8; /* DATA */
+ UINT TESTCSR_RFACC_REGNUM:5; /* RF register ID */
+ UINT Rsvd2:3; /* Reserved */
+ UINT RF_CSR_WR:1; /* 0: read 1: write */
+ UINT RF_CSR_KICK:1; /* kick RF register read/write */
+ UINT Rsvd1:14; /* Reserved */
} field;
UINT word;
} RF_CSR_CFG_STRUC, *PRF_CSR_CFG_STRUC;
-//
-// Other on-chip shared memory space, base = 0x2000
-//
+/* */
+/* Other on-chip shared memory space, base = 0x2000 */
+/* */
-// CIS space - base address = 0x2000
+/* CIS space - base address = 0x2000 */
#define HW_CIS_BASE 0x2000
-// Carrier-sense CTS frame base address. It's where mac stores carrier-sense frame for carrier-sense function.
+/* Carrier-sense CTS frame base address. It's where mac stores carrier-sense frame for carrier-sense function. */
#define HW_CS_CTS_BASE 0x7700
-// DFS CTS frame base address. It's where mac stores CTS frame for DFS.
+/* DFS CTS frame base address. It's where mac stores CTS frame for DFS. */
#define HW_DFS_CTS_BASE 0x7780
#define HW_CTS_FRAME_SIZE 0x80
-// 2004-11-08 john - since NULL frame won't be that long (256 byte). We steal 16 tail bytes
-// to save debugging settings
-#define HW_DEBUG_SETTING_BASE 0x77f0 // 0x77f0~0x77ff total 16 bytes
-#define HW_DEBUG_SETTING_BASE2 0x7770 // 0x77f0~0x77ff total 16 bytes
-
-// In order to support maximum 8 MBSS and its maximum length is 512 for each beacon
-// Three section discontinue memory segments will be used.
-// 1. The original region for BCN 0~3
-// 2. Extract memory from FCE table for BCN 4~5
-// 3. Extract memory from Pair-wise key table for BCN 6~7
-// It occupied those memory of wcid 238~253 for BCN 6
-// and wcid 222~237 for BCN 7
+/* 2004-11-08 john - since NULL frame won't be that long (256 byte). We steal 16 tail bytes */
+/* to save debugging settings */
+#define HW_DEBUG_SETTING_BASE 0x77f0 /* 0x77f0~0x77ff total 16 bytes */
+#define HW_DEBUG_SETTING_BASE2 0x7770 /* 0x77f0~0x77ff total 16 bytes */
+
+/* In order to support maximum 8 MBSS and its maximum length is 512 for each beacon */
+/* Three section discontinue memory segments will be used. */
+/* 1. The original region for BCN 0~3 */
+/* 2. Extract memory from FCE table for BCN 4~5 */
+/* 3. Extract memory from Pair-wise key table for BCN 6~7 */
+/* It occupied those memory of wcid 238~253 for BCN 6 */
+/* and wcid 222~237 for BCN 7 */
#define HW_BEACON_MAX_SIZE 0x1000 /* unit: byte */
#define HW_BEACON_BASE0 0x7800
#define HW_BEACON_BASE1 0x7A00
@@ -1256,7 +1256,7 @@ typedef union _RF_CSR_CFG_STRUC {
#define HW_BEACON_OFFSET 0x0200
#define HW_BEACON_CONTENT_LEN (HW_BEACON_OFFSET - TXWI_SIZE)
-// HOST-MCU shared memory - base address = 0x2100
+/* HOST-MCU shared memory - base address = 0x2100 */
#define HOST_CMD_CSR 0x404
#define H2M_MAILBOX_CSR 0x7010
#define H2M_MAILBOX_CID 0x7014
@@ -1264,37 +1264,37 @@ typedef union _RF_CSR_CFG_STRUC {
#define H2M_INT_SRC 0x7024
#define H2M_BBP_AGENT 0x7028
#define M2H_CMD_DONE_CSR 0x000c
-#define MCU_TXOP_ARRAY_BASE 0x000c // TODO: to be provided by Albert
-#define MCU_TXOP_ENTRY_SIZE 32 // TODO: to be provided by Albert
-#define MAX_NUM_OF_TXOP_ENTRY 16 // TODO: must be same with 8051 firmware
-#define MCU_MBOX_VERSION 0x01 // TODO: to be confirmed by Albert
-#define MCU_MBOX_VERSION_OFFSET 5 // TODO: to be provided by Albert
-
-//
-// Host DMA registers - base address 0x200 . TX0-3=EDCAQid0-3, TX4=HCCA, TX5=MGMT,
-//
-//
-// DMA RING DESCRIPTOR
-//
+#define MCU_TXOP_ARRAY_BASE 0x000c /* TODO: to be provided by Albert */
+#define MCU_TXOP_ENTRY_SIZE 32 /* TODO: to be provided by Albert */
+#define MAX_NUM_OF_TXOP_ENTRY 16 /* TODO: must be same with 8051 firmware */
+#define MCU_MBOX_VERSION 0x01 /* TODO: to be confirmed by Albert */
+#define MCU_MBOX_VERSION_OFFSET 5 /* TODO: to be provided by Albert */
+
+/* */
+/* Host DMA registers - base address 0x200 . TX0-3=EDCAQid0-3, TX4=HCCA, TX5=MGMT, */
+/* */
+/* */
+/* DMA RING DESCRIPTOR */
+/* */
#define E2PROM_CSR 0x0004
#define IO_CNTL_CSR 0x77d0
-// ================================================================
-// Tx / Rx / Mgmt ring descriptor definition
-// ================================================================
+/* ================================================================ */
+/* Tx / Rx / Mgmt ring descriptor definition */
+/* ================================================================ */
-// the following PID values are used to mark outgoing frame type in TXD->PID so that
-// proper TX statistics can be collected based on these categories
-// b3-2 of PID field -
+/* the following PID values are used to mark outgoing frame type in TXD->PID so that */
+/* proper TX statistics can be collected based on these categories */
+/* b3-2 of PID field - */
#define PID_MGMT 0x05
#define PID_BEACON 0x0c
#define PID_DATA_NORMALUCAST 0x02
#define PID_DATA_AMPDU 0x04
#define PID_DATA_NO_ACK 0x08
#define PID_DATA_NOT_NORM_ACK 0x03
-// value domain of pTxD->HostQId (4-bit: 0~15)
-#define QID_AC_BK 1 // meet ACI definition in 802.11e
-#define QID_AC_BE 0 // meet ACI definition in 802.11e
+/* value domain of pTxD->HostQId (4-bit: 0~15) */
+#define QID_AC_BK 1 /* meet ACI definition in 802.11e */
+#define QID_AC_BE 0 /* meet ACI definition in 802.11e */
#define QID_AC_VI 2
#define QID_AC_VO 3
#define QID_HCCA 4
@@ -1303,4 +1303,4 @@ typedef union _RF_CSR_CFG_STRUC {
#define QID_RX 14
#define QID_OTHER 15
-#endif // __RTMP_MAC_H__ //
+#endif /* __RTMP_MAC_H__ // */
diff --git a/drivers/staging/rt2860/chip/rtmp_phy.h b/drivers/staging/rt2860/chip/rtmp_phy.h
index bbf920d..fd1a989 100644
--- a/drivers/staging/rt2860/chip/rtmp_phy.h
+++ b/drivers/staging/rt2860/chip/rtmp_phy.h
@@ -74,30 +74,30 @@
#define RF_R30 30
#define RF_R31 31
-// value domain of pAd->RfIcType
-#define RFIC_2820 1 // 2.4G 2T3R
-#define RFIC_2850 2 // 2.4G/5G 2T3R
-#define RFIC_2720 3 // 2.4G 1T2R
-#define RFIC_2750 4 // 2.4G/5G 1T2R
-#define RFIC_3020 5 // 2.4G 1T1R
-#define RFIC_2020 6 // 2.4G B/G
-#define RFIC_3021 7 // 2.4G 1T2R
-#define RFIC_3022 8 // 2.4G 2T2R
-#define RFIC_3052 9 // 2.4G/5G 2T2R
+/* value domain of pAd->RfIcType */
+#define RFIC_2820 1 /* 2.4G 2T3R */
+#define RFIC_2850 2 /* 2.4G/5G 2T3R */
+#define RFIC_2720 3 /* 2.4G 1T2R */
+#define RFIC_2750 4 /* 2.4G/5G 1T2R */
+#define RFIC_3020 5 /* 2.4G 1T1R */
+#define RFIC_2020 6 /* 2.4G B/G */
+#define RFIC_3021 7 /* 2.4G 1T2R */
+#define RFIC_3022 8 /* 2.4G 2T2R */
+#define RFIC_3052 9 /* 2.4G/5G 2T2R */
/*
BBP sections
*/
-#define BBP_R0 0 // version
-#define BBP_R1 1 // TSSI
-#define BBP_R2 2 // TX configure
+#define BBP_R0 0 /* version */
+#define BBP_R1 1 /* TSSI */
+#define BBP_R2 2 /* TX configure */
#define BBP_R3 3
#define BBP_R4 4
#define BBP_R5 5
#define BBP_R6 6
-#define BBP_R14 14 // RX configure
+#define BBP_R14 14 /* RX configure */
#define BBP_R16 16
-#define BBP_R17 17 // RX sensibility
+#define BBP_R17 17 /* RX sensibility */
#define BBP_R18 18
#define BBP_R21 21
#define BBP_R22 22
@@ -106,12 +106,12 @@
#define BBP_R26 26
#define BBP_R27 27
#define BBP_R31 31
-#define BBP_R49 49 //TSSI
+#define BBP_R49 49 /*TSSI */
#define BBP_R50 50
#define BBP_R51 51
#define BBP_R52 52
#define BBP_R55 55
-#define BBP_R62 62 // Rx SQ0 Threshold HIGH
+#define BBP_R62 62 /* Rx SQ0 Threshold HIGH */
#define BBP_R63 63
#define BBP_R64 64
#define BBP_R65 65
@@ -119,7 +119,7 @@
#define BBP_R67 67
#define BBP_R68 68
#define BBP_R69 69
-#define BBP_R70 70 // Rx AGC SQ CCK Xcorr threshold
+#define BBP_R70 70 /* Rx AGC SQ CCK Xcorr threshold */
#define BBP_R73 73
#define BBP_R75 75
#define BBP_R77 77
@@ -133,7 +133,7 @@
#define BBP_R86 86
#define BBP_R91 91
#define BBP_R92 92
-#define BBP_R94 94 // Tx Gain Control
+#define BBP_R94 94 /* Tx Gain Control */
#define BBP_R103 103
#define BBP_R105 105
#define BBP_R106 106
@@ -149,22 +149,22 @@
#define BBP_R122 122
#define BBP_R123 123
#ifdef RT30xx
-#define BBP_R138 138 // add by johnli, RF power sequence setup, ADC dynamic on/off control
-#endif // RT30xx //
+#define BBP_R138 138 /* add by johnli, RF power sequence setup, ADC dynamic on/off control */
+#endif /* RT30xx // */
-#define BBPR94_DEFAULT 0x06 // Add 1 value will gain 1db
+#define BBPR94_DEFAULT 0x06 /* Add 1 value will gain 1db */
-//
-// BBP & RF are using indirect access. Before write any value into it.
-// We have to make sure there is no outstanding command pending via checking busy bit.
-//
-#define MAX_BUSY_COUNT 100 // Number of retry before failing access BBP & RF indirect register
+/* */
+/* BBP & RF are using indirect access. Before write any value into it. */
+/* We have to make sure there is no outstanding command pending via checking busy bit. */
+/* */
+#define MAX_BUSY_COUNT 100 /* Number of retry before failing access BBP & RF indirect register */
-//#define PHY_TR_SWITCH_TIME 5 // usec
+/*#define PHY_TR_SWITCH_TIME 5 // usec */
-//#define BBP_R17_LOW_SENSIBILITY 0x50
-//#define BBP_R17_MID_SENSIBILITY 0x41
-//#define BBP_R17_DYNAMIC_UP_BOUND 0x40
+/*#define BBP_R17_LOW_SENSIBILITY 0x50 */
+/*#define BBP_R17_MID_SENSIBILITY 0x41 */
+/*#define BBP_R17_DYNAMIC_UP_BOUND 0x40 */
#define RSSI_FOR_VERY_LOW_SENSIBILITY -35
#define RSSI_FOR_LOW_SENSIBILITY -58
@@ -194,15 +194,15 @@
} \
} \
}
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
#ifdef RTMP_MAC_USB
#define RTMP_RF_IO_WRITE32(_A, _V) RTUSBWriteRFRegister(_A, _V)
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
#ifdef RT30xx
#define RTMP_RF_IO_READ8_BY_REG_ID(_A, _I, _pV) RT30xxReadRFRegister(_A, _I, _pV)
#define RTMP_RF_IO_WRITE8_BY_REG_ID(_A, _I, _V) RT30xxWriteRFRegister(_A, _I, _V)
-#endif // RT30xx //
+#endif /* RT30xx // */
/*****************************************************************************
BBP register Read/Write marco definitions.
@@ -276,7 +276,7 @@
But for some chipset which didn't have mcu (e.g., RBUS based chipset), we
will use this function too and didn't access the bbp register via the MCU.
*/
-// Read BBP register by register's ID. Generate PER to test BA
+/* Read BBP register by register's ID. Generate PER to test BA */
#define RTMP_BBP_IO_READ8_BY_REG_ID(_A, _I, _pV) \
{ \
BBP_CSR_CFG_STRUC BbpCsr; \
@@ -425,7 +425,7 @@
But for some chipset which didn't have mcu (e.g., RBUS based chipset), we
will use this function too and didn't access the bbp register via the MCU.
*/
-// Write BBP register by register's ID & value
+/* Write BBP register by register's ID & value */
#define RTMP_BBP_IO_WRITE8_BY_REG_ID(_A, _I, _V) \
{ \
BBP_CSR_CFG_STRUC BbpCsr; \
@@ -510,7 +510,7 @@
DBGPRINT_ERR(("****** BBP_Write_Latch Buffer exceeds max boundry ****** \n")); \
} \
}
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
#ifdef RTMP_MAC_USB
#define RTMP_BBP_IO_READ8_BY_REG_ID(_A, _I, _pV) RTUSBReadBBPRegister(_A, _I, _pV)
@@ -518,7 +518,7 @@
#define BBP_IO_WRITE8_BY_REG_ID(_A, _I, _V) RTUSBWriteBBPRegister(_A, _I, _V)
#define BBP_IO_READ8_BY_REG_ID(_A, _I, _pV) RTUSBReadBBPRegister(_A, _I, _pV)
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
#ifdef RT30xx
#define RTMP_ASIC_MMPS_DISABLE(_pAd) \
@@ -551,6 +551,6 @@
RTMP_IO_WRITE32(_pAd, 0x1210, _macData); \
}while(0)
-#endif // RT30xx //
+#endif /* RT30xx // */
-#endif // __RTMP_PHY_H__ //
+#endif /* __RTMP_PHY_H__ // */
diff --git a/drivers/staging/rt2860/chlist.h b/drivers/staging/rt2860/chlist.h
index e3d55b4..af8b5ca 100644
--- a/drivers/staging/rt2860/chlist.h
+++ b/drivers/staging/rt2860/chlist.h
@@ -52,14 +52,14 @@
typedef struct _CH_DESP {
UCHAR FirstChannel;
UCHAR NumOfCh;
- CHAR MaxTxPwr; // dBm
- UCHAR Geography; // 0:out door, 1:in door, 2:both
- BOOLEAN DfsReq; // Dfs require, 0: No, 1: yes.
+ CHAR MaxTxPwr; /* dBm */
+ UCHAR Geography; /* 0:out door, 1:in door, 2:both */
+ BOOLEAN DfsReq; /* Dfs require, 0: No, 1: yes. */
} CH_DESP, *PCH_DESP;
typedef struct _CH_REGION {
UCHAR CountReg[3];
- UCHAR DfsType; // 0: CE, 1: FCC, 2: JAP, 3:JAP_W53, JAP_W56
+ UCHAR DfsType; /* 0: CE, 1: FCC, 2: JAP, 3:JAP_W53, JAP_W56 */
CH_DESP ChDesp[10];
} CH_REGION, *PCH_REGION;
@@ -114,4 +114,4 @@ VOID N_SetCenCh(IN PRTMP_ADAPTER pAd);
UINT8 GetCuntryMaxTxPwr(IN PRTMP_ADAPTER pAd, IN UINT8 channel);
-#endif // __CHLIST_H__
+#endif /* __CHLIST_H__ */
diff --git a/drivers/staging/rt2860/eeprom.h b/drivers/staging/rt2860/eeprom.h
index 56aa583..4d8e8bf 100644
--- a/drivers/staging/rt2860/eeprom.h
+++ b/drivers/staging/rt2860/eeprom.h
@@ -43,25 +43,25 @@
************************************************************************/
int rtmp_ee_prom_read16(IN PRTMP_ADAPTER pAd,
IN USHORT Offset, OUT USHORT * pValue);
-#endif // RTMP_PCI_SUPPORT //
+#endif /* RTMP_PCI_SUPPORT // */
#ifdef RTMP_USB_SUPPORT
/*************************************************************************
* Public function declarations for usb-based prom chipset
************************************************************************/
NTSTATUS RTUSBReadEEPROM16(IN PRTMP_ADAPTER pAd,
IN USHORT offset, OUT PUSHORT pData);
-#endif // RTMP_USB_SUPPORT //
+#endif /* RTMP_USB_SUPPORT // */
#ifdef RT30xx
#ifdef RTMP_EFUSE_SUPPORT
int rtmp_ee_efuse_read16(IN RTMP_ADAPTER * pAd,
IN USHORT Offset, OUT USHORT * pValue);
-#endif // RTMP_EFUSE_SUPPORT //
-#endif // RT30xx //
+#endif /* RTMP_EFUSE_SUPPORT // */
+#endif /* RT30xx // */
/*************************************************************************
* Public function declarations for prom operation callback functions setting
************************************************************************/
INT RtmpChipOpsEepromHook(IN RTMP_ADAPTER * pAd, IN INT infType);
-#endif // __EEPROM_H__ //
+#endif /* __EEPROM_H__ // */
diff --git a/drivers/staging/rt2860/mlme.h b/drivers/staging/rt2860/mlme.h
index cb3cc9b..8585a4d 100644
--- a/drivers/staging/rt2860/mlme.h
+++ b/drivers/staging/rt2860/mlme.h
@@ -41,18 +41,18 @@
#include "rtmp_dot11.h"
-// maximum supported capability information -
-// ESS, IBSS, Privacy, Short Preamble, Spectrum mgmt, Short Slot
+/* maximum supported capability information - */
+/* ESS, IBSS, Privacy, Short Preamble, Spectrum mgmt, Short Slot */
#define SUPPORTED_CAPABILITY_INFO 0x0533
#define END_OF_ARGS -1
#define LFSR_MASK 0x80000057
-#define MLME_TASK_EXEC_INTV 100/*200*/ //
+#define MLME_TASK_EXEC_INTV 100/*200*/ /* */
#define LEAD_TIME 5
-#define MLME_TASK_EXEC_MULTIPLE 10 /*5*/ // MLME_TASK_EXEC_MULTIPLE * MLME_TASK_EXEC_INTV = 1 sec
-#define REORDER_EXEC_INTV 100 // 0.1 sec
+#define MLME_TASK_EXEC_MULTIPLE 10 /*5*/ /* MLME_TASK_EXEC_MULTIPLE * MLME_TASK_EXEC_INTV = 1 sec */
+#define REORDER_EXEC_INTV 100 /* 0.1 sec */
-// The definition of Radar detection duration region
+/* The definition of Radar detection duration region */
#define CE 0
#define FCC 1
#define JAP 2
@@ -60,61 +60,61 @@
#define JAP_W56 4
#define MAX_RD_REGION 5
-#define BEACON_LOST_TIME 4 * OS_HZ // 2048 msec = 2 sec
-
-#define DLS_TIMEOUT 1200 // unit: msec
-#define AUTH_TIMEOUT 300 // unit: msec
-#define ASSOC_TIMEOUT 300 // unit: msec
-#define JOIN_TIMEOUT 2000 // unit: msec
-#define SHORT_CHANNEL_TIME 90 // unit: msec
-#define MIN_CHANNEL_TIME 110 // unit: msec, for dual band scan
-#define MAX_CHANNEL_TIME 140 // unit: msec, for single band scan
-#define FAST_ACTIVE_SCAN_TIME 30 // Active scan waiting for probe response time
-#define CW_MIN_IN_BITS 4 // actual CwMin = 2^CW_MIN_IN_BITS - 1
-#define LINK_DOWN_TIMEOUT 20000 // unit: msec
-#define AUTO_WAKEUP_TIMEOUT 70 //unit: msec
-
-#define CW_MAX_IN_BITS 10 // actual CwMax = 2^CW_MAX_IN_BITS - 1
-
-// Note: RSSI_TO_DBM_OFFSET has been changed to variable for new RF (2004-0720).
-// SHould not refer to this constant anymore
-//#define RSSI_TO_DBM_OFFSET 120 // for RT2530 RSSI-115 = dBm
-#define RSSI_FOR_MID_TX_POWER -55 // -55 db is considered mid-distance
-#define RSSI_FOR_LOW_TX_POWER -45 // -45 db is considered very short distance and
- // eligible to use a lower TX power
+#define BEACON_LOST_TIME 4 * OS_HZ /* 2048 msec = 2 sec */
+
+#define DLS_TIMEOUT 1200 /* unit: msec */
+#define AUTH_TIMEOUT 300 /* unit: msec */
+#define ASSOC_TIMEOUT 300 /* unit: msec */
+#define JOIN_TIMEOUT 2000 /* unit: msec */
+#define SHORT_CHANNEL_TIME 90 /* unit: msec */
+#define MIN_CHANNEL_TIME 110 /* unit: msec, for dual band scan */
+#define MAX_CHANNEL_TIME 140 /* unit: msec, for single band scan */
+#define FAST_ACTIVE_SCAN_TIME 30 /* Active scan waiting for probe response time */
+#define CW_MIN_IN_BITS 4 /* actual CwMin = 2^CW_MIN_IN_BITS - 1 */
+#define LINK_DOWN_TIMEOUT 20000 /* unit: msec */
+#define AUTO_WAKEUP_TIMEOUT 70 /*unit: msec */
+
+#define CW_MAX_IN_BITS 10 /* actual CwMax = 2^CW_MAX_IN_BITS - 1 */
+
+/* Note: RSSI_TO_DBM_OFFSET has been changed to variable for new RF (2004-0720). */
+/* SHould not refer to this constant anymore */
+/*#define RSSI_TO_DBM_OFFSET 120 // for RT2530 RSSI-115 = dBm */
+#define RSSI_FOR_MID_TX_POWER -55 /* -55 db is considered mid-distance */
+#define RSSI_FOR_LOW_TX_POWER -45 /* -45 db is considered very short distance and */
+ /* eligible to use a lower TX power */
#define RSSI_FOR_LOWEST_TX_POWER -30
-//#define MID_TX_POWER_DELTA 0 // 0 db from full TX power upon mid-distance to AP
-#define LOW_TX_POWER_DELTA 6 // -3 db from full TX power upon very short distance. 1 grade is 0.5 db
-#define LOWEST_TX_POWER_DELTA 16 // -8 db from full TX power upon shortest distance. 1 grade is 0.5 db
+/*#define MID_TX_POWER_DELTA 0 // 0 db from full TX power upon mid-distance to AP */
+#define LOW_TX_POWER_DELTA 6 /* -3 db from full TX power upon very short distance. 1 grade is 0.5 db */
+#define LOWEST_TX_POWER_DELTA 16 /* -8 db from full TX power upon shortest distance. 1 grade is 0.5 db */
#define RSSI_TRIGGERED_UPON_BELOW_THRESHOLD 0
#define RSSI_TRIGGERED_UPON_EXCCEED_THRESHOLD 1
#define RSSI_THRESHOLD_FOR_ROAMING 25
#define RSSI_DELTA 5
-// Channel Quality Indication
+/* Channel Quality Indication */
#define CQI_IS_GOOD(cqi) ((cqi) >= 50)
-//#define CQI_IS_FAIR(cqi) (((cqi) >= 20) && ((cqi) < 50))
-#define CQI_IS_POOR(cqi) (cqi < 50) //(((cqi) >= 5) && ((cqi) < 20))
+/*#define CQI_IS_FAIR(cqi) (((cqi) >= 20) && ((cqi) < 50)) */
+#define CQI_IS_POOR(cqi) (cqi < 50) /*(((cqi) >= 5) && ((cqi) < 20)) */
#define CQI_IS_BAD(cqi) (cqi < 5)
#define CQI_IS_DEAD(cqi) (cqi == 0)
-// weighting factor to calculate Channel quality, total should be 100%
+/* weighting factor to calculate Channel quality, total should be 100% */
#define RSSI_WEIGHTING 50
#define TX_WEIGHTING 30
#define RX_WEIGHTING 20
#define BSS_NOT_FOUND 0xFFFFFFFF
-#define MAX_LEN_OF_MLME_QUEUE 40 //10
+#define MAX_LEN_OF_MLME_QUEUE 40 /*10 */
-#define SCAN_PASSIVE 18 // scan with no probe request, only wait beacon and probe response
-#define SCAN_ACTIVE 19 // scan with probe request, and wait beacon and probe response
-#define SCAN_CISCO_PASSIVE 20 // Single channel passive scan
-#define SCAN_CISCO_ACTIVE 21 // Single channel active scan
-#define SCAN_CISCO_NOISE 22 // Single channel passive scan for noise histogram collection
-#define SCAN_CISCO_CHANNEL_LOAD 23 // Single channel passive scan for channel load collection
-#define FAST_SCAN_ACTIVE 24 // scan with probe request, and wait beacon and probe response
+#define SCAN_PASSIVE 18 /* scan with no probe request, only wait beacon and probe response */
+#define SCAN_ACTIVE 19 /* scan with probe request, and wait beacon and probe response */
+#define SCAN_CISCO_PASSIVE 20 /* Single channel passive scan */
+#define SCAN_CISCO_ACTIVE 21 /* Single channel active scan */
+#define SCAN_CISCO_NOISE 22 /* Single channel passive scan for noise histogram collection */
+#define SCAN_CISCO_CHANNEL_LOAD 23 /* Single channel passive scan for channel load collection */
+#define FAST_SCAN_ACTIVE 24 /* scan with probe request, and wait beacon and probe response */
#define MAC_ADDR_IS_GROUP(Addr) (((Addr[0]) & 0x01))
#define MAC_ADDR_HASH(Addr) (Addr[0] ^ Addr[1] ^ Addr[2] ^ Addr[3] ^ Addr[4] ^ Addr[5])
@@ -122,13 +122,13 @@
#define TID_MAC_HASH(Addr,TID) (TID^Addr[0] ^ Addr[1] ^ Addr[2] ^ Addr[3] ^ Addr[4] ^ Addr[5])
#define TID_MAC_HASH_INDEX(Addr,TID) (TID_MAC_HASH(Addr,TID) % HASH_TABLE_SIZE)
-// LED Control
-// assoiation ON. one LED ON. another blinking when TX, OFF when idle
-// no association, both LED off
+/* LED Control */
+/* assoiation ON. one LED ON. another blinking when TX, OFF when idle */
+/* no association, both LED off */
#define ASIC_LED_ACT_ON(pAd) RTMP_IO_WRITE32(pAd, MAC_CSR14, 0x00031e46)
#define ASIC_LED_ACT_OFF(pAd) RTMP_IO_WRITE32(pAd, MAC_CSR14, 0x00001e46)
-// bit definition of the 2-byte pBEACON->Capability field
+/* bit definition of the 2-byte pBEACON->Capability field */
#define CAP_IS_ESS_ON(x) (((x) & 0x0001) != 0)
#define CAP_IS_IBSS_ON(x) (((x) & 0x0002) != 0)
#define CAP_IS_CF_POLLABLE_ON(x) (((x) & 0x0004) != 0)
@@ -137,44 +137,44 @@
#define CAP_IS_SHORT_PREAMBLE_ON(x) (((x) & 0x0020) != 0)
#define CAP_IS_PBCC_ON(x) (((x) & 0x0040) != 0)
#define CAP_IS_AGILITY_ON(x) (((x) & 0x0080) != 0)
-#define CAP_IS_SPECTRUM_MGMT(x) (((x) & 0x0100) != 0) // 802.11e d9
-#define CAP_IS_QOS(x) (((x) & 0x0200) != 0) // 802.11e d9
+#define CAP_IS_SPECTRUM_MGMT(x) (((x) & 0x0100) != 0) /* 802.11e d9 */
+#define CAP_IS_QOS(x) (((x) & 0x0200) != 0) /* 802.11e d9 */
#define CAP_IS_SHORT_SLOT(x) (((x) & 0x0400) != 0)
-#define CAP_IS_APSD(x) (((x) & 0x0800) != 0) // 802.11e d9
-#define CAP_IS_IMMED_BA(x) (((x) & 0x1000) != 0) // 802.11e d9
+#define CAP_IS_APSD(x) (((x) & 0x0800) != 0) /* 802.11e d9 */
+#define CAP_IS_IMMED_BA(x) (((x) & 0x1000) != 0) /* 802.11e d9 */
#define CAP_IS_DSSS_OFDM(x) (((x) & 0x2000) != 0)
-#define CAP_IS_DELAY_BA(x) (((x) & 0x4000) != 0) // 802.11e d9
+#define CAP_IS_DELAY_BA(x) (((x) & 0x4000) != 0) /* 802.11e d9 */
#define CAP_GENERATE(ess,ibss,priv,s_pre,s_slot,spectrum) (((ess) ? 0x0001 : 0x0000) | ((ibss) ? 0x0002 : 0x0000) | ((priv) ? 0x0010 : 0x0000) | ((s_pre) ? 0x0020 : 0x0000) | ((s_slot) ? 0x0400 : 0x0000) | ((spectrum) ? 0x0100 : 0x0000))
-#define ERP_IS_NON_ERP_PRESENT(x) (((x) & 0x01) != 0) // 802.11g
-#define ERP_IS_USE_PROTECTION(x) (((x) & 0x02) != 0) // 802.11g
-#define ERP_IS_USE_BARKER_PREAMBLE(x) (((x) & 0x04) != 0) // 802.11g
+#define ERP_IS_NON_ERP_PRESENT(x) (((x) & 0x01) != 0) /* 802.11g */
+#define ERP_IS_USE_PROTECTION(x) (((x) & 0x02) != 0) /* 802.11g */
+#define ERP_IS_USE_BARKER_PREAMBLE(x) (((x) & 0x04) != 0) /* 802.11g */
-#define DRS_TX_QUALITY_WORST_BOUND 8 // 3 // just test by gary
+#define DRS_TX_QUALITY_WORST_BOUND 8 /* 3 // just test by gary */
#define DRS_PENALTY 8
#define BA_NOTUSE 2
-//BA Policy subfiled value in ADDBA frame
+/*BA Policy subfiled value in ADDBA frame */
#define IMMED_BA 1
#define DELAY_BA 0
-// BA Initiator subfield in DELBA frame
+/* BA Initiator subfield in DELBA frame */
#define ORIGINATOR 1
#define RECIPIENT 0
-// ADDBA Status Code
+/* ADDBA Status Code */
#define ADDBA_RESULTCODE_SUCCESS 0
#define ADDBA_RESULTCODE_REFUSED 37
#define ADDBA_RESULTCODE_INVALID_PARAMETERS 38
-// DELBA Reason Code
+/* DELBA Reason Code */
#define DELBA_REASONCODE_QSTA_LEAVING 36
#define DELBA_REASONCODE_END_BA 37
#define DELBA_REASONCODE_UNKNOWN_BA 38
#define DELBA_REASONCODE_TIMEOUT 39
-// reset all OneSecTx counters
+/* reset all OneSecTx counters */
#define RESET_ONE_SEC_TX_CNT(__pEntry) \
if (((__pEntry)) != NULL) \
{ \
@@ -183,38 +183,38 @@ if (((__pEntry)) != NULL) \
(__pEntry)->OneSecTxNoRetryOkCount = 0; \
}
-//
-// 802.11 frame formats
-//
-// HT Capability INFO field in HT Cap IE .
+/* */
+/* 802.11 frame formats */
+/* */
+/* HT Capability INFO field in HT Cap IE . */
typedef struct PACKED {
USHORT AdvCoding:1;
USHORT ChannelWidth:1;
- USHORT MimoPs:2; //momi power safe
- USHORT GF:1; //green field
+ USHORT MimoPs:2; /*momi power safe */
+ USHORT GF:1; /*green field */
USHORT ShortGIfor20:1;
- USHORT ShortGIfor40:1; //for40MHz
+ USHORT ShortGIfor40:1; /*for40MHz */
USHORT TxSTBC:1;
USHORT RxSTBC:2;
- USHORT DelayedBA:1; //rt2860c not support
- USHORT AMsduSize:1; // only support as zero
+ USHORT DelayedBA:1; /*rt2860c not support */
+ USHORT AMsduSize:1; /* only support as zero */
USHORT CCKmodein40:1;
USHORT PSMP:1;
USHORT Forty_Mhz_Intolerant:1;
USHORT LSIGTxopProSup:1;
} HT_CAP_INFO, *PHT_CAP_INFO;
-// HT Capability INFO field in HT Cap IE .
+/* HT Capability INFO field in HT Cap IE . */
typedef struct PACKED {
UCHAR MaxRAmpduFactor:2;
UCHAR MpduDensity:3;
- UCHAR rsv:3; //momi power safe
+ UCHAR rsv:3; /*momi power safe */
} HT_CAP_PARM, *PHT_CAP_PARM;
-// HT Capability INFO field in HT Cap IE .
+/* HT Capability INFO field in HT Cap IE . */
typedef struct PACKED {
UCHAR MCSSet[10];
- UCHAR SupRate[2]; // unit : 1Mbps
+ UCHAR SupRate[2]; /* unit : 1Mbps */
UCHAR TxMCSSetDefined:1;
UCHAR TxRxNotEqual:1;
UCHAR TxStream:2;
@@ -223,18 +223,18 @@ typedef struct PACKED {
UCHAR rsv3[3];
} HT_MCS_SET, *PHT_MCS_SET;
-// HT Capability INFO field in HT Cap IE .
+/* HT Capability INFO field in HT Cap IE . */
typedef struct PACKED {
USHORT Pco:1;
USHORT TranTime:2;
- USHORT rsv:5; //momi power safe
- USHORT MCSFeedback:2; //0:no MCS feedback, 2:unsolicited MCS feedback, 3:Full MCS feedback, 1:rsv.
- USHORT PlusHTC:1; //+HTC control field support
- USHORT RDGSupport:1; //reverse Direction Grant support
+ USHORT rsv:5; /*momi power safe */
+ USHORT MCSFeedback:2; /*0:no MCS feedback, 2:unsolicited MCS feedback, 3:Full MCS feedback, 1:rsv. */
+ USHORT PlusHTC:1; /*+HTC control field support */
+ USHORT RDGSupport:1; /*reverse Direction Grant support */
USHORT rsv2:4;
} EXT_HT_CAP_INFO, *PEXT_HT_CAP_INFO;
-// HT Beamforming field in HT Cap IE .
+/* HT Beamforming field in HT Cap IE . */
typedef struct PACKED _HT_BF_CAP {
ULONG TxBFRecCapable:1;
ULONG RxSoundCapable:1;
@@ -258,7 +258,7 @@ typedef struct PACKED _HT_BF_CAP {
ULONG rsv:3;
} HT_BF_CAP, *PHT_BF_CAP;
-// HT antenna selection field in HT Cap IE .
+/* HT antenna selection field in HT Cap IE . */
typedef struct PACKED _HT_AS_CAP {
UCHAR AntSelect:1;
UCHAR ExpCSIFbkTxASEL:1;
@@ -270,48 +270,48 @@ typedef struct PACKED _HT_AS_CAP {
UCHAR rsv:1;
} HT_AS_CAP, *PHT_AS_CAP;
-// Draft 1.0 set IE length 26, but is extensible..
+/* Draft 1.0 set IE length 26, but is extensible.. */
#define SIZE_HT_CAP_IE 26
-// The structure for HT Capability IE.
+/* The structure for HT Capability IE. */
typedef struct PACKED _HT_CAPABILITY_IE {
HT_CAP_INFO HtCapInfo;
HT_CAP_PARM HtCapParm;
-// HT_MCS_SET HtMCSSet;
+/* HT_MCS_SET HtMCSSet; */
UCHAR MCSSet[16];
EXT_HT_CAP_INFO ExtHtCapInfo;
- HT_BF_CAP TxBFCap; // beamforming cap. rt2860c not support beamforming.
- HT_AS_CAP ASCap; //antenna selection.
+ HT_BF_CAP TxBFCap; /* beamforming cap. rt2860c not support beamforming. */
+ HT_AS_CAP ASCap; /*antenna selection. */
} HT_CAPABILITY_IE, *PHT_CAPABILITY_IE;
-// 802.11n draft3 related structure definitions.
-// 7.3.2.60
-#define dot11OBSSScanPassiveDwell 20 // in TU. min amount of time that the STA continously scans each channel when performing an active OBSS scan.
-#define dot11OBSSScanActiveDwell 10 // in TU.min amount of time that the STA continously scans each channel when performing an passive OBSS scan.
-#define dot11BSSWidthTriggerScanInterval 300 // in sec. max interval between scan operations to be performed to detect BSS channel width trigger events.
-#define dot11OBSSScanPassiveTotalPerChannel 200 // in TU. min total amount of time that the STA scans each channel when performing a passive OBSS scan.
-#define dot11OBSSScanActiveTotalPerChannel 20 //in TU. min total amount of time that the STA scans each channel when performing a active OBSS scan
-#define dot11BSSWidthChannelTransactionDelayFactor 5 // min ratio between the delay time in performing a switch from 20MHz BSS to 20/40 BSS operation and the maximum
- // interval between overlapping BSS scan operations.
-#define dot11BSSScanActivityThreshold 25 // in %%, max total time that a STA may be active on the medium during a period of
- // (dot11BSSWidthChannelTransactionDelayFactor * dot11BSSWidthTriggerScanInterval) seconds without
- // being obligated to perform OBSS Scan operations. default is 25(== 0.25%)
+/* 802.11n draft3 related structure definitions. */
+/* 7.3.2.60 */
+#define dot11OBSSScanPassiveDwell 20 /* in TU. min amount of time that the STA continously scans each channel when performing an active OBSS scan. */
+#define dot11OBSSScanActiveDwell 10 /* in TU.min amount of time that the STA continously scans each channel when performing an passive OBSS scan. */
+#define dot11BSSWidthTriggerScanInterval 300 /* in sec. max interval between scan operations to be performed to detect BSS channel width trigger events. */
+#define dot11OBSSScanPassiveTotalPerChannel 200 /* in TU. min total amount of time that the STA scans each channel when performing a passive OBSS scan. */
+#define dot11OBSSScanActiveTotalPerChannel 20 /*in TU. min total amount of time that the STA scans each channel when performing a active OBSS scan */
+#define dot11BSSWidthChannelTransactionDelayFactor 5 /* min ratio between the delay time in performing a switch from 20MHz BSS to 20/40 BSS operation and the maximum */
+ /* interval between overlapping BSS scan operations. */
+#define dot11BSSScanActivityThreshold 25 /* in %%, max total time that a STA may be active on the medium during a period of */
+ /* (dot11BSSWidthChannelTransactionDelayFactor * dot11BSSWidthTriggerScanInterval) seconds without */
+ /* being obligated to perform OBSS Scan operations. default is 25(== 0.25%) */
typedef struct PACKED _OVERLAP_BSS_SCAN_IE {
USHORT ScanPassiveDwell;
USHORT ScanActiveDwell;
- USHORT TriggerScanInt; // Trigger scan interval
- USHORT PassiveTalPerChannel; // passive total per channel
- USHORT ActiveTalPerChannel; // active total per channel
- USHORT DelayFactor; // BSS width channel transition delay factor
- USHORT ScanActThre; // Scan Activity threshold
+ USHORT TriggerScanInt; /* Trigger scan interval */
+ USHORT PassiveTalPerChannel; /* passive total per channel */
+ USHORT ActiveTalPerChannel; /* active total per channel */
+ USHORT DelayFactor; /* BSS width channel transition delay factor */
+ USHORT ScanActThre; /* Scan Activity threshold */
} OVERLAP_BSS_SCAN_IE, *POVERLAP_BSS_SCAN_IE;
-// 7.3.2.56. 20/40 Coexistence element used in Element ID = 72 = IE_2040_BSS_COEXIST
+/* 7.3.2.56. 20/40 Coexistence element used in Element ID = 72 = IE_2040_BSS_COEXIST */
typedef union PACKED _BSS_2040_COEXIST_IE {
struct PACKED {
UCHAR InfoReq:1;
- UCHAR Intolerant40:1; // Inter-BSS. set 1 when prohibits a receiving BSS from operating as a 20/40 Mhz BSS.
- UCHAR BSS20WidthReq:1; // Intra-BSS set 1 when prohibits a receiving AP from operating its BSS as a 20/40MHz BSS.
+ UCHAR Intolerant40:1; /* Inter-BSS. set 1 when prohibits a receiving BSS from operating as a 20/40 Mhz BSS. */
+ UCHAR BSS20WidthReq:1; /* Intra-BSS set 1 when prohibits a receiving AP from operating its BSS as a 20/40MHz BSS. */
UCHAR rsv:5;
} field;
UCHAR word;
@@ -320,22 +320,22 @@ typedef union PACKED _BSS_2040_COEXIST_IE {
typedef struct _TRIGGER_EVENTA {
BOOLEAN bValid;
UCHAR BSSID[6];
- UCHAR RegClass; // Regulatory Class
+ UCHAR RegClass; /* Regulatory Class */
USHORT Channel;
- ULONG CDCounter; // Maintain a seperate count down counter for each Event A.
+ ULONG CDCounter; /* Maintain a seperate count down counter for each Event A. */
} TRIGGER_EVENTA, *PTRIGGER_EVENTA;
-// 20/40 trigger event table
-// If one Event A delete or created, or if Event B is detected or not detected, STA should send 2040BSSCoexistence to AP.
+/* 20/40 trigger event table */
+/* If one Event A delete or created, or if Event B is detected or not detected, STA should send 2040BSSCoexistence to AP. */
#define MAX_TRIGGER_EVENT 64
typedef struct _TRIGGER_EVENT_TAB {
UCHAR EventANo;
TRIGGER_EVENTA EventA[MAX_TRIGGER_EVENT];
- ULONG EventBCountDown; // Count down counter for Event B.
+ ULONG EventBCountDown; /* Count down counter for Event B. */
} TRIGGER_EVENT_TAB, *PTRIGGER_EVENT_TAB;
-// 7.3.27 20/40 Bss Coexistence Mgmt capability used in extended capabilities information IE( ID = 127 = IE_EXT_CAPABILITY).
-// This is the first octet and was defined in 802.11n D3.03 and 802.11yD9.0
+/* 7.3.27 20/40 Bss Coexistence Mgmt capability used in extended capabilities information IE( ID = 127 = IE_EXT_CAPABILITY). */
+/* This is the first octet and was defined in 802.11n D3.03 and 802.11yD9.0 */
typedef struct PACKED _EXT_CAP_INFO_ELEMENT {
UCHAR BssCoexistMgmtSupport:1;
UCHAR rsv:1;
@@ -343,59 +343,59 @@ typedef struct PACKED _EXT_CAP_INFO_ELEMENT {
UCHAR rsv2:5;
} EXT_CAP_INFO_ELEMENT, *PEXT_CAP_INFO_ELEMENT;
-// 802.11n 7.3.2.61
+/* 802.11n 7.3.2.61 */
typedef struct PACKED _BSS_2040_COEXIST_ELEMENT {
- UCHAR ElementID; // ID = IE_2040_BSS_COEXIST = 72
+ UCHAR ElementID; /* ID = IE_2040_BSS_COEXIST = 72 */
UCHAR Len;
BSS_2040_COEXIST_IE BssCoexistIe;
} BSS_2040_COEXIST_ELEMENT, *PBSS_2040_COEXIST_ELEMENT;
-//802.11n 7.3.2.59
+/*802.11n 7.3.2.59 */
typedef struct PACKED _BSS_2040_INTOLERANT_CH_REPORT {
- UCHAR ElementID; // ID = IE_2040_BSS_INTOLERANT_REPORT = 73
+ UCHAR ElementID; /* ID = IE_2040_BSS_INTOLERANT_REPORT = 73 */
UCHAR Len;
UCHAR RegulatoryClass;
UCHAR ChList[0];
} BSS_2040_INTOLERANT_CH_REPORT, *PBSS_2040_INTOLERANT_CH_REPORT;
-// The structure for channel switch annoucement IE. This is in 802.11n D3.03
+/* The structure for channel switch annoucement IE. This is in 802.11n D3.03 */
typedef struct PACKED _CHA_SWITCH_ANNOUNCE_IE {
- UCHAR SwitchMode; //channel switch mode
- UCHAR NewChannel; //
- UCHAR SwitchCount; //
+ UCHAR SwitchMode; /*channel switch mode */
+ UCHAR NewChannel; /* */
+ UCHAR SwitchCount; /* */
} CHA_SWITCH_ANNOUNCE_IE, *PCHA_SWITCH_ANNOUNCE_IE;
-// The structure for channel switch annoucement IE. This is in 802.11n D3.03
+/* The structure for channel switch annoucement IE. This is in 802.11n D3.03 */
typedef struct PACKED _SEC_CHA_OFFSET_IE {
- UCHAR SecondaryChannelOffset; // 1: Secondary above, 3: Secondary below, 0: no Secondary
+ UCHAR SecondaryChannelOffset; /* 1: Secondary above, 3: Secondary below, 0: no Secondary */
} SEC_CHA_OFFSET_IE, *PSEC_CHA_OFFSET_IE;
-// This structure is extracted from struct RT_HT_CAPABILITY
+/* This structure is extracted from struct RT_HT_CAPABILITY */
typedef struct {
- BOOLEAN bHtEnable; // If we should use ht rate.
- BOOLEAN bPreNHt; // If we should use ht rate.
- //Substract from HT Capability IE
+ BOOLEAN bHtEnable; /* If we should use ht rate. */
+ BOOLEAN bPreNHt; /* If we should use ht rate. */
+ /*Substract from HT Capability IE */
UCHAR MCSSet[16];
} RT_HT_PHY_INFO, *PRT_HT_PHY_INFO;
-//This structure substracts ralink supports from all 802.11n-related features.
-//Features not listed here but contained in 802.11n spec are not supported in rt2860.
+/*This structure substracts ralink supports from all 802.11n-related features. */
+/*Features not listed here but contained in 802.11n spec are not supported in rt2860. */
typedef struct {
USHORT ChannelWidth:1;
- USHORT MimoPs:2; //mimo power safe MMPS_
- USHORT GF:1; //green field
+ USHORT MimoPs:2; /*mimo power safe MMPS_ */
+ USHORT GF:1; /*green field */
USHORT ShortGIfor20:1;
- USHORT ShortGIfor40:1; //for40MHz
+ USHORT ShortGIfor40:1; /*for40MHz */
USHORT TxSTBC:1;
- USHORT RxSTBC:2; // 2 bits
- USHORT AmsduEnable:1; // Enable to transmit A-MSDU. Suggest disable. We should use A-MPDU to gain best benifit of 802.11n
- USHORT AmsduSize:1; // Max receiving A-MSDU size
+ USHORT RxSTBC:2; /* 2 bits */
+ USHORT AmsduEnable:1; /* Enable to transmit A-MSDU. Suggest disable. We should use A-MPDU to gain best benifit of 802.11n */
+ USHORT AmsduSize:1; /* Max receiving A-MSDU size */
USHORT rsv:5;
- //Substract from Addiont HT INFO IE
+ /*Substract from Addiont HT INFO IE */
UCHAR MaxRAmpduFactor:2;
UCHAR MpduDensity:3;
- UCHAR ExtChanOffset:2; // Please not the difference with following UCHAR NewExtChannelOffset; from 802.11n
+ UCHAR ExtChanOffset:2; /* Please not the difference with following UCHAR NewExtChannelOffset; from 802.11n */
UCHAR RecomWidth:1;
USHORT OperaionMode:2;
@@ -404,19 +404,19 @@ typedef struct {
USHORT OBSS_NonHTExist:1;
USHORT rsv2:11;
- // New Extension Channel Offset IE
+ /* New Extension Channel Offset IE */
UCHAR NewExtChannelOffset;
- // Extension Capability IE = 127
+ /* Extension Capability IE = 127 */
UCHAR BSSCoexist2040;
} RT_HT_CAPABILITY, *PRT_HT_CAPABILITY;
-// field in Addtional HT Information IE .
+/* field in Addtional HT Information IE . */
typedef struct PACKED {
UCHAR ExtChanOffset:2;
UCHAR RecomWidth:1;
UCHAR RifsMode:1;
- UCHAR S_PSMPSup:1; //Indicate support for scheduled PSMP
- UCHAR SerInterGranu:3; //service interval granularity
+ UCHAR S_PSMPSup:1; /*Indicate support for scheduled PSMP */
+ UCHAR SerInterGranu:3; /*service interval granularity */
} ADD_HTINFO, *PADD_HTINFO;
typedef struct PACKED {
@@ -427,13 +427,13 @@ typedef struct PACKED {
USHORT rsv2:11;
} ADD_HTINFO2, *PADD_HTINFO2;
-// TODO: Need sync with spec about the definition of StbcMcs. In Draft 3.03, it's reserved.
+/* TODO: Need sync with spec about the definition of StbcMcs. In Draft 3.03, it's reserved. */
typedef struct PACKED {
USHORT StbcMcs:6;
USHORT DualBeacon:1;
USHORT DualCTSProtect:1;
USHORT STBCBeacon:1;
- USHORT LsigTxopProt:1; // L-SIG TXOP protection full support
+ USHORT LsigTxopProt:1; /* L-SIG TXOP protection full support */
USHORT PcoActive:1;
USHORT PcoPhase:1;
USHORT rsv:4;
@@ -445,7 +445,7 @@ typedef struct PACKED {
ADD_HTINFO AddHtInfo;
ADD_HTINFO2 AddHtInfo2;
ADD_HTINFO3 AddHtInfo3;
- UCHAR MCSSet[16]; // Basic MCS set
+ UCHAR MCSSet[16]; /* Basic MCS set */
} ADD_HT_INFO_IE, *PADD_HT_INFO_IE;
typedef struct PACKED {
@@ -457,7 +457,7 @@ typedef struct PACKED _FRAME_802_11 {
UCHAR Octet[1];
} FRAME_802_11, *PFRAME_802_11;
-// QoSNull embedding of management action. When HT Control MA field set to 1.
+/* QoSNull embedding of management action. When HT Control MA field set to 1. */
typedef struct PACKED _MA_BODY {
UCHAR Category;
UCHAR Action;
@@ -469,51 +469,51 @@ typedef struct PACKED _HEADER_802_3 {
UCHAR SAAddr2[MAC_ADDR_LEN];
UCHAR Octet[2];
} HEADER_802_3, *PHEADER_802_3;
-////Block ACK related format
-// 2-byte BA Parameter field in DELBA frames to terminate an already set up bA
+/*//Block ACK related format */
+/* 2-byte BA Parameter field in DELBA frames to terminate an already set up bA */
typedef struct PACKED {
- USHORT Rsv:11; // always set to 0
- USHORT Initiator:1; // 1: originator 0:recipient
- USHORT TID:4; // value of TC os TS
+ USHORT Rsv:11; /* always set to 0 */
+ USHORT Initiator:1; /* 1: originator 0:recipient */
+ USHORT TID:4; /* value of TC os TS */
} DELBA_PARM, *PDELBA_PARM;
-// 2-byte BA Parameter Set field in ADDBA frames to signal parm for setting up a BA
+/* 2-byte BA Parameter Set field in ADDBA frames to signal parm for setting up a BA */
typedef struct PACKED {
- USHORT AMSDUSupported:1; // 0: not permitted 1: permitted
- USHORT BAPolicy:1; // 1: immediately BA 0:delayed BA
- USHORT TID:4; // value of TC os TS
- USHORT BufSize:10; // number of buffe of size 2304 octetsr
+ USHORT AMSDUSupported:1; /* 0: not permitted 1: permitted */
+ USHORT BAPolicy:1; /* 1: immediately BA 0:delayed BA */
+ USHORT TID:4; /* value of TC os TS */
+ USHORT BufSize:10; /* number of buffe of size 2304 octetsr */
} BA_PARM, *PBA_PARM;
-// 2-byte BA Starting Seq CONTROL field
+/* 2-byte BA Starting Seq CONTROL field */
typedef union PACKED {
struct PACKED {
- USHORT FragNum:4; // always set to 0
- USHORT StartSeq:12; // sequence number of the 1st MSDU for which this BAR is sent
+ USHORT FragNum:4; /* always set to 0 */
+ USHORT StartSeq:12; /* sequence number of the 1st MSDU for which this BAR is sent */
} field;
USHORT word;
} BASEQ_CONTROL, *PBASEQ_CONTROL;
-//BAControl and BARControl are the same
-// 2-byte BA CONTROL field in BA frame
+/*BAControl and BARControl are the same */
+/* 2-byte BA CONTROL field in BA frame */
typedef struct PACKED {
- USHORT ACKPolicy:1; // only related to N-Delayed BA. But not support in RT2860b. 0:NormalACK 1:No ACK
- USHORT MTID:1; //EWC V1.24
+ USHORT ACKPolicy:1; /* only related to N-Delayed BA. But not support in RT2860b. 0:NormalACK 1:No ACK */
+ USHORT MTID:1; /*EWC V1.24 */
USHORT Compressed:1;
USHORT Rsv:9;
USHORT TID:4;
} BA_CONTROL, *PBA_CONTROL;
-// 2-byte BAR CONTROL field in BAR frame
+/* 2-byte BAR CONTROL field in BAR frame */
typedef struct PACKED {
- USHORT ACKPolicy:1; // 0:normal ack, 1:no ack.
- USHORT MTID:1; //if this bit1, use FRAME_MTBA_REQ, if 0, use FRAME_BA_REQ
+ USHORT ACKPolicy:1; /* 0:normal ack, 1:no ack. */
+ USHORT MTID:1; /*if this bit1, use FRAME_MTBA_REQ, if 0, use FRAME_BA_REQ */
USHORT Compressed:1;
USHORT Rsv1:9;
USHORT TID:4;
} BAR_CONTROL, *PBAR_CONTROL;
-// BARControl in MTBAR frame
+/* BARControl in MTBAR frame */
typedef struct PACKED {
USHORT ACKPolicy:1;
USHORT MTID:1;
@@ -532,7 +532,7 @@ typedef struct {
BASEQ_CONTROL BAStartingSeq;
} EACH_TID, *PEACH_TID;
-// BAREQ AND MTBAREQ have the same subtype BAR, 802.11n BAR use compressed bitmap.
+/* BAREQ AND MTBAREQ have the same subtype BAR, 802.11n BAR use compressed bitmap. */
typedef struct PACKED _FRAME_BA_REQ {
FRAME_CONTROL FC;
USHORT Duration;
@@ -552,7 +552,7 @@ typedef struct PACKED _FRAME_MTBA_REQ {
BASEQ_CONTROL BAStartingSeq;
} FRAME_MTBA_REQ, *PFRAME_MTBA_REQ;
-// Compressed format is mandantory in HT STA
+/* Compressed format is mandantory in HT STA */
typedef struct PACKED _FRAME_MTBA {
FRAME_CONTROL FC;
USHORT Duration;
@@ -567,7 +567,7 @@ typedef struct PACKED _FRAME_PSMP_ACTION {
HEADER_802_11 Hdr;
UCHAR Category;
UCHAR Action;
- UCHAR Psmp; // 7.3.1.25
+ UCHAR Psmp; /* 7.3.1.25 */
} FRAME_PSMP_ACTION, *PFRAME_PSMP_ACTION;
typedef struct PACKED _FRAME_ACTION_HDR {
@@ -576,17 +576,17 @@ typedef struct PACKED _FRAME_ACTION_HDR {
UCHAR Action;
} FRAME_ACTION_HDR, *PFRAME_ACTION_HDR;
-//Action Frame
-//Action Frame Category:Spectrum, Action:Channel Switch. 7.3.2.20
+/*Action Frame */
+/*Action Frame Category:Spectrum, Action:Channel Switch. 7.3.2.20 */
typedef struct PACKED _CHAN_SWITCH_ANNOUNCE {
- UCHAR ElementID; // ID = IE_CHANNEL_SWITCH_ANNOUNCEMENT = 37
+ UCHAR ElementID; /* ID = IE_CHANNEL_SWITCH_ANNOUNCEMENT = 37 */
UCHAR Len;
CHA_SWITCH_ANNOUNCE_IE CSAnnounceIe;
} CHAN_SWITCH_ANNOUNCE, *PCHAN_SWITCH_ANNOUNCE;
-//802.11n : 7.3.2.20a
+/*802.11n : 7.3.2.20a */
typedef struct PACKED _SECOND_CHAN_OFFSET {
- UCHAR ElementID; // ID = IE_SECONDARY_CH_OFFSET = 62
+ UCHAR ElementID; /* ID = IE_SECONDARY_CH_OFFSET = 62 */
UCHAR Len;
SEC_CHA_OFFSET_IE SecChOffsetIe;
} SECOND_CHAN_OFFSET, *PSECOND_CHAN_OFFSET;
@@ -603,10 +603,10 @@ typedef struct PACKED _FRAME_ADDBA_REQ {
HEADER_802_11 Hdr;
UCHAR Category;
UCHAR Action;
- UCHAR Token; // 1
- BA_PARM BaParm; // 2 - 10
- USHORT TimeOutValue; // 0 - 0
- BASEQ_CONTROL BaStartSeq; // 0-0
+ UCHAR Token; /* 1 */
+ BA_PARM BaParm; /* 2 - 10 */
+ USHORT TimeOutValue; /* 0 - 0 */
+ BASEQ_CONTROL BaStartSeq; /* 0-0 */
} FRAME_ADDBA_REQ, *PFRAME_ADDBA_REQ;
typedef struct PACKED _FRAME_ADDBA_RSP {
@@ -615,7 +615,7 @@ typedef struct PACKED _FRAME_ADDBA_RSP {
UCHAR Action;
UCHAR Token;
USHORT StatusCode;
- BA_PARM BaParm; //0 - 2
+ BA_PARM BaParm; /*0 - 2 */
USHORT TimeOutValue;
} FRAME_ADDBA_RSP, *PFRAME_ADDBA_RSP;
@@ -627,7 +627,7 @@ typedef struct PACKED _FRAME_DELBA_REQ {
USHORT ReasonCode;
} FRAME_DELBA_REQ, *PFRAME_DELBA_REQ;
-//7.2.1.7
+/*7.2.1.7 */
typedef struct PACKED _FRAME_BAR {
FRAME_CONTROL FC;
USHORT Duration;
@@ -637,7 +637,7 @@ typedef struct PACKED _FRAME_BAR {
BASEQ_CONTROL StartingSeq;
} FRAME_BAR, *PFRAME_BAR;
-//7.2.1.7
+/*7.2.1.7 */
typedef struct PACKED _FRAME_BA {
FRAME_CONTROL FC;
USHORT Duration;
@@ -648,7 +648,7 @@ typedef struct PACKED _FRAME_BA {
UCHAR bitmask[8];
} FRAME_BA, *PFRAME_BA;
-// Radio Measuement Request Frame Format
+/* Radio Measuement Request Frame Format */
typedef struct PACKED _FRAME_RM_REQ_ACTION {
HEADER_802_11 Hdr;
UCHAR Category;
@@ -668,21 +668,21 @@ typedef struct PACKED {
} HT_EXT_CHANNEL_SWITCH_ANNOUNCEMENT_IE,
*PHT_EXT_CHANNEL_SWITCH_ANNOUNCEMENT_IE;
-//
-// _Limit must be the 2**n - 1
-// _SEQ1 , _SEQ2 must be within 0 ~ _Limit
-//
+/* */
+/* _Limit must be the 2**n - 1 */
+/* _SEQ1 , _SEQ2 must be within 0 ~ _Limit */
+/* */
#define SEQ_STEPONE(_SEQ1, _SEQ2, _Limit) ((_SEQ1 == ((_SEQ2+1) & _Limit)))
#define SEQ_SMALLER(_SEQ1, _SEQ2, _Limit) (((_SEQ1-_SEQ2) & ((_Limit+1)>>1)))
#define SEQ_LARGER(_SEQ1, _SEQ2, _Limit) ((_SEQ1 != _SEQ2) && !(((_SEQ1-_SEQ2) & ((_Limit+1)>>1))))
#define SEQ_WITHIN_WIN(_SEQ1, _SEQ2, _WIN, _Limit) (SEQ_LARGER(_SEQ1, _SEQ2, _Limit) && \
SEQ_SMALLER(_SEQ1, ((_SEQ2+_WIN+1)&_Limit), _Limit))
-//
-// Contention-free parameter (without ID and Length)
-//
+/* */
+/* Contention-free parameter (without ID and Length) */
+/* */
typedef struct PACKED {
- BOOLEAN bValid; // 1: variable contains valid value
+ BOOLEAN bValid; /* 1: variable contains valid value */
UCHAR CfpCount;
UCHAR CfpPeriod;
USHORT CfpMaxDuration;
@@ -690,39 +690,39 @@ typedef struct PACKED {
} CF_PARM, *PCF_PARM;
typedef struct _CIPHER_SUITE {
- NDIS_802_11_ENCRYPTION_STATUS PairCipher; // Unicast cipher 1, this one has more secured cipher suite
- NDIS_802_11_ENCRYPTION_STATUS PairCipherAux; // Unicast cipher 2 if AP announce two unicast cipher suite
- NDIS_802_11_ENCRYPTION_STATUS GroupCipher; // Group cipher
- USHORT RsnCapability; // RSN capability from beacon
- BOOLEAN bMixMode; // Indicate Pair & Group cipher might be different
+ NDIS_802_11_ENCRYPTION_STATUS PairCipher; /* Unicast cipher 1, this one has more secured cipher suite */
+ NDIS_802_11_ENCRYPTION_STATUS PairCipherAux; /* Unicast cipher 2 if AP announce two unicast cipher suite */
+ NDIS_802_11_ENCRYPTION_STATUS GroupCipher; /* Group cipher */
+ USHORT RsnCapability; /* RSN capability from beacon */
+ BOOLEAN bMixMode; /* Indicate Pair & Group cipher might be different */
} CIPHER_SUITE, *PCIPHER_SUITE;
-// EDCA configuration from AP's BEACON/ProbeRsp
+/* EDCA configuration from AP's BEACON/ProbeRsp */
typedef struct {
- BOOLEAN bValid; // 1: variable contains valid value
- BOOLEAN bAdd; // 1: variable contains valid value
+ BOOLEAN bValid; /* 1: variable contains valid value */
+ BOOLEAN bAdd; /* 1: variable contains valid value */
BOOLEAN bQAck;
BOOLEAN bQueueRequest;
BOOLEAN bTxopRequest;
BOOLEAN bAPSDCapable;
-// BOOLEAN bMoreDataAck;
+/* BOOLEAN bMoreDataAck; */
UCHAR EdcaUpdateCount;
- UCHAR Aifsn[4]; // 0:AC_BK, 1:AC_BE, 2:AC_VI, 3:AC_VO
+ UCHAR Aifsn[4]; /* 0:AC_BK, 1:AC_BE, 2:AC_VI, 3:AC_VO */
UCHAR Cwmin[4];
UCHAR Cwmax[4];
- USHORT Txop[4]; // in unit of 32-us
- BOOLEAN bACM[4]; // 1: Admission Control of AC_BK is mandattory
+ USHORT Txop[4]; /* in unit of 32-us */
+ BOOLEAN bACM[4]; /* 1: Admission Control of AC_BK is mandattory */
} EDCA_PARM, *PEDCA_PARM;
-// QBSS LOAD information from QAP's BEACON/ProbeRsp
+/* QBSS LOAD information from QAP's BEACON/ProbeRsp */
typedef struct {
- BOOLEAN bValid; // 1: variable contains valid value
+ BOOLEAN bValid; /* 1: variable contains valid value */
USHORT StaNum;
UCHAR ChannelUtilization;
- USHORT RemainingAdmissionControl; // in unit of 32-us
+ USHORT RemainingAdmissionControl; /* in unit of 32-us */
} QBSS_LOAD_PARM, *PQBSS_LOAD_PARM;
-// QBSS Info field in QSTA's assoc req
+/* QBSS Info field in QSTA's assoc req */
typedef struct PACKED {
UCHAR UAPSD_AC_VO:1;
UCHAR UAPSD_AC_VI:1;
@@ -733,21 +733,21 @@ typedef struct PACKED {
UCHAR Rsv2:1;
} QBSS_STA_INFO_PARM, *PQBSS_STA_INFO_PARM;
-// QBSS Info field in QAP's Beacon/ProbeRsp
+/* QBSS Info field in QAP's Beacon/ProbeRsp */
typedef struct PACKED {
UCHAR ParamSetCount:4;
UCHAR Rsv:3;
UCHAR UAPSD:1;
} QBSS_AP_INFO_PARM, *PQBSS_AP_INFO_PARM;
-// QOS Capability reported in QAP's BEACON/ProbeRsp
-// QOS Capability sent out in QSTA's AssociateReq/ReAssociateReq
+/* QOS Capability reported in QAP's BEACON/ProbeRsp */
+/* QOS Capability sent out in QSTA's AssociateReq/ReAssociateReq */
typedef struct {
- BOOLEAN bValid; // 1: variable contains valid value
+ BOOLEAN bValid; /* 1: variable contains valid value */
BOOLEAN bQAck;
BOOLEAN bQueueRequest;
BOOLEAN bTxopRequest;
-// BOOLEAN bMoreDataAck;
+/* BOOLEAN bMoreDataAck; */
UCHAR EdcaUpdateCount;
} QOS_CAPABILITY_PARM, *PQOS_CAPABILITY_PARM;
@@ -759,7 +759,7 @@ typedef struct {
typedef struct {
UCHAR Bssid[MAC_ADDR_LEN];
UCHAR Channel;
- UCHAR CentralChannel; //Store the wide-band central channel for 40MHz. .used in 40MHz AP. Or this is the same as Channel.
+ UCHAR CentralChannel; /*Store the wide-band central channel for 40MHz. .used in 40MHz AP. Or this is the same as Channel. */
UCHAR BssType;
USHORT AtimWin;
USHORT BeaconPeriod;
@@ -770,11 +770,11 @@ typedef struct {
UCHAR ExtRateLen;
HT_CAPABILITY_IE HtCapability;
UCHAR HtCapabilityLen;
- ADD_HT_INFO_IE AddHtInfo; // AP might use this additional ht info IE
+ ADD_HT_INFO_IE AddHtInfo; /* AP might use this additional ht info IE */
UCHAR AddHtInfoLen;
UCHAR NewExtChanOffset;
CHAR Rssi;
- UCHAR Privacy; // Indicate security function ON/OFF. Don't mess up with auth mode.
+ UCHAR Privacy; /* Indicate security function ON/OFF. Don't mess up with auth mode. */
UCHAR Hidden;
USHORT DtimPeriod;
@@ -787,30 +787,30 @@ typedef struct {
UCHAR SsidLen;
CHAR Ssid[MAX_LEN_OF_SSID];
- ULONG LastBeaconRxTime; // OS's timestamp
+ ULONG LastBeaconRxTime; /* OS's timestamp */
BOOLEAN bSES;
- // New for WPA2
- CIPHER_SUITE WPA; // AP announced WPA cipher suite
- CIPHER_SUITE WPA2; // AP announced WPA2 cipher suite
+ /* New for WPA2 */
+ CIPHER_SUITE WPA; /* AP announced WPA cipher suite */
+ CIPHER_SUITE WPA2; /* AP announced WPA2 cipher suite */
- // New for microsoft WPA support
+ /* New for microsoft WPA support */
NDIS_802_11_FIXED_IEs FixIEs;
- NDIS_802_11_AUTHENTICATION_MODE AuthModeAux; // Addition mode for WPA2 / WPA capable AP
+ NDIS_802_11_AUTHENTICATION_MODE AuthModeAux; /* Addition mode for WPA2 / WPA capable AP */
NDIS_802_11_AUTHENTICATION_MODE AuthMode;
- NDIS_802_11_WEP_STATUS WepStatus; // Unicast Encryption Algorithm extract from VAR_IE
- USHORT VarIELen; // Length of next VIE include EID & Length
+ NDIS_802_11_WEP_STATUS WepStatus; /* Unicast Encryption Algorithm extract from VAR_IE */
+ USHORT VarIELen; /* Length of next VIE include EID & Length */
UCHAR VarIEs[MAX_VIE_LEN];
- // CCX Ckip information
+ /* CCX Ckip information */
UCHAR CkipFlag;
- // CCX 2 TSF
- UCHAR PTSF[4]; // Parent TSF
- UCHAR TTSF[8]; // Target TSF
+ /* CCX 2 TSF */
+ UCHAR PTSF[4]; /* Parent TSF */
+ UCHAR TTSF[8]; /* Target TSF */
- // 802.11e d9, and WMM
+ /* 802.11e d9, and WMM */
EDCA_PARM EdcaParm;
QOS_CAPABILITY_PARM QosCapability;
QBSS_LOAD_PARM QbssLoad;
@@ -857,12 +857,12 @@ typedef struct _STATE_MACHINE {
STATE_MACHINE_FUNC *TransFunc;
} STATE_MACHINE, *PSTATE_MACHINE;
-// MLME AUX data structure that hold temporarliy settings during a connection attempt.
-// Once this attemp succeeds, all settings will be copy to pAd->StaActive.
-// A connection attempt (user set OID, roaming, CCX fast roaming,..) consists of
-// several steps (JOIN, AUTH, ASSOC or REASSOC) and may fail at any step. We purposely
-// separate this under-trial settings away from pAd->StaActive so that once
-// this new attempt failed, driver can auto-recover back to the active settings.
+/* MLME AUX data structure that hold temporarliy settings during a connection attempt. */
+/* Once this attemp succeeds, all settings will be copy to pAd->StaActive. */
+/* A connection attempt (user set OID, roaming, CCX fast roaming,..) consists of */
+/* several steps (JOIN, AUTH, ASSOC or REASSOC) and may fail at any step. We purposely */
+/* separate this under-trial settings away from pAd->StaActive so that once */
+/* this new attempt failed, driver can auto-recover back to the active settings. */
typedef struct _MLME_AUX {
UCHAR BssType;
UCHAR Ssid[MAX_LEN_OF_SSID];
@@ -881,28 +881,28 @@ typedef struct _MLME_AUX {
USHORT CfpPeriod;
USHORT AtimWin;
- // Copy supported rate from desired AP's beacon. We are trying to match
- // AP's supported and extended rate settings.
+ /* Copy supported rate from desired AP's beacon. We are trying to match */
+ /* AP's supported and extended rate settings. */
UCHAR SupRate[MAX_LEN_OF_SUPPORTED_RATES];
UCHAR ExtRate[MAX_LEN_OF_SUPPORTED_RATES];
UCHAR SupRateLen;
UCHAR ExtRateLen;
HT_CAPABILITY_IE HtCapability;
UCHAR HtCapabilityLen;
- ADD_HT_INFO_IE AddHtInfo; // AP might use this additional ht info IE
+ ADD_HT_INFO_IE AddHtInfo; /* AP might use this additional ht info IE */
UCHAR NewExtChannelOffset;
- //RT_HT_CAPABILITY SupportedHtPhy;
+ /*RT_HT_CAPABILITY SupportedHtPhy; */
- // new for QOS
- QOS_CAPABILITY_PARM APQosCapability; // QOS capability of the current associated AP
- EDCA_PARM APEdcaParm; // EDCA parameters of the current associated AP
- QBSS_LOAD_PARM APQbssLoad; // QBSS load of the current associated AP
+ /* new for QOS */
+ QOS_CAPABILITY_PARM APQosCapability; /* QOS capability of the current associated AP */
+ EDCA_PARM APEdcaParm; /* EDCA parameters of the current associated AP */
+ QBSS_LOAD_PARM APQbssLoad; /* QBSS load of the current associated AP */
- // new to keep Ralink specific feature
+ /* new to keep Ralink specific feature */
ULONG APRalinkIe;
- BSS_TABLE SsidBssTab; // AP list for the same SSID
- BSS_TABLE RoamTab; // AP list eligible for roaming
+ BSS_TABLE SsidBssTab; /* AP list for the same SSID */
+ BSS_TABLE RoamTab; /* AP list eligible for roaming */
ULONG BssIdx;
ULONG RoamIdx;
@@ -914,7 +914,7 @@ typedef struct _MLME_AUX {
} MLME_AUX, *PMLME_AUX;
typedef struct _MLME_ADDBA_REQ_STRUCT {
- UCHAR Wcid; //
+ UCHAR Wcid; /* */
UCHAR pAddr[MAC_ADDR_LEN];
UCHAR BaBufSize;
USHORT TimeOutValue;
@@ -924,13 +924,13 @@ typedef struct _MLME_ADDBA_REQ_STRUCT {
} MLME_ADDBA_REQ_STRUCT, *PMLME_ADDBA_REQ_STRUCT;
typedef struct _MLME_DELBA_REQ_STRUCT {
- UCHAR Wcid; //
+ UCHAR Wcid; /* */
UCHAR Addr[MAC_ADDR_LEN];
UCHAR TID;
UCHAR Initiator;
} MLME_DELBA_REQ_STRUCT, *PMLME_DELBA_REQ_STRUCT;
-// assoc struct is equal to reassoc
+/* assoc struct is equal to reassoc */
typedef struct _MLME_ASSOC_REQ_STRUCT {
UCHAR Addr[MAC_ADDR_LEN];
USHORT CapabilityInfo;
@@ -991,62 +991,62 @@ typedef struct PACKED _RTMP_TX_RATE_SWITCH {
UCHAR TrainDown;
} RRTMP_TX_RATE_SWITCH, *PRTMP_TX_RATE_SWITCH;
-// ========================== AP mlme.h ===============================
-#define TBTT_PRELOAD_TIME 384 // usec. LomgPreamble + 24-byte at 1Mbps
+/* ========================== AP mlme.h =============================== */
+#define TBTT_PRELOAD_TIME 384 /* usec. LomgPreamble + 24-byte at 1Mbps */
#define DEFAULT_DTIM_PERIOD 1
-#define MAC_TABLE_AGEOUT_TIME 300 // unit: sec
-#define MAC_TABLE_ASSOC_TIMEOUT 5 // unit: sec
+#define MAC_TABLE_AGEOUT_TIME 300 /* unit: sec */
+#define MAC_TABLE_ASSOC_TIMEOUT 5 /* unit: sec */
#define MAC_TABLE_FULL(Tab) ((Tab).size == MAX_LEN_OF_MAC_TABLE)
-// AP shall drop the sta if contine Tx fail count reach it.
-#define MAC_ENTRY_LIFE_CHECK_CNT 20 // packet cnt.
+/* AP shall drop the sta if contine Tx fail count reach it. */
+#define MAC_ENTRY_LIFE_CHECK_CNT 20 /* packet cnt. */
-// Value domain of pMacEntry->Sst
+/* Value domain of pMacEntry->Sst */
typedef enum _Sst {
- SST_NOT_AUTH, // 0: equivalent to IEEE 802.11/1999 state 1
- SST_AUTH, // 1: equivalent to IEEE 802.11/1999 state 2
- SST_ASSOC // 2: equivalent to IEEE 802.11/1999 state 3
+ SST_NOT_AUTH, /* 0: equivalent to IEEE 802.11/1999 state 1 */
+ SST_AUTH, /* 1: equivalent to IEEE 802.11/1999 state 2 */
+ SST_ASSOC /* 2: equivalent to IEEE 802.11/1999 state 3 */
} SST;
-// value domain of pMacEntry->AuthState
+/* value domain of pMacEntry->AuthState */
typedef enum _AuthState {
AS_NOT_AUTH,
- AS_AUTH_OPEN, // STA has been authenticated using OPEN SYSTEM
- AS_AUTH_KEY, // STA has been authenticated using SHARED KEY
- AS_AUTHENTICATING // STA is waiting for AUTH seq#3 using SHARED KEY
+ AS_AUTH_OPEN, /* STA has been authenticated using OPEN SYSTEM */
+ AS_AUTH_KEY, /* STA has been authenticated using SHARED KEY */
+ AS_AUTHENTICATING /* STA is waiting for AUTH seq#3 using SHARED KEY */
} AUTH_STATE;
-//for-wpa value domain of pMacEntry->WpaState 802.1i D3 p.114
+/*for-wpa value domain of pMacEntry->WpaState 802.1i D3 p.114 */
typedef enum _ApWpaState {
- AS_NOTUSE, // 0
- AS_DISCONNECT, // 1
- AS_DISCONNECTED, // 2
- AS_INITIALIZE, // 3
- AS_AUTHENTICATION, // 4
- AS_AUTHENTICATION2, // 5
- AS_INITPMK, // 6
- AS_INITPSK, // 7
- AS_PTKSTART, // 8
- AS_PTKINIT_NEGOTIATING, // 9
- AS_PTKINITDONE, // 10
- AS_UPDATEKEYS, // 11
- AS_INTEGRITY_FAILURE, // 12
- AS_KEYUPDATE, // 13
+ AS_NOTUSE, /* 0 */
+ AS_DISCONNECT, /* 1 */
+ AS_DISCONNECTED, /* 2 */
+ AS_INITIALIZE, /* 3 */
+ AS_AUTHENTICATION, /* 4 */
+ AS_AUTHENTICATION2, /* 5 */
+ AS_INITPMK, /* 6 */
+ AS_INITPSK, /* 7 */
+ AS_PTKSTART, /* 8 */
+ AS_PTKINIT_NEGOTIATING, /* 9 */
+ AS_PTKINITDONE, /* 10 */
+ AS_UPDATEKEYS, /* 11 */
+ AS_INTEGRITY_FAILURE, /* 12 */
+ AS_KEYUPDATE, /* 13 */
} AP_WPA_STATE;
-// for-wpa value domain of pMacEntry->WpaState 802.1i D3 p.114
+/* for-wpa value domain of pMacEntry->WpaState 802.1i D3 p.114 */
typedef enum _GTKState {
REKEY_NEGOTIATING,
REKEY_ESTABLISHED,
KEYERROR,
} GTK_STATE;
-// for-wpa value domain of pMacEntry->WpaState 802.1i D3 p.114
+/* for-wpa value domain of pMacEntry->WpaState 802.1i D3 p.114 */
typedef enum _WpaGTKState {
SETKEYS,
SETKEYS_DONE,
} WPA_GTK_STATE;
-// ====================== end of AP mlme.h ============================
+/* ====================== end of AP mlme.h ============================ */
-#endif // MLME_H__
+#endif /* MLME_H__ */
diff --git a/drivers/staging/rt2860/oid.h b/drivers/staging/rt2860/oid.h
index 54fac1c..ba72141 100644
--- a/drivers/staging/rt2860/oid.h
+++ b/drivers/staging/rt2860/oid.h
@@ -37,7 +37,7 @@
#ifndef _OID_H_
#define _OID_H_
-//#include <linux/wireless.h>
+/*#include <linux/wireless.h> */
#ifndef TRUE
#define TRUE 1
@@ -45,9 +45,9 @@
#ifndef FALSE
#define FALSE 0
#endif
-//
-// IEEE 802.11 Structures and definitions
-//
+/* */
+/* IEEE 802.11 Structures and definitions */
+/* */
#define MAX_TX_POWER_LEVEL 100 /* mW */
#define MAX_RSSI_TRIGGER -10 /* dBm */
#define MIN_RSSI_TRIGGER -200 /* dBm */
@@ -55,19 +55,19 @@
#define MIN_FRAG_THRESHOLD 256 /* byte count */
#define MAX_RTS_THRESHOLD 2347 /* byte count */
-// new types for Media Specific Indications
-// Extension channel offset
+/* new types for Media Specific Indications */
+/* Extension channel offset */
#define EXTCHA_NONE 0
#define EXTCHA_ABOVE 0x1
#define EXTCHA_BELOW 0x3
-// BW
+/* BW */
#define BAND_WIDTH_20 0
#define BAND_WIDTH_40 1
#define BAND_WIDTH_BOTH 2
-#define BAND_WIDTH_10 3 // 802.11j has 10MHz. This definition is for internal usage. doesn't fill in the IE or other field.
-// SHORTGI
-#define GAP_INTERVAL_400 1 // only support in HT mode
+#define BAND_WIDTH_10 3 /* 802.11j has 10MHz. This definition is for internal usage. doesn't fill in the IE or other field. */
+/* SHORTGI */
+#define GAP_INTERVAL_400 1 /* only support in HT mode */
#define GAP_INTERVAL_800 0
#define GAP_INTERVAL_BOTH 2
@@ -78,12 +78,12 @@
#define NDIS_802_11_LENGTH_RATES 8
#define NDIS_802_11_LENGTH_RATES_EX 16
#define MAC_ADDR_LENGTH 6
-//#define MAX_NUM_OF_CHS 49 // 14 channels @2.4G + 12 at UNII + 4 @MMAC + 11 @HiperLAN2 + 7 @Japan + 1 as NULL terminationc
-#define MAX_NUM_OF_CHS 54 // 14 channels @2.4G + 12 at UNII(lower/middle) + 16 at HiperLAN2 + 11 at UNII(upper) + 0 @Japan + 1 as NULL termination
-#define MAX_NUMBER_OF_EVENT 10 // entry # in EVENT table
-#define MAX_NUMBER_OF_MAC 32 // if MAX_MBSSID_NUM is 8, this value can't be larger than 211
+/*#define MAX_NUM_OF_CHS 49 // 14 channels @2.4G + 12 at UNII + 4 @MMAC + 11 @HiperLAN2 + 7 @Japan + 1 as NULL terminationc */
+#define MAX_NUM_OF_CHS 54 /* 14 channels @2.4G + 12 at UNII(lower/middle) + 16 at HiperLAN2 + 11 at UNII(upper) + 0 @Japan + 1 as NULL termination */
+#define MAX_NUMBER_OF_EVENT 10 /* entry # in EVENT table */
+#define MAX_NUMBER_OF_MAC 32 /* if MAX_MBSSID_NUM is 8, this value can't be larger than 211 */
#define MAX_NUMBER_OF_ACL 64
-#define MAX_LENGTH_OF_SUPPORT_RATES 12 // 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54
+#define MAX_LENGTH_OF_SUPPORT_RATES 12 /* 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54 */
#define MAX_NUMBER_OF_DLS_ENTRY 4
#define RT_QUERY_SIGNAL_CONTEXT 0x0402
@@ -91,9 +91,9 @@
#define RT_SET_APD_PID 0x0405
#define RT_SET_DEL_MAC_ENTRY 0x0406
#define RT_QUERY_EVENT_TABLE 0x0407
-//
-// IEEE 802.11 OIDs
-//
+/* */
+/* IEEE 802.11 OIDs */
+/* */
#define OID_GET_SET_TOGGLE 0x8000
#define OID_GET_SET_FROM_UI 0x4000
@@ -119,7 +119,7 @@
#define RT_OID_802_11_QUERY_LAST_RX_RATE 0x0613
#define RT_OID_802_11_TX_POWER_LEVEL_1 0x0614
#define RT_OID_802_11_QUERY_PIDVID 0x0615
-//for WPA_SUPPLICANT_SUPPORT
+/*for WPA_SUPPLICANT_SUPPORT */
#define OID_SET_COUNTERMEASURES 0x0616
#define RT_OID_WPA_SUPPLICANT_SUPPORT 0x0621
#define RT_OID_WE_VERSION_COMPILED 0x0622
@@ -132,7 +132,7 @@ typedef enum _NDIS_802_11_STATUS_TYPE {
Ndis802_11StatusType_Authentication,
Ndis802_11StatusType_MediaStreamMode,
Ndis802_11StatusType_PMKID_CandidateList,
- Ndis802_11StatusTypeMax // not a real type, defined as an upper bound
+ Ndis802_11StatusTypeMax /* not a real type, defined as an upper bound */
} NDIS_802_11_STATUS_TYPE, *PNDIS_802_11_STATUS_TYPE;
typedef UCHAR NDIS_802_11_MAC_ADDRESS[6];
@@ -141,7 +141,7 @@ typedef struct _NDIS_802_11_STATUS_INDICATION {
NDIS_802_11_STATUS_TYPE StatusType;
} NDIS_802_11_STATUS_INDICATION, *PNDIS_802_11_STATUS_INDICATION;
-// mask for authentication/integrity fields
+/* mask for authentication/integrity fields */
#define NDIS_802_11_AUTH_REQUEST_AUTH_FIELDS 0x0f
#define NDIS_802_11_AUTH_REQUEST_REAUTH 0x01
@@ -150,27 +150,27 @@ typedef struct _NDIS_802_11_STATUS_INDICATION {
#define NDIS_802_11_AUTH_REQUEST_GROUP_ERROR 0x0E
typedef struct _NDIS_802_11_AUTHENTICATION_REQUEST {
- ULONG Length; // Length of structure
+ ULONG Length; /* Length of structure */
NDIS_802_11_MAC_ADDRESS Bssid;
ULONG Flags;
} NDIS_802_11_AUTHENTICATION_REQUEST, *PNDIS_802_11_AUTHENTICATION_REQUEST;
-//Added new types for PMKID Candidate lists.
+/*Added new types for PMKID Candidate lists. */
typedef struct _PMKID_CANDIDATE {
NDIS_802_11_MAC_ADDRESS BSSID;
ULONG Flags;
} PMKID_CANDIDATE, *PPMKID_CANDIDATE;
typedef struct _NDIS_802_11_PMKID_CANDIDATE_LIST {
- ULONG Version; // Version of the structure
- ULONG NumCandidates; // No. of pmkid candidates
+ ULONG Version; /* Version of the structure */
+ ULONG NumCandidates; /* No. of pmkid candidates */
PMKID_CANDIDATE CandidateList[1];
} NDIS_802_11_PMKID_CANDIDATE_LIST, *PNDIS_802_11_PMKID_CANDIDATE_LIST;
-//Flags for PMKID Candidate list structure
+/*Flags for PMKID Candidate list structure */
#define NDIS_802_11_PMKID_CANDIDATE_PREAUTH_ENABLED 0x01
-// Added new types for OFDM 5G and 2.4G
+/* Added new types for OFDM 5G and 2.4G */
typedef enum _NDIS_802_11_NETWORK_TYPE {
Ndis802_11FH,
Ndis802_11DS,
@@ -179,11 +179,11 @@ typedef enum _NDIS_802_11_NETWORK_TYPE {
Ndis802_11Automode,
Ndis802_11OFDM5_N,
Ndis802_11OFDM24_N,
- Ndis802_11NetworkTypeMax // not a real type, defined as an upper bound
+ Ndis802_11NetworkTypeMax /* not a real type, defined as an upper bound */
} NDIS_802_11_NETWORK_TYPE, *PNDIS_802_11_NETWORK_TYPE;
typedef struct _NDIS_802_11_NETWORK_TYPE_LIST {
- UINT NumberOfItems; // in list below, at least 1
+ UINT NumberOfItems; /* in list below, at least 1 */
NDIS_802_11_NETWORK_TYPE NetworkType[1];
} NDIS_802_11_NETWORK_TYPE_LIST, *PNDIS_802_11_NETWORK_TYPE_LIST;
@@ -192,33 +192,33 @@ typedef enum _NDIS_802_11_POWER_MODE {
Ndis802_11PowerModeMAX_PSP,
Ndis802_11PowerModeFast_PSP,
Ndis802_11PowerModeLegacy_PSP,
- Ndis802_11PowerModeMax // not a real mode, defined as an upper bound
+ Ndis802_11PowerModeMax /* not a real mode, defined as an upper bound */
} NDIS_802_11_POWER_MODE, *PNDIS_802_11_POWER_MODE;
-typedef ULONG NDIS_802_11_TX_POWER_LEVEL; // in milliwatts
+typedef ULONG NDIS_802_11_TX_POWER_LEVEL; /* in milliwatts */
-//
-// Received Signal Strength Indication
-//
-typedef LONG NDIS_802_11_RSSI; // in dBm
+/* */
+/* Received Signal Strength Indication */
+/* */
+typedef LONG NDIS_802_11_RSSI; /* in dBm */
typedef struct _NDIS_802_11_CONFIGURATION_FH {
- ULONG Length; // Length of structure
- ULONG HopPattern; // As defined by 802.11, MSB set
- ULONG HopSet; // to one if non-802.11
- ULONG DwellTime; // units are Kusec
+ ULONG Length; /* Length of structure */
+ ULONG HopPattern; /* As defined by 802.11, MSB set */
+ ULONG HopSet; /* to one if non-802.11 */
+ ULONG DwellTime; /* units are Kusec */
} NDIS_802_11_CONFIGURATION_FH, *PNDIS_802_11_CONFIGURATION_FH;
typedef struct _NDIS_802_11_CONFIGURATION {
- ULONG Length; // Length of structure
- ULONG BeaconPeriod; // units are Kusec
- ULONG ATIMWindow; // units are Kusec
- ULONG DSConfig; // Frequency, units are kHz
+ ULONG Length; /* Length of structure */
+ ULONG BeaconPeriod; /* units are Kusec */
+ ULONG ATIMWindow; /* units are Kusec */
+ ULONG DSConfig; /* Frequency, units are kHz */
NDIS_802_11_CONFIGURATION_FH FHConfig;
} NDIS_802_11_CONFIGURATION, *PNDIS_802_11_CONFIGURATION;
typedef struct _NDIS_802_11_STATISTICS {
- ULONG Length; // Length of structure
+ ULONG Length; /* Length of structure */
LARGE_INTEGER TransmittedFragmentCount;
LARGE_INTEGER MulticastTransmittedFrameCount;
LARGE_INTEGER FailedCount;
@@ -245,7 +245,7 @@ typedef struct _NDIS_802_11_STATISTICS {
typedef ULONG NDIS_802_11_KEY_INDEX;
typedef ULONGLONG NDIS_802_11_KEY_RSC;
-#define MAX_RADIUS_SRV_NUM 2 // 802.1x failover number
+#define MAX_RADIUS_SRV_NUM 2 /* 802.1x failover number */
typedef struct PACKED _RADIUS_SRV_INFO {
UINT32 radius_ip;
@@ -257,16 +257,16 @@ typedef struct PACKED _RADIUS_SRV_INFO {
typedef struct PACKED _RADIUS_KEY_INFO {
UCHAR radius_srv_num;
RADIUS_SRV_INFO radius_srv_info[MAX_RADIUS_SRV_NUM];
- UCHAR ieee8021xWEP; // dynamic WEP
+ UCHAR ieee8021xWEP; /* dynamic WEP */
UCHAR key_index;
- UCHAR key_length; // length of key in bytes
+ UCHAR key_length; /* length of key in bytes */
UCHAR key_material[13];
} RADIUS_KEY_INFO, *PRADIUS_KEY_INFO;
-// It's used by 802.1x daemon to require relative configuration
+/* It's used by 802.1x daemon to require relative configuration */
typedef struct PACKED _RADIUS_CONF {
- UINT32 Length; // Length of this structure
- UCHAR mbss_num; // indicate multiple BSS number
+ UINT32 Length; /* Length of this structure */
+ UCHAR mbss_num; /* indicate multiple BSS number */
UINT32 own_ip_addr;
UINT32 retry_interval;
UINT32 session_timeout_interval;
@@ -277,34 +277,34 @@ typedef struct PACKED _RADIUS_CONF {
RADIUS_KEY_INFO RadiusInfo[8];
} RADIUS_CONF, *PRADIUS_CONF;
-// Key mapping keys require a BSSID
+/* Key mapping keys require a BSSID */
typedef struct _NDIS_802_11_KEY {
- UINT Length; // Length of this structure
+ UINT Length; /* Length of this structure */
UINT KeyIndex;
- UINT KeyLength; // length of key in bytes
+ UINT KeyLength; /* length of key in bytes */
NDIS_802_11_MAC_ADDRESS BSSID;
NDIS_802_11_KEY_RSC KeyRSC;
- UCHAR KeyMaterial[1]; // variable length depending on above field
+ UCHAR KeyMaterial[1]; /* variable length depending on above field */
} NDIS_802_11_KEY, *PNDIS_802_11_KEY;
typedef struct _NDIS_802_11_PASSPHRASE {
- UINT KeyLength; // length of key in bytes
+ UINT KeyLength; /* length of key in bytes */
NDIS_802_11_MAC_ADDRESS BSSID;
- UCHAR KeyMaterial[1]; // variable length depending on above field
+ UCHAR KeyMaterial[1]; /* variable length depending on above field */
} NDIS_802_11_PASSPHRASE, *PNDIS_802_11_PASSPHRASE;
typedef struct _NDIS_802_11_REMOVE_KEY {
- UINT Length; // Length of this structure
+ UINT Length; /* Length of this structure */
UINT KeyIndex;
NDIS_802_11_MAC_ADDRESS BSSID;
} NDIS_802_11_REMOVE_KEY, *PNDIS_802_11_REMOVE_KEY;
typedef struct _NDIS_802_11_WEP {
- UINT Length; // Length of this structure
- UINT KeyIndex; // 0 is the per-client key, 1-N are the
- // global keys
- UINT KeyLength; // length of key in bytes
- UCHAR KeyMaterial[1]; // variable length depending on above field
+ UINT Length; /* Length of this structure */
+ UINT KeyIndex; /* 0 is the per-client key, 1-N are the */
+ /* global keys */
+ UINT KeyLength; /* length of key in bytes */
+ UCHAR KeyMaterial[1]; /* variable length depending on above field */
} NDIS_802_11_WEP, *PNDIS_802_11_WEP;
typedef enum _NDIS_802_11_NETWORK_INFRASTRUCTURE {
@@ -312,10 +312,10 @@ typedef enum _NDIS_802_11_NETWORK_INFRASTRUCTURE {
Ndis802_11Infrastructure,
Ndis802_11AutoUnknown,
Ndis802_11Monitor,
- Ndis802_11InfrastructureMax // Not a real value, defined as upper bound
+ Ndis802_11InfrastructureMax /* Not a real value, defined as upper bound */
} NDIS_802_11_NETWORK_INFRASTRUCTURE, *PNDIS_802_11_NETWORK_INFRASTRUCTURE;
-// Add new authentication modes
+/* Add new authentication modes */
typedef enum _NDIS_802_11_AUTHENTICATION_MODE {
Ndis802_11AuthModeOpen,
Ndis802_11AuthModeShared,
@@ -327,25 +327,25 @@ typedef enum _NDIS_802_11_AUTHENTICATION_MODE {
Ndis802_11AuthModeWPA2PSK,
Ndis802_11AuthModeWPA1WPA2,
Ndis802_11AuthModeWPA1PSKWPA2PSK,
- Ndis802_11AuthModeMax // Not a real mode, defined as upper bound
+ Ndis802_11AuthModeMax /* Not a real mode, defined as upper bound */
} NDIS_802_11_AUTHENTICATION_MODE, *PNDIS_802_11_AUTHENTICATION_MODE;
-typedef UCHAR NDIS_802_11_RATES[NDIS_802_11_LENGTH_RATES]; // Set of 8 data rates
-typedef UCHAR NDIS_802_11_RATES_EX[NDIS_802_11_LENGTH_RATES_EX]; // Set of 16 data rates
+typedef UCHAR NDIS_802_11_RATES[NDIS_802_11_LENGTH_RATES]; /* Set of 8 data rates */
+typedef UCHAR NDIS_802_11_RATES_EX[NDIS_802_11_LENGTH_RATES_EX]; /* Set of 16 data rates */
typedef struct PACKED _NDIS_802_11_SSID {
- UINT SsidLength; // length of SSID field below, in bytes;
- // this can be zero.
- UCHAR Ssid[NDIS_802_11_LENGTH_SSID]; // SSID information field
+ UINT SsidLength; /* length of SSID field below, in bytes; */
+ /* this can be zero. */
+ UCHAR Ssid[NDIS_802_11_LENGTH_SSID]; /* SSID information field */
} NDIS_802_11_SSID, *PNDIS_802_11_SSID;
typedef struct PACKED _NDIS_WLAN_BSSID {
- ULONG Length; // Length of this structure
- NDIS_802_11_MAC_ADDRESS MacAddress; // BSSID
+ ULONG Length; /* Length of this structure */
+ NDIS_802_11_MAC_ADDRESS MacAddress; /* BSSID */
UCHAR Reserved[2];
- NDIS_802_11_SSID Ssid; // SSID
- ULONG Privacy; // WEP encryption requirement
- NDIS_802_11_RSSI Rssi; // receive signal strength in dBm
+ NDIS_802_11_SSID Ssid; /* SSID */
+ ULONG Privacy; /* WEP encryption requirement */
+ NDIS_802_11_RSSI Rssi; /* receive signal strength in dBm */
NDIS_802_11_NETWORK_TYPE NetworkTypeInUse;
NDIS_802_11_CONFIGURATION Configuration;
NDIS_802_11_NETWORK_INFRASTRUCTURE InfrastructureMode;
@@ -353,19 +353,19 @@ typedef struct PACKED _NDIS_WLAN_BSSID {
} NDIS_WLAN_BSSID, *PNDIS_WLAN_BSSID;
typedef struct PACKED _NDIS_802_11_BSSID_LIST {
- UINT NumberOfItems; // in list below, at least 1
+ UINT NumberOfItems; /* in list below, at least 1 */
NDIS_WLAN_BSSID Bssid[1];
} NDIS_802_11_BSSID_LIST, *PNDIS_802_11_BSSID_LIST;
-// Added Capabilities, IELength and IEs for each BSSID
+/* Added Capabilities, IELength and IEs for each BSSID */
typedef struct PACKED _NDIS_WLAN_BSSID_EX {
- ULONG Length; // Length of this structure
- NDIS_802_11_MAC_ADDRESS MacAddress; // BSSID
+ ULONG Length; /* Length of this structure */
+ NDIS_802_11_MAC_ADDRESS MacAddress; /* BSSID */
UCHAR Reserved[2];
- NDIS_802_11_SSID Ssid; // SSID
- UINT Privacy; // WEP encryption requirement
- NDIS_802_11_RSSI Rssi; // receive signal
- // strength in dBm
+ NDIS_802_11_SSID Ssid; /* SSID */
+ UINT Privacy; /* WEP encryption requirement */
+ NDIS_802_11_RSSI Rssi; /* receive signal */
+ /* strength in dBm */
NDIS_802_11_NETWORK_TYPE NetworkTypeInUse;
NDIS_802_11_CONFIGURATION Configuration;
NDIS_802_11_NETWORK_INFRASTRUCTURE InfrastructureMode;
@@ -375,7 +375,7 @@ typedef struct PACKED _NDIS_WLAN_BSSID_EX {
} NDIS_WLAN_BSSID_EX, *PNDIS_WLAN_BSSID_EX;
typedef struct PACKED _NDIS_802_11_BSSID_LIST_EX {
- UINT NumberOfItems; // in list below, at least 1
+ UINT NumberOfItems; /* in list below, at least 1 */
NDIS_WLAN_BSSID_EX Bssid[1];
} NDIS_802_11_BSSID_LIST_EX, *PNDIS_802_11_BSSID_LIST_EX;
@@ -387,7 +387,7 @@ typedef struct PACKED _NDIS_802_11_FIXED_IEs {
typedef struct _NDIS_802_11_VARIABLE_IEs {
UCHAR ElementID;
- UCHAR Length; // Number of bytes in data field
+ UCHAR Length; /* Number of bytes in data field */
UCHAR data[1];
} NDIS_802_11_VARIABLE_IEs, *PNDIS_802_11_VARIABLE_IEs;
@@ -402,8 +402,8 @@ typedef enum _NDIS_802_11_PRIVACY_FILTER {
Ndis802_11PrivFilter8021xWEP
} NDIS_802_11_PRIVACY_FILTER, *PNDIS_802_11_PRIVACY_FILTER;
-// Added new encryption types
-// Also aliased typedef to new name
+/* Added new encryption types */
+/* Also aliased typedef to new name */
typedef enum _NDIS_802_11_WEP_STATUS {
Ndis802_11WEPEnabled,
Ndis802_11Encryption1Enabled = Ndis802_11WEPEnabled,
@@ -417,7 +417,7 @@ typedef enum _NDIS_802_11_WEP_STATUS {
Ndis802_11Encryption2KeyAbsent,
Ndis802_11Encryption3Enabled,
Ndis802_11Encryption3KeyAbsent,
- Ndis802_11Encryption4Enabled, // TKIP or AES mix
+ Ndis802_11Encryption4Enabled, /* TKIP or AES mix */
Ndis802_11Encryption4KeyAbsent,
Ndis802_11GroupWEP40Enabled,
Ndis802_11GroupWEP104Enabled,
@@ -465,13 +465,13 @@ typedef struct _NDIS_802_11_AUTHENTICATION_EVENT {
NDIS_802_11_AUTHENTICATION_REQUEST Request[1];
} NDIS_802_11_AUTHENTICATION_EVENT, *PNDIS_802_11_AUTHENTICATION_EVENT;
-// 802.11 Media stream constraints, associated with OID_802_11_MEDIA_STREAM_MODE
+/* 802.11 Media stream constraints, associated with OID_802_11_MEDIA_STREAM_MODE */
typedef enum _NDIS_802_11_MEDIA_STREAM_MODE {
Ndis802_11MediaStreamOff,
Ndis802_11MediaStreamOn,
} NDIS_802_11_MEDIA_STREAM_MODE, *PNDIS_802_11_MEDIA_STREAM_MODE;
-// PMKID Structures
+/* PMKID Structures */
typedef UCHAR NDIS_802_11_PMKID_VALUE[16];
typedef struct _BSSID_INFO {
@@ -500,14 +500,14 @@ typedef struct _NDIS_802_11_CAPABILITY {
AuthenticationEncryptionSupported[1];
} NDIS_802_11_CAPABILITY, *PNDIS_802_11_CAPABILITY;
-#define RT_PRIV_IOCTL (SIOCIWFIRSTPRIV + 0x01) // Sync. with AP for wsc upnp daemon
+#define RT_PRIV_IOCTL (SIOCIWFIRSTPRIV + 0x01) /* Sync. with AP for wsc upnp daemon */
#define RTPRIV_IOCTL_SET (SIOCIWFIRSTPRIV + 0x02)
#define RTPRIV_IOCTL_STATISTICS (SIOCIWFIRSTPRIV + 0x09)
#define RTPRIV_IOCTL_ADD_PMKID_CACHE (SIOCIWFIRSTPRIV + 0x0A)
#define RTPRIV_IOCTL_RADIUS_DATA (SIOCIWFIRSTPRIV + 0x0C)
#define RTPRIV_IOCTL_GSITESURVEY (SIOCIWFIRSTPRIV + 0x0D)
-#define RT_PRIV_IOCTL_EXT (SIOCIWFIRSTPRIV + 0x0E) // Sync. with RT61 (for wpa_supplicant)
+#define RT_PRIV_IOCTL_EXT (SIOCIWFIRSTPRIV + 0x0E) /* Sync. with RT61 (for wpa_supplicant) */
#define RTPRIV_IOCTL_GET_MAC_TABLE (SIOCIWFIRSTPRIV + 0x0F)
#define RTPRIV_IOCTL_SHOW (SIOCIWFIRSTPRIV + 0x11)
@@ -519,7 +519,7 @@ enum {
#ifdef RTMP_MAC_USB
SHOW_RXBULK_INFO = 8,
SHOW_TXBULK_INFO = 9,
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
RAIO_OFF = 10,
RAIO_ON = 11,
SHOW_CFG_VALUE = 20,
@@ -531,19 +531,19 @@ enum {
#define OID_802_11_GET_COUNTRY_CODE 0x0716
#define OID_802_11_GET_CHANNEL_GEOGRAPHY 0x0717
-#define RT_OID_WSC_SET_PASSPHRASE 0x0740 // passphrase for wpa(2)-psk
+#define RT_OID_WSC_SET_PASSPHRASE 0x0740 /* passphrase for wpa(2)-psk */
#define RT_OID_WSC_DRIVER_AUTO_CONNECT 0x0741
#define RT_OID_WSC_QUERY_DEFAULT_PROFILE 0x0742
#define RT_OID_WSC_SET_CONN_BY_PROFILE_INDEX 0x0743
#define RT_OID_WSC_SET_ACTION 0x0744
#define RT_OID_WSC_SET_SSID 0x0745
#define RT_OID_WSC_SET_PIN_CODE 0x0746
-#define RT_OID_WSC_SET_MODE 0x0747 // PIN or PBC
-#define RT_OID_WSC_SET_CONF_MODE 0x0748 // Enrollee or Registrar
+#define RT_OID_WSC_SET_MODE 0x0747 /* PIN or PBC */
+#define RT_OID_WSC_SET_CONF_MODE 0x0748 /* Enrollee or Registrar */
#define RT_OID_WSC_SET_PROFILE 0x0749
#define RT_OID_WSC_CONFIG_STATUS 0x074F
#define RT_OID_802_11_WSC_QUERY_PROFILE 0x0750
-// for consistency with RT61
+/* for consistency with RT61 */
#define RT_OID_WSC_QUERY_STATUS 0x0751
#define RT_OID_WSC_PIN_CODE 0x0752
#define RT_OID_WSC_UUID 0x0753
@@ -555,20 +555,20 @@ enum {
#define RT_OID_WSC_SERIAL_NO 0x0759
#define RT_OID_WSC_MAC_ADDRESS 0x0760
-// New for MeetingHouse Api support
+/* New for MeetingHouse Api support */
#define OID_MH_802_1X_SUPPORTED 0xFFEDC100
-// MIMO Tx parameter, ShortGI, MCS, STBC, etc. these are fields in TXWI. Don't change this definition!!!
+/* MIMO Tx parameter, ShortGI, MCS, STBC, etc. these are fields in TXWI. Don't change this definition!!! */
typedef union _HTTRANSMIT_SETTING {
struct {
- USHORT MCS:7; // MCS
- USHORT BW:1; //channel bandwidth 20MHz or 40 MHz
+ USHORT MCS:7; /* MCS */
+ USHORT BW:1; /*channel bandwidth 20MHz or 40 MHz */
USHORT ShortGI:1;
- USHORT STBC:2; //SPACE
-// USHORT rsv:3;
+ USHORT STBC:2; /*SPACE */
+/* USHORT rsv:3; */
USHORT rsv:2;
USHORT TxBF:1;
- USHORT MODE:2; // Use definition MODE_xxx.
+ USHORT MODE:2; /* Use definition MODE_xxx. */
} field;
USHORT word;
} HTTRANSMIT_SETTING, *PHTTRANSMIT_SETTING;
@@ -585,45 +585,45 @@ typedef enum _RT_802_11_PHY_MODE {
PHY_11A,
PHY_11ABG_MIXED,
PHY_11G,
- PHY_11ABGN_MIXED, // both band 5
- PHY_11N_2_4G, // 11n-only with 2.4G band 6
- PHY_11GN_MIXED, // 2.4G band 7
- PHY_11AN_MIXED, // 5G band 8
- PHY_11BGN_MIXED, // if check 802.11b. 9
- PHY_11AGN_MIXED, // if check 802.11b. 10
- PHY_11N_5G, // 11n-only with 5G band 11
+ PHY_11ABGN_MIXED, /* both band 5 */
+ PHY_11N_2_4G, /* 11n-only with 2.4G band 6 */
+ PHY_11GN_MIXED, /* 2.4G band 7 */
+ PHY_11AN_MIXED, /* 5G band 8 */
+ PHY_11BGN_MIXED, /* if check 802.11b. 9 */
+ PHY_11AGN_MIXED, /* if check 802.11b. 10 */
+ PHY_11N_5G, /* 11n-only with 5G band 11 */
} RT_802_11_PHY_MODE;
-// put all proprietery for-query objects here to reduce # of Query_OID
+/* put all proprietery for-query objects here to reduce # of Query_OID */
typedef struct _RT_802_11_LINK_STATUS {
- ULONG CurrTxRate; // in units of 0.5Mbps
- ULONG ChannelQuality; // 0..100 %
- ULONG TxByteCount; // both ok and fail
- ULONG RxByteCount; // both ok and fail
- ULONG CentralChannel; // 40MHz central channel number
+ ULONG CurrTxRate; /* in units of 0.5Mbps */
+ ULONG ChannelQuality; /* 0..100 % */
+ ULONG TxByteCount; /* both ok and fail */
+ ULONG RxByteCount; /* both ok and fail */
+ ULONG CentralChannel; /* 40MHz central channel number */
} RT_802_11_LINK_STATUS, *PRT_802_11_LINK_STATUS;
typedef struct _RT_802_11_EVENT_LOG {
- LARGE_INTEGER SystemTime; // timestammp via NdisGetCurrentSystemTime()
+ LARGE_INTEGER SystemTime; /* timestammp via NdisGetCurrentSystemTime() */
UCHAR Addr[MAC_ADDR_LENGTH];
- USHORT Event; // EVENT_xxx
+ USHORT Event; /* EVENT_xxx */
} RT_802_11_EVENT_LOG, *PRT_802_11_EVENT_LOG;
typedef struct _RT_802_11_EVENT_TABLE {
ULONG Num;
- ULONG Rsv; // to align Log[] at LARGE_INEGER boundary
+ ULONG Rsv; /* to align Log[] at LARGE_INEGER boundary */
RT_802_11_EVENT_LOG Log[MAX_NUMBER_OF_EVENT];
} RT_802_11_EVENT_TABLE, PRT_802_11_EVENT_TABLE;
-// MIMO Tx parameter, ShortGI, MCS, STBC, etc. these are fields in TXWI. Don't change this definition!!!
+/* MIMO Tx parameter, ShortGI, MCS, STBC, etc. these are fields in TXWI. Don't change this definition!!! */
typedef union _MACHTTRANSMIT_SETTING {
struct {
- USHORT MCS:7; // MCS
- USHORT BW:1; //channel bandwidth 20MHz or 40 MHz
+ USHORT MCS:7; /* MCS */
+ USHORT BW:1; /*channel bandwidth 20MHz or 40 MHz */
USHORT ShortGI:1;
- USHORT STBC:2; //SPACE
+ USHORT STBC:2; /*SPACE */
USHORT rsv:3;
- USHORT MODE:2; // Use definition MODE_xxx.
+ USHORT MODE:2; /* Use definition MODE_xxx. */
} field;
USHORT word;
} MACHTTRANSMIT_SETTING, *PMACHTTRANSMIT_SETTING;
@@ -631,8 +631,8 @@ typedef union _MACHTTRANSMIT_SETTING {
typedef struct _RT_802_11_MAC_ENTRY {
UCHAR Addr[MAC_ADDR_LENGTH];
UCHAR Aid;
- UCHAR Psm; // 0:PWR_ACTIVE, 1:PWR_SAVE
- UCHAR MimoPs; // 0:MMPS_STATIC, 1:MMPS_DYNAMIC, 3:MMPS_Enabled
+ UCHAR Psm; /* 0:PWR_ACTIVE, 1:PWR_SAVE */
+ UCHAR MimoPs; /* 0:MMPS_STATIC, 1:MMPS_DYNAMIC, 3:MMPS_Enabled */
CHAR AvgRssi0;
CHAR AvgRssi1;
CHAR AvgRssi2;
@@ -645,48 +645,48 @@ typedef struct _RT_802_11_MAC_TABLE {
RT_802_11_MAC_ENTRY Entry[MAX_NUMBER_OF_MAC];
} RT_802_11_MAC_TABLE, *PRT_802_11_MAC_TABLE;
-// structure for query/set hardware register - MAC, BBP, RF register
+/* structure for query/set hardware register - MAC, BBP, RF register */
typedef struct _RT_802_11_HARDWARE_REGISTER {
- ULONG HardwareType; // 0:MAC, 1:BBP, 2:RF register, 3:EEPROM
- ULONG Offset; // Q/S register offset addr
- ULONG Data; // R/W data buffer
+ ULONG HardwareType; /* 0:MAC, 1:BBP, 2:RF register, 3:EEPROM */
+ ULONG Offset; /* Q/S register offset addr */
+ ULONG Data; /* R/W data buffer */
} RT_802_11_HARDWARE_REGISTER, *PRT_802_11_HARDWARE_REGISTER;
typedef struct _RT_802_11_AP_CONFIG {
- ULONG EnableTxBurst; // 0-disable, 1-enable
- ULONG EnableTurboRate; // 0-disable, 1-enable 72/100mbps turbo rate
- ULONG IsolateInterStaTraffic; // 0-disable, 1-enable isolation
- ULONG HideSsid; // 0-disable, 1-enable hiding
- ULONG UseBGProtection; // 0-AUTO, 1-always ON, 2-always OFF
- ULONG UseShortSlotTime; // 0-no use, 1-use 9-us short slot time
- ULONG Rsv1; // must be 0
- ULONG SystemErrorBitmap; // ignore upon SET, return system error upon QUERY
+ ULONG EnableTxBurst; /* 0-disable, 1-enable */
+ ULONG EnableTurboRate; /* 0-disable, 1-enable 72/100mbps turbo rate */
+ ULONG IsolateInterStaTraffic; /* 0-disable, 1-enable isolation */
+ ULONG HideSsid; /* 0-disable, 1-enable hiding */
+ ULONG UseBGProtection; /* 0-AUTO, 1-always ON, 2-always OFF */
+ ULONG UseShortSlotTime; /* 0-no use, 1-use 9-us short slot time */
+ ULONG Rsv1; /* must be 0 */
+ ULONG SystemErrorBitmap; /* ignore upon SET, return system error upon QUERY */
} RT_802_11_AP_CONFIG, *PRT_802_11_AP_CONFIG;
-// structure to query/set STA_CONFIG
+/* structure to query/set STA_CONFIG */
typedef struct _RT_802_11_STA_CONFIG {
- ULONG EnableTxBurst; // 0-disable, 1-enable
- ULONG EnableTurboRate; // 0-disable, 1-enable 72/100mbps turbo rate
- ULONG UseBGProtection; // 0-AUTO, 1-always ON, 2-always OFF
- ULONG UseShortSlotTime; // 0-no use, 1-use 9-us short slot time when applicable
- ULONG AdhocMode; // 0-11b rates only (WIFI spec), 1 - b/g mixed, 2 - g only
- ULONG HwRadioStatus; // 0-OFF, 1-ON, default is 1, Read-Only
- ULONG Rsv1; // must be 0
- ULONG SystemErrorBitmap; // ignore upon SET, return system error upon QUERY
+ ULONG EnableTxBurst; /* 0-disable, 1-enable */
+ ULONG EnableTurboRate; /* 0-disable, 1-enable 72/100mbps turbo rate */
+ ULONG UseBGProtection; /* 0-AUTO, 1-always ON, 2-always OFF */
+ ULONG UseShortSlotTime; /* 0-no use, 1-use 9-us short slot time when applicable */
+ ULONG AdhocMode; /* 0-11b rates only (WIFI spec), 1 - b/g mixed, 2 - g only */
+ ULONG HwRadioStatus; /* 0-OFF, 1-ON, default is 1, Read-Only */
+ ULONG Rsv1; /* must be 0 */
+ ULONG SystemErrorBitmap; /* ignore upon SET, return system error upon QUERY */
} RT_802_11_STA_CONFIG, *PRT_802_11_STA_CONFIG;
-//
-// For OID Query or Set about BA structure
-//
+/* */
+/* For OID Query or Set about BA structure */
+/* */
typedef struct _OID_BACAP_STRUC {
UCHAR RxBAWinLimit;
UCHAR TxBAWinLimit;
- UCHAR Policy; // 0: DELAY_BA 1:IMMED_BA (//BA Policy subfiled value in ADDBA frame) 2:BA-not use. other value invalid
- UCHAR MpduDensity; // 0: DELAY_BA 1:IMMED_BA (//BA Policy subfiled value in ADDBA frame) 2:BA-not use. other value invalid
- UCHAR AmsduEnable; //Enable AMSDU transmisstion
- UCHAR AmsduSize; // 0:3839, 1:7935 bytes. UINT MSDUSizeToBytes[] = { 3839, 7935};
- UCHAR MMPSmode; // MIMO power save more, 0:static, 1:dynamic, 2:rsv, 3:mimo enable
- BOOLEAN AutoBA; // Auto BA will automatically
+ UCHAR Policy; /* 0: DELAY_BA 1:IMMED_BA (//BA Policy subfiled value in ADDBA frame) 2:BA-not use. other value invalid */
+ UCHAR MpduDensity; /* 0: DELAY_BA 1:IMMED_BA (//BA Policy subfiled value in ADDBA frame) 2:BA-not use. other value invalid */
+ UCHAR AmsduEnable; /*Enable AMSDU transmisstion */
+ UCHAR AmsduSize; /* 0:3839, 1:7935 bytes. UINT MSDUSizeToBytes[] = { 3839, 7935}; */
+ UCHAR MMPSmode; /* MIMO power save more, 0:static, 1:dynamic, 2:rsv, 3:mimo enable */
+ BOOLEAN AutoBA; /* Auto BA will automatically */
} OID_BACAP_STRUC, *POID_BACAP_STRUC;
typedef struct _RT_802_11_ACL_ENTRY {
@@ -695,7 +695,7 @@ typedef struct _RT_802_11_ACL_ENTRY {
} RT_802_11_ACL_ENTRY, *PRT_802_11_ACL_ENTRY;
typedef struct PACKED _RT_802_11_ACL {
- ULONG Policy; // 0-disable, 1-positive list, 2-negative list
+ ULONG Policy; /* 0-disable, 1-positive list, 2-negative list */
ULONG Num;
RT_802_11_ACL_ENTRY Entry[MAX_NUMBER_OF_ACL];
} RT_802_11_ACL, *PRT_802_11_ACL;
@@ -714,29 +714,29 @@ typedef struct _RT_802_11_TX_RATES_ {
UCHAR ExtRate[MAX_LENGTH_OF_SUPPORT_RATES];
} RT_802_11_TX_RATES, *PRT_802_11_TX_RATES;
-// Definition of extra information code
-#define GENERAL_LINK_UP 0x0 // Link is Up
-#define GENERAL_LINK_DOWN 0x1 // Link is Down
-#define HW_RADIO_OFF 0x2 // Hardware radio off
-#define SW_RADIO_OFF 0x3 // Software radio off
-#define AUTH_FAIL 0x4 // Open authentication fail
-#define AUTH_FAIL_KEYS 0x5 // Shared authentication fail
-#define ASSOC_FAIL 0x6 // Association failed
-#define EAP_MIC_FAILURE 0x7 // Deauthencation because MIC failure
-#define EAP_4WAY_TIMEOUT 0x8 // Deauthencation on 4-way handshake timeout
-#define EAP_GROUP_KEY_TIMEOUT 0x9 // Deauthencation on group key handshake timeout
-#define EAP_SUCCESS 0xa // EAP succeed
-#define DETECT_RADAR_SIGNAL 0xb // Radar signal occur in current channel
-#define EXTRA_INFO_MAX 0xb // Indicate Last OID
+/* Definition of extra information code */
+#define GENERAL_LINK_UP 0x0 /* Link is Up */
+#define GENERAL_LINK_DOWN 0x1 /* Link is Down */
+#define HW_RADIO_OFF 0x2 /* Hardware radio off */
+#define SW_RADIO_OFF 0x3 /* Software radio off */
+#define AUTH_FAIL 0x4 /* Open authentication fail */
+#define AUTH_FAIL_KEYS 0x5 /* Shared authentication fail */
+#define ASSOC_FAIL 0x6 /* Association failed */
+#define EAP_MIC_FAILURE 0x7 /* Deauthencation because MIC failure */
+#define EAP_4WAY_TIMEOUT 0x8 /* Deauthencation on 4-way handshake timeout */
+#define EAP_GROUP_KEY_TIMEOUT 0x9 /* Deauthencation on group key handshake timeout */
+#define EAP_SUCCESS 0xa /* EAP succeed */
+#define DETECT_RADAR_SIGNAL 0xb /* Radar signal occur in current channel */
+#define EXTRA_INFO_MAX 0xb /* Indicate Last OID */
#define EXTRA_INFO_CLEAR 0xffffffff
-// This is OID setting structure. So only GF or MM as Mode. This is valid when our wirelss mode has 802.11n in use.
+/* This is OID setting structure. So only GF or MM as Mode. This is valid when our wirelss mode has 802.11n in use. */
typedef struct {
- RT_802_11_PHY_MODE PhyMode; //
+ RT_802_11_PHY_MODE PhyMode; /* */
UCHAR TransmitNo;
- UCHAR HtMode; //HTMODE_GF or HTMODE_MM
- UCHAR ExtOffset; //extension channel above or below
+ UCHAR HtMode; /*HTMODE_GF or HTMODE_MM */
+ UCHAR ExtOffset; /*extension channel above or below */
UCHAR MCS;
UCHAR BW;
UCHAR STBC;
@@ -753,27 +753,27 @@ typedef enum _RT_802_11_D_CLIENT_MODE {
} RT_802_11_D_CLIENT_MODE, *PRT_802_11_D_CLIENT_MODE;
typedef struct _RT_CHANNEL_LIST_INFO {
- UCHAR ChannelList[MAX_NUM_OF_CHS]; // list all supported channels for site survey
- UCHAR ChannelListNum; // number of channel in ChannelList[]
+ UCHAR ChannelList[MAX_NUM_OF_CHS]; /* list all supported channels for site survey */
+ UCHAR ChannelListNum; /* number of channel in ChannelList[] */
} RT_CHANNEL_LIST_INFO, *PRT_CHANNEL_LIST_INFO;
-// WSC configured credential
+/* WSC configured credential */
typedef struct _WSC_CREDENTIAL {
- NDIS_802_11_SSID SSID; // mandatory
- USHORT AuthType; // mandatory, 1: open, 2: wpa-psk, 4: shared, 8:wpa, 0x10: wpa2, 0x20: wpa2-psk
- USHORT EncrType; // mandatory, 1: none, 2: wep, 4: tkip, 8: aes
- UCHAR Key[64]; // mandatory, Maximum 64 byte
+ NDIS_802_11_SSID SSID; /* mandatory */
+ USHORT AuthType; /* mandatory, 1: open, 2: wpa-psk, 4: shared, 8:wpa, 0x10: wpa2, 0x20: wpa2-psk */
+ USHORT EncrType; /* mandatory, 1: none, 2: wep, 4: tkip, 8: aes */
+ UCHAR Key[64]; /* mandatory, Maximum 64 byte */
USHORT KeyLength;
- UCHAR MacAddr[6]; // mandatory, AP MAC address
- UCHAR KeyIndex; // optional, default is 1
- UCHAR Rsvd[3]; // Make alignment
+ UCHAR MacAddr[6]; /* mandatory, AP MAC address */
+ UCHAR KeyIndex; /* optional, default is 1 */
+ UCHAR Rsvd[3]; /* Make alignment */
} WSC_CREDENTIAL, *PWSC_CREDENTIAL;
-// WSC configured profiles
+/* WSC configured profiles */
typedef struct _WSC_PROFILE {
UINT ProfileCnt;
- UINT ApplyProfileIdx; // add by johnli, fix WPS test plan 5.1.1
- WSC_CREDENTIAL Profile[8]; // Support up to 8 profiles
+ UINT ApplyProfileIdx; /* add by johnli, fix WPS test plan 5.1.1 */
+ WSC_CREDENTIAL Profile[8]; /* Support up to 8 profiles */
} WSC_PROFILE, *PWSC_PROFILE;
-#endif // _OID_H_
+#endif /* _OID_H_ */
diff --git a/drivers/staging/rt2860/rt_config.h b/drivers/staging/rt2860/rt_config.h
index 8fa3f11..d1adef8 100644
--- a/drivers/staging/rt2860/rt_config.h
+++ b/drivers/staging/rt2860/rt_config.h
@@ -66,6 +66,6 @@
#ifdef IGMP_SNOOP_SUPPORT
#include "igmp_snoop.h"
-#endif // IGMP_SNOOP_SUPPORT //
+#endif /* IGMP_SNOOP_SUPPORT // */
-#endif // __RT_CONFIG_H__
+#endif /* __RT_CONFIG_H__ */
diff --git a/drivers/staging/rt2860/rt_linux.h b/drivers/staging/rt2860/rt_linux.h
index 478c8d0..1e27c66 100644
--- a/drivers/staging/rt2860/rt_linux.h
+++ b/drivers/staging/rt2860/rt_linux.h
@@ -60,20 +60,20 @@
#include <net/iw_handler.h>
-// load firmware
+/* load firmware */
#define __KERNEL_SYSCALLS__
#include <linux/unistd.h>
#include <asm/uaccess.h>
#include <asm/types.h>
-#include <asm/unaligned.h> // for get_unaligned()
+#include <asm/unaligned.h> /* for get_unaligned() */
#define KTHREAD_SUPPORT 1
-// RT2870 2.1.0.0 has it disabled
+/* RT2870 2.1.0.0 has it disabled */
#ifdef KTHREAD_SUPPORT
#include <linux/err.h>
#include <linux/kthread.h>
-#endif // KTHREAD_SUPPORT //
+#endif /* KTHREAD_SUPPORT // */
/***********************************************************************************
* Profile related sections
@@ -82,12 +82,12 @@
#ifdef RTMP_MAC_PCI
#define STA_PROFILE_PATH "/etc/Wireless/RT2860STA/RT2860STA.dat"
#define STA_DRIVER_VERSION "2.1.0.0"
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
#ifdef RTMP_MAC_USB
#define STA_PROFILE_PATH "/etc/Wireless/RT2870STA/RT2870STA.dat"
#define STA_DRIVER_VERSION "2.1.0.0"
-// RT3070 version: 2.1.1.0
-#endif // RTMP_MAC_USB //
+/* RT3070 version: 2.1.1.0 */
+#endif /* RTMP_MAC_USB // */
extern const struct iw_handler_def rt28xx_iw_handler_def;
@@ -124,8 +124,8 @@ typedef int (*HARD_START_XMIT_FUNC) (struct sk_buff * skb,
#define PCI_DEVICE(vend,dev) \
.vendor = (vend), .device = (dev), \
.subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID
-#endif // PCI_DEVICE //
-#endif // RTMP_MAC_PCI //
+#endif /* PCI_DEVICE // */
+#endif /* RTMP_MAC_PCI // */
#define RT_MOD_INC_USE_COUNT() \
if (!try_module_get(THIS_MODULE)) \
@@ -140,7 +140,7 @@ typedef int (*HARD_START_XMIT_FUNC) (struct sk_buff * skb,
#define RTMP_DEC_REF(_A) 0
#define RTMP_GET_REF(_A) 0
-// This function will be called when query /proc
+/* This function will be called when query /proc */
struct iw_statistics *rt28xx_get_wireless_stats(IN struct net_device *net_dev);
/***********************************************************************************
@@ -176,13 +176,13 @@ struct iw_statistics *rt28xx_get_wireless_stats(IN struct net_device *net_dev);
/***********************************************************************************
* Ralink Specific network related constant definitions
***********************************************************************************/
-#define MIN_NET_DEVICE_FOR_AID 0x00 //0x00~0x3f
-#define MIN_NET_DEVICE_FOR_MBSSID 0x00 //0x00,0x10,0x20,0x30
-#define MIN_NET_DEVICE_FOR_WDS 0x10 //0x40,0x50,0x60,0x70
+#define MIN_NET_DEVICE_FOR_AID 0x00 /*0x00~0x3f */
+#define MIN_NET_DEVICE_FOR_MBSSID 0x00 /*0x00,0x10,0x20,0x30 */
+#define MIN_NET_DEVICE_FOR_WDS 0x10 /*0x40,0x50,0x60,0x70 */
#define MIN_NET_DEVICE_FOR_APCLI 0x20
#define MIN_NET_DEVICE_FOR_MESH 0x30
#define MIN_NET_DEVICE_FOR_DLS 0x40
-#define NET_DEVICE_REAL_IDX_MASK 0x0f // for each operation mode, we maximum support 15 entities.
+#define NET_DEVICE_REAL_IDX_MASK 0x0f /* for each operation mode, we maximum support 15 entities. */
#define NDIS_PACKET_TYPE_DIRECTED 0
#define NDIS_PACKET_TYPE_MULTICAST 1
@@ -217,9 +217,9 @@ struct os_lock {
typedef spinlock_t NDIS_SPIN_LOCK;
-//
-// spin_lock enhanced for Nested spin lock
-//
+/* */
+/* spin_lock enhanced for Nested spin lock */
+/* */
#define NdisAllocateSpinLock(__lock) \
{ \
spin_lock_init((spinlock_t *)(__lock)); \
@@ -238,7 +238,7 @@ typedef spinlock_t NDIS_SPIN_LOCK;
spin_unlock_bh((spinlock_t *)(__lock)); \
}
-// sample, use semaphore lock to replace IRQ lock, 2007/11/15
+/* sample, use semaphore lock to replace IRQ lock, 2007/11/15 */
#define RTMP_IRQ_LOCK(__lock, __irqflags) \
{ \
__irqflags = 0; \
@@ -330,7 +330,7 @@ do { \
/***********************************************************************************
* OS Memory Access related data structure and definitions
***********************************************************************************/
-#define MEM_ALLOC_FLAG (GFP_ATOMIC) //(GFP_DMA | GFP_ATOMIC)
+#define MEM_ALLOC_FLAG (GFP_ATOMIC) /*(GFP_DMA | GFP_ATOMIC) */
#define NdisMoveMemory(Destination, Source, Length) memmove(Destination, Source, Length)
#define NdisCopyMemory(Destination, Source, Length) memcpy(Destination, Source, Length)
@@ -405,10 +405,10 @@ struct os_cookie {
struct pci_dev *parent_pci_dev;
USHORT DeviceID;
dma_addr_t pAd_pa;
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
#ifdef RTMP_MAC_USB
struct usb_device *pUsb_Dev;
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
RTMP_NET_TASK_STRUCT rx_done_task;
RTMP_NET_TASK_STRUCT mgmt_dma_done_task;
@@ -419,14 +419,14 @@ struct os_cookie {
RTMP_NET_TASK_STRUCT tbtt_task;
#ifdef RTMP_MAC_PCI
RTMP_NET_TASK_STRUCT fifo_statistic_full_task;
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
#ifdef RTMP_MAC_USB
RTMP_NET_TASK_STRUCT null_frame_complete_task;
RTMP_NET_TASK_STRUCT rts_frame_complete_task;
RTMP_NET_TASK_STRUCT pspoll_frame_complete_task;
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
- unsigned long apd_pid; //802.1x daemon pid
+ unsigned long apd_pid; /*802.1x daemon pid */
INT ioctl_if_type;
INT ioctl_if;
};
@@ -501,12 +501,12 @@ void linux_pci_unmap_single(void *handle, dma_addr_t dma_addr, size_t size,
#define DEV_ALLOC_SKB(_length) \
dev_alloc_skb(_length)
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
#ifdef RTMP_MAC_USB
#define PCI_MAP_SINGLE(_handle, _ptr, _size, _dir) (ULONG)0
#define PCI_UNMAP_SINGLE(_handle, _ptr, _size, _dir)
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
/*
* ULONG
@@ -545,7 +545,7 @@ void linux_pci_unmap_single(void *handle, dma_addr_t dma_addr, size_t size,
* Device Register I/O Access related definitions and data structures.
**********************************************************************************/
#ifdef RTMP_MAC_PCI
-//Patch for ASIC turst read/write bug, needs to remove after metel fix
+/*Patch for ASIC turst read/write bug, needs to remove after metel fix */
#define RTMP_IO_READ32(_A, _R, _pV) \
{ \
if ((_A)->bPCIclkOff == FALSE) \
@@ -603,7 +603,7 @@ void linux_pci_unmap_single(void *handle, dma_addr_t dma_addr, size_t size,
Val = readl((void *)((_A)->CSRBaseAddress + MAC_CSR0)); \
writeb((_V), (PUCHAR)((_A)->CSRBaseAddress + (_R))); \
}
-#endif // #if defined(BRCM_6358) || defined(RALINK_2880) //
+#endif /* #if defined(BRCM_6358) || defined(RALINK_2880) // */
#define RTMP_IO_WRITE16(_A, _R, _V) \
{ \
@@ -611,9 +611,9 @@ void linux_pci_unmap_single(void *handle, dma_addr_t dma_addr, size_t size,
Val = readl((void *)((_A)->CSRBaseAddress + MAC_CSR0)); \
writew((_V), (PUSHORT)((_A)->CSRBaseAddress + (_R))); \
}
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
#ifdef RTMP_MAC_USB
-//Patch for ASIC turst read/write bug, needs to remove after metel fix
+/*Patch for ASIC turst read/write bug, needs to remove after metel fix */
#define RTMP_IO_READ32(_A, _R, _pV) \
RTUSBReadMACRegister((_A), (_R), (PUINT32) (_pV))
@@ -634,7 +634,7 @@ void linux_pci_unmap_single(void *handle, dma_addr_t dma_addr, size_t size,
{ \
RTUSBSingleWrite((_A), (_R), (USHORT) (_V)); \
}
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
/***********************************************************************************
* Network Related data structure and marco definitions
@@ -719,34 +719,34 @@ void linux_pci_unmap_single(void *handle, dma_addr_t dma_addr, size_t size,
#define CB_OFF 10
-// User Priority
+/* User Priority */
#define RTMP_SET_PACKET_UP(_p, _prio) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+0] = _prio)
#define RTMP_GET_PACKET_UP(_p) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+0])
-// Fragment #
+/* Fragment # */
#define RTMP_SET_PACKET_FRAGMENTS(_p, _num) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+1] = _num)
#define RTMP_GET_PACKET_FRAGMENTS(_p) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+1])
-// 0x0 ~0x7f: TX to AP's own BSS which has the specified AID. if AID>127, set bit 7 in RTMP_SET_PACKET_EMACTAB too.
-//(this value also as MAC(on-chip WCID) table index)
-// 0x80~0xff: TX to a WDS link. b0~6: WDS index
+/* 0x0 ~0x7f: TX to AP's own BSS which has the specified AID. if AID>127, set bit 7 in RTMP_SET_PACKET_EMACTAB too. */
+/*(this value also as MAC(on-chip WCID) table index) */
+/* 0x80~0xff: TX to a WDS link. b0~6: WDS index */
#define RTMP_SET_PACKET_WCID(_p, _wdsidx) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+2] = _wdsidx)
#define RTMP_GET_PACKET_WCID(_p) ((UCHAR)(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+2]))
-// 0xff: PKTSRC_NDIS, others: local TX buffer index. This value affects how to a packet
+/* 0xff: PKTSRC_NDIS, others: local TX buffer index. This value affects how to a packet */
#define RTMP_SET_PACKET_SOURCE(_p, _pktsrc) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+3] = _pktsrc)
#define RTMP_GET_PACKET_SOURCE(_p) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+3])
-// RTS/CTS-to-self protection method
+/* RTS/CTS-to-self protection method */
#define RTMP_SET_PACKET_RTS(_p, _num) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+4] = _num)
#define RTMP_GET_PACKET_RTS(_p) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+4])
-// see RTMP_S(G)ET_PACKET_EMACTAB
+/* see RTMP_S(G)ET_PACKET_EMACTAB */
-// TX rate index
+/* TX rate index */
#define RTMP_SET_PACKET_TXRATE(_p, _rate) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+5] = _rate)
#define RTMP_GET_PACKET_TXRATE(_p) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+5])
-// From which Interface
+/* From which Interface */
#define RTMP_SET_PACKET_IF(_p, _ifdx) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+6] = _ifdx)
#define RTMP_GET_PACKET_IF(_p) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+6])
#define RTMP_SET_PACKET_NET_DEVICE_MBSSID(_p, _bss) RTMP_SET_PACKET_IF((_p), (_bss))
@@ -759,9 +759,9 @@ void linux_pci_unmap_single(void *handle, dma_addr_t dma_addr, size_t size,
#define RTMP_SET_PACKET_MOREDATA(_p, _morebit) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+7] = _morebit)
#define RTMP_GET_PACKET_MOREDATA(_p) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+7])
-//
-// Sepcific Pakcet Type definition
-//
+/* */
+/* Sepcific Pakcet Type definition */
+/* */
#define RTMP_PACKET_SPECIFIC_CB_OFFSET 11
#define RTMP_PACKET_SPECIFIC_DHCP 0x01
@@ -771,10 +771,10 @@ void linux_pci_unmap_single(void *handle, dma_addr_t dma_addr, size_t size,
#define RTMP_PACKET_SPECIFIC_VLAN 0x10
#define RTMP_PACKET_SPECIFIC_LLCSNAP 0x20
-//Specific
+/*Specific */
#define RTMP_SET_PACKET_SPECIFIC(_p, _flg) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11] = _flg)
-//DHCP
+/*DHCP */
#define RTMP_SET_PACKET_DHCP(_p, _flg) \
do{ \
if (_flg) \
@@ -784,7 +784,7 @@ void linux_pci_unmap_single(void *handle, dma_addr_t dma_addr, size_t size,
}while(0)
#define RTMP_GET_PACKET_DHCP(_p) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11] & RTMP_PACKET_SPECIFIC_DHCP)
-//EAPOL
+/*EAPOL */
#define RTMP_SET_PACKET_EAPOL(_p, _flg) \
do{ \
if (_flg) \
@@ -794,7 +794,7 @@ void linux_pci_unmap_single(void *handle, dma_addr_t dma_addr, size_t size,
}while(0)
#define RTMP_GET_PACKET_EAPOL(_p) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11] & RTMP_PACKET_SPECIFIC_EAPOL)
-//WAI
+/*WAI */
#define RTMP_SET_PACKET_WAI(_p, _flg) \
do{ \
if (_flg) \
@@ -806,7 +806,7 @@ void linux_pci_unmap_single(void *handle, dma_addr_t dma_addr, size_t size,
#define RTMP_GET_PACKET_LOWRATE(_p) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11] & (RTMP_PACKET_SPECIFIC_EAPOL | RTMP_PACKET_SPECIFIC_DHCP | RTMP_PACKET_SPECIFIC_WAI))
-//VLAN
+/*VLAN */
#define RTMP_SET_PACKET_VLAN(_p, _flg) \
do{ \
if (_flg) \
@@ -816,7 +816,7 @@ void linux_pci_unmap_single(void *handle, dma_addr_t dma_addr, size_t size,
}while(0)
#define RTMP_GET_PACKET_VLAN(_p) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11] & RTMP_PACKET_SPECIFIC_VLAN)
-//LLC/SNAP
+/*LLC/SNAP */
#define RTMP_SET_PACKET_LLCSNAP(_p, _flg) \
do{ \
if (_flg) \
@@ -827,7 +827,7 @@ void linux_pci_unmap_single(void *handle, dma_addr_t dma_addr, size_t size,
#define RTMP_GET_PACKET_LLCSNAP(_p) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11] & RTMP_PACKET_SPECIFIC_LLCSNAP)
-// IP
+/* IP */
#define RTMP_SET_PACKET_IPV4(_p, _flg) \
do{ \
if (_flg) \
@@ -838,7 +838,7 @@ void linux_pci_unmap_single(void *handle, dma_addr_t dma_addr, size_t size,
#define RTMP_GET_PACKET_IPV4(_p) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11] & RTMP_PACKET_SPECIFIC_IPV4)
-// If this flag is set, it indicates that this EAPoL frame MUST be clear.
+/* If this flag is set, it indicates that this EAPoL frame MUST be clear. */
#define RTMP_SET_PACKET_CLEAR_EAP_FRAME(_p, _flg) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+12] = _flg)
#define RTMP_GET_PACKET_CLEAR_EAP_FRAME(_p) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+12])
@@ -860,7 +860,7 @@ int rt28xx_packet_xmit(struct sk_buff *skb);
#define IRQ_HANDLE_TYPE irqreturn_t
IRQ_HANDLE_TYPE rt2860_interrupt(int irq, void *dev_instance);
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
INT rt28xx_sta_ioctl(IN PNET_DEV net_dev, IN OUT struct ifreq *rq, IN INT cmd);
@@ -869,4 +869,4 @@ extern int ra_mtd_read(int num, loff_t from, size_t len, u_char * buf);
#define GET_PAD_FROM_NET_DEV(_pAd, _net_dev) (_pAd) = (PRTMP_ADAPTER)(_net_dev)->ml_priv;
-#endif // __RT_LINUX_H__ //
+#endif /* __RT_LINUX_H__ // */
diff --git a/drivers/staging/rt2860/rtmp.h b/drivers/staging/rt2860/rtmp.h
index f6b8f62..2ac9663 100644
--- a/drivers/staging/rt2860/rtmp.h
+++ b/drivers/staging/rt2860/rtmp.h
@@ -49,14 +49,14 @@ typedef struct _RTMP_ADAPTER *PRTMP_ADAPTER;
typedef struct _RTMP_CHIP_OP_ RTMP_CHIP_OP;
-//#define DBG 1
+/*#define DBG 1 */
-//#define DBG_DIAGNOSE 1
+/*#define DBG_DIAGNOSE 1 */
-//+++Add by shiang for merge MiniportMMRequest() and MiniportDataMMRequest() into one function
+/*+++Add by shiang for merge MiniportMMRequest() and MiniportDataMMRequest() into one function */
#define MAX_DATAMM_RETRY 3
#define MGMT_USE_QUEUE_FLAG 0x80
-//---Add by shiang for merge MiniportMMRequest() and MiniportDataMMRequest() into one function
+/*---Add by shiang for merge MiniportMMRequest() and MiniportDataMMRequest() into one function */
#define MAXSEQ (0xFFF)
@@ -79,7 +79,7 @@ extern UCHAR EAPOL_LLC_SNAP[8];
extern UCHAR EAPOL[2];
extern UCHAR IPX[2];
extern UCHAR APPLE_TALK[2];
-extern UCHAR RateIdToPlcpSignal[12]; // see IEEE802.11a-1999 p.14
+extern UCHAR RateIdToPlcpSignal[12]; /* see IEEE802.11a-1999 p.14 */
extern UCHAR OfdmRateToRxwiMCS[];
extern UCHAR OfdmSignalToRateId[16];
extern UCHAR default_cwmin[4];
@@ -147,9 +147,9 @@ extern UCHAR RateSwitchTable11N2SForABand[];
extern UCHAR PRE_N_HT_OUI[];
typedef struct _RSSI_SAMPLE {
- CHAR LastRssi0; // last received RSSI
- CHAR LastRssi1; // last received RSSI
- CHAR LastRssi2; // last received RSSI
+ CHAR LastRssi0; /* last received RSSI */
+ CHAR LastRssi1; /* last received RSSI */
+ CHAR LastRssi2; /* last received RSSI */
CHAR AvgRssi0;
CHAR AvgRssi1;
CHAR AvgRssi2;
@@ -158,14 +158,14 @@ typedef struct _RSSI_SAMPLE {
SHORT AvgRssi2X8;
} RSSI_SAMPLE;
-//
-// Queue structure and macros
-//
+/* */
+/* Queue structure and macros */
+/* */
typedef struct _QUEUE_ENTRY {
struct _QUEUE_ENTRY *Next;
} QUEUE_ENTRY, *PQUEUE_ENTRY;
-// Queue structure
+/* Queue structure */
typedef struct _QUEUE_HEADER {
PQUEUE_ENTRY Head;
PQUEUE_ENTRY Tail;
@@ -224,15 +224,15 @@ typedef struct _QUEUE_HEADER {
(QueueHeader)->Number++; \
}
-//
-// Macros for flag and ref count operations
-//
+/* */
+/* Macros for flag and ref count operations */
+/* */
#define RTMP_SET_FLAG(_M, _F) ((_M)->Flags |= (_F))
#define RTMP_CLEAR_FLAG(_M, _F) ((_M)->Flags &= ~(_F))
#define RTMP_CLEAR_FLAGS(_M) ((_M)->Flags = 0)
#define RTMP_TEST_FLAG(_M, _F) (((_M)->Flags & (_F)) != 0)
#define RTMP_TEST_FLAGS(_M, _F) (((_M)->Flags & (_F)) == (_F))
-// Macro for power save flag.
+/* Macro for power save flag. */
#define RTMP_SET_PSFLAG(_M, _F) ((_M)->PSFlags |= (_F))
#define RTMP_CLEAR_PSFLAG(_M, _F) ((_M)->PSFlags &= ~(_F))
#define RTMP_CLEAR_PSFLAGS(_M) ((_M)->PSFlags = 0)
@@ -266,7 +266,7 @@ typedef struct _QUEUE_HEADER {
(_idx) = (_idx+1) % (_RingSize); \
}
-// StaActive.SupportedHtPhy.MCSSet is copied from AP beacon. Don't need to update here.
+/* StaActive.SupportedHtPhy.MCSSet is copied from AP beacon. Don't need to update here. */
#define COPY_HTSETTINGS_FROM_MLME_AUX_TO_ACTIVE_CFG(_pAd) \
{ \
_pAd->StaActive.SupportedHtPhy.ChannelWidth = _pAd->MlmeAux.HtCapability.HtCapInfo.ChannelWidth; \
@@ -290,25 +290,25 @@ typedef struct _QUEUE_HEADER {
_pAd->MacTab.Content[BSSID_WCID].MaxRAmpduFactor = (UCHAR)(_pHtCapability->HtCapParm.MaxRAmpduFactor); \
}
-//
-// MACRO for 32-bit PCI register read / write
-//
-// Usage : RTMP_IO_READ32(
-// PRTMP_ADAPTER pAd,
-// ULONG Register_Offset,
-// PULONG pValue)
-//
-// RTMP_IO_WRITE32(
-// PRTMP_ADAPTER pAd,
-// ULONG Register_Offset,
-// ULONG Value)
-//
-
-//
-// Common fragment list structure - Identical to the scatter gather frag list structure
-//
-//#define RTMP_SCATTER_GATHER_ELEMENT SCATTER_GATHER_ELEMENT
-//#define PRTMP_SCATTER_GATHER_ELEMENT PSCATTER_GATHER_ELEMENT
+/* */
+/* MACRO for 32-bit PCI register read / write */
+/* */
+/* Usage : RTMP_IO_READ32( */
+/* PRTMP_ADAPTER pAd, */
+/* ULONG Register_Offset, */
+/* PULONG pValue) */
+/* */
+/* RTMP_IO_WRITE32( */
+/* PRTMP_ADAPTER pAd, */
+/* ULONG Register_Offset, */
+/* ULONG Value) */
+/* */
+
+/* */
+/* Common fragment list structure - Identical to the scatter gather frag list structure */
+/* */
+/*#define RTMP_SCATTER_GATHER_ELEMENT SCATTER_GATHER_ELEMENT */
+/*#define PRTMP_SCATTER_GATHER_ELEMENT PSCATTER_GATHER_ELEMENT */
#define NIC_MAX_PHYS_BUF_COUNT 8
typedef struct _RTMP_SCATTER_GATHER_ELEMENT {
@@ -323,9 +323,9 @@ typedef struct _RTMP_SCATTER_GATHER_LIST {
RTMP_SCATTER_GATHER_ELEMENT Elements[NIC_MAX_PHYS_BUF_COUNT];
} RTMP_SCATTER_GATHER_LIST, *PRTMP_SCATTER_GATHER_LIST;
-//
-// Some utility macros
-//
+/* */
+/* Some utility macros */
+/* */
#ifndef min
#define min(_a, _b) (((_a) < (_b)) ? (_a) : (_b))
#endif
@@ -343,11 +343,11 @@ typedef struct _RTMP_SCATTER_GATHER_LIST {
#define MONITOR_ON(_p) (((_p)->StaCfg.BssType) == BSS_MONITOR)
#define IDLE_ON(_p) (!INFRA_ON(_p) && !ADHOC_ON(_p))
-// Check LEAP & CCKM flags
+/* Check LEAP & CCKM flags */
#define LEAP_ON(_p) (((_p)->StaCfg.LeapAuthMode) == CISCO_AuthModeLEAP)
#define LEAP_CCKM_ON(_p) ((((_p)->StaCfg.LeapAuthMode) == CISCO_AuthModeLEAP) && ((_p)->StaCfg.LeapAuthInfo.CCKM == TRUE))
-// if orginal Ethernet frame contains no LLC/SNAP, then an extra LLC/SNAP encap is required
+/* if orginal Ethernet frame contains no LLC/SNAP, then an extra LLC/SNAP encap is required */
#define EXTRA_LLCSNAP_ENCAP_FROM_PKT_START(_pBufVA, _pExtraLlcSnapEncap) \
{ \
if (((*(_pBufVA + 12) << 8) + *(_pBufVA + 13)) > 1500) \
@@ -365,7 +365,7 @@ typedef struct _RTMP_SCATTER_GATHER_LIST {
} \
}
-// New Define for new Tx Path.
+/* New Define for new Tx Path. */
#define EXTRA_LLCSNAP_ENCAP_FROM_PKT_OFFSET(_pBufVA, _pExtraLlcSnapEncap) \
{ \
if (((*(_pBufVA) << 8) + *(_pBufVA + 1)) > 1500) \
@@ -390,13 +390,13 @@ typedef struct _RTMP_SCATTER_GATHER_LIST {
NdisMoveMemory((_p + MAC_ADDR_LEN * 2), _pType, LENGTH_802_3_TYPE); \
}
-// if pData has no LLC/SNAP (neither RFC1042 nor Bridge tunnel), keep it that way.
-// else if the received frame is LLC/SNAP-encaped IPX or APPLETALK, preserve the LLC/SNAP field
-// else remove the LLC/SNAP field from the result Ethernet frame
-// Patch for WHQL only, which did not turn on Netbios but use IPX within its payload
-// Note:
-// _pData & _DataSize may be altered (remove 8-byte LLC/SNAP) by this MACRO
-// _pRemovedLLCSNAP: pointer to removed LLC/SNAP; NULL is not removed
+/* if pData has no LLC/SNAP (neither RFC1042 nor Bridge tunnel), keep it that way. */
+/* else if the received frame is LLC/SNAP-encaped IPX or APPLETALK, preserve the LLC/SNAP field */
+/* else remove the LLC/SNAP field from the result Ethernet frame */
+/* Patch for WHQL only, which did not turn on Netbios but use IPX within its payload */
+/* Note: */
+/* _pData & _DataSize may be altered (remove 8-byte LLC/SNAP) by this MACRO */
+/* _pRemovedLLCSNAP: pointer to removed LLC/SNAP; NULL is not removed */
#define CONVERT_TO_802_3(_p8023hdr, _pDA, _pSA, _pData, _DataSize, _pRemovedLLCSNAP) \
{ \
char LLC_Len[2]; \
@@ -430,9 +430,9 @@ typedef struct _RTMP_SCATTER_GATHER_LIST {
} \
}
-// Enqueue this frame to MLME engine
-// We need to enqueue the whole frame because MLME need to pass data type
-// information from 802.11 header
+/* Enqueue this frame to MLME engine */
+/* We need to enqueue the whole frame because MLME need to pass data type */
+/* information from 802.11 header */
#ifdef RTMP_MAC_PCI
#define REPORT_MGMT_FRAME_TO_MLME(_pAd, Wcid, _pFrame, _FrameSize, _Rssi0, _Rssi1, _Rssi2, _PlcpSignal) \
{ \
@@ -441,21 +441,21 @@ typedef struct _RTMP_SCATTER_GATHER_LIST {
RTMP_IO_READ32(_pAd, TSF_TIMER_DW0, &Low32TSF); \
MlmeEnqueueForRecv(_pAd, Wcid, High32TSF, Low32TSF, (UCHAR)_Rssi0, (UCHAR)_Rssi1,(UCHAR)_Rssi2,_FrameSize, _pFrame, (UCHAR)_PlcpSignal); \
}
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
#ifdef RTMP_MAC_USB
#define REPORT_MGMT_FRAME_TO_MLME(_pAd, Wcid, _pFrame, _FrameSize, _Rssi0, _Rssi1, _Rssi2, _PlcpSignal) \
{ \
UINT32 High32TSF=0, Low32TSF=0; \
MlmeEnqueueForRecv(_pAd, Wcid, High32TSF, Low32TSF, (UCHAR)_Rssi0, (UCHAR)_Rssi1,(UCHAR)_Rssi2,_FrameSize, _pFrame, (UCHAR)_PlcpSignal); \
}
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
#define MAC_ADDR_EQUAL(pAddr1,pAddr2) RTMPEqualMemory((PVOID)(pAddr1), (PVOID)(pAddr2), MAC_ADDR_LEN)
#define SSID_EQUAL(ssid1, len1, ssid2, len2) ((len1==len2) && (RTMPEqualMemory(ssid1, ssid2, len1)))
-//
-// Check if it is Japan W53(ch52,56,60,64) channel.
-//
+/* */
+/* Check if it is Japan W53(ch52,56,60,64) channel. */
+/* */
#define JapanChannelCheck(channel) ((channel == 52) || (channel == 56) || (channel == 60) || (channel == 64))
#define STA_EXTRA_SETTING(_pAd)
@@ -472,67 +472,67 @@ typedef struct _RTMP_SCATTER_GATHER_LIST {
STA_EXTRA_SETTING(_pAd); \
}
-//
-// Data buffer for DMA operation, the buffer must be contiguous physical memory
-// Both DMA to / from CPU use the same structure.
-//
+/* */
+/* Data buffer for DMA operation, the buffer must be contiguous physical memory */
+/* Both DMA to / from CPU use the same structure. */
+/* */
typedef struct _RTMP_DMABUF {
ULONG AllocSize;
- PVOID AllocVa; // TxBuf virtual address
- NDIS_PHYSICAL_ADDRESS AllocPa; // TxBuf physical address
+ PVOID AllocVa; /* TxBuf virtual address */
+ NDIS_PHYSICAL_ADDRESS AllocPa; /* TxBuf physical address */
} RTMP_DMABUF, *PRTMP_DMABUF;
-//
-// Control block (Descriptor) for all ring descriptor DMA operation, buffer must be
-// contiguous physical memory. NDIS_PACKET stored the binding Rx packet descriptor
-// which won't be released, driver has to wait until upper layer return the packet
-// before giveing up this rx ring descriptor to ASIC. NDIS_BUFFER is assocaited pair
-// to describe the packet buffer. For Tx, NDIS_PACKET stored the tx packet descriptor
-// which driver should ACK upper layer when the tx is physically done or failed.
-//
+/* */
+/* Control block (Descriptor) for all ring descriptor DMA operation, buffer must be */
+/* contiguous physical memory. NDIS_PACKET stored the binding Rx packet descriptor */
+/* which won't be released, driver has to wait until upper layer return the packet */
+/* before giveing up this rx ring descriptor to ASIC. NDIS_BUFFER is assocaited pair */
+/* to describe the packet buffer. For Tx, NDIS_PACKET stored the tx packet descriptor */
+/* which driver should ACK upper layer when the tx is physically done or failed. */
+/* */
typedef struct _RTMP_DMACB {
- ULONG AllocSize; // Control block size
- PVOID AllocVa; // Control block virtual address
- NDIS_PHYSICAL_ADDRESS AllocPa; // Control block physical address
+ ULONG AllocSize; /* Control block size */
+ PVOID AllocVa; /* Control block virtual address */
+ NDIS_PHYSICAL_ADDRESS AllocPa; /* Control block physical address */
PNDIS_PACKET pNdisPacket;
PNDIS_PACKET pNextNdisPacket;
- RTMP_DMABUF DmaBuf; // Associated DMA buffer structure
+ RTMP_DMABUF DmaBuf; /* Associated DMA buffer structure */
} RTMP_DMACB, *PRTMP_DMACB;
typedef struct _RTMP_TX_RING {
RTMP_DMACB Cell[TX_RING_SIZE];
UINT32 TxCpuIdx;
UINT32 TxDmaIdx;
- UINT32 TxSwFreeIdx; // software next free tx index
+ UINT32 TxSwFreeIdx; /* software next free tx index */
} RTMP_TX_RING, *PRTMP_TX_RING;
typedef struct _RTMP_RX_RING {
RTMP_DMACB Cell[RX_RING_SIZE];
UINT32 RxCpuIdx;
UINT32 RxDmaIdx;
- INT32 RxSwReadIdx; // software next read index
+ INT32 RxSwReadIdx; /* software next read index */
} RTMP_RX_RING, *PRTMP_RX_RING;
typedef struct _RTMP_MGMT_RING {
RTMP_DMACB Cell[MGMT_RING_SIZE];
UINT32 TxCpuIdx;
UINT32 TxDmaIdx;
- UINT32 TxSwFreeIdx; // software next free tx index
+ UINT32 TxSwFreeIdx; /* software next free tx index */
} RTMP_MGMT_RING, *PRTMP_MGMT_RING;
-//
-// Statistic counter structure
-//
+/* */
+/* Statistic counter structure */
+/* */
typedef struct _COUNTER_802_3 {
- // General Stats
+ /* General Stats */
ULONG GoodTransmits;
ULONG GoodReceives;
ULONG TxErrors;
ULONG RxErrors;
ULONG RxNoBuffer;
- // Ethernet Stats
+ /* Ethernet Stats */
ULONG RcvAlignmentErrors;
ULONG OneCollision;
ULONG MoreCollisions;
@@ -557,8 +557,8 @@ typedef struct _COUNTER_802_11 {
} COUNTER_802_11, *PCOUNTER_802_11;
typedef struct _COUNTER_RALINK {
- ULONG TransmittedByteCount; // both successful and failure, used to calculate TX throughput
- ULONG ReceivedByteCount; // both CRC okay and CRC error, used to calculate RX throughput
+ ULONG TransmittedByteCount; /* both successful and failure, used to calculate TX throughput */
+ ULONG ReceivedByteCount; /* both CRC okay and CRC error, used to calculate RX throughput */
ULONG BeenDisassociatedCount;
ULONG BadCQIAutoRecoveryCount;
ULONG PoorCQIRoamingCount;
@@ -580,17 +580,17 @@ typedef struct _COUNTER_RALINK {
UINT32 OneSecReceivedByteCount;
UINT32 OneSecFrameDuplicateCount;
- UINT32 OneSecTransmittedByteCount; // both successful and failure, used to calculate TX throughput
+ UINT32 OneSecTransmittedByteCount; /* both successful and failure, used to calculate TX throughput */
UINT32 OneSecTxNoRetryOkCount;
UINT32 OneSecTxRetryOkCount;
UINT32 OneSecTxFailCount;
- UINT32 OneSecFalseCCACnt; // CCA error count, for debug purpose, might move to global counter
- UINT32 OneSecRxOkCnt; // RX without error
- UINT32 OneSecRxOkDataCnt; // unicast-to-me DATA frame count
- UINT32 OneSecRxFcsErrCnt; // CRC error
+ UINT32 OneSecFalseCCACnt; /* CCA error count, for debug purpose, might move to global counter */
+ UINT32 OneSecRxOkCnt; /* RX without error */
+ UINT32 OneSecRxOkDataCnt; /* unicast-to-me DATA frame count */
+ UINT32 OneSecRxFcsErrCnt; /* CRC error */
UINT32 OneSecBeaconSentCnt;
- UINT32 LastOneSecTotalTxCount; // OneSecTxNoRetryOkCount + OneSecTxRetryOkCount + OneSecTxFailCount
- UINT32 LastOneSecRxOkDataCnt; // OneSecRxOkDataCnt
+ UINT32 LastOneSecTotalTxCount; /* OneSecTxNoRetryOkCount + OneSecTxRetryOkCount + OneSecTxFailCount */
+ UINT32 LastOneSecRxOkDataCnt; /* OneSecRxOkDataCnt */
ULONG DuplicateRcv;
ULONG TxAggCount;
ULONG TxNonAggCount;
@@ -622,15 +622,15 @@ typedef struct _COUNTER_RALINK {
} COUNTER_RALINK, *PCOUNTER_RALINK;
typedef struct _COUNTER_DRS {
- // to record the each TX rate's quality. 0 is best, the bigger the worse.
+ /* to record the each TX rate's quality. 0 is best, the bigger the worse. */
USHORT TxQuality[MAX_STEP_OF_TX_RATE_SWITCH];
UCHAR PER[MAX_STEP_OF_TX_RATE_SWITCH];
- UCHAR TxRateUpPenalty; // extra # of second penalty due to last unstable condition
- ULONG CurrTxRateStableTime; // # of second in current TX rate
+ UCHAR TxRateUpPenalty; /* extra # of second penalty due to last unstable condition */
+ ULONG CurrTxRateStableTime; /* # of second in current TX rate */
BOOLEAN fNoisyEnvironment;
BOOLEAN fLastSecAccordingRSSI;
- UCHAR LastSecTxRateChangeAction; // 0: no change, 1:rate UP, 2:rate down
- UCHAR LastTimeTxRateChangeAction; //Keep last time value of LastSecTxRateChangeAction
+ UCHAR LastSecTxRateChangeAction; /* 0: no change, 1:rate UP, 2:rate down */
+ UCHAR LastTimeTxRateChangeAction; /*Keep last time value of LastSecTxRateChangeAction */
ULONG LastTxOkCount;
} COUNTER_DRS, *PCOUNTER_DRS;
@@ -638,22 +638,22 @@ typedef struct _COUNTER_DRS {
* security key related data structure
**************************************************************************/
typedef struct _CIPHER_KEY {
- UCHAR Key[16]; // right now we implement 4 keys, 128 bits max
- UCHAR RxMic[8]; // make alignment
+ UCHAR Key[16]; /* right now we implement 4 keys, 128 bits max */
+ UCHAR RxMic[8]; /* make alignment */
UCHAR TxMic[8];
- UCHAR TxTsc[6]; // 48bit TSC value
- UCHAR RxTsc[6]; // 48bit TSC value
- UCHAR CipherAlg; // 0-none, 1:WEP64, 2:WEP128, 3:TKIP, 4:AES, 5:CKIP64, 6:CKIP128
+ UCHAR TxTsc[6]; /* 48bit TSC value */
+ UCHAR RxTsc[6]; /* 48bit TSC value */
+ UCHAR CipherAlg; /* 0-none, 1:WEP64, 2:WEP128, 3:TKIP, 4:AES, 5:CKIP64, 6:CKIP128 */
UCHAR KeyLen;
UCHAR BssId[6];
- // Key length for each key, 0: entry is invalid
- UCHAR Type; // Indicate Pairwise/Group when reporting MIC error
+ /* Key length for each key, 0: entry is invalid */
+ UCHAR Type; /* Indicate Pairwise/Group when reporting MIC error */
} CIPHER_KEY, *PCIPHER_KEY;
-// structure to define WPA Group Key Rekey Interval
+/* structure to define WPA Group Key Rekey Interval */
typedef struct PACKED _RT_802_11_WPA_REKEY {
- ULONG ReKeyMethod; // mechanism for rekeying: 0:disable, 1: time-based, 2: packet-based
- ULONG ReKeyInterval; // time-based: seconds, packet-based: kilo-packets
+ ULONG ReKeyMethod; /* mechanism for rekeying: 0:disable, 1: time-based, 2: packet-based */
+ ULONG ReKeyInterval; /* time-based: seconds, packet-based: kilo-packets */
} RT_WPA_REKEY, *PRT_WPA_REKEY, RT_802_11_WPA_REKEY, *PRT_802_11_WPA_REKEY;
#ifdef RTMP_MAC_USB
@@ -661,26 +661,26 @@ typedef struct PACKED _RT_802_11_WPA_REKEY {
* RTUSB I/O related data structure
**************************************************************************/
typedef struct _RT_SET_ASIC_WCID {
- ULONG WCID; // mechanism for rekeying: 0:disable, 1: time-based, 2: packet-based
- ULONG SetTid; // time-based: seconds, packet-based: kilo-packets
- ULONG DeleteTid; // time-based: seconds, packet-based: kilo-packets
- UCHAR Addr[MAC_ADDR_LEN]; // avoid in interrupt when write key
+ ULONG WCID; /* mechanism for rekeying: 0:disable, 1: time-based, 2: packet-based */
+ ULONG SetTid; /* time-based: seconds, packet-based: kilo-packets */
+ ULONG DeleteTid; /* time-based: seconds, packet-based: kilo-packets */
+ UCHAR Addr[MAC_ADDR_LEN]; /* avoid in interrupt when write key */
} RT_SET_ASIC_WCID, *PRT_SET_ASIC_WCID;
typedef struct _RT_SET_ASIC_WCID_ATTRI {
- ULONG WCID; // mechanism for rekeying: 0:disable, 1: time-based, 2: packet-based
- ULONG Cipher; // ASIC Cipher definition
+ ULONG WCID; /* mechanism for rekeying: 0:disable, 1: time-based, 2: packet-based */
+ ULONG Cipher; /* ASIC Cipher definition */
UCHAR Addr[ETH_LENGTH_OF_ADDRESS];
} RT_SET_ASIC_WCID_ATTRI, *PRT_SET_ASIC_WCID_ATTRI;
-// for USB interface, avoid in interrupt when write key
+/* for USB interface, avoid in interrupt when write key */
typedef struct RT_ADD_PAIRWISE_KEY_ENTRY {
UCHAR MacAddr[6];
- USHORT MacTabMatchWCID; // ASIC
+ USHORT MacTabMatchWCID; /* ASIC */
CIPHER_KEY CipherKey;
} RT_ADD_PAIRWISE_KEY_ENTRY, *PRT_ADD_PAIRWISE_KEY_ENTRY;
-// Cipher suite type for mixed mode group cipher, P802.11i-2004
+/* Cipher suite type for mixed mode group cipher, P802.11i-2004 */
typedef enum _RT_802_11_CIPHER_SUITE_TYPE {
Cipher_Type_NONE,
Cipher_Type_WEP40,
@@ -689,14 +689,14 @@ typedef enum _RT_802_11_CIPHER_SUITE_TYPE {
Cipher_Type_CCMP,
Cipher_Type_WEP104
} RT_802_11_CIPHER_SUITE_TYPE, *PRT_802_11_CIPHER_SUITE_TYPE;
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
typedef struct {
UCHAR Addr[MAC_ADDR_LEN];
- UCHAR ErrorCode[2]; //00 01-Invalid authentication type
- //00 02-Authentication timeout
- //00 03-Challenge from AP failed
- //00 04-Challenge to AP failed
+ UCHAR ErrorCode[2]; /*00 01-Invalid authentication type */
+ /*00 02-Authentication timeout */
+ /*00 03-Challenge from AP failed */
+ /*00 04-Challenge to AP failed */
BOOLEAN Reported;
} ROGUEAP_ENTRY, *PROGUEAP_ENTRY;
@@ -705,23 +705,23 @@ typedef struct {
ROGUEAP_ENTRY RogueApEntry[MAX_LEN_OF_BSS_TABLE];
} ROGUEAP_TABLE, *PROGUEAP_TABLE;
-//
-// Cisco IAPP format
-//
+/* */
+/* Cisco IAPP format */
+/* */
typedef struct _CISCO_IAPP_CONTENT_ {
- USHORT Length; //IAPP Length
- UCHAR MessageType; //IAPP type
- UCHAR FunctionCode; //IAPP function type
+ USHORT Length; /*IAPP Length */
+ UCHAR MessageType; /*IAPP type */
+ UCHAR FunctionCode; /*IAPP function type */
UCHAR DestinaionMAC[MAC_ADDR_LEN];
UCHAR SourceMAC[MAC_ADDR_LEN];
- USHORT Tag; //Tag(element IE) - Adjacent AP report
- USHORT TagLength; //Length of element not including 4 byte header
- UCHAR OUI[4]; //0x00, 0x40, 0x96, 0x00
- UCHAR PreviousAP[MAC_ADDR_LEN]; //MAC Address of access point
+ USHORT Tag; /*Tag(element IE) - Adjacent AP report */
+ USHORT TagLength; /*Length of element not including 4 byte header */
+ UCHAR OUI[4]; /*0x00, 0x40, 0x96, 0x00 */
+ UCHAR PreviousAP[MAC_ADDR_LEN]; /*MAC Address of access point */
USHORT Channel;
USHORT SsidLen;
UCHAR Ssid[MAX_LEN_OF_SSID];
- USHORT Seconds; //Seconds that the client has been disassociated.
+ USHORT Seconds; /*Seconds that the client has been disassociated. */
} CISCO_IAPP_CONTENT, *PCISCO_IAPP_CONTENT;
/*
@@ -732,55 +732,55 @@ typedef struct _FRAGMENT_FRAME {
ULONG RxSize;
USHORT Sequence;
USHORT LastFrag;
- ULONG Flags; // Some extra frame information. bit 0: LLC presented
+ ULONG Flags; /* Some extra frame information. bit 0: LLC presented */
} FRAGMENT_FRAME, *PFRAGMENT_FRAME;
-//
-// Packet information for NdisQueryPacket
-//
+/* */
+/* Packet information for NdisQueryPacket */
+/* */
typedef struct _PACKET_INFO {
- UINT PhysicalBufferCount; // Physical breaks of buffer descripor chained
- UINT BufferCount; // Number of Buffer descriptor chained
- UINT TotalPacketLength; // Self explained
- PNDIS_BUFFER pFirstBuffer; // Pointer to first buffer descriptor
+ UINT PhysicalBufferCount; /* Physical breaks of buffer descripor chained */
+ UINT BufferCount; /* Number of Buffer descriptor chained */
+ UINT TotalPacketLength; /* Self explained */
+ PNDIS_BUFFER pFirstBuffer; /* Pointer to first buffer descriptor */
} PACKET_INFO, *PPACKET_INFO;
-//
-// Arcfour Structure Added by PaulWu
-//
+/* */
+/* Arcfour Structure Added by PaulWu */
+/* */
typedef struct _ARCFOUR {
UINT X;
UINT Y;
UCHAR STATE[256];
} ARCFOURCONTEXT, *PARCFOURCONTEXT;
-//
-// Tkip Key structure which RC4 key & MIC calculation
-//
+/* */
+/* Tkip Key structure which RC4 key & MIC calculation */
+/* */
typedef struct _TKIP_KEY_INFO {
- UINT nBytesInM; // # bytes in M for MICKEY
+ UINT nBytesInM; /* # bytes in M for MICKEY */
ULONG IV16;
ULONG IV32;
- ULONG K0; // for MICKEY Low
- ULONG K1; // for MICKEY Hig
- ULONG L; // Current state for MICKEY
- ULONG R; // Current state for MICKEY
- ULONG M; // Message accumulator for MICKEY
+ ULONG K0; /* for MICKEY Low */
+ ULONG K1; /* for MICKEY Hig */
+ ULONG L; /* Current state for MICKEY */
+ ULONG R; /* Current state for MICKEY */
+ ULONG M; /* Message accumulator for MICKEY */
UCHAR RC4KEY[16];
UCHAR MIC[8];
} TKIP_KEY_INFO, *PTKIP_KEY_INFO;
-//
-// Private / Misc data, counters for driver internal use
-//
+/* */
+/* Private / Misc data, counters for driver internal use */
+/* */
typedef struct __PRIVATE_STRUC {
- UINT SystemResetCnt; // System reset counter
- UINT TxRingFullCnt; // Tx ring full occurrance number
- UINT PhyRxErrCnt; // PHY Rx error count, for debug purpose, might move to global counter
- // Variables for WEP encryption / decryption in rtmp_wep.c
+ UINT SystemResetCnt; /* System reset counter */
+ UINT TxRingFullCnt; /* Tx ring full occurrance number */
+ UINT PhyRxErrCnt; /* PHY Rx error count, for debug purpose, might move to global counter */
+ /* Variables for WEP encryption / decryption in rtmp_wep.c */
UINT FCSCRC32;
ARCFOURCONTEXT WEPCONTEXT;
- // Tkip stuff
+ /* Tkip stuff */
TKIP_KEY_INFO Tx;
TKIP_KEY_INFO Rx;
} PRIVATE_STRUC, *PPRIVATE_STRUC;
@@ -788,19 +788,19 @@ typedef struct __PRIVATE_STRUC {
/***************************************************************************
* Channel and BBP related data structures
**************************************************************************/
-// structure to tune BBP R66 (BBP TUNING)
+/* structure to tune BBP R66 (BBP TUNING) */
typedef struct _BBP_R66_TUNING {
BOOLEAN bEnable;
- USHORT FalseCcaLowerThreshold; // default 100
- USHORT FalseCcaUpperThreshold; // default 512
+ USHORT FalseCcaLowerThreshold; /* default 100 */
+ USHORT FalseCcaUpperThreshold; /* default 512 */
UCHAR R66Delta;
UCHAR R66CurrentValue;
- BOOLEAN R66LowerUpperSelect; //Before LinkUp, Used LowerBound or UpperBound as R66 value.
+ BOOLEAN R66LowerUpperSelect; /*Before LinkUp, Used LowerBound or UpperBound as R66 value. */
} BBP_R66_TUNING, *PBBP_R66_TUNING;
-// structure to store channel TX power
+/* structure to store channel TX power */
typedef struct _CHANNEL_TX_POWER {
- USHORT RemainingTimeForUse; //unit: sec
+ USHORT RemainingTimeForUse; /*unit: sec */
UCHAR Channel;
CHAR Power;
CHAR Power2;
@@ -808,26 +808,26 @@ typedef struct _CHANNEL_TX_POWER {
UCHAR DfsReq;
} CHANNEL_TX_POWER, *PCHANNEL_TX_POWER;
-// structure to store 802.11j channel TX power
+/* structure to store 802.11j channel TX power */
typedef struct _CHANNEL_11J_TX_POWER {
UCHAR Channel;
- UCHAR BW; // BW_10 or BW_20
+ UCHAR BW; /* BW_10 or BW_20 */
CHAR Power;
CHAR Power2;
- USHORT RemainingTimeForUse; //unit: sec
+ USHORT RemainingTimeForUse; /*unit: sec */
} CHANNEL_11J_TX_POWER, *PCHANNEL_11J_TX_POWER;
typedef struct _SOFT_RX_ANT_DIVERSITY_STRUCT {
- UCHAR EvaluatePeriod; // 0:not evalute status, 1: evaluate status, 2: switching status
+ UCHAR EvaluatePeriod; /* 0:not evalute status, 1: evaluate status, 2: switching status */
UCHAR EvaluateStableCnt;
- UCHAR Pair1PrimaryRxAnt; // 0:Ant-E1, 1:Ant-E2
- UCHAR Pair1SecondaryRxAnt; // 0:Ant-E1, 1:Ant-E2
- UCHAR Pair2PrimaryRxAnt; // 0:Ant-E3, 1:Ant-E4
- UCHAR Pair2SecondaryRxAnt; // 0:Ant-E3, 1:Ant-E4
- SHORT Pair1AvgRssi[2]; // AvgRssi[0]:E1, AvgRssi[1]:E2
- SHORT Pair2AvgRssi[2]; // AvgRssi[0]:E3, AvgRssi[1]:E4
- SHORT Pair1LastAvgRssi; //
- SHORT Pair2LastAvgRssi; //
+ UCHAR Pair1PrimaryRxAnt; /* 0:Ant-E1, 1:Ant-E2 */
+ UCHAR Pair1SecondaryRxAnt; /* 0:Ant-E1, 1:Ant-E2 */
+ UCHAR Pair2PrimaryRxAnt; /* 0:Ant-E3, 1:Ant-E4 */
+ UCHAR Pair2SecondaryRxAnt; /* 0:Ant-E3, 1:Ant-E4 */
+ SHORT Pair1AvgRssi[2]; /* AvgRssi[0]:E1, AvgRssi[1]:E2 */
+ SHORT Pair2AvgRssi[2]; /* AvgRssi[0]:E3, AvgRssi[1]:E4 */
+ SHORT Pair1LastAvgRssi; /* */
+ SHORT Pair2LastAvgRssi; /* */
ULONG RcvPktNumWhenEvaluate;
BOOLEAN FirstPktArrivedWhenEvaluate;
RALINK_TIMER_STRUCT RxAntDiversityTimer;
@@ -837,19 +837,19 @@ typedef struct _SOFT_RX_ANT_DIVERSITY_STRUCT {
* structure for radar detection and channel switch
**************************************************************************/
typedef struct _RADAR_DETECT_STRUCT {
- //BOOLEAN IEEE80211H; // 0: disable, 1: enable IEEE802.11h
- UCHAR CSCount; //Channel switch counter
- UCHAR CSPeriod; //Channel switch period (beacon count)
- UCHAR RDCount; //Radar detection counter
- UCHAR RDMode; //Radar Detection mode
- UCHAR RDDurRegion; //Radar detection duration region
+ /*BOOLEAN IEEE80211H; // 0: disable, 1: enable IEEE802.11h */
+ UCHAR CSCount; /*Channel switch counter */
+ UCHAR CSPeriod; /*Channel switch period (beacon count) */
+ UCHAR RDCount; /*Radar detection counter */
+ UCHAR RDMode; /*Radar Detection mode */
+ UCHAR RDDurRegion; /*Radar detection duration region */
UCHAR BBPR16;
UCHAR BBPR17;
UCHAR BBPR18;
UCHAR BBPR21;
UCHAR BBPR22;
UCHAR BBPR64;
- ULONG InServiceMonitorCount; // unit: sec
+ ULONG InServiceMonitorCount; /* unit: sec */
UINT8 DfsSessionTime;
BOOLEAN bFastDfs;
UINT8 ChMovingTime;
@@ -863,25 +863,25 @@ typedef enum _ABGBAND_STATE_ {
} ABGBAND_STATE;
#ifdef RTMP_MAC_PCI
-// Power save method control
+/* Power save method control */
typedef union _PS_CONTROL {
struct {
- ULONG EnablePSinIdle:1; // Enable radio off when not connect to AP. radio on only when sitesurvey,
- ULONG EnableNewPS:1; // Enable new Chip power save fucntion . New method can only be applied in chip version after 2872. and PCIe.
- ULONG rt30xxPowerMode:2; // Power Level Mode for rt30xx chip
- ULONG rt30xxFollowHostASPM:1; // Card Follows Host's setting for rt30xx chip.
- ULONG rt30xxForceASPMTest:1; // Force enable L1 for rt30xx chip. This has higher priority than rt30xxFollowHostASPM Mode.
- ULONG rsv:26; // Radio Measurement Enable
+ ULONG EnablePSinIdle:1; /* Enable radio off when not connect to AP. radio on only when sitesurvey, */
+ ULONG EnableNewPS:1; /* Enable new Chip power save fucntion . New method can only be applied in chip version after 2872. and PCIe. */
+ ULONG rt30xxPowerMode:2; /* Power Level Mode for rt30xx chip */
+ ULONG rt30xxFollowHostASPM:1; /* Card Follows Host's setting for rt30xx chip. */
+ ULONG rt30xxForceASPMTest:1; /* Force enable L1 for rt30xx chip. This has higher priority than rt30xxFollowHostASPM Mode. */
+ ULONG rsv:26; /* Radio Measurement Enable */
} field;
ULONG word;
} PS_CONTROL, *PPS_CONTROL;
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
/***************************************************************************
* structure for MLME state machine
**************************************************************************/
typedef struct _MLME_STRUCT {
- // STA state machines
+ /* STA state machines */
STATE_MACHINE CntlMachine;
STATE_MACHINE AssocMachine;
STATE_MACHINE AuthMachine;
@@ -894,15 +894,15 @@ typedef struct _MLME_STRUCT {
STATE_MACHINE_FUNC AuthRspFunc[AUTH_RSP_FUNC_SIZE];
STATE_MACHINE_FUNC SyncFunc[SYNC_FUNC_SIZE];
STATE_MACHINE_FUNC ActFunc[ACT_FUNC_SIZE];
- // Action
+ /* Action */
STATE_MACHINE ActMachine;
- // common WPA state machine
+ /* common WPA state machine */
STATE_MACHINE WpaMachine;
STATE_MACHINE_FUNC WpaFunc[WPA_FUNC_SIZE];
- ULONG ChannelQuality; // 0..100, Channel Quality Indication for Roaming
- ULONG Now32; // latch the value of NdisGetSystemUpTime()
+ ULONG ChannelQuality; /* 0..100, Channel Quality Indication for Roaming */
+ ULONG Now32; /* latch the value of NdisGetSystemUpTime() */
ULONG LastSendNULLpsmTime;
BOOLEAN bRunning;
@@ -919,7 +919,7 @@ typedef struct _MLME_STRUCT {
UCHAR bPsPollTimerRunning;
RALINK_TIMER_STRUCT PsPollTimer;
RALINK_TIMER_STRUCT RadioOnOffTimer;
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
ULONG PeriodicRound;
ULONG OneSecPeriodicRound;
@@ -931,12 +931,12 @@ typedef struct _MLME_STRUCT {
#ifdef RT30xx
UCHAR CaliBW40RfR24;
UCHAR CaliBW20RfR24;
-#endif // RT30xx //
+#endif /* RT30xx // */
#ifdef RTMP_MAC_USB
RALINK_TIMER_STRUCT AutoWakeupTimer;
BOOLEAN AutoWakeupTimerRunning;
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
} MLME_STRUCT, *PMLME_STRUCT;
/***************************************************************************
@@ -979,7 +979,7 @@ typedef struct _BA_ORI_ENTRY {
UCHAR TID;
UCHAR BAWinSize;
UCHAR Token;
-// Sequence is to fill every outgoing QoS DATA frame's sequence field in 802.11 header.
+/* Sequence is to fill every outgoing QoS DATA frame's sequence field in 802.11 header. */
USHORT Sequence;
USHORT TimeOutValue;
ORI_BLOCKACK_STATUS ORI_BA_Status;
@@ -990,47 +990,47 @@ typedef struct _BA_ORI_ENTRY {
typedef struct _BA_REC_ENTRY {
UCHAR Wcid;
UCHAR TID;
- UCHAR BAWinSize; // 7.3.1.14. each buffer is capable of holding a max AMSDU or MSDU.
- //UCHAR NumOfRxPkt;
- //UCHAR Curindidx; // the head in the RX reordering buffer
+ UCHAR BAWinSize; /* 7.3.1.14. each buffer is capable of holding a max AMSDU or MSDU. */
+ /*UCHAR NumOfRxPkt; */
+ /*UCHAR Curindidx; // the head in the RX reordering buffer */
USHORT LastIndSeq;
-// USHORT LastIndSeqAtTimer;
+/* USHORT LastIndSeqAtTimer; */
USHORT TimeOutValue;
RALINK_TIMER_STRUCT RECBATimer;
ULONG LastIndSeqAtTimer;
ULONG nDropPacket;
ULONG rcvSeq;
REC_BLOCKACK_STATUS REC_BA_Status;
-// UCHAR RxBufIdxUsed;
- // corresponding virtual address for RX reordering packet storage.
- //RTMP_REORDERDMABUF MAP_RXBuf[MAX_RX_REORDERBUF];
- NDIS_SPIN_LOCK RxReRingLock; // Rx Ring spinlock
-// struct _BA_REC_ENTRY *pNext;
+/* UCHAR RxBufIdxUsed; */
+ /* corresponding virtual address for RX reordering packet storage. */
+ /*RTMP_REORDERDMABUF MAP_RXBuf[MAX_RX_REORDERBUF]; */
+ NDIS_SPIN_LOCK RxReRingLock; /* Rx Ring spinlock */
+/* struct _BA_REC_ENTRY *pNext; */
PVOID pAdapter;
struct reordering_list list;
} BA_REC_ENTRY, *PBA_REC_ENTRY;
typedef struct {
- ULONG numAsRecipient; // I am recipient of numAsRecipient clients. These client are in the BARecEntry[]
- ULONG numAsOriginator; // I am originator of numAsOriginator clients. These clients are in the BAOriEntry[]
- ULONG numDoneOriginator; // count Done Originator sessions
+ ULONG numAsRecipient; /* I am recipient of numAsRecipient clients. These client are in the BARecEntry[] */
+ ULONG numAsOriginator; /* I am originator of numAsOriginator clients. These clients are in the BAOriEntry[] */
+ ULONG numDoneOriginator; /* count Done Originator sessions */
BA_ORI_ENTRY BAOriEntry[MAX_LEN_OF_BA_ORI_TABLE];
BA_REC_ENTRY BARecEntry[MAX_LEN_OF_BA_REC_TABLE];
} BA_TABLE, *PBA_TABLE;
-//For QureyBATableOID use;
+/*For QureyBATableOID use; */
typedef struct PACKED _OID_BA_REC_ENTRY {
UCHAR MACAddr[MAC_ADDR_LEN];
- UCHAR BaBitmap; // if (BaBitmap&(1<<TID)), this session with{MACAddr, TID}exists, so read BufSize[TID] for BufferSize
+ UCHAR BaBitmap; /* if (BaBitmap&(1<<TID)), this session with{MACAddr, TID}exists, so read BufSize[TID] for BufferSize */
UCHAR rsv;
UCHAR BufSize[8];
REC_BLOCKACK_STATUS REC_BA_Status[8];
} OID_BA_REC_ENTRY, *POID_BA_REC_ENTRY;
-//For QureyBATableOID use;
+/*For QureyBATableOID use; */
typedef struct PACKED _OID_BA_ORI_ENTRY {
UCHAR MACAddr[MAC_ADDR_LEN];
- UCHAR BaBitmap; // if (BaBitmap&(1<<TID)), this session with{MACAddr, TID}exists, so read BufSize[TID] for BufferSize, read ORI_BA_Status[TID] for status
+ UCHAR BaBitmap; /* if (BaBitmap&(1<<TID)), this session with{MACAddr, TID}exists, so read BufSize[TID] for BufferSize, read ORI_BA_Status[TID] for status */
UCHAR rsv;
UCHAR BufSize[8];
ORI_BLOCKACK_STATUS ORI_BA_Status[8];
@@ -1039,22 +1039,22 @@ typedef struct PACKED _OID_BA_ORI_ENTRY {
typedef struct _QUERYBA_TABLE {
OID_BA_ORI_ENTRY BAOriEntry[32];
OID_BA_REC_ENTRY BARecEntry[32];
- UCHAR OriNum; // Number of below BAOriEntry
- UCHAR RecNum; // Number of below BARecEntry
+ UCHAR OriNum; /* Number of below BAOriEntry */
+ UCHAR RecNum; /* Number of below BARecEntry */
} QUERYBA_TABLE, *PQUERYBA_TABLE;
typedef union _BACAP_STRUC {
struct {
UINT32 RxBAWinLimit:8;
UINT32 TxBAWinLimit:8;
- UINT32 AutoBA:1; // automatically BA
- UINT32 Policy:2; // 0: DELAY_BA 1:IMMED_BA (//BA Policy subfiled value in ADDBA frame) 2:BA-not use
+ UINT32 AutoBA:1; /* automatically BA */
+ UINT32 Policy:2; /* 0: DELAY_BA 1:IMMED_BA (//BA Policy subfiled value in ADDBA frame) 2:BA-not use */
UINT32 MpduDensity:3;
- UINT32 AmsduEnable:1; //Enable AMSDU transmisstion
- UINT32 AmsduSize:1; // 0:3839, 1:7935 bytes. UINT MSDUSizeToBytes[] = { 3839, 7935};
- UINT32 MMPSmode:2; // MIMO power save more, 0:static, 1:dynamic, 2:rsv, 3:mimo enable
- UINT32 bHtAdhoc:1; // adhoc can use ht rate.
- UINT32 b2040CoexistScanSup:1; //As Sta, support do 2040 coexistence scan for AP. As Ap, support monitor trigger event to check if can use BW 40MHz.
+ UINT32 AmsduEnable:1; /*Enable AMSDU transmisstion */
+ UINT32 AmsduSize:1; /* 0:3839, 1:7935 bytes. UINT MSDUSizeToBytes[] = { 3839, 7935}; */
+ UINT32 MMPSmode:2; /* MIMO power save more, 0:static, 1:dynamic, 2:rsv, 3:mimo enable */
+ UINT32 bHtAdhoc:1; /* adhoc can use ht rate. */
+ UINT32 b2040CoexistScanSup:1; /*As Sta, support do 2040 coexistence scan for AP. As Ap, support monitor trigger event to check if can use BW 40MHz. */
UINT32:4;
} field;
UINT32 word;
@@ -1066,7 +1066,7 @@ typedef struct {
UCHAR TID;
UCHAR nMSDU;
USHORT TimeOut;
- BOOLEAN bAllTid; // If True, delete all TID for BA sessions with this MACaddr.
+ BOOLEAN bAllTid; /* If True, delete all TID for BA sessions with this MACaddr. */
} OID_ADD_BA_ENTRY, *POID_ADD_BA_ENTRY;
#define IS_HT_STA(_pMacEntry) \
@@ -1078,11 +1078,11 @@ typedef struct {
#define PEER_IS_HT_RATE(_pMacEntry) \
(_pMacEntry->HTPhyMode.field.MODE >= MODE_HTMIX)
-//This structure is for all 802.11n card InterOptibilityTest action. Reset all Num every n second. (Details see MLMEPeriodic)
+/*This structure is for all 802.11n card InterOptibilityTest action. Reset all Num every n second. (Details see MLMEPeriodic) */
typedef struct _IOT_STRUC {
UCHAR Threshold[2];
- UCHAR ReorderTimeOutNum[MAX_LEN_OF_BA_REC_TABLE]; // compare with threshold[0]
- UCHAR RefreshNum[MAX_LEN_OF_BA_REC_TABLE]; // compare with threshold[1]
+ UCHAR ReorderTimeOutNum[MAX_LEN_OF_BA_REC_TABLE]; /* compare with threshold[0] */
+ UCHAR RefreshNum[MAX_LEN_OF_BA_REC_TABLE]; /* compare with threshold[1] */
ULONG OneSecInWindowCount;
ULONG OneSecFrameDuplicateCount;
ULONG OneSecOutWindowCount;
@@ -1098,16 +1098,16 @@ typedef struct _IOT_STRUC {
BOOLEAN bToggle;
} IOT_STRUC, *PIOT_STRUC;
-// This is the registry setting for 802.11n transmit setting. Used in advanced page.
+/* This is the registry setting for 802.11n transmit setting. Used in advanced page. */
typedef union _REG_TRANSMIT_SETTING {
struct {
- //UINT32 PhyMode:4;
- //UINT32 MCS:7; // MCS
+ /*UINT32 PhyMode:4; */
+ /*UINT32 MCS:7; // MCS */
UINT32 rsv0:10;
UINT32 TxBF:1;
- UINT32 BW:1; //channel bandwidth 20MHz or 40 MHz
+ UINT32 BW:1; /*channel bandwidth 20MHz or 40 MHz */
UINT32 ShortGI:1;
- UINT32 STBC:1; //SPACE
+ UINT32 STBC:1; /*SPACE */
UINT32 TRANSNO:2;
UINT32 HTMODE:1;
UINT32 EXTCHA:2;
@@ -1118,9 +1118,9 @@ typedef union _REG_TRANSMIT_SETTING {
typedef union _DESIRED_TRANSMIT_SETTING {
struct {
- USHORT MCS:7; // MCS
+ USHORT MCS:7; /* MCS */
USHORT PhyMode:4;
- USHORT FixedTxMode:2; // If MCS isn't AUTO, fix rate in CCK, OFDM or HT mode.
+ USHORT FixedTxMode:2; /* If MCS isn't AUTO, fix rate in CCK, OFDM or HT mode. */
USHORT rsv:3;
} field;
USHORT word;
@@ -1136,11 +1136,11 @@ typedef struct _BEACON_SYNC_STRUCT_ {
UCHAR BeaconTxWI[HW_BEACON_MAX_COUNT][TXWI_SIZE];
ULONG TimIELocationInBeacon[HW_BEACON_MAX_COUNT];
ULONG CapabilityInfoLocationInBeacon[HW_BEACON_MAX_COUNT];
- BOOLEAN EnableBeacon; // trigger to enable beacon transmission.
- UCHAR BeaconBitMap; // NOTE: If the MAX_MBSSID_NUM is larger than 8, this parameter need to change.
- UCHAR DtimBitOn; // NOTE: If the MAX_MBSSID_NUM is larger than 8, this parameter need to change.
+ BOOLEAN EnableBeacon; /* trigger to enable beacon transmission. */
+ UCHAR BeaconBitMap; /* NOTE: If the MAX_MBSSID_NUM is larger than 8, this parameter need to change. */
+ UCHAR DtimBitOn; /* NOTE: If the MAX_MBSSID_NUM is larger than 8, this parameter need to change. */
} BEACON_SYNC_STRUCT;
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
/***************************************************************************
* Multiple SSID related data structures
@@ -1168,39 +1168,39 @@ typedef struct _BEACON_SYNC_STRUCT_ {
UCHAR bit_offset = wcid & 0x7; \
ad_p->ApCfg.MBSSID[apidx].TimBitmaps[tim_offset] |= BIT8[bit_offset]; }
-// configuration common to OPMODE_AP as well as OPMODE_STA
+/* configuration common to OPMODE_AP as well as OPMODE_STA */
typedef struct _COMMON_CONFIG {
BOOLEAN bCountryFlag;
UCHAR CountryCode[3];
UCHAR Geography;
- UCHAR CountryRegion; // Enum of country region, 0:FCC, 1:IC, 2:ETSI, 3:SPAIN, 4:France, 5:MKK, 6:MKK1, 7:Israel
- UCHAR CountryRegionForABand; // Enum of country region for A band
- UCHAR PhyMode; // PHY_11A, PHY_11B, PHY_11BG_MIXED, PHY_ABG_MIXED
- USHORT Dsifs; // in units of usec
- ULONG PacketFilter; // Packet filter for receiving
+ UCHAR CountryRegion; /* Enum of country region, 0:FCC, 1:IC, 2:ETSI, 3:SPAIN, 4:France, 5:MKK, 6:MKK1, 7:Israel */
+ UCHAR CountryRegionForABand; /* Enum of country region for A band */
+ UCHAR PhyMode; /* PHY_11A, PHY_11B, PHY_11BG_MIXED, PHY_ABG_MIXED */
+ USHORT Dsifs; /* in units of usec */
+ ULONG PacketFilter; /* Packet filter for receiving */
UINT8 RegulatoryClass;
- CHAR Ssid[MAX_LEN_OF_SSID]; // NOT NULL-terminated
- UCHAR SsidLen; // the actual ssid length in used
- UCHAR LastSsidLen; // the actual ssid length in used
- CHAR LastSsid[MAX_LEN_OF_SSID]; // NOT NULL-terminated
+ CHAR Ssid[MAX_LEN_OF_SSID]; /* NOT NULL-terminated */
+ UCHAR SsidLen; /* the actual ssid length in used */
+ UCHAR LastSsidLen; /* the actual ssid length in used */
+ CHAR LastSsid[MAX_LEN_OF_SSID]; /* NOT NULL-terminated */
UCHAR LastBssid[MAC_ADDR_LEN];
UCHAR Bssid[MAC_ADDR_LEN];
USHORT BeaconPeriod;
UCHAR Channel;
- UCHAR CentralChannel; // Central Channel when using 40MHz is indicating. not real channel.
+ UCHAR CentralChannel; /* Central Channel when using 40MHz is indicating. not real channel. */
UCHAR SupRate[MAX_LEN_OF_SUPPORTED_RATES];
UCHAR SupRateLen;
UCHAR ExtRate[MAX_LEN_OF_SUPPORTED_RATES];
UCHAR ExtRateLen;
- UCHAR DesireRate[MAX_LEN_OF_SUPPORTED_RATES]; // OID_802_11_DESIRED_RATES
+ UCHAR DesireRate[MAX_LEN_OF_SUPPORTED_RATES]; /* OID_802_11_DESIRED_RATES */
UCHAR MaxDesiredRate;
UCHAR ExpectedACKRate[MAX_LEN_OF_SUPPORTED_RATES];
- ULONG BasicRateBitmap; // backup basic ratebitmap
+ ULONG BasicRateBitmap; /* backup basic ratebitmap */
BOOLEAN bAPSDCapable;
BOOLEAN bInServicePeriod;
@@ -1216,83 +1216,83 @@ typedef struct _COMMON_CONFIG {
BOOLEAN bACMAPSDTr[4]; /* no use */
BOOLEAN bNeedSendTriggerFrame;
- BOOLEAN bAPSDForcePowerSave; // Force power save mode, should only use in APSD-STAUT
+ BOOLEAN bAPSDForcePowerSave; /* Force power save mode, should only use in APSD-STAUT */
ULONG TriggerTimerCount;
UCHAR MaxSPLength;
- UCHAR BBPCurrentBW; // BW_10, BW_20, BW_40
- // move to MULTISSID_STRUCT for MBSS
- //HTTRANSMIT_SETTING HTPhyMode, MaxHTPhyMode, MinHTPhyMode;// For transmit phy setting in TXWI.
- REG_TRANSMIT_SETTING RegTransmitSetting; //registry transmit setting. this is for reading registry setting only. not useful.
- //UCHAR FixedTxMode; // Fixed Tx Mode (CCK, OFDM), for HT fixed tx mode (GF, MIX) , refer to RegTransmitSetting.field.HTMode
- UCHAR TxRate; // Same value to fill in TXD. TxRate is 6-bit
- UCHAR MaxTxRate; // RATE_1, RATE_2, RATE_5_5, RATE_11
- UCHAR TxRateIndex; // Tx rate index in RateSwitchTable
- UCHAR TxRateTableSize; // Valid Tx rate table size in RateSwitchTable
- //BOOLEAN bAutoTxRateSwitch;
- UCHAR MinTxRate; // RATE_1, RATE_2, RATE_5_5, RATE_11
- UCHAR RtsRate; // RATE_xxx
- HTTRANSMIT_SETTING MlmeTransmit; // MGMT frame PHY rate setting when operatin at Ht rate.
- UCHAR MlmeRate; // RATE_xxx, used to send MLME frames
- UCHAR BasicMlmeRate; // Default Rate for sending MLME frames
-
- USHORT RtsThreshold; // in unit of BYTE
- USHORT FragmentThreshold; // in unit of BYTE
-
- UCHAR TxPower; // in unit of mW
- ULONG TxPowerPercentage; // 0~100 %
- ULONG TxPowerDefault; // keep for TxPowerPercentage
+ UCHAR BBPCurrentBW; /* BW_10, BW_20, BW_40 */
+ /* move to MULTISSID_STRUCT for MBSS */
+ /*HTTRANSMIT_SETTING HTPhyMode, MaxHTPhyMode, MinHTPhyMode;// For transmit phy setting in TXWI. */
+ REG_TRANSMIT_SETTING RegTransmitSetting; /*registry transmit setting. this is for reading registry setting only. not useful. */
+ /*UCHAR FixedTxMode; // Fixed Tx Mode (CCK, OFDM), for HT fixed tx mode (GF, MIX) , refer to RegTransmitSetting.field.HTMode */
+ UCHAR TxRate; /* Same value to fill in TXD. TxRate is 6-bit */
+ UCHAR MaxTxRate; /* RATE_1, RATE_2, RATE_5_5, RATE_11 */
+ UCHAR TxRateIndex; /* Tx rate index in RateSwitchTable */
+ UCHAR TxRateTableSize; /* Valid Tx rate table size in RateSwitchTable */
+ /*BOOLEAN bAutoTxRateSwitch; */
+ UCHAR MinTxRate; /* RATE_1, RATE_2, RATE_5_5, RATE_11 */
+ UCHAR RtsRate; /* RATE_xxx */
+ HTTRANSMIT_SETTING MlmeTransmit; /* MGMT frame PHY rate setting when operatin at Ht rate. */
+ UCHAR MlmeRate; /* RATE_xxx, used to send MLME frames */
+ UCHAR BasicMlmeRate; /* Default Rate for sending MLME frames */
+
+ USHORT RtsThreshold; /* in unit of BYTE */
+ USHORT FragmentThreshold; /* in unit of BYTE */
+
+ UCHAR TxPower; /* in unit of mW */
+ ULONG TxPowerPercentage; /* 0~100 % */
+ ULONG TxPowerDefault; /* keep for TxPowerPercentage */
UINT8 PwrConstraint;
- BACAP_STRUC BACapability; // NO USE = 0XFF ; IMMED_BA =1 ; DELAY_BA=0
- BACAP_STRUC REGBACapability; // NO USE = 0XFF ; IMMED_BA =1 ; DELAY_BA=0
+ BACAP_STRUC BACapability; /* NO USE = 0XFF ; IMMED_BA =1 ; DELAY_BA=0 */
+ BACAP_STRUC REGBACapability; /* NO USE = 0XFF ; IMMED_BA =1 ; DELAY_BA=0 */
- IOT_STRUC IOTestParm; // 802.11n InterOpbility Test Parameter;
- ULONG TxPreamble; // Rt802_11PreambleLong, Rt802_11PreambleShort, Rt802_11PreambleAuto
- BOOLEAN bUseZeroToDisableFragment; // Microsoft use 0 as disable
- ULONG UseBGProtection; // 0: auto, 1: always use, 2: always not use
- BOOLEAN bUseShortSlotTime; // 0: disable, 1 - use short slot (9us)
- BOOLEAN bEnableTxBurst; // 1: enble TX PACKET BURST (when BA is established or AP is not a legacy WMM AP), 0: disable TX PACKET BURST
- BOOLEAN bAggregationCapable; // 1: enable TX aggregation when the peer supports it
- BOOLEAN bPiggyBackCapable; // 1: enable TX piggy-back according MAC's version
- BOOLEAN bIEEE80211H; // 1: enable IEEE802.11h spec.
- ULONG DisableOLBCDetect; // 0: enable OLBC detect; 1 disable OLBC detect
+ IOT_STRUC IOTestParm; /* 802.11n InterOpbility Test Parameter; */
+ ULONG TxPreamble; /* Rt802_11PreambleLong, Rt802_11PreambleShort, Rt802_11PreambleAuto */
+ BOOLEAN bUseZeroToDisableFragment; /* Microsoft use 0 as disable */
+ ULONG UseBGProtection; /* 0: auto, 1: always use, 2: always not use */
+ BOOLEAN bUseShortSlotTime; /* 0: disable, 1 - use short slot (9us) */
+ BOOLEAN bEnableTxBurst; /* 1: enble TX PACKET BURST (when BA is established or AP is not a legacy WMM AP), 0: disable TX PACKET BURST */
+ BOOLEAN bAggregationCapable; /* 1: enable TX aggregation when the peer supports it */
+ BOOLEAN bPiggyBackCapable; /* 1: enable TX piggy-back according MAC's version */
+ BOOLEAN bIEEE80211H; /* 1: enable IEEE802.11h spec. */
+ ULONG DisableOLBCDetect; /* 0: enable OLBC detect; 1 disable OLBC detect */
BOOLEAN bRdg;
- BOOLEAN bWmmCapable; // 0:disable WMM, 1:enable WMM
- QOS_CAPABILITY_PARM APQosCapability; // QOS capability of the current associated AP
- EDCA_PARM APEdcaParm; // EDCA parameters of the current associated AP
- QBSS_LOAD_PARM APQbssLoad; // QBSS load of the current associated AP
- UCHAR AckPolicy[4]; // ACK policy of the specified AC. see ACK_xxx
- BOOLEAN bDLSCapable; // 0:disable DLS, 1:enable DLS
- // a bitmap of BOOLEAN flags. each bit represent an operation status of a particular
- // BOOLEAN control, either ON or OFF. These flags should always be accessed via
- // OPSTATUS_TEST_FLAG(), OPSTATUS_SET_FLAG(), OP_STATUS_CLEAR_FLAG() macros.
- // see fOP_STATUS_xxx in RTMP_DEF.C for detail bit definition
+ BOOLEAN bWmmCapable; /* 0:disable WMM, 1:enable WMM */
+ QOS_CAPABILITY_PARM APQosCapability; /* QOS capability of the current associated AP */
+ EDCA_PARM APEdcaParm; /* EDCA parameters of the current associated AP */
+ QBSS_LOAD_PARM APQbssLoad; /* QBSS load of the current associated AP */
+ UCHAR AckPolicy[4]; /* ACK policy of the specified AC. see ACK_xxx */
+ BOOLEAN bDLSCapable; /* 0:disable DLS, 1:enable DLS */
+ /* a bitmap of BOOLEAN flags. each bit represent an operation status of a particular */
+ /* BOOLEAN control, either ON or OFF. These flags should always be accessed via */
+ /* OPSTATUS_TEST_FLAG(), OPSTATUS_SET_FLAG(), OP_STATUS_CLEAR_FLAG() macros. */
+ /* see fOP_STATUS_xxx in RTMP_DEF.C for detail bit definition */
ULONG OpStatusFlags;
- BOOLEAN NdisRadioStateOff; //For HCT 12.0, set this flag to TRUE instead of called MlmeRadioOff.
- ABGBAND_STATE BandState; // For setting BBP used on B/G or A mode.
+ BOOLEAN NdisRadioStateOff; /*For HCT 12.0, set this flag to TRUE instead of called MlmeRadioOff. */
+ ABGBAND_STATE BandState; /* For setting BBP used on B/G or A mode. */
- // IEEE802.11H--DFS.
+ /* IEEE802.11H--DFS. */
RADAR_DETECT_STRUCT RadarDetect;
- // HT
- UCHAR BASize; // USer desired BAWindowSize. Should not exceed our max capability
- //RT_HT_CAPABILITY SupportedHtPhy;
+ /* HT */
+ UCHAR BASize; /* USer desired BAWindowSize. Should not exceed our max capability */
+ /*RT_HT_CAPABILITY SupportedHtPhy; */
RT_HT_CAPABILITY DesiredHtPhy;
HT_CAPABILITY_IE HtCapability;
- ADD_HT_INFO_IE AddHTInfo; // Useful as AP.
- //This IE is used with channel switch announcement element when changing to a new 40MHz.
- //This IE is included in channel switch ammouncement frames 7.4.1.5, beacons, probe Rsp.
- NEW_EXT_CHAN_IE NewExtChanOffset; //7.3.2.20A, 1 if extension channel is above the control channel, 3 if below, 0 if not present
+ ADD_HT_INFO_IE AddHTInfo; /* Useful as AP. */
+ /*This IE is used with channel switch announcement element when changing to a new 40MHz. */
+ /*This IE is included in channel switch ammouncement frames 7.4.1.5, beacons, probe Rsp. */
+ NEW_EXT_CHAN_IE NewExtChanOffset; /*7.3.2.20A, 1 if extension channel is above the control channel, 3 if below, 0 if not present */
BOOLEAN bHTProtect;
BOOLEAN bMIMOPSEnable;
BOOLEAN bBADecline;
-//2008/11/05: KH add to support Antenna power-saving of AP<--
+/*2008/11/05: KH add to support Antenna power-saving of AP<-- */
BOOLEAN bGreenAPEnable;
-//2008/11/05: KH add to support Antenna power-saving of AP-->
+/*2008/11/05: KH add to support Antenna power-saving of AP--> */
BOOLEAN bDisableReordering;
BOOLEAN bForty_Mhz_Intolerant;
BOOLEAN bExtChannelSwitchAnnouncement;
@@ -1301,19 +1301,19 @@ typedef struct _COMMON_CONFIG {
UCHAR TxBASize;
- // Enable wireless event
+ /* Enable wireless event */
BOOLEAN bWirelessEvent;
- BOOLEAN bWiFiTest; // Enable this parameter for WiFi test
+ BOOLEAN bWiFiTest; /* Enable this parameter for WiFi test */
- // Tx & Rx Stream number selection
+ /* Tx & Rx Stream number selection */
UCHAR TxStream;
UCHAR RxStream;
- BOOLEAN bHardwareRadio; // Hardware controlled Radio enabled
+ BOOLEAN bHardwareRadio; /* Hardware controlled Radio enabled */
#ifdef RTMP_MAC_USB
- BOOLEAN bMultipleIRP; // Multiple Bulk IN flag
- UCHAR NumOfBulkInIRP; // if bMultipleIRP == TRUE, NumOfBulkInIRP will be 4 otherwise be 1
+ BOOLEAN bMultipleIRP; /* Multiple Bulk IN flag */
+ UCHAR NumOfBulkInIRP; /* if bMultipleIRP == TRUE, NumOfBulkInIRP will be 4 otherwise be 1 */
RT_HT_CAPABILITY SupportedHtPhy;
ULONG MaxPktOneTxBulk;
UCHAR TxBulkFactor;
@@ -1325,7 +1325,7 @@ typedef struct _COMMON_CONFIG {
UINT32 BeaconAdjust;
UINT32 BeaconFactor;
UINT32 BeaconRemain;
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
NDIS_SPIN_LOCK MeasureReqTabLock;
PMEASURE_REQ_TAB pMeasureReqTab;
@@ -1333,10 +1333,10 @@ typedef struct _COMMON_CONFIG {
NDIS_SPIN_LOCK TpcReqTabLock;
PTPC_REQ_TAB pTpcReqTab;
- BOOLEAN PSPXlink; // 0: Disable. 1: Enable
+ BOOLEAN PSPXlink; /* 0: Disable. 1: Enable */
#if defined(RT305x)||defined(RT30xx)
- // request by Gary, for High Power issue
+ /* request by Gary, for High Power issue */
UCHAR HighPowerPatchDisabled;
#endif
@@ -1344,33 +1344,33 @@ typedef struct _COMMON_CONFIG {
} COMMON_CONFIG, *PCOMMON_CONFIG;
/* Modified by Wu Xi-Kun 4/21/2006 */
-// STA configuration and status
+/* STA configuration and status */
typedef struct _STA_ADMIN_CONFIG {
- // GROUP 1 -
- // User configuration loaded from Registry, E2PROM or OID_xxx. These settings describe
- // the user intended configuration, but not necessary fully equal to the final
- // settings in ACTIVE BSS after negotiation/compromize with the BSS holder (either
- // AP or IBSS holder).
- // Once initialized, user configuration can only be changed via OID_xxx
- UCHAR BssType; // BSS_INFRA or BSS_ADHOC
- USHORT AtimWin; // used when starting a new IBSS
-
- // GROUP 2 -
- // User configuration loaded from Registry, E2PROM or OID_xxx. These settings describe
- // the user intended configuration, and should be always applied to the final
- // settings in ACTIVE BSS without compromising with the BSS holder.
- // Once initialized, user configuration can only be changed via OID_xxx
+ /* GROUP 1 - */
+ /* User configuration loaded from Registry, E2PROM or OID_xxx. These settings describe */
+ /* the user intended configuration, but not necessary fully equal to the final */
+ /* settings in ACTIVE BSS after negotiation/compromize with the BSS holder (either */
+ /* AP or IBSS holder). */
+ /* Once initialized, user configuration can only be changed via OID_xxx */
+ UCHAR BssType; /* BSS_INFRA or BSS_ADHOC */
+ USHORT AtimWin; /* used when starting a new IBSS */
+
+ /* GROUP 2 - */
+ /* User configuration loaded from Registry, E2PROM or OID_xxx. These settings describe */
+ /* the user intended configuration, and should be always applied to the final */
+ /* settings in ACTIVE BSS without compromising with the BSS holder. */
+ /* Once initialized, user configuration can only be changed via OID_xxx */
UCHAR RssiTrigger;
- UCHAR RssiTriggerMode; // RSSI_TRIGGERED_UPON_BELOW_THRESHOLD or RSSI_TRIGGERED_UPON_EXCCEED_THRESHOLD
- USHORT DefaultListenCount; // default listen count;
- ULONG WindowsPowerMode; // Power mode for AC power
- ULONG WindowsBatteryPowerMode; // Power mode for battery if exists
- BOOLEAN bWindowsACCAMEnable; // Enable CAM power mode when AC on
- BOOLEAN bAutoReconnect; // Set to TRUE when setting OID_802_11_SSID with no matching BSSID
- ULONG WindowsPowerProfile; // Windows power profile, for NDIS5.1 PnP
-
- // MIB:ieee802dot11.dot11smt(1).dot11StationConfigTable(1)
- USHORT Psm; // power management mode (PWR_ACTIVE|PWR_SAVE)
+ UCHAR RssiTriggerMode; /* RSSI_TRIGGERED_UPON_BELOW_THRESHOLD or RSSI_TRIGGERED_UPON_EXCCEED_THRESHOLD */
+ USHORT DefaultListenCount; /* default listen count; */
+ ULONG WindowsPowerMode; /* Power mode for AC power */
+ ULONG WindowsBatteryPowerMode; /* Power mode for battery if exists */
+ BOOLEAN bWindowsACCAMEnable; /* Enable CAM power mode when AC on */
+ BOOLEAN bAutoReconnect; /* Set to TRUE when setting OID_802_11_SSID with no matching BSSID */
+ ULONG WindowsPowerProfile; /* Windows power profile, for NDIS5.1 PnP */
+
+ /* MIB:ieee802dot11.dot11smt(1).dot11StationConfigTable(1) */
+ USHORT Psm; /* power management mode (PWR_ACTIVE|PWR_SAVE) */
USHORT DisassocReason;
UCHAR DisassocSta[MAC_ADDR_LEN];
USHORT DeauthReason;
@@ -1378,109 +1378,109 @@ typedef struct _STA_ADMIN_CONFIG {
USHORT AuthFailReason;
UCHAR AuthFailSta[MAC_ADDR_LEN];
- NDIS_802_11_PRIVACY_FILTER PrivacyFilter; // PrivacyFilter enum for 802.1X
- NDIS_802_11_AUTHENTICATION_MODE AuthMode; // This should match to whatever microsoft defined
+ NDIS_802_11_PRIVACY_FILTER PrivacyFilter; /* PrivacyFilter enum for 802.1X */
+ NDIS_802_11_AUTHENTICATION_MODE AuthMode; /* This should match to whatever microsoft defined */
NDIS_802_11_WEP_STATUS WepStatus;
- NDIS_802_11_WEP_STATUS OrigWepStatus; // Original wep status set from OID
+ NDIS_802_11_WEP_STATUS OrigWepStatus; /* Original wep status set from OID */
- // Add to support different cipher suite for WPA2/WPA mode
- NDIS_802_11_ENCRYPTION_STATUS GroupCipher; // Multicast cipher suite
- NDIS_802_11_ENCRYPTION_STATUS PairCipher; // Unicast cipher suite
- BOOLEAN bMixCipher; // Indicate current Pair & Group use different cipher suites
+ /* Add to support different cipher suite for WPA2/WPA mode */
+ NDIS_802_11_ENCRYPTION_STATUS GroupCipher; /* Multicast cipher suite */
+ NDIS_802_11_ENCRYPTION_STATUS PairCipher; /* Unicast cipher suite */
+ BOOLEAN bMixCipher; /* Indicate current Pair & Group use different cipher suites */
USHORT RsnCapability;
NDIS_802_11_WEP_STATUS GroupKeyWepStatus;
- UCHAR WpaPassPhrase[64]; // WPA PSK pass phrase
- UINT WpaPassPhraseLen; // the length of WPA PSK pass phrase
- UCHAR PMK[32]; // WPA PSK mode PMK
- UCHAR PTK[64]; // WPA PSK mode PTK
- UCHAR GTK[32]; // GTK from authenticator
+ UCHAR WpaPassPhrase[64]; /* WPA PSK pass phrase */
+ UINT WpaPassPhraseLen; /* the length of WPA PSK pass phrase */
+ UCHAR PMK[32]; /* WPA PSK mode PMK */
+ UCHAR PTK[64]; /* WPA PSK mode PTK */
+ UCHAR GTK[32]; /* GTK from authenticator */
BSSID_INFO SavedPMK[PMKID_NO];
- UINT SavedPMKNum; // Saved PMKID number
+ UINT SavedPMKNum; /* Saved PMKID number */
UCHAR DefaultKeyId;
- // WPA 802.1x port control, WPA_802_1X_PORT_SECURED, WPA_802_1X_PORT_NOT_SECURED
+ /* WPA 802.1x port control, WPA_802_1X_PORT_SECURED, WPA_802_1X_PORT_NOT_SECURED */
UCHAR PortSecured;
- // For WPA countermeasures
- ULONG LastMicErrorTime; // record last MIC error time
- ULONG MicErrCnt; // Should be 0, 1, 2, then reset to zero (after disassoiciation).
- BOOLEAN bBlockAssoc; // Block associate attempt for 60 seconds after counter measure occurred.
- // For WPA-PSK supplicant state
- WPA_STATE WpaState; // Default is SS_NOTUSE and handled by microsoft 802.1x
+ /* For WPA countermeasures */
+ ULONG LastMicErrorTime; /* record last MIC error time */
+ ULONG MicErrCnt; /* Should be 0, 1, 2, then reset to zero (after disassoiciation). */
+ BOOLEAN bBlockAssoc; /* Block associate attempt for 60 seconds after counter measure occurred. */
+ /* For WPA-PSK supplicant state */
+ WPA_STATE WpaState; /* Default is SS_NOTUSE and handled by microsoft 802.1x */
UCHAR ReplayCounter[8];
- UCHAR ANonce[32]; // ANonce for WPA-PSK from aurhenticator
- UCHAR SNonce[32]; // SNonce for WPA-PSK
+ UCHAR ANonce[32]; /* ANonce for WPA-PSK from aurhenticator */
+ UCHAR SNonce[32]; /* SNonce for WPA-PSK */
- UCHAR LastSNR0; // last received BEACON's SNR
- UCHAR LastSNR1; // last received BEACON's SNR for 2nd antenna
+ UCHAR LastSNR0; /* last received BEACON's SNR */
+ UCHAR LastSNR1; /* last received BEACON's SNR for 2nd antenna */
RSSI_SAMPLE RssiSample;
ULONG NumOfAvgRssiSample;
- ULONG LastBeaconRxTime; // OS's timestamp of the last BEACON RX time
- ULONG Last11bBeaconRxTime; // OS's timestamp of the last 11B BEACON RX time
- ULONG Last11gBeaconRxTime; // OS's timestamp of the last 11G BEACON RX time
- ULONG Last20NBeaconRxTime; // OS's timestamp of the last 20MHz N BEACON RX time
-
- ULONG LastScanTime; // Record last scan time for issue BSSID_SCAN_LIST
- ULONG ScanCnt; // Scan counts since most recent SSID, BSSID, SCAN OID request
- BOOLEAN bSwRadio; // Software controlled Radio On/Off, TRUE: On
- BOOLEAN bHwRadio; // Hardware controlled Radio On/Off, TRUE: On
- BOOLEAN bRadio; // Radio state, And of Sw & Hw radio state
- BOOLEAN bHardwareRadio; // Hardware controlled Radio enabled
- BOOLEAN bShowHiddenSSID; // Show all known SSID in SSID list get operation
-
- // New for WPA, windows want us to keep association information and
- // Fixed IEs from last association response
+ ULONG LastBeaconRxTime; /* OS's timestamp of the last BEACON RX time */
+ ULONG Last11bBeaconRxTime; /* OS's timestamp of the last 11B BEACON RX time */
+ ULONG Last11gBeaconRxTime; /* OS's timestamp of the last 11G BEACON RX time */
+ ULONG Last20NBeaconRxTime; /* OS's timestamp of the last 20MHz N BEACON RX time */
+
+ ULONG LastScanTime; /* Record last scan time for issue BSSID_SCAN_LIST */
+ ULONG ScanCnt; /* Scan counts since most recent SSID, BSSID, SCAN OID request */
+ BOOLEAN bSwRadio; /* Software controlled Radio On/Off, TRUE: On */
+ BOOLEAN bHwRadio; /* Hardware controlled Radio On/Off, TRUE: On */
+ BOOLEAN bRadio; /* Radio state, And of Sw & Hw radio state */
+ BOOLEAN bHardwareRadio; /* Hardware controlled Radio enabled */
+ BOOLEAN bShowHiddenSSID; /* Show all known SSID in SSID list get operation */
+
+ /* New for WPA, windows want us to keep association information and */
+ /* Fixed IEs from last association response */
NDIS_802_11_ASSOCIATION_INFORMATION AssocInfo;
- USHORT ReqVarIELen; // Length of next VIE include EID & Length
- UCHAR ReqVarIEs[MAX_VIE_LEN]; // The content saved here should be little-endian format.
- USHORT ResVarIELen; // Length of next VIE include EID & Length
+ USHORT ReqVarIELen; /* Length of next VIE include EID & Length */
+ UCHAR ReqVarIEs[MAX_VIE_LEN]; /* The content saved here should be little-endian format. */
+ USHORT ResVarIELen; /* Length of next VIE include EID & Length */
UCHAR ResVarIEs[MAX_VIE_LEN];
UCHAR RSNIE_Len;
- UCHAR RSN_IE[MAX_LEN_OF_RSNIE]; // The content saved here should be little-endian format.
-
- ULONG CLBusyBytes; // Save the total bytes received durning channel load scan time
- USHORT RPIDensity[8]; // Array for RPI density collection
-
- UCHAR RMReqCnt; // Number of measurement request saved.
- UCHAR CurrentRMReqIdx; // Number of measurement request saved.
- BOOLEAN ParallelReq; // Parallel measurement, only one request performed,
- // It must be the same channel with maximum duration
- USHORT ParallelDuration; // Maximum duration for parallel measurement
- UCHAR ParallelChannel; // Only one channel with parallel measurement
- USHORT IAPPToken; // IAPP dialog token
- // Hack for channel load and noise histogram parameters
- UCHAR NHFactor; // Parameter for Noise histogram
- UCHAR CLFactor; // Parameter for channel load
+ UCHAR RSN_IE[MAX_LEN_OF_RSNIE]; /* The content saved here should be little-endian format. */
+
+ ULONG CLBusyBytes; /* Save the total bytes received durning channel load scan time */
+ USHORT RPIDensity[8]; /* Array for RPI density collection */
+
+ UCHAR RMReqCnt; /* Number of measurement request saved. */
+ UCHAR CurrentRMReqIdx; /* Number of measurement request saved. */
+ BOOLEAN ParallelReq; /* Parallel measurement, only one request performed, */
+ /* It must be the same channel with maximum duration */
+ USHORT ParallelDuration; /* Maximum duration for parallel measurement */
+ UCHAR ParallelChannel; /* Only one channel with parallel measurement */
+ USHORT IAPPToken; /* IAPP dialog token */
+ /* Hack for channel load and noise histogram parameters */
+ UCHAR NHFactor; /* Parameter for Noise histogram */
+ UCHAR CLFactor; /* Parameter for channel load */
RALINK_TIMER_STRUCT StaQuickResponeForRateUpTimer;
BOOLEAN StaQuickResponeForRateUpTimerRunning;
- UCHAR DtimCount; // 0.. DtimPeriod-1
- UCHAR DtimPeriod; // default = 3
+ UCHAR DtimCount; /* 0.. DtimPeriod-1 */
+ UCHAR DtimPeriod; /* default = 3 */
- ////////////////////////////////////////////////////////////////////////////////////////
- // This is only for WHQL test.
+ /*////////////////////////////////////////////////////////////////////////////////////// */
+ /* This is only for WHQL test. */
BOOLEAN WhqlTest;
- ////////////////////////////////////////////////////////////////////////////////////////
+ /*////////////////////////////////////////////////////////////////////////////////////// */
RALINK_TIMER_STRUCT WpaDisassocAndBlockAssocTimer;
- // Fast Roaming
- BOOLEAN bAutoRoaming; // 0:disable auto roaming by RSSI, 1:enable auto roaming by RSSI
- CHAR dBmToRoam; // the condition to roam when receiving Rssi less than this value. It's negative value.
+ /* Fast Roaming */
+ BOOLEAN bAutoRoaming; /* 0:disable auto roaming by RSSI, 1:enable auto roaming by RSSI */
+ CHAR dBmToRoam; /* the condition to roam when receiving Rssi less than this value. It's negative value. */
BOOLEAN IEEE8021X;
BOOLEAN IEEE8021x_required_keys;
- CIPHER_KEY DesireSharedKey[4]; // Record user desired WEP keys
+ CIPHER_KEY DesireSharedKey[4]; /* Record user desired WEP keys */
UCHAR DesireSharedKeyId;
- // 0: driver ignores wpa_supplicant
- // 1: wpa_supplicant initiates scanning and AP selection
- // 2: driver takes care of scanning, AP selection, and IEEE 802.11 association parameters
+ /* 0: driver ignores wpa_supplicant */
+ /* 1: wpa_supplicant initiates scanning and AP selection */
+ /* 2: driver takes care of scanning, AP selection, and IEEE 802.11 association parameters */
UCHAR WpaSupplicantUP;
UCHAR WpaSupplicantScanCount;
BOOLEAN bRSN_IE_FromWpaSupplicant;
@@ -1491,63 +1491,63 @@ typedef struct _STA_ADMIN_CONFIG {
BOOLEAN bTGnWifiTest;
BOOLEAN bScanReqIsFromWebUI;
- HTTRANSMIT_SETTING HTPhyMode, MaxHTPhyMode, MinHTPhyMode; // For transmit phy setting in TXWI.
+ HTTRANSMIT_SETTING HTPhyMode, MaxHTPhyMode, MinHTPhyMode; /* For transmit phy setting in TXWI. */
DESIRED_TRANSMIT_SETTING DesiredTransmitSetting;
RT_HT_PHY_INFO DesiredHtPhyInfo;
BOOLEAN bAutoTxRateSwitch;
#ifdef RTMP_MAC_PCI
UCHAR BBPR3;
- // PS Control has 2 meanings for advanced power save function.
- // 1. EnablePSinIdle : When no connection, always radio off except need to do site survey.
- // 2. EnableNewPS : will save more current in sleep or radio off mode.
+ /* PS Control has 2 meanings for advanced power save function. */
+ /* 1. EnablePSinIdle : When no connection, always radio off except need to do site survey. */
+ /* 2. EnableNewPS : will save more current in sleep or radio off mode. */
PS_CONTROL PSControl;
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
BOOLEAN bAutoConnectByBssid;
- ULONG BeaconLostTime; // seconds
- BOOLEAN bForceTxBurst; // 1: force enble TX PACKET BURST, 0: disable
+ ULONG BeaconLostTime; /* seconds */
+ BOOLEAN bForceTxBurst; /* 1: force enble TX PACKET BURST, 0: disable */
} STA_ADMIN_CONFIG, *PSTA_ADMIN_CONFIG;
-// This data structure keep the current active BSS/IBSS's configuration that this STA
-// had agreed upon joining the network. Which means these parameters are usually decided
-// by the BSS/IBSS creator instead of user configuration. Data in this data structurre
-// is valid only when either ADHOC_ON(pAd) or INFRA_ON(pAd) is TRUE.
-// Normally, after SCAN or failed roaming attempts, we need to recover back to
-// the current active settings.
+/* This data structure keep the current active BSS/IBSS's configuration that this STA */
+/* had agreed upon joining the network. Which means these parameters are usually decided */
+/* by the BSS/IBSS creator instead of user configuration. Data in this data structurre */
+/* is valid only when either ADHOC_ON(pAd) or INFRA_ON(pAd) is TRUE. */
+/* Normally, after SCAN or failed roaming attempts, we need to recover back to */
+/* the current active settings. */
typedef struct _STA_ACTIVE_CONFIG {
USHORT Aid;
- USHORT AtimWin; // in kusec; IBSS parameter set element
+ USHORT AtimWin; /* in kusec; IBSS parameter set element */
USHORT CapabilityInfo;
USHORT CfpMaxDuration;
USHORT CfpPeriod;
- // Copy supported rate from desired AP's beacon. We are trying to match
- // AP's supported and extended rate settings.
+ /* Copy supported rate from desired AP's beacon. We are trying to match */
+ /* AP's supported and extended rate settings. */
UCHAR SupRate[MAX_LEN_OF_SUPPORTED_RATES];
UCHAR ExtRate[MAX_LEN_OF_SUPPORTED_RATES];
UCHAR SupRateLen;
UCHAR ExtRateLen;
- // Copy supported ht from desired AP's beacon. We are trying to match
+ /* Copy supported ht from desired AP's beacon. We are trying to match */
RT_HT_PHY_INFO SupportedPhyInfo;
RT_HT_CAPABILITY SupportedHtPhy;
} STA_ACTIVE_CONFIG, *PSTA_ACTIVE_CONFIG;
typedef struct _MAC_TABLE_ENTRY {
- //Choose 1 from ValidAsWDS and ValidAsCLI to validize.
- BOOLEAN ValidAsCLI; // Sta mode, set this TRUE after Linkup,too.
- BOOLEAN ValidAsWDS; // This is WDS Entry. only for AP mode.
- BOOLEAN ValidAsApCli; //This is a AP-Client entry, only for AP mode which enable AP-Client functions.
+ /*Choose 1 from ValidAsWDS and ValidAsCLI to validize. */
+ BOOLEAN ValidAsCLI; /* Sta mode, set this TRUE after Linkup,too. */
+ BOOLEAN ValidAsWDS; /* This is WDS Entry. only for AP mode. */
+ BOOLEAN ValidAsApCli; /*This is a AP-Client entry, only for AP mode which enable AP-Client functions. */
BOOLEAN ValidAsMesh;
- BOOLEAN ValidAsDls; // This is DLS Entry. only for STA mode.
+ BOOLEAN ValidAsDls; /* This is DLS Entry. only for STA mode. */
BOOLEAN isCached;
- BOOLEAN bIAmBadAtheros; // Flag if this is Atheros chip that has IOT problem. We need to turn on RTS/CTS protection.
+ BOOLEAN bIAmBadAtheros; /* Flag if this is Atheros chip that has IOT problem. We need to turn on RTS/CTS protection. */
- UCHAR EnqueueEapolStartTimerRunning; // Enqueue EAPoL-Start for triggering EAP SM
- //jan for wpa
- // record which entry revoke MIC Failure , if it leaves the BSS itself, AP won't update aMICFailTime MIB
+ UCHAR EnqueueEapolStartTimerRunning; /* Enqueue EAPoL-Start for triggering EAP SM */
+ /*jan for wpa */
+ /* record which entry revoke MIC Failure , if it leaves the BSS itself, AP won't update aMICFailTime MIB */
UCHAR CMTimerRunning;
- UCHAR apidx; // MBSS number
+ UCHAR apidx; /* MBSS number */
UCHAR RSNIE_Len;
UCHAR RSN_IE[MAX_LEN_OF_RSNIE];
UCHAR ANonce[LEN_KEY_DESC_NONCE];
@@ -1556,14 +1556,14 @@ typedef struct _MAC_TABLE_ENTRY {
UCHAR PTK[64];
UCHAR ReTryCounter;
RALINK_TIMER_STRUCT RetryTimer;
- RALINK_TIMER_STRUCT EnqueueStartForPSKTimer; // A timer which enqueue EAPoL-Start for triggering PSK SM
- NDIS_802_11_AUTHENTICATION_MODE AuthMode; // This should match to whatever microsoft defined
+ RALINK_TIMER_STRUCT EnqueueStartForPSKTimer; /* A timer which enqueue EAPoL-Start for triggering PSK SM */
+ NDIS_802_11_AUTHENTICATION_MODE AuthMode; /* This should match to whatever microsoft defined */
NDIS_802_11_WEP_STATUS WepStatus;
NDIS_802_11_WEP_STATUS GroupKeyWepStatus;
AP_WPA_STATE WpaState;
GTK_STATE GTKState;
USHORT PortSecured;
- NDIS_802_11_PRIVACY_FILTER PrivacyFilter; // PrivacyFilter enum for 802.1X
+ NDIS_802_11_PRIVACY_FILTER PrivacyFilter; /* PrivacyFilter enum for 802.1X */
CIPHER_KEY PairwiseKey;
PVOID pAd;
INT PMKID_CacheIdx;
@@ -1572,75 +1572,75 @@ typedef struct _MAC_TABLE_ENTRY {
UCHAR Addr[MAC_ADDR_LEN];
UCHAR PsMode;
SST Sst;
- AUTH_STATE AuthState; // for SHARED KEY authentication state machine used only
- BOOLEAN IsReassocSta; // Indicate whether this is a reassociation procedure
+ AUTH_STATE AuthState; /* for SHARED KEY authentication state machine used only */
+ BOOLEAN IsReassocSta; /* Indicate whether this is a reassociation procedure */
USHORT Aid;
USHORT CapabilityInfo;
UCHAR LastRssi;
ULONG NoDataIdleCount;
- UINT16 StationKeepAliveCount; // unit: second
+ UINT16 StationKeepAliveCount; /* unit: second */
ULONG PsQIdleCount;
QUEUE_HEADER PsQueue;
- UINT32 StaConnectTime; // the live time of this station since associated with AP
+ UINT32 StaConnectTime; /* the live time of this station since associated with AP */
BOOLEAN bSendBAR;
USHORT NoBADataCountDown;
- UINT32 CachedBuf[16]; // UINT (4 bytes) for alignment
- UINT TxBFCount; // 3*3
+ UINT32 CachedBuf[16]; /* UINT (4 bytes) for alignment */
+ UINT TxBFCount; /* 3*3 */
UINT FIFOCount;
UINT DebugFIFOCount;
UINT DebugTxCount;
BOOLEAN bDlsInit;
-//====================================================
-//WDS entry needs these
-// if ValidAsWDS==TRUE, MatchWDSTabIdx is the index in WdsTab.MacTab
+/*==================================================== */
+/*WDS entry needs these */
+/* if ValidAsWDS==TRUE, MatchWDSTabIdx is the index in WdsTab.MacTab */
UINT MatchWDSTabIdx;
UCHAR MaxSupportedRate;
UCHAR CurrTxRate;
UCHAR CurrTxRateIndex;
- // to record the each TX rate's quality. 0 is best, the bigger the worse.
+ /* to record the each TX rate's quality. 0 is best, the bigger the worse. */
USHORT TxQuality[MAX_STEP_OF_TX_RATE_SWITCH];
-// USHORT OneSecTxOkCount;
+/* USHORT OneSecTxOkCount; */
UINT32 OneSecTxNoRetryOkCount;
UINT32 OneSecTxRetryOkCount;
UINT32 OneSecTxFailCount;
UINT32 ContinueTxFailCnt;
- UINT32 CurrTxRateStableTime; // # of second in current TX rate
- UCHAR TxRateUpPenalty; // extra # of second penalty due to last unstable condition
-//====================================================
+ UINT32 CurrTxRateStableTime; /* # of second in current TX rate */
+ UCHAR TxRateUpPenalty; /* extra # of second penalty due to last unstable condition */
+/*==================================================== */
BOOLEAN fNoisyEnvironment;
BOOLEAN fLastSecAccordingRSSI;
- UCHAR LastSecTxRateChangeAction; // 0: no change, 1:rate UP, 2:rate down
- CHAR LastTimeTxRateChangeAction; //Keep last time value of LastSecTxRateChangeAction
+ UCHAR LastSecTxRateChangeAction; /* 0: no change, 1:rate UP, 2:rate down */
+ CHAR LastTimeTxRateChangeAction; /*Keep last time value of LastSecTxRateChangeAction */
ULONG LastTxOkCount;
UCHAR PER[MAX_STEP_OF_TX_RATE_SWITCH];
- // a bitmap of BOOLEAN flags. each bit represent an operation status of a particular
- // BOOLEAN control, either ON or OFF. These flags should always be accessed via
- // CLIENT_STATUS_TEST_FLAG(), CLIENT_STATUS_SET_FLAG(), CLIENT_STATUS_CLEAR_FLAG() macros.
- // see fOP_STATUS_xxx in RTMP_DEF.C for detail bit definition. fCLIENT_STATUS_AMSDU_INUSED
+ /* a bitmap of BOOLEAN flags. each bit represent an operation status of a particular */
+ /* BOOLEAN control, either ON or OFF. These flags should always be accessed via */
+ /* CLIENT_STATUS_TEST_FLAG(), CLIENT_STATUS_SET_FLAG(), CLIENT_STATUS_CLEAR_FLAG() macros. */
+ /* see fOP_STATUS_xxx in RTMP_DEF.C for detail bit definition. fCLIENT_STATUS_AMSDU_INUSED */
ULONG ClientStatusFlags;
- HTTRANSMIT_SETTING HTPhyMode, MaxHTPhyMode, MinHTPhyMode; // For transmit phy setting in TXWI.
+ HTTRANSMIT_SETTING HTPhyMode, MaxHTPhyMode, MinHTPhyMode; /* For transmit phy setting in TXWI. */
- // HT EWC MIMO-N used parameters
- USHORT RXBAbitmap; // fill to on-chip RXWI_BA_BITMASK in 8.1.3RX attribute entry format
- USHORT TXBAbitmap; // This bitmap as originator, only keep in software used to mark AMPDU bit in TXWI
+ /* HT EWC MIMO-N used parameters */
+ USHORT RXBAbitmap; /* fill to on-chip RXWI_BA_BITMASK in 8.1.3RX attribute entry format */
+ USHORT TXBAbitmap; /* This bitmap as originator, only keep in software used to mark AMPDU bit in TXWI */
USHORT TXAutoBAbitmap;
USHORT BADeclineBitmap;
- USHORT BARecWcidArray[NUM_OF_TID]; // The mapping wcid of recipient session. if RXBAbitmap bit is masked
- USHORT BAOriWcidArray[NUM_OF_TID]; // The mapping wcid of originator session. if TXBAbitmap bit is masked
- USHORT BAOriSequence[NUM_OF_TID]; // The mapping wcid of originator session. if TXBAbitmap bit is masked
+ USHORT BARecWcidArray[NUM_OF_TID]; /* The mapping wcid of recipient session. if RXBAbitmap bit is masked */
+ USHORT BAOriWcidArray[NUM_OF_TID]; /* The mapping wcid of originator session. if TXBAbitmap bit is masked */
+ USHORT BAOriSequence[NUM_OF_TID]; /* The mapping wcid of originator session. if TXBAbitmap bit is masked */
- // 802.11n features.
+ /* 802.11n features. */
UCHAR MpduDensity;
UCHAR MaxRAmpduFactor;
UCHAR AMsduSize;
- UCHAR MmpsMode; // MIMO power save more.
+ UCHAR MmpsMode; /* MIMO power save more. */
HT_CAPABILITY_IE HTCapability;
@@ -1670,16 +1670,16 @@ typedef struct _MAC_TABLE {
QUEUE_HEADER McastPsQueue;
ULONG PsQIdleCount;
BOOLEAN fAnyStationInPsm;
- BOOLEAN fAnyStationBadAtheros; // Check if any Station is atheros 802.11n Chip. We need to use RTS/CTS with Atheros 802,.11n chip.
- BOOLEAN fAnyTxOPForceDisable; // Check if it is necessary to disable BE TxOP
- BOOLEAN fAllStationAsRalink; // Check if all stations are ralink-chipset
- BOOLEAN fAnyStationIsLegacy; // Check if I use legacy rate to transmit to my BSS Station/
- BOOLEAN fAnyStationNonGF; // Check if any Station can't support GF.
- BOOLEAN fAnyStation20Only; // Check if any Station can't support GF.
- BOOLEAN fAnyStationMIMOPSDynamic; // Check if any Station is MIMO Dynamic
- BOOLEAN fAnyBASession; // Check if there is BA session. Force turn on RTS/CTS
-//2008/10/28: KH add to support Antenna power-saving of AP<--
-//2008/10/28: KH add to support Antenna power-saving of AP-->
+ BOOLEAN fAnyStationBadAtheros; /* Check if any Station is atheros 802.11n Chip. We need to use RTS/CTS with Atheros 802,.11n chip. */
+ BOOLEAN fAnyTxOPForceDisable; /* Check if it is necessary to disable BE TxOP */
+ BOOLEAN fAllStationAsRalink; /* Check if all stations are ralink-chipset */
+ BOOLEAN fAnyStationIsLegacy; /* Check if I use legacy rate to transmit to my BSS Station/ */
+ BOOLEAN fAnyStationNonGF; /* Check if any Station can't support GF. */
+ BOOLEAN fAnyStation20Only; /* Check if any Station can't support GF. */
+ BOOLEAN fAnyStationMIMOPSDynamic; /* Check if any Station is MIMO Dynamic */
+ BOOLEAN fAnyBASession; /* Check if there is BA session. Force turn on RTS/CTS */
+/*2008/10/28: KH add to support Antenna power-saving of AP<-- */
+/*2008/10/28: KH add to support Antenna power-saving of AP--> */
} MAC_TABLE, *PMAC_TABLE;
struct wificonf {
@@ -1711,11 +1711,11 @@ struct _RTMP_CHIP_OP_ {
void (*AsicHaltAction) (RTMP_ADAPTER * pAd);
};
-//
-// The miniport adapter structure
-//
+/* */
+/* The miniport adapter structure */
+/* */
struct _RTMP_ADAPTER {
- PVOID OS_Cookie; // save specific structure relative to OS
+ PVOID OS_Cookie; /* save specific structure relative to OS */
PNET_DEV net_dev;
ULONG VirtualIfCnt;
@@ -1726,7 +1726,7 @@ struct _RTMP_ADAPTER {
/*****************************************************************************************/
/* PCI related parameters */
/*****************************************************************************************/
- PUCHAR CSRBaseAddress; // PCI MMIO Base Address, all access will use
+ PUCHAR CSRBaseAddress; /* PCI MMIO Base Address, all access will use */
unsigned int irq_num;
USHORT LnkCtrlBitMask;
@@ -1735,26 +1735,26 @@ struct _RTMP_ADAPTER {
USHORT HostLnkCtrlConfiguration;
USHORT HostLnkCtrlOffset;
USHORT PCIePowerSaveLevel;
- ULONG Rt3xxHostLinkCtrl; // USed for 3090F chip
- ULONG Rt3xxRalinkLinkCtrl; // USed for 3090F chip
- USHORT DeviceID; // Read from PCI config
+ ULONG Rt3xxHostLinkCtrl; /* USed for 3090F chip */
+ ULONG Rt3xxRalinkLinkCtrl; /* USed for 3090F chip */
+ USHORT DeviceID; /* Read from PCI config */
ULONG AccessBBPFailCount;
- BOOLEAN bPCIclkOff; // flag that indicate if the PICE power status in Configuration SPace..
- BOOLEAN bPCIclkOffDisableTx; //
+ BOOLEAN bPCIclkOff; /* flag that indicate if the PICE power status in Configuration SPace.. */
+ BOOLEAN bPCIclkOffDisableTx; /* */
- BOOLEAN brt30xxBanMcuCmd; //when = 0xff means all commands are ok to set .
- BOOLEAN b3090ESpecialChip; //3090E special chip that write EEPROM 0x24=0x9280.
- ULONG CheckDmaBusyCount; // Check Interrupt Status Register Count.
+ BOOLEAN brt30xxBanMcuCmd; /*when = 0xff means all commands are ok to set . */
+ BOOLEAN b3090ESpecialChip; /*3090E special chip that write EEPROM 0x24=0x9280. */
+ ULONG CheckDmaBusyCount; /* Check Interrupt Status Register Count. */
UINT int_enable_reg;
UINT int_disable_mask;
UINT int_pending;
- RTMP_DMABUF TxBufSpace[NUM_OF_TX_RING]; // Shared memory of all 1st pre-allocated TxBuf associated with each TXD
- RTMP_DMABUF RxDescRing; // Shared memory for RX descriptors
- RTMP_DMABUF TxDescRing[NUM_OF_TX_RING]; // Shared memory for Tx descriptors
- RTMP_TX_RING TxRing[NUM_OF_TX_RING]; // AC0~4 + HCCA
-#endif // RTMP_MAC_PCI //
+ RTMP_DMABUF TxBufSpace[NUM_OF_TX_RING]; /* Shared memory of all 1st pre-allocated TxBuf associated with each TXD */
+ RTMP_DMABUF RxDescRing; /* Shared memory for RX descriptors */
+ RTMP_DMABUF TxDescRing[NUM_OF_TX_RING]; /* Shared memory for Tx descriptors */
+ RTMP_TX_RING TxRing[NUM_OF_TX_RING]; /* AC0~4 + HCCA */
+#endif /* RTMP_MAC_PCI // */
NDIS_SPIN_LOCK irq_lock;
UCHAR irq_disabled;
@@ -1764,28 +1764,28 @@ struct _RTMP_ADAPTER {
/* USB related parameters */
/*****************************************************************************************/
struct usb_config_descriptor *config;
- UINT BulkInEpAddr; // bulk-in endpoint address
- UINT BulkOutEpAddr[6]; // bulk-out endpoint address
+ UINT BulkInEpAddr; /* bulk-in endpoint address */
+ UINT BulkOutEpAddr[6]; /* bulk-out endpoint address */
UINT NumberOfPipes;
USHORT BulkOutMaxPacketSize;
USHORT BulkInMaxPacketSize;
- //======Control Flags
+ /*======Control Flags */
LONG PendingIoCount;
ULONG BulkFlags;
- BOOLEAN bUsbTxBulkAggre; // Flags for bulk out data priority
+ BOOLEAN bUsbTxBulkAggre; /* Flags for bulk out data priority */
- //======Cmd Thread
+ /*======Cmd Thread */
CmdQ CmdQ;
- NDIS_SPIN_LOCK CmdQLock; // CmdQLock spinlock
+ NDIS_SPIN_LOCK CmdQLock; /* CmdQLock spinlock */
RTMP_OS_TASK cmdQTask;
- //======Semaphores (event)
+ /*======Semaphores (event) */
RTMP_OS_SEM UsbVendorReq_semaphore;
PVOID UsbVendorReqBuf;
wait_queue_head_t *wait;
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
/*****************************************************************************************/
/* RBUS related parameters */
@@ -1794,7 +1794,7 @@ struct _RTMP_ADAPTER {
/*****************************************************************************************/
/* Both PCI/USB related parameters */
/*****************************************************************************************/
- //RTMP_DEV_INFO chipInfo;
+ /*RTMP_DEV_INFO chipInfo; */
RTMP_INF_TYPE infType;
/*****************************************************************************************/
@@ -1802,42 +1802,42 @@ struct _RTMP_ADAPTER {
/*****************************************************************************************/
RTMP_OS_TASK mlmeTask;
#ifdef RTMP_TIMER_TASK_SUPPORT
- // If you want use timer task to handle the timer related jobs, enable this.
+ /* If you want use timer task to handle the timer related jobs, enable this. */
RTMP_TIMER_TASK_QUEUE TimerQ;
NDIS_SPIN_LOCK TimerQLock;
RTMP_OS_TASK timerTask;
-#endif // RTMP_TIMER_TASK_SUPPORT //
+#endif /* RTMP_TIMER_TASK_SUPPORT // */
/*****************************************************************************************/
/* Tx related parameters */
/*****************************************************************************************/
- BOOLEAN DeQueueRunning[NUM_OF_TX_RING]; // for ensuring RTUSBDeQueuePacket get call once
+ BOOLEAN DeQueueRunning[NUM_OF_TX_RING]; /* for ensuring RTUSBDeQueuePacket get call once */
NDIS_SPIN_LOCK DeQueueLock[NUM_OF_TX_RING];
#ifdef RTMP_MAC_USB
- // Data related context and AC specified, 4 AC supported
- NDIS_SPIN_LOCK BulkOutLock[6]; // BulkOut spinlock for 4 ACs
- NDIS_SPIN_LOCK MLMEBulkOutLock; // MLME BulkOut lock
+ /* Data related context and AC specified, 4 AC supported */
+ NDIS_SPIN_LOCK BulkOutLock[6]; /* BulkOut spinlock for 4 ACs */
+ NDIS_SPIN_LOCK MLMEBulkOutLock; /* MLME BulkOut lock */
HT_TX_CONTEXT TxContext[NUM_OF_TX_RING];
- NDIS_SPIN_LOCK TxContextQueueLock[NUM_OF_TX_RING]; // TxContextQueue spinlock
+ NDIS_SPIN_LOCK TxContextQueueLock[NUM_OF_TX_RING]; /* TxContextQueue spinlock */
- // 4 sets of Bulk Out index and pending flag
- UCHAR NextBulkOutIndex[4]; // only used for 4 EDCA bulkout pipe
+ /* 4 sets of Bulk Out index and pending flag */
+ UCHAR NextBulkOutIndex[4]; /* only used for 4 EDCA bulkout pipe */
- BOOLEAN BulkOutPending[6]; // used for total 6 bulkout pipe
+ BOOLEAN BulkOutPending[6]; /* used for total 6 bulkout pipe */
UCHAR bulkResetPipeid;
BOOLEAN MgmtBulkPending;
ULONG bulkResetReq[6];
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
- // resource for software backlog queues
- QUEUE_HEADER TxSwQueue[NUM_OF_TX_RING]; // 4 AC + 1 HCCA
- NDIS_SPIN_LOCK TxSwQueueLock[NUM_OF_TX_RING]; // TxSwQueue spinlock
+ /* resource for software backlog queues */
+ QUEUE_HEADER TxSwQueue[NUM_OF_TX_RING]; /* 4 AC + 1 HCCA */
+ NDIS_SPIN_LOCK TxSwQueueLock[NUM_OF_TX_RING]; /* TxSwQueue spinlock */
- RTMP_DMABUF MgmtDescRing; // Shared memory for MGMT descriptors
+ RTMP_DMABUF MgmtDescRing; /* Shared memory for MGMT descriptors */
RTMP_MGMT_RING MgmtRing;
- NDIS_SPIN_LOCK MgmtRingLock; // Prio Ring spinlock
+ NDIS_SPIN_LOCK MgmtRingLock; /* Prio Ring spinlock */
/*****************************************************************************************/
/* Rx related parameters */
@@ -1845,65 +1845,65 @@ struct _RTMP_ADAPTER {
#ifdef RTMP_MAC_PCI
RTMP_RX_RING RxRing;
- NDIS_SPIN_LOCK RxRingLock; // Rx Ring spinlock
+ NDIS_SPIN_LOCK RxRingLock; /* Rx Ring spinlock */
#ifdef RT3090
- NDIS_SPIN_LOCK McuCmdLock; //MCU Command Queue spinlock
-#endif // RT3090 //
-#endif // RTMP_MAC_PCI //
+ NDIS_SPIN_LOCK McuCmdLock; /*MCU Command Queue spinlock */
+#endif /* RT3090 // */
+#endif /* RTMP_MAC_PCI // */
#ifdef RTMP_MAC_USB
- RX_CONTEXT RxContext[RX_RING_SIZE]; // 1 for redundant multiple IRP bulk in.
- NDIS_SPIN_LOCK BulkInLock; // BulkIn spinlock for 4 ACs
- UCHAR PendingRx; // The Maximum pending Rx value should be RX_RING_SIZE.
- UCHAR NextRxBulkInIndex; // Indicate the current RxContext Index which hold by Host controller.
- UCHAR NextRxBulkInReadIndex; // Indicate the current RxContext Index which driver can read & process it.
- ULONG NextRxBulkInPosition; // Want to contatenate 2 URB buffer while 1st is bulkin failed URB. This Position is 1st URB TransferLength.
- ULONG TransferBufferLength; // current length of the packet buffer
- ULONG ReadPosition; // current read position in a packet buffer
-#endif // RTMP_MAC_USB //
+ RX_CONTEXT RxContext[RX_RING_SIZE]; /* 1 for redundant multiple IRP bulk in. */
+ NDIS_SPIN_LOCK BulkInLock; /* BulkIn spinlock for 4 ACs */
+ UCHAR PendingRx; /* The Maximum pending Rx value should be RX_RING_SIZE. */
+ UCHAR NextRxBulkInIndex; /* Indicate the current RxContext Index which hold by Host controller. */
+ UCHAR NextRxBulkInReadIndex; /* Indicate the current RxContext Index which driver can read & process it. */
+ ULONG NextRxBulkInPosition; /* Want to contatenate 2 URB buffer while 1st is bulkin failed URB. This Position is 1st URB TransferLength. */
+ ULONG TransferBufferLength; /* current length of the packet buffer */
+ ULONG ReadPosition; /* current read position in a packet buffer */
+#endif /* RTMP_MAC_USB // */
/*****************************************************************************************/
/* ASIC related parameters */
/*****************************************************************************************/
- UINT32 MACVersion; // MAC version. Record rt2860C(0x28600100) or rt2860D (0x28600101)..
+ UINT32 MACVersion; /* MAC version. Record rt2860C(0x28600100) or rt2860D (0x28600101).. */
- // ---------------------------
- // E2PROM
- // ---------------------------
- ULONG EepromVersion; // byte 0: version, byte 1: revision, byte 2~3: unused
- ULONG FirmwareVersion; // byte 0: Minor version, byte 1: Major version, otherwise unused.
+ /* --------------------------- */
+ /* E2PROM */
+ /* --------------------------- */
+ ULONG EepromVersion; /* byte 0: version, byte 1: revision, byte 2~3: unused */
+ ULONG FirmwareVersion; /* byte 0: Minor version, byte 1: Major version, otherwise unused. */
USHORT EEPROMDefaultValue[NUM_EEPROM_BBP_PARMS];
- UCHAR EEPROMAddressNum; // 93c46=6 93c66=8
+ UCHAR EEPROMAddressNum; /* 93c46=6 93c66=8 */
BOOLEAN EepromAccess;
UCHAR EFuseTag;
- // ---------------------------
- // BBP Control
- // ---------------------------
- UCHAR BbpWriteLatch[140]; // record last BBP register value written via BBP_IO_WRITE/BBP_IO_WRITE_VY_REG_ID
- CHAR BbpRssiToDbmDelta; // change from UCHAR to CHAR for high power
+ /* --------------------------- */
+ /* BBP Control */
+ /* --------------------------- */
+ UCHAR BbpWriteLatch[140]; /* record last BBP register value written via BBP_IO_WRITE/BBP_IO_WRITE_VY_REG_ID */
+ CHAR BbpRssiToDbmDelta; /* change from UCHAR to CHAR for high power */
BBP_R66_TUNING BbpTuning;
- // ----------------------------
- // RFIC control
- // ----------------------------
- UCHAR RfIcType; // RFIC_xxx
- ULONG RfFreqOffset; // Frequency offset for channel switching
- RTMP_RF_REGS LatchRfRegs; // latch th latest RF programming value since RF IC doesn't support READ
+ /* ---------------------------- */
+ /* RFIC control */
+ /* ---------------------------- */
+ UCHAR RfIcType; /* RFIC_xxx */
+ ULONG RfFreqOffset; /* Frequency offset for channel switching */
+ RTMP_RF_REGS LatchRfRegs; /* latch th latest RF programming value since RF IC doesn't support READ */
- EEPROM_ANTENNA_STRUC Antenna; // Since ANtenna definition is different for a & g. We need to save it for future reference.
+ EEPROM_ANTENNA_STRUC Antenna; /* Since ANtenna definition is different for a & g. We need to save it for future reference. */
EEPROM_NIC_CONFIG2_STRUC NicConfig2;
- // This soft Rx Antenna Diversity mechanism is used only when user set
- // RX Antenna = DIVERSITY ON
+ /* This soft Rx Antenna Diversity mechanism is used only when user set */
+ /* RX Antenna = DIVERSITY ON */
SOFT_RX_ANT_DIVERSITY RxAnt;
UCHAR RFProgSeq;
- CHANNEL_TX_POWER TxPower[MAX_NUM_OF_CHANNELS]; // Store Tx power value for all channels.
- CHANNEL_TX_POWER ChannelList[MAX_NUM_OF_CHANNELS]; // list all supported channels for site survey
- CHANNEL_11J_TX_POWER TxPower11J[MAX_NUM_OF_11JCHANNELS]; // 802.11j channel and bw
- CHANNEL_11J_TX_POWER ChannelList11J[MAX_NUM_OF_11JCHANNELS]; // list all supported channels for site survey
+ CHANNEL_TX_POWER TxPower[MAX_NUM_OF_CHANNELS]; /* Store Tx power value for all channels. */
+ CHANNEL_TX_POWER ChannelList[MAX_NUM_OF_CHANNELS]; /* list all supported channels for site survey */
+ CHANNEL_11J_TX_POWER TxPower11J[MAX_NUM_OF_11JCHANNELS]; /* 802.11j channel and bw */
+ CHANNEL_11J_TX_POWER ChannelList11J[MAX_NUM_OF_11JCHANNELS]; /* list all supported channels for site survey */
- UCHAR ChannelListNum; // number of channel in ChannelList[]
+ UCHAR ChannelListNum; /* number of channel in ChannelList[] */
UCHAR Bbp94;
BOOLEAN BbpForCCK;
ULONG Tx20MPwrCfgABand[5];
@@ -1911,47 +1911,47 @@ struct _RTMP_ADAPTER {
ULONG Tx40MPwrCfgABand[5];
ULONG Tx40MPwrCfgGBand[5];
- BOOLEAN bAutoTxAgcA; // Enable driver auto Tx Agc control
- UCHAR TssiRefA; // Store Tssi reference value as 25 temperature.
- UCHAR TssiPlusBoundaryA[5]; // Tssi boundary for increase Tx power to compensate.
- UCHAR TssiMinusBoundaryA[5]; // Tssi boundary for decrease Tx power to compensate.
- UCHAR TxAgcStepA; // Store Tx TSSI delta increment / decrement value
- CHAR TxAgcCompensateA; // Store the compensation (TxAgcStep * (idx-1))
-
- BOOLEAN bAutoTxAgcG; // Enable driver auto Tx Agc control
- UCHAR TssiRefG; // Store Tssi reference value as 25 temperature.
- UCHAR TssiPlusBoundaryG[5]; // Tssi boundary for increase Tx power to compensate.
- UCHAR TssiMinusBoundaryG[5]; // Tssi boundary for decrease Tx power to compensate.
- UCHAR TxAgcStepG; // Store Tx TSSI delta increment / decrement value
- CHAR TxAgcCompensateG; // Store the compensation (TxAgcStep * (idx-1))
-
- CHAR BGRssiOffset0; // Store B/G RSSI#0 Offset value on EEPROM 0x46h
- CHAR BGRssiOffset1; // Store B/G RSSI#1 Offset value
- CHAR BGRssiOffset2; // Store B/G RSSI#2 Offset value
-
- CHAR ARssiOffset0; // Store A RSSI#0 Offset value on EEPROM 0x4Ah
- CHAR ARssiOffset1; // Store A RSSI#1 Offset value
- CHAR ARssiOffset2; // Store A RSSI#2 Offset value
-
- CHAR BLNAGain; // Store B/G external LNA#0 value on EEPROM 0x44h
- CHAR ALNAGain0; // Store A external LNA#0 value for ch36~64
- CHAR ALNAGain1; // Store A external LNA#1 value for ch100~128
- CHAR ALNAGain2; // Store A external LNA#2 value for ch132~165
+ BOOLEAN bAutoTxAgcA; /* Enable driver auto Tx Agc control */
+ UCHAR TssiRefA; /* Store Tssi reference value as 25 temperature. */
+ UCHAR TssiPlusBoundaryA[5]; /* Tssi boundary for increase Tx power to compensate. */
+ UCHAR TssiMinusBoundaryA[5]; /* Tssi boundary for decrease Tx power to compensate. */
+ UCHAR TxAgcStepA; /* Store Tx TSSI delta increment / decrement value */
+ CHAR TxAgcCompensateA; /* Store the compensation (TxAgcStep * (idx-1)) */
+
+ BOOLEAN bAutoTxAgcG; /* Enable driver auto Tx Agc control */
+ UCHAR TssiRefG; /* Store Tssi reference value as 25 temperature. */
+ UCHAR TssiPlusBoundaryG[5]; /* Tssi boundary for increase Tx power to compensate. */
+ UCHAR TssiMinusBoundaryG[5]; /* Tssi boundary for decrease Tx power to compensate. */
+ UCHAR TxAgcStepG; /* Store Tx TSSI delta increment / decrement value */
+ CHAR TxAgcCompensateG; /* Store the compensation (TxAgcStep * (idx-1)) */
+
+ CHAR BGRssiOffset0; /* Store B/G RSSI#0 Offset value on EEPROM 0x46h */
+ CHAR BGRssiOffset1; /* Store B/G RSSI#1 Offset value */
+ CHAR BGRssiOffset2; /* Store B/G RSSI#2 Offset value */
+
+ CHAR ARssiOffset0; /* Store A RSSI#0 Offset value on EEPROM 0x4Ah */
+ CHAR ARssiOffset1; /* Store A RSSI#1 Offset value */
+ CHAR ARssiOffset2; /* Store A RSSI#2 Offset value */
+
+ CHAR BLNAGain; /* Store B/G external LNA#0 value on EEPROM 0x44h */
+ CHAR ALNAGain0; /* Store A external LNA#0 value for ch36~64 */
+ CHAR ALNAGain1; /* Store A external LNA#1 value for ch100~128 */
+ CHAR ALNAGain2; /* Store A external LNA#2 value for ch132~165 */
#ifdef RT30xx
- // for 3572
+ /* for 3572 */
UCHAR Bbp25;
UCHAR Bbp26;
- UCHAR TxMixerGain24G; // Tx mixer gain value from EEPROM to improve Tx EVM / Tx DAC, 2.4G
+ UCHAR TxMixerGain24G; /* Tx mixer gain value from EEPROM to improve Tx EVM / Tx DAC, 2.4G */
UCHAR TxMixerGain5G;
-#endif // RT30xx //
- // ----------------------------
- // LED control
- // ----------------------------
+#endif /* RT30xx // */
+ /* ---------------------------- */
+ /* LED control */
+ /* ---------------------------- */
MCU_LEDCS_STRUC LedCntl;
- USHORT Led1; // read from EEPROM 0x3c
- USHORT Led2; // EEPROM 0x3e
- USHORT Led3; // EEPROM 0x40
+ USHORT Led1; /* read from EEPROM 0x3c */
+ USHORT Led2; /* EEPROM 0x3e */
+ USHORT Led3; /* EEPROM 0x40 */
UCHAR LedIndicatorStrength;
UCHAR RssiSingalstrengthOffet;
BOOLEAN bLedOnScanning;
@@ -1960,12 +1960,12 @@ struct _RTMP_ADAPTER {
/*****************************************************************************************/
/* 802.11 related parameters */
/*****************************************************************************************/
- // outgoing BEACON frame buffer and corresponding TXD
+ /* outgoing BEACON frame buffer and corresponding TXD */
TXWI_STRUC BeaconTxWI;
PUCHAR BeaconBuf;
USHORT BeaconOffset[HW_BEACON_MAX_COUNT];
- // pre-build PS-POLL and NULL frame upon link up. for efficiency purpose.
+ /* pre-build PS-POLL and NULL frame upon link up. for efficiency purpose. */
PSPOLL_FRAME PsPollFrame;
HEADER_802_11 NullFrame;
@@ -1974,45 +1974,45 @@ struct _RTMP_ADAPTER {
TX_CONTEXT NullContext;
TX_CONTEXT PsPollContext;
TX_CONTEXT RTSContext;
-#endif // RTMP_MAC_USB //
-
-//=========AP===========
-
-//=======STA===========
- // -----------------------------------------------
- // STA specific configuration & operation status
- // used only when pAd->OpMode == OPMODE_STA
- // -----------------------------------------------
- STA_ADMIN_CONFIG StaCfg; // user desired settings
- STA_ACTIVE_CONFIG StaActive; // valid only when ADHOC_ON(pAd) || INFRA_ON(pAd)
- CHAR nickname[IW_ESSID_MAX_SIZE + 1]; // nickname, only used in the iwconfig i/f
+#endif /* RTMP_MAC_USB // */
+
+/*=========AP=========== */
+
+/*=======STA=========== */
+ /* ----------------------------------------------- */
+ /* STA specific configuration & operation status */
+ /* used only when pAd->OpMode == OPMODE_STA */
+ /* ----------------------------------------------- */
+ STA_ADMIN_CONFIG StaCfg; /* user desired settings */
+ STA_ACTIVE_CONFIG StaActive; /* valid only when ADHOC_ON(pAd) || INFRA_ON(pAd) */
+ CHAR nickname[IW_ESSID_MAX_SIZE + 1]; /* nickname, only used in the iwconfig i/f */
NDIS_MEDIA_STATE PreMediaState;
-//=======Common===========
- // OP mode: either AP or STA
- UCHAR OpMode; // OPMODE_STA, OPMODE_AP
+/*=======Common=========== */
+ /* OP mode: either AP or STA */
+ UCHAR OpMode; /* OPMODE_STA, OPMODE_AP */
- NDIS_MEDIA_STATE IndicateMediaState; // Base on Indication state, default is NdisMediaStateDisConnected
+ NDIS_MEDIA_STATE IndicateMediaState; /* Base on Indication state, default is NdisMediaStateDisConnected */
/* MAT related parameters */
- // configuration: read from Registry & E2PROM
- BOOLEAN bLocalAdminMAC; // Use user changed MAC
- UCHAR PermanentAddress[MAC_ADDR_LEN]; // Factory default MAC address
- UCHAR CurrentAddress[MAC_ADDR_LEN]; // User changed MAC address
+ /* configuration: read from Registry & E2PROM */
+ BOOLEAN bLocalAdminMAC; /* Use user changed MAC */
+ UCHAR PermanentAddress[MAC_ADDR_LEN]; /* Factory default MAC address */
+ UCHAR CurrentAddress[MAC_ADDR_LEN]; /* User changed MAC address */
- // ------------------------------------------------------
- // common configuration to both OPMODE_STA and OPMODE_AP
- // ------------------------------------------------------
+ /* ------------------------------------------------------ */
+ /* common configuration to both OPMODE_STA and OPMODE_AP */
+ /* ------------------------------------------------------ */
COMMON_CONFIG CommonCfg;
MLME_STRUCT Mlme;
- // AP needs those vaiables for site survey feature.
- MLME_AUX MlmeAux; // temporary settings used during MLME state machine
- BSS_TABLE ScanTab; // store the latest SCAN result
+ /* AP needs those vaiables for site survey feature. */
+ MLME_AUX MlmeAux; /* temporary settings used during MLME state machine */
+ BSS_TABLE ScanTab; /* store the latest SCAN result */
- //About MacTab, the sta driver will use #0 and #1 for multicast and AP.
- MAC_TABLE MacTab; // ASIC on-chip WCID entry table. At TX, ASIC always use key according to this on-chip table.
+ /*About MacTab, the sta driver will use #0 and #1 for multicast and AP. */
+ MAC_TABLE MacTab; /* ASIC on-chip WCID entry table. At TX, ASIC always use key according to this on-chip table. */
NDIS_SPIN_LOCK MacTabLock;
BA_TABLE BATable;
@@ -2020,46 +2020,46 @@ struct _RTMP_ADAPTER {
NDIS_SPIN_LOCK BATabLock;
RALINK_TIMER_STRUCT RECBATimer;
- // encryption/decryption KEY tables
- CIPHER_KEY SharedKey[MAX_MBSSID_NUM][4]; // STA always use SharedKey[BSS0][0..3]
+ /* encryption/decryption KEY tables */
+ CIPHER_KEY SharedKey[MAX_MBSSID_NUM][4]; /* STA always use SharedKey[BSS0][0..3] */
- // RX re-assembly buffer for fragmentation
- FRAGMENT_FRAME FragFrame; // Frame storage for fragment frame
+ /* RX re-assembly buffer for fragmentation */
+ FRAGMENT_FRAME FragFrame; /* Frame storage for fragment frame */
- // various Counters
- COUNTER_802_3 Counters8023; // 802.3 counters
- COUNTER_802_11 WlanCounters; // 802.11 MIB counters
- COUNTER_RALINK RalinkCounters; // Ralink propriety counters
- COUNTER_DRS DrsCounters; // counters for Dynamic TX Rate Switching
- PRIVATE_STRUC PrivateInfo; // Private information & counters
+ /* various Counters */
+ COUNTER_802_3 Counters8023; /* 802.3 counters */
+ COUNTER_802_11 WlanCounters; /* 802.11 MIB counters */
+ COUNTER_RALINK RalinkCounters; /* Ralink propriety counters */
+ COUNTER_DRS DrsCounters; /* counters for Dynamic TX Rate Switching */
+ PRIVATE_STRUC PrivateInfo; /* Private information & counters */
- // flags, see fRTMP_ADAPTER_xxx flags
- ULONG Flags; // Represent current device status
- ULONG PSFlags; // Power Save operation flag.
+ /* flags, see fRTMP_ADAPTER_xxx flags */
+ ULONG Flags; /* Represent current device status */
+ ULONG PSFlags; /* Power Save operation flag. */
- // current TX sequence #
+ /* current TX sequence # */
USHORT Sequence;
- // Control disconnect / connect event generation
- //+++Didn't used anymore
+ /* Control disconnect / connect event generation */
+ /*+++Didn't used anymore */
ULONG LinkDownTime;
- //---
+ /*--- */
ULONG LastRxRate;
ULONG LastTxRate;
- //+++Used only for Station
- BOOLEAN bConfigChanged; // Config Change flag for the same SSID setting
- //---
+ /*+++Used only for Station */
+ BOOLEAN bConfigChanged; /* Config Change flag for the same SSID setting */
+ /*--- */
- ULONG ExtraInfo; // Extra information for displaying status
- ULONG SystemErrorBitmap; // b0: E2PROM version error
+ ULONG ExtraInfo; /* Extra information for displaying status */
+ ULONG SystemErrorBitmap; /* b0: E2PROM version error */
- //+++Didn't used anymore
- ULONG MacIcVersion; // MAC/BBP serial interface issue solved after ver.D
- //---
+ /*+++Didn't used anymore */
+ ULONG MacIcVersion; /* MAC/BBP serial interface issue solved after ver.D */
+ /*--- */
- // ---------------------------
- // System event log
- // ---------------------------
+ /* --------------------------- */
+ /* System event log */
+ /* --------------------------- */
RT_802_11_EVENT_TABLE EventTab;
BOOLEAN HTCEnable;
@@ -2070,64 +2070,64 @@ struct _RTMP_ADAPTER {
#ifdef RTMP_MAC_USB
ULONG BulkOutDataOneSecCount;
ULONG BulkInDataOneSecCount;
- ULONG BulkLastOneSecCount; // BulkOutDataOneSecCount + BulkInDataOneSecCount
+ ULONG BulkLastOneSecCount; /* BulkOutDataOneSecCount + BulkInDataOneSecCount */
ULONG watchDogRxCnt;
ULONG watchDogRxOverFlowCnt;
ULONG watchDogTxPendingCnt[NUM_OF_TX_RING];
INT TransferedLength[NUM_OF_TX_RING];
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
BOOLEAN bUpdateBcnCntDone;
- ULONG watchDogMacDeadlock; // prevent MAC/BBP into deadlock condition
- // ----------------------------
- // DEBUG paramerts
- // ----------------------------
- //ULONG DebugSetting[4];
+ ULONG watchDogMacDeadlock; /* prevent MAC/BBP into deadlock condition */
+ /* ---------------------------- */
+ /* DEBUG paramerts */
+ /* ---------------------------- */
+ /*ULONG DebugSetting[4]; */
BOOLEAN bBanAllBaSetup;
BOOLEAN bPromiscuous;
- // ----------------------------
- // rt2860c emulation-use Parameters
- // ----------------------------
- //ULONG rtsaccu[30];
- //ULONG ctsaccu[30];
- //ULONG cfendaccu[30];
- //ULONG bacontent[16];
- //ULONG rxint[RX_RING_SIZE+1];
- //UCHAR rcvba[60];
+ /* ---------------------------- */
+ /* rt2860c emulation-use Parameters */
+ /* ---------------------------- */
+ /*ULONG rtsaccu[30]; */
+ /*ULONG ctsaccu[30]; */
+ /*ULONG cfendaccu[30]; */
+ /*ULONG bacontent[16]; */
+ /*ULONG rxint[RX_RING_SIZE+1]; */
+ /*UCHAR rcvba[60]; */
BOOLEAN bLinkAdapt;
BOOLEAN bForcePrintTX;
BOOLEAN bForcePrintRX;
- //BOOLEAN bDisablescanning; //defined in RT2870 USB
+ /*BOOLEAN bDisablescanning; //defined in RT2870 USB */
BOOLEAN bStaFifoTest;
BOOLEAN bProtectionTest;
BOOLEAN bBroadComHT;
- //+++Following add from RT2870 USB.
+ /*+++Following add from RT2870 USB. */
ULONG BulkOutReq;
ULONG BulkOutComplete;
ULONG BulkOutCompleteOther;
- ULONG BulkOutCompleteCancel; // seems not use now?
+ ULONG BulkOutCompleteCancel; /* seems not use now? */
ULONG BulkInReq;
ULONG BulkInComplete;
ULONG BulkInCompleteFail;
- //---
+ /*--- */
struct wificonf WIFItestbed;
struct reordering_mpdu_pool mpdu_blk_pool;
- ULONG OneSecondnonBEpackets; // record non BE packets per second
+ ULONG OneSecondnonBEpackets; /* record non BE packets per second */
#ifdef LINUX
struct iw_statistics iw_stats;
struct net_device_stats stats;
-#endif // LINUX //
+#endif /* LINUX // */
ULONG TbttTickCount;
#ifdef PCI_MSI_SUPPORT
BOOLEAN HaveMsi;
-#endif // PCI_MSI_SUPPORT //
+#endif /* PCI_MSI_SUPPORT // */
UCHAR is_on;
@@ -2143,30 +2143,30 @@ struct _RTMP_ADAPTER {
#ifdef RTMP_EFUSE_SUPPORT
BOOLEAN bUseEfuse;
UCHAR EEPROMImage[1024];
-#endif // RTMP_EFUSE_SUPPORT //
-#endif // RT30xx //
+#endif /* RTMP_EFUSE_SUPPORT // */
+#endif /* RT30xx // */
};
#define DELAYINTMASK 0x0003fffb
#define INTMASK 0x0003fffb
#define IndMask 0x0003fffc
-#define RxINT 0x00000005 // Delayed Rx or indivi rx
-#define TxDataInt 0x000000fa // Delayed Tx or indivi tx
-#define TxMgmtInt 0x00000102 // Delayed Tx or indivi tx
-#define TxCoherent 0x00020000 // tx coherent
-#define RxCoherent 0x00010000 // rx coherent
-#define McuCommand 0x00000200 // mcu
-#define PreTBTTInt 0x00001000 // Pre-TBTT interrupt
-#define TBTTInt 0x00000800 // TBTT interrupt
-#define GPTimeOutInt 0x00008000 // GPtimeout interrupt
-#define AutoWakeupInt 0x00004000 // AutoWakeupInt interrupt
-#define FifoStaFullInt 0x00002000 // fifo statistics full interrupt
+#define RxINT 0x00000005 /* Delayed Rx or indivi rx */
+#define TxDataInt 0x000000fa /* Delayed Tx or indivi tx */
+#define TxMgmtInt 0x00000102 /* Delayed Tx or indivi tx */
+#define TxCoherent 0x00020000 /* tx coherent */
+#define RxCoherent 0x00010000 /* rx coherent */
+#define McuCommand 0x00000200 /* mcu */
+#define PreTBTTInt 0x00001000 /* Pre-TBTT interrupt */
+#define TBTTInt 0x00000800 /* TBTT interrupt */
+#define GPTimeOutInt 0x00008000 /* GPtimeout interrupt */
+#define AutoWakeupInt 0x00004000 /* AutoWakeupInt interrupt */
+#define FifoStaFullInt 0x00002000 /* fifo statistics full interrupt */
/***************************************************************************
* Rx Path software control block related data structures
**************************************************************************/
typedef struct _RX_BLK_ {
-// RXD_STRUC RxD; // sample
+/* RXD_STRUC RxD; // sample */
RT28XX_RXD_STRUC RxD;
PRXWI_STRUC pRxWI;
PHEADER_802_11 pHeader;
@@ -2174,7 +2174,7 @@ typedef struct _RX_BLK_ {
UCHAR *pData;
USHORT DataSize;
USHORT Flags;
- UCHAR UserPriority; // for calculate TKIP MIC using
+ UCHAR UserPriority; /* for calculate TKIP MIC using */
} RX_BLK;
#define RX_BLK_SET_FLAG(_pRxBlk, _flag) (_pRxBlk->Flags |= _flag)
@@ -2210,53 +2210,53 @@ typedef struct _RX_BLK_ {
#define TX_RALINK_FRAME 0x10
#define TX_FRAG_FRAME 0x20
-// Currently the sizeof(TX_BLK) is 148 bytes.
+/* Currently the sizeof(TX_BLK) is 148 bytes. */
typedef struct _TX_BLK_ {
UCHAR QueIdx;
- UCHAR TxFrameType; // Indicate the Transmission type of the all frames in one batch
- UCHAR TotalFrameNum; // Total frame number want to send-out in one batch
- USHORT TotalFragNum; // Total frame fragments required in one batch
- USHORT TotalFrameLen; // Total length of all frames want to send-out in one batch
+ UCHAR TxFrameType; /* Indicate the Transmission type of the all frames in one batch */
+ UCHAR TotalFrameNum; /* Total frame number want to send-out in one batch */
+ USHORT TotalFragNum; /* Total frame fragments required in one batch */
+ USHORT TotalFrameLen; /* Total length of all frames want to send-out in one batch */
QUEUE_HEADER TxPacketList;
- MAC_TABLE_ENTRY *pMacEntry; // NULL: packet with 802.11 RA field is multicast/broadcast address
+ MAC_TABLE_ENTRY *pMacEntry; /* NULL: packet with 802.11 RA field is multicast/broadcast address */
HTTRANSMIT_SETTING *pTransmit;
- // Following structure used for the characteristics of a specific packet.
+ /* Following structure used for the characteristics of a specific packet. */
PNDIS_PACKET pPacket;
- PUCHAR pSrcBufHeader; // Reference to the head of sk_buff->data
- PUCHAR pSrcBufData; // Reference to the sk_buff->data, will changed depends on hanlding progresss
- UINT SrcBufLen; // Length of packet payload which not including Layer 2 header
- PUCHAR pExtraLlcSnapEncap; // NULL means no extra LLC/SNAP is required
- UCHAR HeaderBuf[128]; // TempBuffer for TX_INFO + TX_WI + 802.11 Header + padding + AMSDU SubHeader + LLC/SNAP
- //RT2870 2.1.0.0 uses only 80 bytes
- //RT3070 2.1.1.0 uses only 96 bytes
- //RT3090 2.1.0.0 uses only 96 bytes
- UCHAR MpduHeaderLen; // 802.11 header length NOT including the padding
- UCHAR HdrPadLen; // recording Header Padding Length;
- UCHAR apidx; // The interface associated to this packet
- UCHAR Wcid; // The MAC entry associated to this packet
- UCHAR UserPriority; // priority class of packet
- UCHAR FrameGap; // what kind of IFS this packet use
- UCHAR MpduReqNum; // number of fragments of this frame
- UCHAR TxRate; // TODO: Obsoleted? Should change to MCS?
- UCHAR CipherAlg; // cipher alogrithm
+ PUCHAR pSrcBufHeader; /* Reference to the head of sk_buff->data */
+ PUCHAR pSrcBufData; /* Reference to the sk_buff->data, will changed depends on hanlding progresss */
+ UINT SrcBufLen; /* Length of packet payload which not including Layer 2 header */
+ PUCHAR pExtraLlcSnapEncap; /* NULL means no extra LLC/SNAP is required */
+ UCHAR HeaderBuf[128]; /* TempBuffer for TX_INFO + TX_WI + 802.11 Header + padding + AMSDU SubHeader + LLC/SNAP */
+ /*RT2870 2.1.0.0 uses only 80 bytes */
+ /*RT3070 2.1.1.0 uses only 96 bytes */
+ /*RT3090 2.1.0.0 uses only 96 bytes */
+ UCHAR MpduHeaderLen; /* 802.11 header length NOT including the padding */
+ UCHAR HdrPadLen; /* recording Header Padding Length; */
+ UCHAR apidx; /* The interface associated to this packet */
+ UCHAR Wcid; /* The MAC entry associated to this packet */
+ UCHAR UserPriority; /* priority class of packet */
+ UCHAR FrameGap; /* what kind of IFS this packet use */
+ UCHAR MpduReqNum; /* number of fragments of this frame */
+ UCHAR TxRate; /* TODO: Obsoleted? Should change to MCS? */
+ UCHAR CipherAlg; /* cipher alogrithm */
PCIPHER_KEY pKey;
- USHORT Flags; //See following definitions for detail.
+ USHORT Flags; /*See following definitions for detail. */
- //YOU SHOULD NOT TOUCH IT! Following parameters are used for hardware-depended layer.
- ULONG Priv; // Hardware specific value saved in here.
+ /*YOU SHOULD NOT TOUCH IT! Following parameters are used for hardware-depended layer. */
+ ULONG Priv; /* Hardware specific value saved in here. */
} TX_BLK, *PTX_BLK;
-#define fTX_bRtsRequired 0x0001 // Indicate if need send RTS frame for protection. Not used in RT2860/RT2870.
-#define fTX_bAckRequired 0x0002 // the packet need ack response
-#define fTX_bPiggyBack 0x0004 // Legacy device use Piggback or not
-#define fTX_bHTRate 0x0008 // allow to use HT rate
-#define fTX_bForceNonQoS 0x0010 // force to transmit frame without WMM-QoS in HT mode
-#define fTX_bAllowFrag 0x0020 // allow to fragment the packet, A-MPDU, A-MSDU, A-Ralink is not allowed to fragment
-#define fTX_bMoreData 0x0040 // there are more data packets in PowerSave Queue
-#define fTX_bWMM 0x0080 // QOS Data
+#define fTX_bRtsRequired 0x0001 /* Indicate if need send RTS frame for protection. Not used in RT2860/RT2870. */
+#define fTX_bAckRequired 0x0002 /* the packet need ack response */
+#define fTX_bPiggyBack 0x0004 /* Legacy device use Piggback or not */
+#define fTX_bHTRate 0x0008 /* allow to use HT rate */
+#define fTX_bForceNonQoS 0x0010 /* force to transmit frame without WMM-QoS in HT mode */
+#define fTX_bAllowFrag 0x0020 /* allow to fragment the packet, A-MPDU, A-MSDU, A-Ralink is not allowed to fragment */
+#define fTX_bMoreData 0x0040 /* there are more data packets in PowerSave Queue */
+#define fTX_bWMM 0x0080 /* QOS Data */
#define fTX_bClearEAPFrame 0x0100
#define TX_BLK_SET_FLAG(_pTxBlk, _flag) (_pTxBlk->Flags |= _flag)
@@ -2278,7 +2278,7 @@ static inline VOID ConvertMulticastIP2MAC(IN PUCHAR pIpAddr,
switch (ProtoType) {
case ETH_P_IPV6:
-// memset(*ppMacAddr, 0, ETH_LENGTH_OF_ADDRESS);
+/* memset(*ppMacAddr, 0, ETH_LENGTH_OF_ADDRESS); */
*(*ppMacAddr) = 0x33;
*(*ppMacAddr + 1) = 0x33;
*(*ppMacAddr + 2) = pIpAddr[12];
@@ -2289,7 +2289,7 @@ static inline VOID ConvertMulticastIP2MAC(IN PUCHAR pIpAddr,
case ETH_P_IP:
default:
-// memset(*ppMacAddr, 0, ETH_LENGTH_OF_ADDRESS);
+/* memset(*ppMacAddr, 0, ETH_LENGTH_OF_ADDRESS); */
*(*ppMacAddr) = 0x01;
*(*ppMacAddr + 1) = 0x00;
*(*ppMacAddr + 2) = 0x5e;
@@ -2305,9 +2305,9 @@ static inline VOID ConvertMulticastIP2MAC(IN PUCHAR pIpAddr,
char *GetPhyMode(int Mode);
char *GetBW(int BW);
-//
-// Private routines in rtmp_init.c
-//
+/* */
+/* Private routines in rtmp_init.c */
+/* */
NDIS_STATUS RTMPAllocAdapterBlock(IN PVOID handle,
OUT PRTMP_ADAPTER * ppAdapter);
@@ -2328,7 +2328,7 @@ NDIS_STATUS RT30xxWriteRFRegister(IN PRTMP_ADAPTER pAd,
NDIS_STATUS RT30xxReadRFRegister(IN PRTMP_ADAPTER pAd,
IN UCHAR regID, IN PUCHAR pValue);
-#endif // RTMP_RF_RW_SUPPORT //
+#endif /* RTMP_RF_RW_SUPPORT // */
VOID NICReadEEPROMParameters(IN PRTMP_ADAPTER pAd, IN PUCHAR mac_addr);
@@ -2386,9 +2386,9 @@ VOID RTMPSetSignalLED(IN PRTMP_ADAPTER pAd, IN NDIS_802_11_RSSI Dbm);
VOID RTMPEnableRxTx(IN PRTMP_ADAPTER pAd);
-//
-// prototype in action.c
-//
+/* */
+/* prototype in action.c */
+/* */
VOID ActionStateMachineInit(IN PRTMP_ADAPTER pAd,
IN STATE_MACHINE * S,
OUT STATE_MACHINE_FUNC Trans[]);
@@ -2444,9 +2444,9 @@ BOOLEAN CntlEnqueueForRecv(IN PRTMP_ADAPTER pAd,
IN ULONG Wcid,
IN ULONG MsgLen, IN PFRAME_BA_REQ pMsg);
-//
-// Private routines in rtmp_data.c
-//
+/* */
+/* Private routines in rtmp_data.c */
+/* */
BOOLEAN RTMPHandleRxDoneInterrupt(IN PRTMP_ADAPTER pAd);
BOOLEAN RTMPHandleTxRingDmaDoneInterrupt(IN PRTMP_ADAPTER pAd,
@@ -2511,11 +2511,11 @@ NDIS_STATUS MlmeDataHardTransmit(IN PRTMP_ADAPTER pAd,
VOID RTMPWriteTxDescriptor(IN PRTMP_ADAPTER pAd,
IN PTXD_STRUC pTxD, IN BOOLEAN bWIV, IN UCHAR QSEL);
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
USHORT RTMPCalcDuration(IN PRTMP_ADAPTER pAd, IN UCHAR Rate, IN ULONG Size);
-VOID RTMPWriteTxWI(IN PRTMP_ADAPTER pAd, IN PTXWI_STRUC pTxWI, IN BOOLEAN FRAG, IN BOOLEAN CFACK, IN BOOLEAN InsTimestamp, IN BOOLEAN AMPDU, IN BOOLEAN Ack, IN BOOLEAN NSeq, // HW new a sequence.
+VOID RTMPWriteTxWI(IN PRTMP_ADAPTER pAd, IN PTXWI_STRUC pTxWI, IN BOOLEAN FRAG, IN BOOLEAN CFACK, IN BOOLEAN InsTimestamp, IN BOOLEAN AMPDU, IN BOOLEAN Ack, IN BOOLEAN NSeq, /* HW new a sequence. */
IN UCHAR BASize,
IN UCHAR WCID,
IN ULONG Length,
@@ -2538,8 +2538,8 @@ VOID RTMPResumeMsduTransmission(IN PRTMP_ADAPTER pAd);
NDIS_STATUS MiniportMMRequest(IN PRTMP_ADAPTER pAd,
IN UCHAR QueIdx, IN PUCHAR pData, IN UINT Length);
-//+++mark by shiang, now this function merge to MiniportMMRequest()
-//---mark by shiang, now this function merge to MiniportMMRequest()
+/*+++mark by shiang, now this function merge to MiniportMMRequest() */
+/*---mark by shiang, now this function merge to MiniportMMRequest() */
VOID RTMPSendNullFrame(IN PRTMP_ADAPTER pAd,
IN UCHAR TxRate, IN BOOLEAN bQosNull);
@@ -2588,9 +2588,9 @@ BOOLEAN RTMPCheckDHCPFrame(IN PRTMP_ADAPTER pAd, IN PNDIS_PACKET pPacket);
BOOLEAN RTMPCheckEtherType(IN PRTMP_ADAPTER pAd, IN PNDIS_PACKET pPacket);
-//
-// Private routines in rtmp_wep.c
-//
+/* */
+/* Private routines in rtmp_wep.c */
+/* */
VOID RTMPInitWepEngine(IN PRTMP_ADAPTER pAd,
IN PUCHAR pKey,
IN UCHAR KeyId, IN UCHAR KeyLen, IN PUCHAR pDest);
@@ -2619,11 +2619,11 @@ VOID WPAARCFOUR_ENCRYPT(IN PARCFOURCONTEXT Ctx,
UINT RTMP_CALC_FCS32(IN UINT Fcs, IN PUCHAR Cp, IN INT Len);
-//
-// MLME routines
-//
+/* */
+/* MLME routines */
+/* */
-// Asic/RF/BBP related functions
+/* Asic/RF/BBP related functions */
VOID AsicAdjustTxPower(IN PRTMP_ADAPTER pAd);
@@ -2711,7 +2711,7 @@ BOOLEAN AsicSendCommandToMcu(IN PRTMP_ADAPTER pAd,
#ifdef RTMP_MAC_PCI
BOOLEAN AsicCheckCommanOk(IN PRTMP_ADAPTER pAd, IN UCHAR Command);
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
VOID MacAddrRandomBssid(IN PRTMP_ADAPTER pAd, OUT PUCHAR pAddr);
@@ -2748,7 +2748,7 @@ VOID BssTableDeleteEntry(IN OUT PBSS_TABLE pTab,
VOID BATableDeleteORIEntry(IN OUT PRTMP_ADAPTER pAd,
IN BA_ORI_ENTRY * pBAORIEntry);
-VOID BssEntrySet(IN PRTMP_ADAPTER pAd, OUT PBSS_ENTRY pBss, IN PUCHAR pBssid, IN CHAR Ssid[], IN UCHAR SsidLen, IN UCHAR BssType, IN USHORT BeaconPeriod, IN PCF_PARM CfParm, IN USHORT AtimWin, IN USHORT CapabilityInfo, IN UCHAR SupRate[], IN UCHAR SupRateLen, IN UCHAR ExtRate[], IN UCHAR ExtRateLen, IN HT_CAPABILITY_IE * pHtCapability, IN ADD_HT_INFO_IE * pAddHtInfo, // AP might use this additional ht info IE
+VOID BssEntrySet(IN PRTMP_ADAPTER pAd, OUT PBSS_ENTRY pBss, IN PUCHAR pBssid, IN CHAR Ssid[], IN UCHAR SsidLen, IN UCHAR BssType, IN USHORT BeaconPeriod, IN PCF_PARM CfParm, IN USHORT AtimWin, IN USHORT CapabilityInfo, IN UCHAR SupRate[], IN UCHAR SupRateLen, IN UCHAR ExtRate[], IN UCHAR ExtRateLen, IN HT_CAPABILITY_IE * pHtCapability, IN ADD_HT_INFO_IE * pAddHtInfo, /* AP might use this additional ht info IE */
IN UCHAR HtCapabilityLen,
IN UCHAR AddHtInfoLen,
IN UCHAR NewExtChanOffset,
@@ -2761,7 +2761,7 @@ VOID BssEntrySet(IN PRTMP_ADAPTER pAd, OUT PBSS_ENTRY pBss, IN PUCHAR pBssid, IN
IN PQBSS_LOAD_PARM pQbssLoad,
IN USHORT LengthVIE, IN PNDIS_802_11_VARIABLE_IEs pVIE);
-ULONG BssTableSetEntry(IN PRTMP_ADAPTER pAd, OUT PBSS_TABLE pTab, IN PUCHAR pBssid, IN CHAR Ssid[], IN UCHAR SsidLen, IN UCHAR BssType, IN USHORT BeaconPeriod, IN CF_PARM * CfParm, IN USHORT AtimWin, IN USHORT CapabilityInfo, IN UCHAR SupRate[], IN UCHAR SupRateLen, IN UCHAR ExtRate[], IN UCHAR ExtRateLen, IN HT_CAPABILITY_IE * pHtCapability, IN ADD_HT_INFO_IE * pAddHtInfo, // AP might use this additional ht info IE
+ULONG BssTableSetEntry(IN PRTMP_ADAPTER pAd, OUT PBSS_TABLE pTab, IN PUCHAR pBssid, IN CHAR Ssid[], IN UCHAR SsidLen, IN UCHAR BssType, IN USHORT BeaconPeriod, IN CF_PARM * CfParm, IN USHORT AtimWin, IN USHORT CapabilityInfo, IN UCHAR SupRate[], IN UCHAR SupRateLen, IN UCHAR ExtRate[], IN UCHAR ExtRateLen, IN HT_CAPABILITY_IE * pHtCapability, IN ADD_HT_INFO_IE * pAddHtInfo, /* AP might use this additional ht info IE */
IN UCHAR HtCapabilityLen,
IN UCHAR AddHtInfoLen,
IN UCHAR NewExtChanOffset,
@@ -2849,7 +2849,7 @@ VOID DisassocTimeout(IN PVOID SystemSpecific1,
IN PVOID FunctionContext,
IN PVOID SystemSpecific2, IN PVOID SystemSpecific3);
-//----------------------------------------------
+/*---------------------------------------------- */
VOID MlmeAssocReqAction(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem);
VOID MlmeReassocReqAction(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem);
@@ -2879,7 +2879,7 @@ VOID InvalidStateWhenDisassociate(IN PRTMP_ADAPTER pAd,
#ifdef RTMP_MAC_USB
VOID MlmeCntlConfirm(IN PRTMP_ADAPTER pAd, IN ULONG MsgType, IN USHORT Msg);
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
VOID ComposePsPoll(IN PRTMP_ADAPTER pAd);
@@ -2918,7 +2918,7 @@ VOID MlmeDeauthReqAction(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem);
VOID InvalidStateWhenAuth(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem);
-//=============================================
+/*============================================= */
VOID AuthRspStateMachineInit(IN PRTMP_ADAPTER pAd,
IN PSTATE_MACHINE Sm,
@@ -2932,11 +2932,11 @@ VOID PeerAuthSimpleRspGenAndSend(IN PRTMP_ADAPTER pAd,
IN USHORT Seq,
IN USHORT Reason, IN USHORT Status);
-//
-// Private routines in dls.c
-//
+/* */
+/* Private routines in dls.c */
+/* */
-//========================================
+/*======================================== */
VOID SyncStateMachineInit(IN PRTMP_ADAPTER pAd,
IN STATE_MACHINE * Sm,
@@ -2959,7 +2959,7 @@ VOID InvalidStateWhenStart(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem);
VOID EnqueueProbeRequest(IN PRTMP_ADAPTER pAd);
BOOLEAN ScanRunning(IN PRTMP_ADAPTER pAd);
-//=========================================
+/*========================================= */
VOID MlmeCntlInit(IN PRTMP_ADAPTER pAd,
IN STATE_MACHINE * S, OUT STATE_MACHINE_FUNC Trans[]);
@@ -3135,7 +3135,7 @@ BOOLEAN PeerAuthSanity(IN PRTMP_ADAPTER pAd,
OUT USHORT * Seq,
OUT USHORT * Status, OUT CHAR ChlgText[]);
-BOOLEAN PeerAssocRspSanity(IN PRTMP_ADAPTER pAd, IN VOID * pMsg, IN ULONG MsgLen, OUT PUCHAR pAddr2, OUT USHORT * pCapabilityInfo, OUT USHORT * pStatus, OUT USHORT * pAid, OUT UCHAR SupRate[], OUT UCHAR * pSupRateLen, OUT UCHAR ExtRate[], OUT UCHAR * pExtRateLen, OUT HT_CAPABILITY_IE * pHtCapability, OUT ADD_HT_INFO_IE * pAddHtInfo, // AP might use this additional ht info IE
+BOOLEAN PeerAssocRspSanity(IN PRTMP_ADAPTER pAd, IN VOID * pMsg, IN ULONG MsgLen, OUT PUCHAR pAddr2, OUT USHORT * pCapabilityInfo, OUT USHORT * pStatus, OUT USHORT * pAid, OUT UCHAR SupRate[], OUT UCHAR * pSupRateLen, OUT UCHAR ExtRate[], OUT UCHAR * pExtRateLen, OUT HT_CAPABILITY_IE * pHtCapability, OUT ADD_HT_INFO_IE * pAddHtInfo, /* AP might use this additional ht info IE */
OUT UCHAR * pHtCapabilityLen,
OUT UCHAR * pAddHtInfoLen,
OUT UCHAR * pNewExtChannelOffset,
@@ -3260,7 +3260,7 @@ VOID AsicSetRxAnt(IN PRTMP_ADAPTER pAd, IN UCHAR Ant);
VOID RTMPFilterCalibration(IN PRTMP_ADAPTER pAd);
#ifdef RTMP_EFUSE_SUPPORT
-//2008/09/11:KH add to support efuse<--
+/*2008/09/11:KH add to support efuse<-- */
INT set_eFuseGetFreeBlockCount_Proc(IN PRTMP_ADAPTER pAd, IN PSTRING arg);
INT set_eFusedump_Proc(IN PRTMP_ADAPTER pAd, IN PSTRING arg);
@@ -3274,28 +3274,28 @@ int RtmpEfuseSupportCheck(IN RTMP_ADAPTER * pAd);
VOID eFuseGetFreeBlockCount(IN PRTMP_ADAPTER pAd, PUINT EfuseFreeBlock);
INT eFuse_init(IN PRTMP_ADAPTER pAd);
-//2008/09/11:KH add to support efuse-->
-#endif // RTMP_EFUSE_SUPPORT //
+/*2008/09/11:KH add to support efuse--> */
+#endif /* RTMP_EFUSE_SUPPORT // */
-// add by johnli, RF power sequence setup
+/* add by johnli, RF power sequence setup */
VOID RT30xxLoadRFNormalModeSetup(IN PRTMP_ADAPTER pAd);
VOID RT30xxLoadRFSleepModeSetup(IN PRTMP_ADAPTER pAd);
VOID RT30xxReverseRFSleepModeSetup(IN PRTMP_ADAPTER pAd);
-// end johnli
+/* end johnli */
#ifdef RT3070
VOID NICInitRT3070RFRegisters(IN RTMP_ADAPTER * pAd);
-#endif // RT3070 //
+#endif /* RT3070 // */
#ifdef RT3090
VOID NICInitRT3090RFRegisters(IN RTMP_ADAPTER * pAd);
-#endif // RT3090 //
+#endif /* RT3090 // */
VOID RT30xxHaltAction(IN PRTMP_ADAPTER pAd);
VOID RT30xxSetRxAnt(IN PRTMP_ADAPTER pAd, IN UCHAR Ant);
-#endif // RT30xx //
+#endif /* RT30xx // */
VOID AsicEvaluateRxAnt(IN PRTMP_ADAPTER pAd);
@@ -3333,9 +3333,9 @@ UCHAR NextChannel(IN PRTMP_ADAPTER pAd, IN UCHAR channel);
VOID ChangeToCellPowerLimit(IN PRTMP_ADAPTER pAd,
IN UCHAR AironetCellPowerLimit);
-//
-// Prototypes of function definition in rtmp_tkip.c
-//
+/* */
+/* Prototypes of function definition in rtmp_tkip.c */
+/* */
VOID RTMPInitTkipEngine(IN PRTMP_ADAPTER pAd,
IN PUCHAR pTKey,
IN UCHAR KeyId,
@@ -3375,9 +3375,9 @@ BOOLEAN RTMPSoftDecryptAES(IN PRTMP_ADAPTER pAd,
IN PUCHAR pData,
IN ULONG DataByteCnt, IN PCIPHER_KEY pWpaKey);
-//
-// Prototypes of function definition in cmm_info.c
-//
+/* */
+/* Prototypes of function definition in cmm_info.c */
+/* */
INT RT_CfgSetCountryRegion(IN PRTMP_ADAPTER pAd, IN PSTRING arg, IN INT band);
INT RT_CfgSetWirelessMode(IN PRTMP_ADAPTER pAd, IN PSTRING arg);
@@ -3393,9 +3393,9 @@ INT RT_CfgSetWPAPSKKey(IN RTMP_ADAPTER * pAd,
IN UCHAR * pHashStr,
IN INT hashStrLen, OUT PUCHAR pPMKBuf);
-//
-// Prototypes of function definition in cmm_info.c
-//
+/* */
+/* Prototypes of function definition in cmm_info.c */
+/* */
VOID RTMPWPARemoveAllKeys(IN PRTMP_ADAPTER pAd);
VOID RTMPSetPhyMode(IN PRTMP_ADAPTER pAd, IN ULONG phymode);
@@ -3478,9 +3478,9 @@ NDIS_STATUS RTMPSoftDecryptBroadCastData(IN PRTMP_ADAPTER pAd,
VOID RTMPMakeRSNIE(IN PRTMP_ADAPTER pAd,
IN UINT AuthMode, IN UINT WepStatus, IN UCHAR apidx);
-//
-// function prototype in ap_wpa.c
-//
+/* */
+/* function prototype in ap_wpa.c */
+/* */
VOID RTMPGetTxTscFromAsic(IN PRTMP_ADAPTER pAd,
IN UCHAR apidx, OUT PUCHAR pTxTsc);
@@ -3524,7 +3524,7 @@ VOID AES_GTK_KEY_WRAP(IN UCHAR * key,
IN UCHAR * plaintext,
IN UINT32 p_len, OUT UCHAR * ciphertext);
-//typedef void (*TIMER_FUNCTION)(unsigned long);
+/*typedef void (*TIMER_FUNCTION)(unsigned long); */
/* timeout -- ms */
VOID RTMP_SetPeriodicTimer(IN NDIS_MINIPORT_TIMER * pTimer,
@@ -3675,7 +3675,7 @@ void ba_reordering_resource_release(PRTMP_ADAPTER pAd);
PSTRING rstrtok(IN PSTRING s, IN const PSTRING ct);
-////////// common ioctl functions //////////
+/*//////// common ioctl functions ////////// */
INT SetCommonHT(IN PRTMP_ADAPTER pAd);
INT WpaCheckEapCode(IN PRTMP_ADAPTER pAd,
@@ -3688,15 +3688,15 @@ int wext_notify_event_assoc(IN RTMP_ADAPTER * pAd);
BOOLEAN STARxDoneInterruptHandle(IN PRTMP_ADAPTER pAd, IN BOOLEAN argc);
-// AMPDU packet indication
+/* AMPDU packet indication */
VOID Indicate_AMPDU_Packet(IN PRTMP_ADAPTER pAd,
IN RX_BLK * pRxBlk, IN UCHAR FromWhichBSSID);
-// AMSDU packet indication
+/* AMSDU packet indication */
VOID Indicate_AMSDU_Packet(IN PRTMP_ADAPTER pAd,
IN RX_BLK * pRxBlk, IN UCHAR FromWhichBSSID);
-// Normal legacy Rx packet indication
+/* Normal legacy Rx packet indication */
VOID Indicate_Legacy_Packet(IN PRTMP_ADAPTER pAd,
IN RX_BLK * pRxBlk, IN UCHAR FromWhichBSSID);
@@ -3711,7 +3711,7 @@ void wlan_802_11_to_802_3_packet(IN PRTMP_ADAPTER pAd,
IN PUCHAR pHeader802_3,
IN UCHAR FromWhichBSSID);
-// remove LLC and get 802_3 Header
+/* remove LLC and get 802_3 Header */
#define RTMP_802_11_REMOVE_LLC_AND_CONVERT_TO_802_3(_pRxBlk, _pHeader802_3) \
{ \
PUCHAR _pRemovedLLCSNAP = NULL, _pDA, _pSA; \
@@ -3748,7 +3748,7 @@ VOID Sta_Announce_or_Forward_802_3_Packet(IN PRTMP_ADAPTER pAd,
#define ANNOUNCE_OR_FORWARD_802_3_PACKET(_pAd, _pPacket, _FromWhichBSS)\
Sta_Announce_or_Forward_802_3_Packet(_pAd, _pPacket, _FromWhichBSS);
- //announce_802_3_packet(_pAd, _pPacket);
+ /*announce_802_3_packet(_pAd, _pPacket); */
PNDIS_PACKET DuplicatePacket(IN PRTMP_ADAPTER pAd,
IN PNDIS_PACKET pPacket, IN UCHAR FromWhichBSSID);
@@ -3757,7 +3757,7 @@ PNDIS_PACKET ClonePacket(IN PRTMP_ADAPTER pAd,
IN PNDIS_PACKET pPacket,
IN PUCHAR pData, IN ULONG DataSize);
-// Normal, AMPDU or AMSDU
+/* Normal, AMPDU or AMSDU */
VOID CmmRxnonRalinkFrameIndicate(IN PRTMP_ADAPTER pAd,
IN RX_BLK * pRxBlk, IN UCHAR FromWhichBSSID);
@@ -3913,9 +3913,9 @@ INT RtmpRaDevCtrlInit(IN RTMP_ADAPTER * pAd, IN RTMP_INF_TYPE infType);
BOOLEAN RtmpRaDevCtrlExit(IN RTMP_ADAPTER * pAd);
#ifdef RTMP_MAC_PCI
-//
-// Function Prototype in cmm_data_pci.c
-//
+/* */
+/* Function Prototype in cmm_data_pci.c */
+/* */
USHORT RtmpPCI_WriteTxResource(IN PRTMP_ADAPTER pAd,
IN TX_BLK * pTxBlk,
IN BOOLEAN bIsLast, OUT USHORT * FreeNumber);
@@ -3988,12 +3988,12 @@ VOID RT28xxPciStaAsicSleepThenAutoWakeup(IN PRTMP_ADAPTER pAd,
VOID RT28xxPciMlmeRadioOn(IN PRTMP_ADAPTER pAd);
VOID RT28xxPciMlmeRadioOFF(IN PRTMP_ADAPTER pAd);
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
#ifdef RTMP_MAC_USB
-//
-// Function Prototype in rtusb_bulk.c
-//
+/* */
+/* Function Prototype in rtusb_bulk.c */
+/* */
VOID RTUSBInitTxDesc(IN PRTMP_ADAPTER pAd,
IN PTX_CONTEXT pTxContext,
IN UCHAR BulkOutPipeId, IN usb_complete_t Func);
@@ -4036,9 +4036,9 @@ VOID RTUSBInitRxDesc(IN PRTMP_ADAPTER pAd, IN PRX_CONTEXT pRxContext);
VOID RTUSBBulkRxHandle(IN unsigned long data);
-//
-// Function Prototype in rtusb_io.c
-//
+/* */
+/* Function Prototype in rtusb_io.c */
+/* */
NTSTATUS RTUSBMultiRead(IN PRTMP_ADAPTER pAd,
IN USHORT Offset, OUT PUCHAR pData, IN USHORT length);
@@ -4152,9 +4152,9 @@ VOID RTUSBMlmeHardTransmit(IN PRTMP_ADAPTER pAd, IN PMGMT_STRUC pMgmt);
INT MlmeThread(IN PVOID Context);
-//
-// Function Prototype in rtusb_data.c
-//
+/* */
+/* Function Prototype in rtusb_data.c */
+/* */
NDIS_STATUS RTUSBFreeDescriptorRequest(IN PRTMP_ADAPTER pAd,
IN UCHAR BulkOutPipeId,
IN UINT32 NumberRequired);
@@ -4167,9 +4167,9 @@ VOID RTMPWriteTxInfo(IN PRTMP_ADAPTER pAd,
IN BOOLEAN bWiv,
IN UCHAR QueueSel, IN UCHAR NextValid, IN UCHAR TxBurst);
-//
-// Function Prototype in cmm_data_usb.c
-//
+/* */
+/* Function Prototype in cmm_data_usb.c */
+/* */
USHORT RtmpUSB_WriteSubTxResource(IN PRTMP_ADAPTER pAd,
IN TX_BLK * pTxBlk,
IN BOOLEAN bIsLast, OUT USHORT * FreeNumber);
@@ -4219,7 +4219,7 @@ VOID RT28xxUsbStaAsicSleepThenAutoWakeup(IN PRTMP_ADAPTER pAd,
VOID RT28xxUsbMlmeRadioOn(IN PRTMP_ADAPTER pAd);
VOID RT28xxUsbMlmeRadioOFF(IN PRTMP_ADAPTER pAd);
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
VOID AsicTurnOffRFClk(IN PRTMP_ADAPTER pAd, IN UCHAR Channel);
@@ -4237,7 +4237,7 @@ BOOLEAN RtmpTimerQRemove(IN RTMP_ADAPTER * pAd,
void RtmpTimerQExit(IN RTMP_ADAPTER * pAd);
void RtmpTimerQInit(IN RTMP_ADAPTER * pAd);
-#endif // RTMP_TIMER_TASK_SUPPORT //
+#endif /* RTMP_TIMER_TASK_SUPPORT // */
VOID AsicStaBbpTuning(IN PRTMP_ADAPTER pAd);
@@ -4291,7 +4291,7 @@ __inline VOID VIRTUAL_IF_DOWN(PRTMP_ADAPTER pAd)
rt28xx_close(pAd->net_dev);
return;
}
-#endif // LINUX //
+#endif /* LINUX // */
/*
OS Related funciton prototype definitions.
@@ -4353,4 +4353,4 @@ int RtmpOSFileRead(IN RTMP_OS_FD osfd, IN char *pDataPtr, IN int readLen);
int RtmpOSFileWrite(IN RTMP_OS_FD osfd, IN char *pDataPtr, IN int writeLen);
-#endif // __RTMP_H__
+#endif /* __RTMP_H__ */
diff --git a/drivers/staging/rt2860/rtmp_chip.h b/drivers/staging/rt2860/rtmp_chip.h
index 7fa73e6..ea8d2ed 100644
--- a/drivers/staging/rt2860/rtmp_chip.h
+++ b/drivers/staging/rt2860/rtmp_chip.h
@@ -42,30 +42,30 @@
#ifdef RT2860
#include "chip/rt2860.h"
-#endif // RT2860 //
+#endif /* RT2860 // */
#ifdef RT2870
#include "chip/rt2870.h"
-#endif // RT2870 //
+#endif /* RT2870 // */
#ifdef RT3070
#include "chip/rt3070.h"
-#endif // RT3070 //
+#endif /* RT3070 // */
#ifdef RT3090
#include "chip/rt3090.h"
-#endif // RT3090 //
+#endif /* RT3090 // */
-// We will have a cost down version which mac version is 0x3090xxxx
-//
-// RT3090A facts
-//
-// a) 2.4 GHz
-// b) Replacement for RT3090
-// c) Internal LNA
-// d) Interference over channel #14
-// e) New BBP features (e.g., SIG re-modulation)
-//
+/* We will have a cost down version which mac version is 0x3090xxxx */
+/* */
+/* RT3090A facts */
+/* */
+/* a) 2.4 GHz */
+/* b) Replacement for RT3090 */
+/* c) Internal LNA */
+/* d) Interference over channel #14 */
+/* e) New BBP features (e.g., SIG re-modulation) */
+/* */
#define IS_RT3090A(_pAd) ((((_pAd)->MACVersion & 0xffff0000) == 0x30900000))
-// We will have a cost down version which mac version is 0x3090xxxx
+/* We will have a cost down version which mac version is 0x3090xxxx */
#define IS_RT3090(_pAd) ((((_pAd)->MACVersion & 0xffff0000) == 0x30710000) || (IS_RT3090A(_pAd)))
#define IS_RT3070(_pAd) (((_pAd)->MACVersion & 0xffff0000) == 0x30700000)
@@ -73,28 +73,28 @@
#define IS_RT2070(_pAd) (((_pAd)->RfIcType == RFIC_2020) || ((_pAd)->EFuseTag == 0x27))
#define IS_RT30xx(_pAd) (((_pAd)->MACVersion & 0xfff00000) == 0x30700000||IS_RT3090A(_pAd))
-//#define IS_RT305X(_pAd) ((_pAd)->MACVersion == 0x28720200)
+/*#define IS_RT305X(_pAd) ((_pAd)->MACVersion == 0x28720200) */
/* RT3572, 3592, 3562, 3062 share the same MAC version */
#define IS_RT3572(_pAd) (((_pAd)->MACVersion & 0xffff0000) == 0x35720000)
#define IS_VERSION_BEFORE_F(_pAd) (((_pAd)->MACVersion&0xffff) <= 0x0211)
-// F version is 0x0212, E version is 0x0211. 309x can save more power after F version.
+/* F version is 0x0212, E version is 0x0211. 309x can save more power after F version. */
#define IS_VERSION_AFTER_F(_pAd) ((((_pAd)->MACVersion&0xffff) >= 0x0212) || (((_pAd)->b3090ESpecialChip == TRUE)))
-//
-// RT3390 facts
-//
-// a) Base on RT3090 (RF IC: RT3020)
-// b) 2.4 GHz
-// c) 1x1
-// d) Single chip
-// e) Internal components: PA and LNA
-//
-//RT3390,RT3370
+/* */
+/* RT3390 facts */
+/* */
+/* a) Base on RT3090 (RF IC: RT3020) */
+/* b) 2.4 GHz */
+/* c) 1x1 */
+/* d) Single chip */
+/* e) Internal components: PA and LNA */
+/* */
+/*RT3390,RT3370 */
#define IS_RT3390(_pAd) (((_pAd)->MACVersion & 0xFFFF0000) == 0x33900000)
-// ------------------------------------------------------
-// PCI registers - base address 0x0000
-// ------------------------------------------------------
+/* ------------------------------------------------------ */
+/* PCI registers - base address 0x0000 */
+/* ------------------------------------------------------ */
#define CHIP_PCI_CFG 0x0000
#define CHIP_PCI_EECTRL 0x0004
#define CHIP_PCI_MCUCTRL 0x0008
@@ -103,15 +103,15 @@
#define RETRY_LIMIT 10
-// ------------------------------------------------------
-// BBP & RF definition
-// ------------------------------------------------------
+/* ------------------------------------------------------ */
+/* BBP & RF definition */
+/* ------------------------------------------------------ */
#define BUSY 1
#define IDLE 0
-//-------------------------------------------------------------------------
-// EEPROM definition
-//-------------------------------------------------------------------------
+/*------------------------------------------------------------------------- */
+/* EEPROM definition */
+/*------------------------------------------------------------------------- */
#define EEDO 0x08
#define EEDI 0x04
#define EECS 0x02
@@ -123,11 +123,11 @@
#define EEPROM_EWDS_OPCODE 0x10
#define EEPROM_EWEN_OPCODE 0x13
-#define NUM_EEPROM_BBP_PARMS 19 // Include NIC Config 0, 1, CR, TX ALC step, BBPs
+#define NUM_EEPROM_BBP_PARMS 19 /* Include NIC Config 0, 1, CR, TX ALC step, BBPs */
#define NUM_EEPROM_TX_G_PARMS 7
-#define EEPROM_NIC1_OFFSET 0x34 // The address is from NIC config 0, not BBP register ID
-#define EEPROM_NIC2_OFFSET 0x36 // The address is from NIC config 0, not BBP register ID
-#define EEPROM_BBP_BASE_OFFSET 0xf0 // The address is from NIC config 0, not BBP register ID
+#define EEPROM_NIC1_OFFSET 0x34 /* The address is from NIC config 0, not BBP register ID */
+#define EEPROM_NIC2_OFFSET 0x36 /* The address is from NIC config 0, not BBP register ID */
+#define EEPROM_BBP_BASE_OFFSET 0xf0 /* The address is from NIC config 0, not BBP register ID */
#define EEPROM_G_TX_PWR_OFFSET 0x52
#define EEPROM_G_TX2_PWR_OFFSET 0x60
#define EEPROM_LED1_OFFSET 0x3c
@@ -139,22 +139,22 @@
#define EEPROM_RSSI_A_OFFSET 0x4a
#define EEPROM_TXMIXER_GAIN_5G 0x4c
#define EEPROM_DEFINE_MAX_TXPWR 0x4e
-#define EEPROM_TXPOWER_BYRATE_20MHZ_2_4G 0xde // 20MHZ 2.4G tx power.
-#define EEPROM_TXPOWER_BYRATE_40MHZ_2_4G 0xee // 40MHZ 2.4G tx power.
-#define EEPROM_TXPOWER_BYRATE_20MHZ_5G 0xfa // 20MHZ 5G tx power.
-#define EEPROM_TXPOWER_BYRATE_40MHZ_5G 0x10a // 40MHZ 5G tx power.
+#define EEPROM_TXPOWER_BYRATE_20MHZ_2_4G 0xde /* 20MHZ 2.4G tx power. */
+#define EEPROM_TXPOWER_BYRATE_40MHZ_2_4G 0xee /* 40MHZ 2.4G tx power. */
+#define EEPROM_TXPOWER_BYRATE_20MHZ_5G 0xfa /* 20MHZ 5G tx power. */
+#define EEPROM_TXPOWER_BYRATE_40MHZ_5G 0x10a /* 40MHZ 5G tx power. */
#define EEPROM_A_TX_PWR_OFFSET 0x78
#define EEPROM_A_TX2_PWR_OFFSET 0xa6
-//#define EEPROM_Japan_TX_PWR_OFFSET 0x90 // 802.11j
-//#define EEPROM_Japan_TX2_PWR_OFFSET 0xbe
-//#define EEPROM_TSSI_REF_OFFSET 0x54
-//#define EEPROM_TSSI_DELTA_OFFSET 0x24
-//#define EEPROM_CCK_TX_PWR_OFFSET 0x62
-//#define EEPROM_CALIBRATE_OFFSET 0x7c
+/*#define EEPROM_Japan_TX_PWR_OFFSET 0x90 // 802.11j */
+/*#define EEPROM_Japan_TX2_PWR_OFFSET 0xbe */
+/*#define EEPROM_TSSI_REF_OFFSET 0x54 */
+/*#define EEPROM_TSSI_DELTA_OFFSET 0x24 */
+/*#define EEPROM_CCK_TX_PWR_OFFSET 0x62 */
+/*#define EEPROM_CALIBRATE_OFFSET 0x7c */
#define EEPROM_VERSION_OFFSET 0x02
#define EEPROM_FREQ_OFFSET 0x3a
-#define EEPROM_TXPOWER_BYRATE 0xde // 20MHZ power.
-#define EEPROM_TXPOWER_DELTA 0x50 // 20MHZ AND 40 MHZ use different power. This is delta in 40MHZ.
+#define EEPROM_TXPOWER_BYRATE 0xde /* 20MHZ power. */
+#define EEPROM_TXPOWER_DELTA 0x50 /* 20MHZ AND 40 MHZ use different power. This is delta in 40MHZ. */
#define VALID_EEPROM_VERSION 1
/*
@@ -163,13 +163,13 @@
#define RT28xx_EEPROM_READ16(_pAd, _offset, _value) \
(_pAd)->chipOps.eeread((RTMP_ADAPTER *)(_pAd), (USHORT)(_offset), (PUSHORT)&(_value))
-// -------------------------------------------------------------------
-// E2PROM data layout
-// -------------------------------------------------------------------
+/* ------------------------------------------------------------------- */
+/* E2PROM data layout */
+/* ------------------------------------------------------------------- */
-//
-// MCU_LEDCS: MCU LED Control Setting.
-//
+/* */
+/* MCU_LEDCS: MCU LED Control Setting. */
+/* */
typedef union _MCU_LEDCS_STRUC {
struct {
UCHAR LedMode:7;
@@ -178,14 +178,14 @@ typedef union _MCU_LEDCS_STRUC {
UCHAR word;
} MCU_LEDCS_STRUC, *PMCU_LEDCS_STRUC;
-//
-// EEPROM antenna select format
-//
+/* */
+/* EEPROM antenna select format */
+/* */
typedef union _EEPROM_ANTENNA_STRUC {
struct {
- USHORT RxPath:4; // 1: 1R, 2: 2R, 3: 3R
- USHORT TxPath:4; // 1: 1T, 2: 2T
- USHORT RfIcType:4; // see E2PROM document
+ USHORT RxPath:4; /* 1: 1R, 2: 2R, 3: 3R */
+ USHORT TxPath:4; /* 1: 1T, 2: 2T */
+ USHORT RfIcType:4; /* see E2PROM document */
USHORT Rsv:4;
} field;
USHORT word;
@@ -193,66 +193,66 @@ typedef union _EEPROM_ANTENNA_STRUC {
typedef union _EEPROM_NIC_CINFIG2_STRUC {
struct {
- USHORT HardwareRadioControl:1; // 1:enable, 0:disable
- USHORT DynamicTxAgcControl:1; //
- USHORT ExternalLNAForG:1; //
- USHORT ExternalLNAForA:1; // external LNA enable for 2.4G
- USHORT CardbusAcceleration:1; // !!! NOTE: 0 - enable, 1 - disable
+ USHORT HardwareRadioControl:1; /* 1:enable, 0:disable */
+ USHORT DynamicTxAgcControl:1; /* */
+ USHORT ExternalLNAForG:1; /* */
+ USHORT ExternalLNAForA:1; /* external LNA enable for 2.4G */
+ USHORT CardbusAcceleration:1; /* !!! NOTE: 0 - enable, 1 - disable */
USHORT BW40MSidebandForG:1;
USHORT BW40MSidebandForA:1;
- USHORT EnableWPSPBC:1; // WPS PBC Control bit
- USHORT BW40MAvailForG:1; // 0:enable, 1:disable
- USHORT BW40MAvailForA:1; // 0:enable, 1:disable
- USHORT Rsv1:1; // must be 0
- USHORT AntDiversity:1; // Antenna diversity
- USHORT Rsv2:3; // must be 0
- USHORT DACTestBit:1; // control if driver should patch the DAC issue
+ USHORT EnableWPSPBC:1; /* WPS PBC Control bit */
+ USHORT BW40MAvailForG:1; /* 0:enable, 1:disable */
+ USHORT BW40MAvailForA:1; /* 0:enable, 1:disable */
+ USHORT Rsv1:1; /* must be 0 */
+ USHORT AntDiversity:1; /* Antenna diversity */
+ USHORT Rsv2:3; /* must be 0 */
+ USHORT DACTestBit:1; /* control if driver should patch the DAC issue */
} field;
USHORT word;
} EEPROM_NIC_CONFIG2_STRUC, *PEEPROM_NIC_CONFIG2_STRUC;
-//
-// TX_PWR Value valid range 0xFA(-6) ~ 0x24(36)
-//
+/* */
+/* TX_PWR Value valid range 0xFA(-6) ~ 0x24(36) */
+/* */
typedef union _EEPROM_TX_PWR_STRUC {
struct {
- CHAR Byte0; // Low Byte
- CHAR Byte1; // High Byte
+ CHAR Byte0; /* Low Byte */
+ CHAR Byte1; /* High Byte */
} field;
USHORT word;
} EEPROM_TX_PWR_STRUC, *PEEPROM_TX_PWR_STRUC;
typedef union _EEPROM_VERSION_STRUC {
struct {
- UCHAR FaeReleaseNumber; // Low Byte
- UCHAR Version; // High Byte
+ UCHAR FaeReleaseNumber; /* Low Byte */
+ UCHAR Version; /* High Byte */
} field;
USHORT word;
} EEPROM_VERSION_STRUC, *PEEPROM_VERSION_STRUC;
typedef union _EEPROM_LED_STRUC {
struct {
- USHORT PolarityRDY_G:1; // Polarity RDY_G setting.
- USHORT PolarityRDY_A:1; // Polarity RDY_A setting.
- USHORT PolarityACT:1; // Polarity ACT setting.
- USHORT PolarityGPIO_0:1; // Polarity GPIO#0 setting.
- USHORT PolarityGPIO_1:1; // Polarity GPIO#1 setting.
- USHORT PolarityGPIO_2:1; // Polarity GPIO#2 setting.
- USHORT PolarityGPIO_3:1; // Polarity GPIO#3 setting.
- USHORT PolarityGPIO_4:1; // Polarity GPIO#4 setting.
- USHORT LedMode:5; // Led mode.
- USHORT Rsvd:3; // Reserved
+ USHORT PolarityRDY_G:1; /* Polarity RDY_G setting. */
+ USHORT PolarityRDY_A:1; /* Polarity RDY_A setting. */
+ USHORT PolarityACT:1; /* Polarity ACT setting. */
+ USHORT PolarityGPIO_0:1; /* Polarity GPIO#0 setting. */
+ USHORT PolarityGPIO_1:1; /* Polarity GPIO#1 setting. */
+ USHORT PolarityGPIO_2:1; /* Polarity GPIO#2 setting. */
+ USHORT PolarityGPIO_3:1; /* Polarity GPIO#3 setting. */
+ USHORT PolarityGPIO_4:1; /* Polarity GPIO#4 setting. */
+ USHORT LedMode:5; /* Led mode. */
+ USHORT Rsvd:3; /* Reserved */
} field;
USHORT word;
} EEPROM_LED_STRUC, *PEEPROM_LED_STRUC;
typedef union _EEPROM_TXPOWER_DELTA_STRUC {
struct {
- UCHAR DeltaValue:6; // Tx Power dalta value (MAX=4)
- UCHAR Type:1; // 1: plus the delta value, 0: minus the delta value
- UCHAR TxPowerEnable:1; // Enable
+ UCHAR DeltaValue:6; /* Tx Power dalta value (MAX=4) */
+ UCHAR Type:1; /* 1: plus the delta value, 0: minus the delta value */
+ UCHAR TxPowerEnable:1; /* Enable */
} field;
UCHAR value;
} EEPROM_TXPOWER_DELTA_STRUC, *PEEPROM_TXPOWER_DELTA_STRUC;
-#endif // __RTMP_CHIP_H__ //
+#endif /* __RTMP_CHIP_H__ // */
diff --git a/drivers/staging/rt2860/rtmp_ckipmic.h b/drivers/staging/rt2860/rtmp_ckipmic.h
index ad35dca..a8108f7 100644
--- a/drivers/staging/rt2860/rtmp_ckipmic.h
+++ b/drivers/staging/rt2860/rtmp_ckipmic.h
@@ -60,4 +60,4 @@ VOID shift_row(IN PUCHAR in, OUT PUCHAR out);
VOID mix_column(IN PUCHAR in, OUT PUCHAR out);
-#endif //__RTMP_CKIPMIC_H__
+#endif /*__RTMP_CKIPMIC_H__ */
diff --git a/drivers/staging/rt2860/rtmp_def.h b/drivers/staging/rt2860/rtmp_def.h
index 31b52d6..39c27f9 100644
--- a/drivers/staging/rt2860/rtmp_def.h
+++ b/drivers/staging/rt2860/rtmp_def.h
@@ -41,9 +41,9 @@
#include "oid.h"
-//
-// Debug information verbosity: lower values indicate higher urgency
-//
+/* */
+/* Debug information verbosity: lower values indicate higher urgency */
+/* */
#define RT_DEBUG_OFF 0
#define RT_DEBUG_ERROR 1
#define RT_DEBUG_WARN 2
@@ -55,15 +55,15 @@
#define NIC_DBG_STRING ("**RT28xx**")
#ifdef RTMP_MAC_USB
-#define TX_RING_SIZE 8 // 1
+#define TX_RING_SIZE 8 /* 1 */
#define PRIO_RING_SIZE 8
-#define MGMT_RING_SIZE 32 // PRIO_RING_SIZE
+#define MGMT_RING_SIZE 32 /* PRIO_RING_SIZE */
#define RX_RING_SIZE 8
#define MAX_TX_PROCESS 4
#define LOCAL_TXBUF_SIZE 2048
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
-//#define PACKED
+/*#define PACKED */
#define RALINK_2883_VERSION ((UINT32)0x28830300)
#define RALINK_2880E_VERSION ((UINT32)0x28720200)
@@ -71,38 +71,38 @@
#define MAX_RX_PKT_LEN 1520
-//
-// Entry number for each DMA descriptor ring
-//
+/* */
+/* Entry number for each DMA descriptor ring */
+/* */
#ifdef RTMP_MAC_PCI
-#define TX_RING_SIZE 64 //64
+#define TX_RING_SIZE 64 /*64 */
#define MGMT_RING_SIZE 128
-#define RX_RING_SIZE 128 //64
-#define MAX_TX_PROCESS TX_RING_SIZE //8
+#define RX_RING_SIZE 128 /*64 */
+#define MAX_TX_PROCESS TX_RING_SIZE /*8 */
#define MAX_DMA_DONE_PROCESS TX_RING_SIZE
-#define MAX_TX_DONE_PROCESS TX_RING_SIZE //8
+#define MAX_TX_DONE_PROCESS TX_RING_SIZE /*8 */
#define LOCAL_TXBUF_SIZE 2
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
-#define MAX_RX_PROCESS 128 //64 //32
+#define MAX_RX_PROCESS 128 /*64 //32 */
#define NUM_OF_LOCAL_TXBUF 2
#define TXD_SIZE 16
#define TXWI_SIZE 16
#define RXD_SIZE 16
#define RXWI_SIZE 16
-// TXINFO_SIZE + TXWI_SIZE + 802.11 Header Size + AMSDU sub frame header
-#define TX_DMA_1ST_BUFFER_SIZE 96 // only the 1st physical buffer is pre-allocated
-#define MGMT_DMA_BUFFER_SIZE 1536 //2048
-#define RX_BUFFER_AGGRESIZE 3840 //3904 //3968 //4096 //2048 //4096
-#define RX_BUFFER_NORMSIZE 3840 //3904 //3968 //4096 //2048 //4096
+/* TXINFO_SIZE + TXWI_SIZE + 802.11 Header Size + AMSDU sub frame header */
+#define TX_DMA_1ST_BUFFER_SIZE 96 /* only the 1st physical buffer is pre-allocated */
+#define MGMT_DMA_BUFFER_SIZE 1536 /*2048 */
+#define RX_BUFFER_AGGRESIZE 3840 /*3904 //3968 //4096 //2048 //4096 */
+#define RX_BUFFER_NORMSIZE 3840 /*3904 //3968 //4096 //2048 //4096 */
#define TX_BUFFER_NORMSIZE RX_BUFFER_NORMSIZE
-#define MAX_FRAME_SIZE 2346 // Maximum 802.11 frame size
-#define MAX_AGGREGATION_SIZE 3840 //3904 //3968 //4096
+#define MAX_FRAME_SIZE 2346 /* Maximum 802.11 frame size */
+#define MAX_AGGREGATION_SIZE 3840 /*3904 //3968 //4096 */
#define MAX_NUM_OF_TUPLE_CACHE 2
#define MAX_MCAST_LIST_SIZE 32
#define MAX_LEN_OF_VENDOR_DESC 64
-//#define MAX_SIZE_OF_MCAST_PSQ (NUM_OF_LOCAL_TXBUF >> 2) // AP won't spend more than 1/4 of total buffers on M/BCAST PSQ
+/*#define MAX_SIZE_OF_MCAST_PSQ (NUM_OF_LOCAL_TXBUF >> 2) // AP won't spend more than 1/4 of total buffers on M/BCAST PSQ */
#define MAX_SIZE_OF_MCAST_PSQ 32
#define MAX_RX_PROCESS_CNT (RX_RING_SIZE)
@@ -125,27 +125,27 @@
And in rt_main_end.c, clConfig.clNum = RX_RING_SIZE * 3; is changed to
clConfig.clNum = RX_RING_SIZE * 4;
*/
-// TODO: For VxWorks the size is 256. Shall we cahnge the value as 256 for all OS?????
-#define MAX_PACKETS_IN_QUEUE (512) //(512) // to pass WMM A5-WPAPSK
+/* TODO: For VxWorks the size is 256. Shall we cahnge the value as 256 for all OS????? */
+#define MAX_PACKETS_IN_QUEUE (512) /*(512) // to pass WMM A5-WPAPSK */
#define MAX_PACKETS_IN_MCAST_PS_QUEUE 32
-#define MAX_PACKETS_IN_PS_QUEUE 128 //32
+#define MAX_PACKETS_IN_PS_QUEUE 128 /*32 */
#define WMM_NUM_OF_AC 4 /* AC0, AC1, AC2, and AC3 */
#ifdef RTMP_EFUSE_SUPPORT
-//2008/09/11:KH add to support efuse<--
+/*2008/09/11:KH add to support efuse<-- */
#define MAX_EEPROM_BIN_FILE_SIZE 1024
#define EFUSE_BUFFER_PATH "/tmp/RT30xxEEPROM.bin"
-//2008/09/11:KH add to support efuse-->
-#endif // RTMP_EFUSE_SUPPORT //
+/*2008/09/11:KH add to support efuse--> */
+#endif /* RTMP_EFUSE_SUPPORT // */
-// RxFilter
+/* RxFilter */
#define STANORMAL 0x17f97
#define APNORMAL 0x15f97
#define PSPXLINK 0x17f93
-//
-// RTMP_ADAPTER flags
-//
+/* */
+/* RTMP_ADAPTER flags */
+/* */
#define fRTMP_ADAPTER_MAP_REGISTER 0x00000001
#define fRTMP_ADAPTER_INTERRUPT_IN_USE 0x00000002
#define fRTMP_ADAPTER_HARDWARE_ERROR 0x00000004
@@ -171,13 +171,13 @@
#define fRTMP_ADAPTER_SCAN_2040 0x04000000
#define fRTMP_ADAPTER_RADIO_MEASUREMENT 0x08000000
-#define fRTMP_ADAPTER_START_UP 0x10000000 //Devive already initialized and enabled Tx/Rx.
+#define fRTMP_ADAPTER_START_UP 0x10000000 /*Devive already initialized and enabled Tx/Rx. */
#define fRTMP_ADAPTER_MEDIA_STATE_CHANGE 0x20000000
#define fRTMP_ADAPTER_IDLE_RADIO_OFF 0x40000000
-//
-// STA operation status flags
-//
+/* */
+/* STA operation status flags */
+/* */
#define fOP_STATUS_INFRA_ON 0x00000001
#define fOP_STATUS_ADHOC_ON 0x00000002
#define fOP_STATUS_BG_PROTECTION_INUSED 0x00000004
@@ -187,8 +187,8 @@
#define fOP_STATUS_MEDIA_STATE_CONNECTED 0x00000080
#define fOP_STATUS_WMM_INUSED 0x00000100
#define fOP_STATUS_AGGREGATION_INUSED 0x00000200
-#define fOP_STATUS_DOZE 0x00000400 // debug purpose
-#define fOP_STATUS_PIGGYBACK_INUSED 0x00000800 // piggy-back, and aggregation
+#define fOP_STATUS_DOZE 0x00000400 /* debug purpose */
+#define fOP_STATUS_PIGGYBACK_INUSED 0x00000800 /* piggy-back, and aggregation */
#define fOP_STATUS_APSD_INUSED 0x00001000
#define fOP_STATUS_TX_AMSDU_INUSED 0x00002000
#define fOP_STATUS_MAX_RETRY_ENABLED 0x00004000
@@ -196,25 +196,25 @@
#define fOP_STATUS_PCIE_DEVICE 0x00020000
#define fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE fOP_STATUS_PCIE_DEVICE
-//
-// RTMP_ADAPTER PSFlags : related to advanced power save.
-//
-// Indicate whether driver can go to sleep mode from now. This flag is useful AFTER link up
+/* */
+/* RTMP_ADAPTER PSFlags : related to advanced power save. */
+/* */
+/* Indicate whether driver can go to sleep mode from now. This flag is useful AFTER link up */
#define fRTMP_PS_CAN_GO_SLEEP 0x00000001
-// Indicate whether driver has issue a LinkControl command to PCIe L1
+/* Indicate whether driver has issue a LinkControl command to PCIe L1 */
#define fRTMP_PS_SET_PCI_CLK_OFF_COMMAND 0x00000002
-// Indicate driver should disable kick off hardware to send packets from now.
+/* Indicate driver should disable kick off hardware to send packets from now. */
#define fRTMP_PS_DISABLE_TX 0x00000004
-// Indicate driver should IMMEDIATELY fo to sleep after receiving AP's beacon in which doesn't indicate unicate nor multicast packets for me
-//. This flag is used ONLY in RTMPHandleRxDoneInterrupt routine.
+/* Indicate driver should IMMEDIATELY fo to sleep after receiving AP's beacon in which doesn't indicate unicate nor multicast packets for me */
+/*. This flag is used ONLY in RTMPHandleRxDoneInterrupt routine. */
#define fRTMP_PS_GO_TO_SLEEP_NOW 0x00000008
-#define fRTMP_PS_TOGGLE_L1 0x00000010 // Use Toggle L1 mechanism for rt28xx PCIe
+#define fRTMP_PS_TOGGLE_L1 0x00000010 /* Use Toggle L1 mechanism for rt28xx PCIe */
#ifdef RT3090
#define WAKE_MCU_CMD 0x31
#define SLEEP_MCU_CMD 0x30
#define RFOFF_MCU_CMD 0x35
-#endif // RT3090 //
+#endif /* RT3090 // */
#define CCKSETPROTECT 0x1
#define OFDMSETPROTECT 0x2
@@ -224,12 +224,12 @@
#define GR40SETPROTECT 0x20
#define ALLN_SETPROTECT (GR40SETPROTECT | GF20SETPROTECT | MM40SETPROTECT | MM20SETPROTECT)
-//
-// AP's client table operation status flags
-//
-#define fCLIENT_STATUS_WMM_CAPABLE 0x00000001 // CLIENT can parse QOS DATA frame
-#define fCLIENT_STATUS_AGGREGATION_CAPABLE 0x00000002 // CLIENT can receive Ralink's proprietary TX aggregation frame
-#define fCLIENT_STATUS_PIGGYBACK_CAPABLE 0x00000004 // CLIENT support piggy-back
+/* */
+/* AP's client table operation status flags */
+/* */
+#define fCLIENT_STATUS_WMM_CAPABLE 0x00000001 /* CLIENT can parse QOS DATA frame */
+#define fCLIENT_STATUS_AGGREGATION_CAPABLE 0x00000002 /* CLIENT can receive Ralink's proprietary TX aggregation frame */
+#define fCLIENT_STATUS_PIGGYBACK_CAPABLE 0x00000004 /* CLIENT support piggy-back */
#define fCLIENT_STATUS_AMSDU_INUSED 0x00000008
#define fCLIENT_STATUS_SGI20_CAPABLE 0x00000010
#define fCLIENT_STATUS_SGI40_CAPABLE 0x00000020
@@ -241,45 +241,45 @@
#define fCLIENT_STATUS_APSD_CAPABLE 0x00000800 /* UAPSD STATION */
#define fCLIENT_STATUS_RALINK_CHIPSET 0x00100000
-//
-// STA configuration flags
-//
+/* */
+/* STA configuration flags */
+/* */
-// 802.11n Operating Mode Definition. 0-3 also used in ASICUPdateProtect switch case
+/* 802.11n Operating Mode Definition. 0-3 also used in ASICUPdateProtect switch case */
#define HT_NO_PROTECT 0
#define HT_LEGACY_PROTECT 1
#define HT_40_PROTECT 2
#define HT_2040_PROTECT 3
#define HT_RTSCTS_6M 7
-//following is our own definition in order to turn on our ASIC protection register in INFRASTRUCTURE.
-#define HT_ATHEROS 8 // rt2860c has problem with atheros chip. we need to turn on RTS/CTS .
-#define HT_FORCERTSCTS 9 // Force turn on RTS/CTS first. then go to evaluate if this force RTS is necessary.
+/*following is our own definition in order to turn on our ASIC protection register in INFRASTRUCTURE. */
+#define HT_ATHEROS 8 /* rt2860c has problem with atheros chip. we need to turn on RTS/CTS . */
+#define HT_FORCERTSCTS 9 /* Force turn on RTS/CTS first. then go to evaluate if this force RTS is necessary. */
-//
-// RX Packet Filter control flags. Apply on pAd->PacketFilter
-//
+/* */
+/* RX Packet Filter control flags. Apply on pAd->PacketFilter */
+/* */
#define fRX_FILTER_ACCEPT_DIRECT NDIS_PACKET_TYPE_DIRECTED
#define fRX_FILTER_ACCEPT_MULTICAST NDIS_PACKET_TYPE_MULTICAST
#define fRX_FILTER_ACCEPT_BROADCAST NDIS_PACKET_TYPE_BROADCAST
#define fRX_FILTER_ACCEPT_ALL_MULTICAST NDIS_PACKET_TYPE_ALL_MULTICAST
#define fRX_FILTER_ACCEPT_PROMISCUOUS NDIS_PACKET_TYPE_PROMISCUOUS
-//
-// Error code section
-//
-// NDIS_ERROR_CODE_ADAPTER_NOT_FOUND
+/* */
+/* Error code section */
+/* */
+/* NDIS_ERROR_CODE_ADAPTER_NOT_FOUND */
#define ERRLOG_READ_PCI_SLOT_FAILED 0x00000101L
#define ERRLOG_WRITE_PCI_SLOT_FAILED 0x00000102L
#define ERRLOG_VENDOR_DEVICE_NOMATCH 0x00000103L
-// NDIS_ERROR_CODE_ADAPTER_DISABLED
+/* NDIS_ERROR_CODE_ADAPTER_DISABLED */
#define ERRLOG_BUS_MASTER_DISABLED 0x00000201L
-// NDIS_ERROR_CODE_UNSUPPORTED_CONFIGURATION
+/* NDIS_ERROR_CODE_UNSUPPORTED_CONFIGURATION */
#define ERRLOG_INVALID_SPEED_DUPLEX 0x00000301L
#define ERRLOG_SET_SECONDARY_FAILED 0x00000302L
-// NDIS_ERROR_CODE_OUT_OF_RESOURCES
+/* NDIS_ERROR_CODE_OUT_OF_RESOURCES */
#define ERRLOG_OUT_OF_MEMORY 0x00000401L
#define ERRLOG_OUT_OF_SHARED_MEMORY 0x00000402L
#define ERRLOG_OUT_OF_MAP_REGISTERS 0x00000403L
@@ -289,21 +289,21 @@
#define ERRLOG_OUT_OF_NDIS_PACKET 0x00000407L
#define ERRLOG_OUT_OF_LOOKASIDE_MEMORY 0x00000408L
-// NDIS_ERROR_CODE_HARDWARE_FAILURE
+/* NDIS_ERROR_CODE_HARDWARE_FAILURE */
#define ERRLOG_SELFTEST_FAILED 0x00000501L
#define ERRLOG_INITIALIZE_ADAPTER 0x00000502L
#define ERRLOG_REMOVE_MINIPORT 0x00000503L
-// NDIS_ERROR_CODE_RESOURCE_CONFLICT
+/* NDIS_ERROR_CODE_RESOURCE_CONFLICT */
#define ERRLOG_MAP_IO_SPACE 0x00000601L
#define ERRLOG_QUERY_ADAPTER_RESOURCES 0x00000602L
#define ERRLOG_NO_IO_RESOURCE 0x00000603L
#define ERRLOG_NO_INTERRUPT_RESOURCE 0x00000604L
#define ERRLOG_NO_MEMORY_RESOURCE 0x00000605L
-// WDS definition
+/* WDS definition */
#define MAX_WDS_ENTRY 4
-#define WDS_PAIRWISE_KEY_OFFSET 60 // WDS links uses pairwise key#60 ~ 63 in ASIC pairwise key table
+#define WDS_PAIRWISE_KEY_OFFSET 60 /* WDS links uses pairwise key#60 ~ 63 in ASIC pairwise key table */
#define WDS_DISABLE_MODE 0
#define WDS_RESTRICT_MODE 1
@@ -319,7 +319,7 @@
#ifdef MBSS_SUPPORT
#undef MAX_MBSSID_NUM
#define MAX_MBSSID_NUM (8 - MAX_MESH_NUM - MAX_APCLI_NUM)
-#endif // MBSS_SUPPORT //
+#endif /* MBSS_SUPPORT // */
/* sanity check for apidx */
#define MBSS_MR_APIDX_SANITY_CHECK(apidx) \
@@ -333,10 +333,10 @@
#define FIRST_MBSSID 1
#define MAX_BEACON_SIZE 512
-// If the MAX_MBSSID_NUM is larger than 6,
-// it shall reserve some WCID space(wcid 222~253) for beacon frames.
-// - these wcid 238~253 are reserved for beacon#6(ra6).
-// - these wcid 222~237 are reserved for beacon#7(ra7).
+/* If the MAX_MBSSID_NUM is larger than 6, */
+/* it shall reserve some WCID space(wcid 222~253) for beacon frames. */
+/* - these wcid 238~253 are reserved for beacon#6(ra6). */
+/* - these wcid 222~237 are reserved for beacon#7(ra7). */
#if defined(MAX_MBSSID_NUM) && (MAX_MBSSID_NUM == 8)
#define HW_RESERVED_WCID 222
#elif defined(MAX_MBSSID_NUM) && (MAX_MBSSID_NUM == 7)
@@ -345,17 +345,17 @@
#define HW_RESERVED_WCID 255
#endif
-// Then dedicate wcid of DFS and Carrier-Sense.
+/* Then dedicate wcid of DFS and Carrier-Sense. */
#define DFS_CTS_WCID (HW_RESERVED_WCID - 1)
#define CS_CTS_WCID (HW_RESERVED_WCID - 2)
#define LAST_SPECIFIC_WCID (HW_RESERVED_WCID - 2)
-// If MAX_MBSSID_NUM is 8, the maximum available wcid for the associated STA is 211.
-// If MAX_MBSSID_NUM is 7, the maximum available wcid for the associated STA is 228.
+/* If MAX_MBSSID_NUM is 8, the maximum available wcid for the associated STA is 211. */
+/* If MAX_MBSSID_NUM is 7, the maximum available wcid for the associated STA is 228. */
#define MAX_AVAILABLE_CLIENT_WCID (LAST_SPECIFIC_WCID - MAX_MBSSID_NUM - 1)
-// TX need WCID to find Cipher Key
-// these wcid 212 ~ 219 are reserved for bc/mc packets if MAX_MBSSID_NUM is 8.
+/* TX need WCID to find Cipher Key */
+/* these wcid 212 ~ 219 are reserved for bc/mc packets if MAX_MBSSID_NUM is 8. */
#define GET_GroupKey_WCID(__wcid, __bssidx) \
{ \
__wcid = LAST_SPECIFIC_WCID - (MAX_MBSSID_NUM) + __bssidx; \
@@ -363,7 +363,7 @@
#define IsGroupKeyWCID(__wcid) (((__wcid) < LAST_SPECIFIC_WCID) && ((__wcid) >= (LAST_SPECIFIC_WCID - (MAX_MBSSID_NUM))))
-// definition to support multiple BSSID
+/* definition to support multiple BSSID */
#define BSS0 0
#define BSS1 1
#define BSS2 2
@@ -373,26 +373,26 @@
#define BSS6 6
#define BSS7 7
-//============================================================
-// Length definitions
+/*============================================================ */
+/* Length definitions */
#define PEER_KEY_NO 2
#define MAC_ADDR_LEN 6
#define TIMESTAMP_LEN 8
-#define MAX_LEN_OF_SUPPORTED_RATES MAX_LENGTH_OF_SUPPORT_RATES // 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54
-#define MAX_LEN_OF_KEY 32 // 32 octets == 256 bits, Redefine for WPA
-#define MAX_NUM_OF_CHANNELS MAX_NUM_OF_CHS // 14 channels @2.4G + 12 at UNII + 4 @MMAC + 11 @HiperLAN2 + 7 @Japan + 1 as NULL termination
-#define MAX_NUM_OF_11JCHANNELS 20 // 14 channels @2.4G + 12 at UNII + 4 @MMAC + 11 @HiperLAN2 + 7 @Japan + 1 as NULL termination
+#define MAX_LEN_OF_SUPPORTED_RATES MAX_LENGTH_OF_SUPPORT_RATES /* 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54 */
+#define MAX_LEN_OF_KEY 32 /* 32 octets == 256 bits, Redefine for WPA */
+#define MAX_NUM_OF_CHANNELS MAX_NUM_OF_CHS /* 14 channels @2.4G + 12 at UNII + 4 @MMAC + 11 @HiperLAN2 + 7 @Japan + 1 as NULL termination */
+#define MAX_NUM_OF_11JCHANNELS 20 /* 14 channels @2.4G + 12 at UNII + 4 @MMAC + 11 @HiperLAN2 + 7 @Japan + 1 as NULL termination */
#define MAX_LEN_OF_SSID 32
#define CIPHER_TEXT_LEN 128
#define HASH_TABLE_SIZE 256
-#define MAX_VIE_LEN 1024 // New for WPA cipher suite variable IE sizes.
+#define MAX_VIE_LEN 1024 /* New for WPA cipher suite variable IE sizes. */
#define MAX_SUPPORT_MCS 32
#define MAX_NUM_OF_BBP_LATCH 140
-//============================================================
-// ASIC WCID Table definition.
-//============================================================
-#define BSSID_WCID 1 // in infra mode, always put bssid with this WCID
+/*============================================================ */
+/* ASIC WCID Table definition. */
+/*============================================================ */
+#define BSSID_WCID 1 /* in infra mode, always put bssid with this WCID */
#define MCAST_WCID 0x0
#define BSS0Mcast_WCID 0x0
#define BSS1Mcast_WCID 0xf8
@@ -406,7 +406,7 @@
#define MAX_NUM_OF_ACL_LIST MAX_NUMBER_OF_ACL
-#define MAX_LEN_OF_MAC_TABLE MAX_NUMBER_OF_MAC // if MAX_MBSSID_NUM is 8, this value can't be larger than 211
+#define MAX_LEN_OF_MAC_TABLE MAX_NUMBER_OF_MAC /* if MAX_MBSSID_NUM is 8, this value can't be larger than 211 */
#if MAX_LEN_OF_MAC_TABLE>MAX_AVAILABLE_CLIENT_WCID
#error MAX_LEN_OF_MAC_TABLE can not be larger than MAX_AVAILABLE_CLIENT_WCID!!!!
@@ -419,38 +419,38 @@
#define NUM_OF_TID 8
#define MAX_AID_BA 4
-#define MAX_LEN_OF_BA_REC_TABLE ((NUM_OF_TID * MAX_LEN_OF_MAC_TABLE)/2) // (NUM_OF_TID*MAX_AID_BA + 32) //Block ACK recipient
-#define MAX_LEN_OF_BA_ORI_TABLE ((NUM_OF_TID * MAX_LEN_OF_MAC_TABLE)/2) // (NUM_OF_TID*MAX_AID_BA + 32) // Block ACK originator
+#define MAX_LEN_OF_BA_REC_TABLE ((NUM_OF_TID * MAX_LEN_OF_MAC_TABLE)/2) /* (NUM_OF_TID*MAX_AID_BA + 32) //Block ACK recipient */
+#define MAX_LEN_OF_BA_ORI_TABLE ((NUM_OF_TID * MAX_LEN_OF_MAC_TABLE)/2) /* (NUM_OF_TID*MAX_AID_BA + 32) // Block ACK originator */
#define MAX_LEN_OF_BSS_TABLE 64
#define MAX_REORDERING_MPDU_NUM 512
-// key related definitions
+/* key related definitions */
#define SHARE_KEY_NUM 4
-#define MAX_LEN_OF_SHARE_KEY 16 // byte count
-#define MAX_LEN_OF_PEER_KEY 16 // byte count
-#define PAIRWISE_KEY_NUM 64 // in MAC ASIC pairwise key table
+#define MAX_LEN_OF_SHARE_KEY 16 /* byte count */
+#define MAX_LEN_OF_PEER_KEY 16 /* byte count */
+#define PAIRWISE_KEY_NUM 64 /* in MAC ASIC pairwise key table */
#define GROUP_KEY_NUM 4
#define PMK_LEN 32
-#define WDS_PAIRWISE_KEY_OFFSET 60 // WDS links uses pairwise key#60 ~ 63 in ASIC pairwise key table
-#define PMKID_NO 4 // Number of PMKID saved supported
+#define WDS_PAIRWISE_KEY_OFFSET 60 /* WDS links uses pairwise key#60 ~ 63 in ASIC pairwise key table */
+#define PMKID_NO 4 /* Number of PMKID saved supported */
#define MAX_LEN_OF_MLME_BUFFER 2048
-// power status related definitions
+/* power status related definitions */
#define PWR_ACTIVE 0
#define PWR_SAVE 1
-#define PWR_MMPS 2 //MIMO power save
+#define PWR_MMPS 2 /*MIMO power save */
-// Auth and Assoc mode related definitions
+/* Auth and Assoc mode related definitions */
#define AUTH_MODE_OPEN 0x00
#define AUTH_MODE_KEY 0x01
-// BSS Type definitions
-#define BSS_ADHOC 0 // = Ndis802_11IBSS
-#define BSS_INFRA 1 // = Ndis802_11Infrastructure
-#define BSS_ANY 2 // = Ndis802_11AutoUnknown
-#define BSS_MONITOR 3 // = Ndis802_11Monitor
+/* BSS Type definitions */
+#define BSS_ADHOC 0 /* = Ndis802_11IBSS */
+#define BSS_INFRA 1 /* = Ndis802_11Infrastructure */
+#define BSS_ANY 2 /* = Ndis802_11AutoUnknown */
+#define BSS_MONITOR 3 /* = Ndis802_11Monitor */
-// Reason code definitions
+/* Reason code definitions */
#define REASON_RESERVED 0
#define REASON_UNSPECIFY 1
#define REASON_NO_LONGER_VALID 2
@@ -485,7 +485,7 @@
#define REASON_QOS_REQUEST_TIMEOUT 39
#define REASON_QOS_CIPHER_NOT_SUPPORT 45
-// Status code definitions
+/* Status code definitions */
#define MLME_SUCCESS 0
#define MLME_UNSPECIFY_FAIL 1
#define MLME_CANNOT_SUPPORT_CAP 10
@@ -517,7 +517,7 @@
#define MLME_STATE_MACHINE_REJECT 0x53
#define MLME_MAC_TABLE_FAIL 0x54
-// IE code
+/* IE code */
#define IE_SSID 0
#define IE_SUPP_RATES 1
#define IE_FH_PARM 2
@@ -525,83 +525,83 @@
#define IE_CF_PARM 4
#define IE_TIM 5
#define IE_IBSS_PARM 6
-#define IE_COUNTRY 7 // 802.11d
-#define IE_802_11D_REQUEST 10 // 802.11d
-#define IE_QBSS_LOAD 11 // 802.11e d9
-#define IE_EDCA_PARAMETER 12 // 802.11e d9
-#define IE_TSPEC 13 // 802.11e d9
-#define IE_TCLAS 14 // 802.11e d9
-#define IE_SCHEDULE 15 // 802.11e d9
+#define IE_COUNTRY 7 /* 802.11d */
+#define IE_802_11D_REQUEST 10 /* 802.11d */
+#define IE_QBSS_LOAD 11 /* 802.11e d9 */
+#define IE_EDCA_PARAMETER 12 /* 802.11e d9 */
+#define IE_TSPEC 13 /* 802.11e d9 */
+#define IE_TCLAS 14 /* 802.11e d9 */
+#define IE_SCHEDULE 15 /* 802.11e d9 */
#define IE_CHALLENGE_TEXT 16
-#define IE_POWER_CONSTRAINT 32 // 802.11h d3.3
-#define IE_POWER_CAPABILITY 33 // 802.11h d3.3
-#define IE_TPC_REQUEST 34 // 802.11h d3.3
-#define IE_TPC_REPORT 35 // 802.11h d3.3
-#define IE_SUPP_CHANNELS 36 // 802.11h d3.3
-#define IE_CHANNEL_SWITCH_ANNOUNCEMENT 37 // 802.11h d3.3
-#define IE_MEASUREMENT_REQUEST 38 // 802.11h d3.3
-#define IE_MEASUREMENT_REPORT 39 // 802.11h d3.3
-#define IE_QUIET 40 // 802.11h d3.3
-#define IE_IBSS_DFS 41 // 802.11h d3.3
-#define IE_ERP 42 // 802.11g
-#define IE_TS_DELAY 43 // 802.11e d9
-#define IE_TCLAS_PROCESSING 44 // 802.11e d9
-#define IE_QOS_CAPABILITY 46 // 802.11e d6
-#define IE_HT_CAP 45 // 802.11n d1. HT CAPABILITY. ELEMENT ID TBD
-#define IE_AP_CHANNEL_REPORT 51 // 802.11k d6
-#define IE_HT_CAP2 52 // 802.11n d1. HT CAPABILITY. ELEMENT ID TBD
-#define IE_RSN 48 // 802.11i d3.0
-#define IE_WPA2 48 // WPA2
-#define IE_EXT_SUPP_RATES 50 // 802.11g
-#define IE_SUPP_REG_CLASS 59 // 802.11y. Supported regulatory classes.
-#define IE_EXT_CHANNEL_SWITCH_ANNOUNCEMENT 60 // 802.11n
-#define IE_ADD_HT 61 // 802.11n d1. ADDITIONAL HT CAPABILITY. ELEMENT ID TBD
-#define IE_ADD_HT2 53 // 802.11n d1. ADDITIONAL HT CAPABILITY. ELEMENT ID TBD
-
-// For 802.11n D3.03
-//#define IE_NEW_EXT_CHA_OFFSET 62 // 802.11n d1. New extension channel offset elemet
-#define IE_SECONDARY_CH_OFFSET 62 // 802.11n D3.03 Secondary Channel Offset element
-#define IE_WAPI 68 // WAPI information element
-#define IE_2040_BSS_COEXIST 72 // 802.11n D3.0.3
-#define IE_2040_BSS_INTOLERANT_REPORT 73 // 802.11n D3.03
-#define IE_OVERLAPBSS_SCAN_PARM 74 // 802.11n D3.03
-#define IE_EXT_CAPABILITY 127 // 802.11n D3.03
-
-#define IE_WPA 221 // WPA
-#define IE_VENDOR_SPECIFIC 221 // Wifi WMM (WME)
-
-#define OUI_BROADCOM_HT 51 //
-#define OUI_BROADCOM_HTADD 52 //
-#define OUI_PREN_HT_CAP 51 //
-#define OUI_PREN_ADD_HT 52 //
-
-// CCX information
-#define IE_AIRONET_CKIP 133 // CCX1.0 ID 85H for CKIP
-#define IE_AP_TX_POWER 150 // CCX 2.0 for AP transmit power
-#define IE_MEASUREMENT_CAPABILITY 221 // CCX 2.0
+#define IE_POWER_CONSTRAINT 32 /* 802.11h d3.3 */
+#define IE_POWER_CAPABILITY 33 /* 802.11h d3.3 */
+#define IE_TPC_REQUEST 34 /* 802.11h d3.3 */
+#define IE_TPC_REPORT 35 /* 802.11h d3.3 */
+#define IE_SUPP_CHANNELS 36 /* 802.11h d3.3 */
+#define IE_CHANNEL_SWITCH_ANNOUNCEMENT 37 /* 802.11h d3.3 */
+#define IE_MEASUREMENT_REQUEST 38 /* 802.11h d3.3 */
+#define IE_MEASUREMENT_REPORT 39 /* 802.11h d3.3 */
+#define IE_QUIET 40 /* 802.11h d3.3 */
+#define IE_IBSS_DFS 41 /* 802.11h d3.3 */
+#define IE_ERP 42 /* 802.11g */
+#define IE_TS_DELAY 43 /* 802.11e d9 */
+#define IE_TCLAS_PROCESSING 44 /* 802.11e d9 */
+#define IE_QOS_CAPABILITY 46 /* 802.11e d6 */
+#define IE_HT_CAP 45 /* 802.11n d1. HT CAPABILITY. ELEMENT ID TBD */
+#define IE_AP_CHANNEL_REPORT 51 /* 802.11k d6 */
+#define IE_HT_CAP2 52 /* 802.11n d1. HT CAPABILITY. ELEMENT ID TBD */
+#define IE_RSN 48 /* 802.11i d3.0 */
+#define IE_WPA2 48 /* WPA2 */
+#define IE_EXT_SUPP_RATES 50 /* 802.11g */
+#define IE_SUPP_REG_CLASS 59 /* 802.11y. Supported regulatory classes. */
+#define IE_EXT_CHANNEL_SWITCH_ANNOUNCEMENT 60 /* 802.11n */
+#define IE_ADD_HT 61 /* 802.11n d1. ADDITIONAL HT CAPABILITY. ELEMENT ID TBD */
+#define IE_ADD_HT2 53 /* 802.11n d1. ADDITIONAL HT CAPABILITY. ELEMENT ID TBD */
+
+/* For 802.11n D3.03 */
+/*#define IE_NEW_EXT_CHA_OFFSET 62 // 802.11n d1. New extension channel offset elemet */
+#define IE_SECONDARY_CH_OFFSET 62 /* 802.11n D3.03 Secondary Channel Offset element */
+#define IE_WAPI 68 /* WAPI information element */
+#define IE_2040_BSS_COEXIST 72 /* 802.11n D3.0.3 */
+#define IE_2040_BSS_INTOLERANT_REPORT 73 /* 802.11n D3.03 */
+#define IE_OVERLAPBSS_SCAN_PARM 74 /* 802.11n D3.03 */
+#define IE_EXT_CAPABILITY 127 /* 802.11n D3.03 */
+
+#define IE_WPA 221 /* WPA */
+#define IE_VENDOR_SPECIFIC 221 /* Wifi WMM (WME) */
+
+#define OUI_BROADCOM_HT 51 /* */
+#define OUI_BROADCOM_HTADD 52 /* */
+#define OUI_PREN_HT_CAP 51 /* */
+#define OUI_PREN_ADD_HT 52 /* */
+
+/* CCX information */
+#define IE_AIRONET_CKIP 133 /* CCX1.0 ID 85H for CKIP */
+#define IE_AP_TX_POWER 150 /* CCX 2.0 for AP transmit power */
+#define IE_MEASUREMENT_CAPABILITY 221 /* CCX 2.0 */
#define IE_CCX_V2 221
-#define IE_AIRONET_IPADDRESS 149 // CCX ID 95H for IP Address
-#define IE_AIRONET_CCKMREASSOC 156 // CCX ID 9CH for CCKM Reassociation Request element
+#define IE_AIRONET_IPADDRESS 149 /* CCX ID 95H for IP Address */
+#define IE_AIRONET_CCKMREASSOC 156 /* CCX ID 9CH for CCKM Reassociation Request element */
#define CKIP_NEGOTIATION_LENGTH 30
#define AIRONET_IPADDRESS_LENGTH 10
#define AIRONET_CCKMREASSOC_LENGTH 24
-// ========================================================
-// MLME state machine definition
-// ========================================================
+/* ======================================================== */
+/* MLME state machine definition */
+/* ======================================================== */
-// STA MLME state mahcines
+/* STA MLME state mahcines */
#define ASSOC_STATE_MACHINE 1
#define AUTH_STATE_MACHINE 2
#define AUTH_RSP_STATE_MACHINE 3
#define SYNC_STATE_MACHINE 4
#define MLME_CNTL_STATE_MACHINE 5
#define WPA_PSK_STATE_MACHINE 6
-//#define LEAP_STATE_MACHINE 7
+/*#define LEAP_STATE_MACHINE 7 */
#define AIRONET_STATE_MACHINE 8
#define ACTION_STATE_MACHINE 9
-// AP MLME state machines
+/* AP MLME state machines */
#define AP_ASSOC_STATE_MACHINE 11
#define AP_AUTH_STATE_MACHINE 12
#define AP_SYNC_STATE_MACHINE 14
@@ -611,9 +611,9 @@
#define WPA_STATE_MACHINE 23
-//
-// STA's CONTROL/CONNECT state machine: states, events, total function #
-//
+/* */
+/* STA's CONTROL/CONNECT state machine: states, events, total function # */
+/* */
#define CNTL_IDLE 0
#define CNTL_WAIT_DISASSOC 1
#define CNTL_WAIT_JOIN 2
@@ -626,7 +626,7 @@
#define CNTL_WAIT_OID_DISASSOC 9
#ifdef RTMP_MAC_USB
#define CNTL_WAIT_SCAN_FOR_CONNECT 10
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
#define MT2_ASSOC_CONF 34
#define MT2_AUTH_CONF 35
@@ -645,9 +645,9 @@
#define CNTL_FUNC_SIZE 1
-//
-// STA's ASSOC state machine: states, events, total function #
-//
+/* */
+/* STA's ASSOC state machine: states, events, total function # */
+/* */
#define ASSOC_IDLE 0
#define ASSOC_WAIT_RSP 1
#define REASSOC_WAIT_RSP 2
@@ -670,16 +670,16 @@
#define ASSOC_FUNC_SIZE (MAX_ASSOC_STATE * MAX_ASSOC_MSG)
-//
-// ACT state machine: states, events, total function #
-//
+/* */
+/* ACT state machine: states, events, total function # */
+/* */
#define ACT_IDLE 0
#define MAX_ACT_STATE 1
#define ACT_MACHINE_BASE 0
-//Those PEER_xx_CATE number is based on real Categary value in IEEE spec. Please don'es modify it by your self.
-//Category
+/*Those PEER_xx_CATE number is based on real Categary value in IEEE spec. Please don'es modify it by your self. */
+/*Category */
#define MT2_PEER_SPECTRUM_CATE 0
#define MT2_PEER_QOS_CATE 1
#define MT2_PEER_DLS_CATE 2
@@ -687,7 +687,7 @@
#define MT2_PEER_PUBLIC_CATE 4
#define MT2_PEER_RM_CATE 5
/* "FT_CATEGORY_BSS_TRANSITION equal to 6" is defined file of "dot11r_ft.h" */
-#define MT2_PEER_HT_CATE 7 // 7.4.7
+#define MT2_PEER_HT_CATE 7 /* 7.4.7 */
#define MAX_PEER_CATE_MSG 7
#define MT2_MLME_ADD_BA_CATE 8
@@ -698,7 +698,7 @@
#define MT2_ACT_INVALID 13
#define MAX_ACT_MSG 14
-//Category field
+/*Category field */
#define CATEGORY_SPECTRUM 0
#define CATEGORY_QOS 1
#define CATEGORY_DLS 2
@@ -707,35 +707,35 @@
#define CATEGORY_RM 5
#define CATEGORY_HT 7
-// DLS Action frame definition
+/* DLS Action frame definition */
#define ACTION_DLS_REQUEST 0
#define ACTION_DLS_RESPONSE 1
#define ACTION_DLS_TEARDOWN 2
-//Spectrum Action field value 802.11h 7.4.1
-#define SPEC_MRQ 0 // Request
-#define SPEC_MRP 1 //Report
+/*Spectrum Action field value 802.11h 7.4.1 */
+#define SPEC_MRQ 0 /* Request */
+#define SPEC_MRP 1 /*Report */
#define SPEC_TPCRQ 2
#define SPEC_TPCRP 3
#define SPEC_CHANNEL_SWITCH 4
-//BA Action field value
+/*BA Action field value */
#define ADDBA_REQ 0
#define ADDBA_RESP 1
#define DELBA 2
-//Public's Action field value in Public Category. Some in 802.11y and some in 11n
-#define ACTION_BSS_2040_COEXIST 0 // 11n
-#define ACTION_DSE_ENABLEMENT 1 // 11y D9.0
-#define ACTION_DSE_DEENABLEMENT 2 // 11y D9.0
-#define ACTION_DSE_REG_LOCATION_ANNOUNCE 3 // 11y D9.0
-#define ACTION_EXT_CH_SWITCH_ANNOUNCE 4 // 11y D9.0
-#define ACTION_DSE_MEASUREMENT_REQ 5 // 11y D9.0
-#define ACTION_DSE_MEASUREMENT_REPORT 6 // 11y D9.0
-#define ACTION_MEASUREMENT_PILOT_ACTION 7 // 11y D9.0
-#define ACTION_DSE_POWER_CONSTRAINT 8 // 11y D9.0
-
-//HT Action field value
+/*Public's Action field value in Public Category. Some in 802.11y and some in 11n */
+#define ACTION_BSS_2040_COEXIST 0 /* 11n */
+#define ACTION_DSE_ENABLEMENT 1 /* 11y D9.0 */
+#define ACTION_DSE_DEENABLEMENT 2 /* 11y D9.0 */
+#define ACTION_DSE_REG_LOCATION_ANNOUNCE 3 /* 11y D9.0 */
+#define ACTION_EXT_CH_SWITCH_ANNOUNCE 4 /* 11y D9.0 */
+#define ACTION_DSE_MEASUREMENT_REQ 5 /* 11y D9.0 */
+#define ACTION_DSE_MEASUREMENT_REPORT 6 /* 11y D9.0 */
+#define ACTION_MEASUREMENT_PILOT_ACTION 7 /* 11y D9.0 */
+#define ACTION_DSE_POWER_CONSTRAINT 8 /* 11y D9.0 */
+
+/*HT Action field value */
#define NOTIFY_BW_ACTION 0
#define SMPS_ACTION 1
#define PSMP_ACTION 2
@@ -747,9 +747,9 @@
#define HT_INFO_EXCHANGE 8
#define ACT_FUNC_SIZE (MAX_ACT_STATE * MAX_ACT_MSG)
-//
-// STA's AUTHENTICATION state machine: states, evvents, total function #
-//
+/* */
+/* STA's AUTHENTICATION state machine: states, evvents, total function # */
+/* */
#define AUTH_REQ_IDLE 0
#define AUTH_WAIT_SEQ2 1
#define AUTH_WAIT_SEQ4 2
@@ -763,9 +763,9 @@
#define AUTH_FUNC_SIZE (MAX_AUTH_STATE * MAX_AUTH_MSG)
-//
-// STA's AUTH_RSP state machine: states, events, total function #
-//
+/* */
+/* STA's AUTH_RSP state machine: states, events, total function # */
+/* */
#define AUTH_RSP_IDLE 0
#define AUTH_RSP_WAIT_CHAL 1
#define MAX_AUTH_RSP_STATE 2
@@ -778,10 +778,10 @@
#define AUTH_RSP_FUNC_SIZE (MAX_AUTH_RSP_STATE * MAX_AUTH_RSP_MSG)
-//
-// STA's SYNC state machine: states, events, total function #
-//
-#define SYNC_IDLE 0 // merge NO_BSS,IBSS_IDLE,IBSS_ACTIVE and BSS in to 1 state
+/* */
+/* STA's SYNC state machine: states, events, total function # */
+/* */
+#define SYNC_IDLE 0 /* merge NO_BSS,IBSS_IDLE,IBSS_ACTIVE and BSS in to 1 state */
#define JOIN_WAIT_BEACON 1
#define SCAN_LISTEN 2
#define MAX_SYNC_STATE 3
@@ -801,7 +801,7 @@
#define SYNC_FUNC_SIZE (MAX_SYNC_STATE * MAX_SYNC_MSG)
-//Messages for the DLS state machine
+/*Messages for the DLS state machine */
#define DLS_IDLE 0
#define MAX_DLS_STATE 1
@@ -815,18 +815,18 @@
#define DLS_FUNC_SIZE (MAX_DLS_STATE * MAX_DLS_MSG)
-//
-// WSC State machine: states, events, total function #
-//
+/* */
+/* WSC State machine: states, events, total function # */
+/* */
-//
-// AP's CONTROL/CONNECT state machine: states, events, total function #
-//
+/* */
+/* AP's CONTROL/CONNECT state machine: states, events, total function # */
+/* */
#define AP_CNTL_FUNC_SIZE 1
-//
-// AP's ASSOC state machine: states, events, total function #
-//
+/* */
+/* AP's ASSOC state machine: states, events, total function # */
+/* */
#define AP_ASSOC_IDLE 0
#define AP_MAX_ASSOC_STATE 1
@@ -840,9 +840,9 @@
#define AP_ASSOC_FUNC_SIZE (AP_MAX_ASSOC_STATE * AP_MAX_ASSOC_MSG)
-//
-// AP's AUTHENTICATION state machine: states, events, total function #
-//
+/* */
+/* AP's AUTHENTICATION state machine: states, events, total function # */
+/* */
#define AP_AUTH_REQ_IDLE 0
#define AP_MAX_AUTH_STATE 1
@@ -856,9 +856,9 @@
#define AP_AUTH_FUNC_SIZE (AP_MAX_AUTH_STATE * AP_MAX_AUTH_MSG)
-//
-// AP's SYNC state machine: states, events, total function #
-//
+/* */
+/* AP's SYNC state machine: states, events, total function # */
+/* */
#define AP_SYNC_IDLE 0
#define AP_SCAN_LISTEN 1
#define AP_MAX_SYNC_STATE 2
@@ -874,9 +874,9 @@
#define AP_SYNC_FUNC_SIZE (AP_MAX_SYNC_STATE * AP_MAX_SYNC_MSG)
-//
-// Common WPA state machine: states, events, total function #
-//
+/* */
+/* Common WPA state machine: states, events, total function # */
+/* */
#define WPA_PTK 0
#define MAX_WPA_PTK_STATE 1
@@ -890,14 +890,14 @@
#define WPA_FUNC_SIZE (MAX_WPA_PTK_STATE * MAX_WPA_MSG)
-// =============================================================================
+/* ============================================================================= */
-// value domain of 802.11 header FC.Tyte, which is b3..b2 of the 1st-byte of MAC header
+/* value domain of 802.11 header FC.Tyte, which is b3..b2 of the 1st-byte of MAC header */
#define BTYPE_MGMT 0
#define BTYPE_CNTL 1
#define BTYPE_DATA 2
-// value domain of 802.11 MGMT frame's FC.subtype, which is b7..4 of the 1st-byte of MAC header
+/* value domain of 802.11 MGMT frame's FC.subtype, which is b7..4 of the 1st-byte of MAC header */
#define SUBTYPE_ASSOC_REQ 0
#define SUBTYPE_ASSOC_RSP 1
#define SUBTYPE_REASSOC_REQ 2
@@ -912,7 +912,7 @@
#define SUBTYPE_ACTION 13
#define SUBTYPE_ACTION_NO_ACK 14
-// value domain of 802.11 CNTL frame's FC.subtype, which is b7..4 of the 1st-byte of MAC header
+/* value domain of 802.11 CNTL frame's FC.subtype, which is b7..4 of the 1st-byte of MAC header */
#define SUBTYPE_WRAPPER 7
#define SUBTYPE_BLOCK_ACK_REQ 8
#define SUBTYPE_BLOCK_ACK 9
@@ -923,7 +923,7 @@
#define SUBTYPE_CFEND 14
#define SUBTYPE_CFEND_CFACK 15
-// value domain of 802.11 DATA frame's FC.subtype, which is b7..4 of the 1st-byte of MAC header
+/* value domain of 802.11 DATA frame's FC.subtype, which is b7..4 of the 1st-byte of MAC header */
#define SUBTYPE_DATA 0
#define SUBTYPE_DATA_CFACK 1
#define SUBTYPE_DATA_CFPOLL 2
@@ -941,15 +941,15 @@
#define SUBTYPE_QOS_CFPOLL 14
#define SUBTYPE_QOS_CFACK_CFPOLL 15
-// ACK policy of QOS Control field bit 6:5
-#define NORMAL_ACK 0x00 // b6:5 = 00
-#define NO_ACK 0x20 // b6:5 = 01
-#define NO_EXPLICIT_ACK 0x40 // b6:5 = 10
-#define BLOCK_ACK 0x60 // b6:5 = 11
+/* ACK policy of QOS Control field bit 6:5 */
+#define NORMAL_ACK 0x00 /* b6:5 = 00 */
+#define NO_ACK 0x20 /* b6:5 = 01 */
+#define NO_EXPLICIT_ACK 0x40 /* b6:5 = 10 */
+#define BLOCK_ACK 0x60 /* b6:5 = 11 */
-//
-// rtmp_data.c use these definition
-//
+/* */
+/* rtmp_data.c use these definition */
+/* */
#define LENGTH_802_11 24
#define LENGTH_802_11_AND_H 30
#define LENGTH_802_11_CRC_H 34
@@ -965,40 +965,40 @@
#define LENGTH_802_3_NO_TYPE 12
#define LENGTH_802_1Q 4 /* VLAN related */
-// STA_CSR4.field.TxResult
+/* STA_CSR4.field.TxResult */
#define TX_RESULT_SUCCESS 0
#define TX_RESULT_ZERO_LENGTH 1
#define TX_RESULT_UNDER_RUN 2
#define TX_RESULT_OHY_ERROR 4
#define TX_RESULT_RETRY_FAIL 6
-// All PHY rate summary in TXD
-// Preamble MODE in TxD
+/* All PHY rate summary in TXD */
+/* Preamble MODE in TxD */
#define MODE_CCK 0
#define MODE_OFDM 1
#define MODE_HTMIX 2
#define MODE_HTGREENFIELD 3
-// MCS for CCK. BW.SGI.STBC are reserved
-#define MCS_LONGP_RATE_1 0 // long preamble CCK 1Mbps
-#define MCS_LONGP_RATE_2 1 // long preamble CCK 1Mbps
+/* MCS for CCK. BW.SGI.STBC are reserved */
+#define MCS_LONGP_RATE_1 0 /* long preamble CCK 1Mbps */
+#define MCS_LONGP_RATE_2 1 /* long preamble CCK 1Mbps */
#define MCS_LONGP_RATE_5_5 2
#define MCS_LONGP_RATE_11 3
-#define MCS_SHORTP_RATE_1 4 // long preamble CCK 1Mbps. short is forbidden in 1Mbps
-#define MCS_SHORTP_RATE_2 5 // short preamble CCK 2Mbps
+#define MCS_SHORTP_RATE_1 4 /* long preamble CCK 1Mbps. short is forbidden in 1Mbps */
+#define MCS_SHORTP_RATE_2 5 /* short preamble CCK 2Mbps */
#define MCS_SHORTP_RATE_5_5 6
#define MCS_SHORTP_RATE_11 7
-// To send duplicate legacy OFDM. set BW=BW_40. SGI.STBC are reserved
-#define MCS_RATE_6 0 // legacy OFDM
-#define MCS_RATE_9 1 // OFDM
-#define MCS_RATE_12 2 // OFDM
-#define MCS_RATE_18 3 // OFDM
-#define MCS_RATE_24 4 // OFDM
-#define MCS_RATE_36 5 // OFDM
-#define MCS_RATE_48 6 // OFDM
-#define MCS_RATE_54 7 // OFDM
-// HT
-#define MCS_0 0 // 1S
+/* To send duplicate legacy OFDM. set BW=BW_40. SGI.STBC are reserved */
+#define MCS_RATE_6 0 /* legacy OFDM */
+#define MCS_RATE_9 1 /* OFDM */
+#define MCS_RATE_12 2 /* OFDM */
+#define MCS_RATE_18 3 /* OFDM */
+#define MCS_RATE_24 4 /* OFDM */
+#define MCS_RATE_36 5 /* OFDM */
+#define MCS_RATE_48 6 /* OFDM */
+#define MCS_RATE_54 7 /* OFDM */
+/* HT */
+#define MCS_0 0 /* 1S */
#define MCS_1 1
#define MCS_2 2
#define MCS_3 3
@@ -1006,7 +1006,7 @@
#define MCS_5 5
#define MCS_6 6
#define MCS_7 7
-#define MCS_8 8 // 2S
+#define MCS_8 8 /* 2S */
#define MCS_9 9
#define MCS_10 10
#define MCS_11 11
@@ -1014,7 +1014,7 @@
#define MCS_13 13
#define MCS_14 14
#define MCS_15 15
-#define MCS_16 16 // 3*3
+#define MCS_16 16 /* 3*3 */
#define MCS_17 17
#define MCS_18 18
#define MCS_19 19
@@ -1025,48 +1025,48 @@
#define MCS_32 32
#define MCS_AUTO 33
-// OID_HTPHYMODE
-// MODE
+/* OID_HTPHYMODE */
+/* MODE */
#define HTMODE_MM 0
#define HTMODE_GF 1
-// Fixed Tx MODE - HT, CCK or OFDM
+/* Fixed Tx MODE - HT, CCK or OFDM */
#define FIXED_TXMODE_HT 0
#define FIXED_TXMODE_CCK 1
#define FIXED_TXMODE_OFDM 2
-// BW
+/* BW */
#define BW_20 BAND_WIDTH_20
#define BW_40 BAND_WIDTH_40
#define BW_BOTH BAND_WIDTH_BOTH
-#define BW_10 BAND_WIDTH_10 // 802.11j has 10MHz. This definition is for internal usage. doesn't fill in the IE or other field.
+#define BW_10 BAND_WIDTH_10 /* 802.11j has 10MHz. This definition is for internal usage. doesn't fill in the IE or other field. */
-// SHORTGI
-#define GI_400 GAP_INTERVAL_400 // only support in HT mode
+/* SHORTGI */
+#define GI_400 GAP_INTERVAL_400 /* only support in HT mode */
#define GI_BOTH GAP_INTERVAL_BOTH
#define GI_800 GAP_INTERVAL_800
-// STBC
+/* STBC */
#define STBC_NONE 0
-#define STBC_USE 1 // limited use in rt2860b phy
-#define RXSTBC_ONE 1 // rx support of one spatial stream
-#define RXSTBC_TWO 2 // rx support of 1 and 2 spatial stream
-#define RXSTBC_THR 3 // rx support of 1~3 spatial stream
-// MCS FEEDBACK
-#define MCSFBK_NONE 0 // not support mcs feedback /
-#define MCSFBK_RSV 1 // reserved
-#define MCSFBK_UNSOLICIT 2 // only support unsolict mcs feedback
-#define MCSFBK_MRQ 3 // response to both MRQ and unsolict mcs feedback
-
-// MIMO power safe
+#define STBC_USE 1 /* limited use in rt2860b phy */
+#define RXSTBC_ONE 1 /* rx support of one spatial stream */
+#define RXSTBC_TWO 2 /* rx support of 1 and 2 spatial stream */
+#define RXSTBC_THR 3 /* rx support of 1~3 spatial stream */
+/* MCS FEEDBACK */
+#define MCSFBK_NONE 0 /* not support mcs feedback / */
+#define MCSFBK_RSV 1 /* reserved */
+#define MCSFBK_UNSOLICIT 2 /* only support unsolict mcs feedback */
+#define MCSFBK_MRQ 3 /* response to both MRQ and unsolict mcs feedback */
+
+/* MIMO power safe */
#define MMPS_STATIC 0
#define MMPS_DYNAMIC 1
#define MMPS_RSV 2
#define MMPS_ENABLE 3
-// A-MSDU size
+/* A-MSDU size */
#define AMSDU_0 0
#define AMSDU_1 1
-// MCS use 7 bits
+/* MCS use 7 bits */
#define TXRATEMIMO 0x80
#define TXRATEMCS 0x7F
#define TXRATEOFDM 0x7F
@@ -1074,77 +1074,77 @@
#define RATE_2 1
#define RATE_5_5 2
#define RATE_11 3
-#define RATE_6 4 // OFDM
-#define RATE_9 5 // OFDM
-#define RATE_12 6 // OFDM
-#define RATE_18 7 // OFDM
-#define RATE_24 8 // OFDM
-#define RATE_36 9 // OFDM
-#define RATE_48 10 // OFDM
-#define RATE_54 11 // OFDM
+#define RATE_6 4 /* OFDM */
+#define RATE_9 5 /* OFDM */
+#define RATE_12 6 /* OFDM */
+#define RATE_18 7 /* OFDM */
+#define RATE_24 8 /* OFDM */
+#define RATE_36 9 /* OFDM */
+#define RATE_48 10 /* OFDM */
+#define RATE_54 11 /* OFDM */
#define RATE_FIRST_OFDM_RATE RATE_6
#define RATE_LAST_OFDM_RATE RATE_54
-#define RATE_6_5 12 // HT mix
-#define RATE_13 13 // HT mix
-#define RATE_19_5 14 // HT mix
-#define RATE_26 15 // HT mix
-#define RATE_39 16 // HT mix
-#define RATE_52 17 // HT mix
-#define RATE_58_5 18 // HT mix
-#define RATE_65 19 // HT mix
-#define RATE_78 20 // HT mix
-#define RATE_104 21 // HT mix
-#define RATE_117 22 // HT mix
-#define RATE_130 23 // HT mix
-//#define RATE_AUTO_SWITCH 255 // for StaCfg.FixedTxRate only
+#define RATE_6_5 12 /* HT mix */
+#define RATE_13 13 /* HT mix */
+#define RATE_19_5 14 /* HT mix */
+#define RATE_26 15 /* HT mix */
+#define RATE_39 16 /* HT mix */
+#define RATE_52 17 /* HT mix */
+#define RATE_58_5 18 /* HT mix */
+#define RATE_65 19 /* HT mix */
+#define RATE_78 20 /* HT mix */
+#define RATE_104 21 /* HT mix */
+#define RATE_117 22 /* HT mix */
+#define RATE_130 23 /* HT mix */
+/*#define RATE_AUTO_SWITCH 255 // for StaCfg.FixedTxRate only */
#define HTRATE_0 12
#define RATE_FIRST_MM_RATE HTRATE_0
#define RATE_FIRST_HT_RATE HTRATE_0
#define RATE_LAST_HT_RATE HTRATE_0
-// pTxWI->txop
-#define IFS_HTTXOP 0 // The txop will be handles by ASIC.
+/* pTxWI->txop */
+#define IFS_HTTXOP 0 /* The txop will be handles by ASIC. */
#define IFS_PIFS 1
#define IFS_SIFS 2
#define IFS_BACKOFF 3
-// pTxD->RetryMode
+/* pTxD->RetryMode */
#define LONG_RETRY 1
#define SHORT_RETRY 0
-// Country Region definition
+/* Country Region definition */
#define REGION_MINIMUM_BG_BAND 0
-#define REGION_0_BG_BAND 0 // 1-11
-#define REGION_1_BG_BAND 1 // 1-13
-#define REGION_2_BG_BAND 2 // 10-11
-#define REGION_3_BG_BAND 3 // 10-13
-#define REGION_4_BG_BAND 4 // 14
-#define REGION_5_BG_BAND 5 // 1-14
-#define REGION_6_BG_BAND 6 // 3-9
-#define REGION_7_BG_BAND 7 // 5-13
-#define REGION_31_BG_BAND 31 // 5-13
+#define REGION_0_BG_BAND 0 /* 1-11 */
+#define REGION_1_BG_BAND 1 /* 1-13 */
+#define REGION_2_BG_BAND 2 /* 10-11 */
+#define REGION_3_BG_BAND 3 /* 10-13 */
+#define REGION_4_BG_BAND 4 /* 14 */
+#define REGION_5_BG_BAND 5 /* 1-14 */
+#define REGION_6_BG_BAND 6 /* 3-9 */
+#define REGION_7_BG_BAND 7 /* 5-13 */
+#define REGION_31_BG_BAND 31 /* 5-13 */
#define REGION_MAXIMUM_BG_BAND 7
#define REGION_MINIMUM_A_BAND 0
-#define REGION_0_A_BAND 0 // 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165
-#define REGION_1_A_BAND 1 // 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140
-#define REGION_2_A_BAND 2 // 36, 40, 44, 48, 52, 56, 60, 64
-#define REGION_3_A_BAND 3 // 52, 56, 60, 64, 149, 153, 157, 161
-#define REGION_4_A_BAND 4 // 149, 153, 157, 161, 165
-#define REGION_5_A_BAND 5 // 149, 153, 157, 161
-#define REGION_6_A_BAND 6 // 36, 40, 44, 48
-#define REGION_7_A_BAND 7 // 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165, 169, 173
-#define REGION_8_A_BAND 8 // 52, 56, 60, 64
-#define REGION_9_A_BAND 9 // 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 132, 136, 140, 149, 153, 157, 161, 165
-#define REGION_10_A_BAND 10 // 36, 40, 44, 48, 149, 153, 157, 161, 165
-#define REGION_11_A_BAND 11 // 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 149, 153, 157, 161
-#define REGION_12_A_BAND 12 // 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140
-#define REGION_13_A_BAND 13 // 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161
-#define REGION_14_A_BAND 14 // 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 136, 140, 149, 153, 157, 161, 165
-#define REGION_15_A_BAND 15 // 149, 153, 157, 161, 165, 169, 173
+#define REGION_0_A_BAND 0 /* 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165 */
+#define REGION_1_A_BAND 1 /* 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 */
+#define REGION_2_A_BAND 2 /* 36, 40, 44, 48, 52, 56, 60, 64 */
+#define REGION_3_A_BAND 3 /* 52, 56, 60, 64, 149, 153, 157, 161 */
+#define REGION_4_A_BAND 4 /* 149, 153, 157, 161, 165 */
+#define REGION_5_A_BAND 5 /* 149, 153, 157, 161 */
+#define REGION_6_A_BAND 6 /* 36, 40, 44, 48 */
+#define REGION_7_A_BAND 7 /* 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165, 169, 173 */
+#define REGION_8_A_BAND 8 /* 52, 56, 60, 64 */
+#define REGION_9_A_BAND 9 /* 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 132, 136, 140, 149, 153, 157, 161, 165 */
+#define REGION_10_A_BAND 10 /* 36, 40, 44, 48, 149, 153, 157, 161, 165 */
+#define REGION_11_A_BAND 11 /* 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 149, 153, 157, 161 */
+#define REGION_12_A_BAND 12 /* 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 */
+#define REGION_13_A_BAND 13 /* 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161 */
+#define REGION_14_A_BAND 14 /* 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 136, 140, 149, 153, 157, 161, 165 */
+#define REGION_15_A_BAND 15 /* 149, 153, 157, 161, 165, 169, 173 */
#define REGION_MAXIMUM_A_BAND 15
-// pTxD->CipherAlg
+/* pTxD->CipherAlg */
#define CIPHER_NONE 0
#define CIPHER_WEP64 1
#define CIPHER_WEP128 2
@@ -1152,10 +1152,10 @@
#define CIPHER_AES 4
#define CIPHER_CKIP64 5
#define CIPHER_CKIP128 6
-#define CIPHER_TKIP_NO_MIC 7 // MIC appended by driver: not a valid value in hardware key table
+#define CIPHER_TKIP_NO_MIC 7 /* MIC appended by driver: not a valid value in hardware key table */
#define CIPHER_SMS4 8
-// LED Status.
+/* LED Status. */
#define LED_LINK_DOWN 0
#define LED_LINK_UP 1
#define LED_RADIO_OFF 2
@@ -1165,35 +1165,35 @@
#define LED_ON_SITE_SURVEY 6
#define LED_POWER_UP 7
-// value domain of pAd->LedCntl.LedMode and E2PROM
+/* value domain of pAd->LedCntl.LedMode and E2PROM */
#define LED_MODE_DEFAULT 0
#define LED_MODE_TWO_LED 1
-//#define LED_MODE_SIGNAL_STREGTH 8 // EEPROM define =8
-#define LED_MODE_SIGNAL_STREGTH 0x40 // EEPROM define = 64
+/*#define LED_MODE_SIGNAL_STREGTH 8 // EEPROM define =8 */
+#define LED_MODE_SIGNAL_STREGTH 0x40 /* EEPROM define = 64 */
-// RC4 init value, used fro WEP & TKIP
+/* RC4 init value, used fro WEP & TKIP */
#define PPPINITFCS32 0xffffffff /* Initial FCS value */
-// value domain of pAd->StaCfg.PortSecured. 802.1X controlled port definition
+/* value domain of pAd->StaCfg.PortSecured. 802.1X controlled port definition */
#define WPA_802_1X_PORT_SECURED 1
#define WPA_802_1X_PORT_NOT_SECURED 2
#define PAIRWISE_KEY 1
#define GROUP_KEY 2
-//definition of DRS
+/*definition of DRS */
#define MAX_STEP_OF_TX_RATE_SWITCH 32
-// pre-allocated free NDIS PACKET/BUFFER poll for internal usage
+/* pre-allocated free NDIS PACKET/BUFFER poll for internal usage */
#define MAX_NUM_OF_FREE_NDIS_PACKET 128
-//Block ACK
+/*Block ACK */
#define MAX_TX_REORDERBUF 64
#define MAX_RX_REORDERBUF 64
#define DEFAULT_TX_TIMEOUT 30
#define DEFAULT_RX_TIMEOUT 30
-// definition of Recipient or Originator
+/* definition of Recipient or Originator */
#define I_RECIPIENT TRUE
#define I_ORIGINATOR FALSE
@@ -1201,43 +1201,43 @@
#define DEFAULT_RF_TX_POWER 5
#define MAX_INI_BUFFER_SIZE 4096
-#define MAX_PARAM_BUFFER_SIZE (2048) // enough for ACL (18*64)
- //18 : the length of Mac address acceptable format "01:02:03:04:05:06;")
- //64 : MAX_NUM_OF_ACL_LIST
-// definition of pAd->OpMode
+#define MAX_PARAM_BUFFER_SIZE (2048) /* enough for ACL (18*64) */
+ /*18 : the length of Mac address acceptable format "01:02:03:04:05:06;") */
+ /*64 : MAX_NUM_OF_ACL_LIST */
+/* definition of pAd->OpMode */
#define OPMODE_STA 0
#define OPMODE_AP 1
-//#define OPMODE_L3_BRG 2 // as AP and STA at the same time
-
-// ========================= AP rtmp_def.h ===========================
-// value domain for pAd->EventTab.Log[].Event
-#define EVENT_RESET_ACCESS_POINT 0 // Log = "hh:mm:ss Restart Access Point"
-#define EVENT_ASSOCIATED 1 // Log = "hh:mm:ss STA 00:01:02:03:04:05 associated"
-#define EVENT_DISASSOCIATED 2 // Log = "hh:mm:ss STA 00:01:02:03:04:05 left this BSS"
-#define EVENT_AGED_OUT 3 // Log = "hh:mm:ss STA 00:01:02:03:04:05 was aged-out and removed from this BSS"
+/*#define OPMODE_L3_BRG 2 // as AP and STA at the same time */
+
+/* ========================= AP rtmp_def.h =========================== */
+/* value domain for pAd->EventTab.Log[].Event */
+#define EVENT_RESET_ACCESS_POINT 0 /* Log = "hh:mm:ss Restart Access Point" */
+#define EVENT_ASSOCIATED 1 /* Log = "hh:mm:ss STA 00:01:02:03:04:05 associated" */
+#define EVENT_DISASSOCIATED 2 /* Log = "hh:mm:ss STA 00:01:02:03:04:05 left this BSS" */
+#define EVENT_AGED_OUT 3 /* Log = "hh:mm:ss STA 00:01:02:03:04:05 was aged-out and removed from this BSS" */
#define EVENT_COUNTER_M 4
#define EVENT_INVALID_PSK 5
#define EVENT_MAX_EVENT_TYPE 6
-// ==== end of AP rtmp_def.h ============
+/* ==== end of AP rtmp_def.h ============ */
-// definition RSSI Number
+/* definition RSSI Number */
#define RSSI_0 0
#define RSSI_1 1
#define RSSI_2 2
-// definition of radar detection
-#define RD_NORMAL_MODE 0 // Not found radar signal
-#define RD_SWITCHING_MODE 1 // Found radar signal, and doing channel switch
-#define RD_SILENCE_MODE 2 // After channel switch, need to be silence a while to ensure radar not found
+/* definition of radar detection */
+#define RD_NORMAL_MODE 0 /* Not found radar signal */
+#define RD_SWITCHING_MODE 1 /* Found radar signal, and doing channel switch */
+#define RD_SILENCE_MODE 2 /* After channel switch, need to be silence a while to ensure radar not found */
-//Driver defined cid for mapping status and command.
+/*Driver defined cid for mapping status and command. */
#define SLEEPCID 0x11
#define WAKECID 0x22
#define QUERYPOWERCID 0x33
#define OWNERMCU 0x1
#define OWNERCPU 0x0
-// MBSSID definition
+/* MBSSID definition */
#define ENTRY_NOT_FOUND 0xFF
/* After Linux 2.6.9,
@@ -1259,15 +1259,15 @@
#define INF_APCLI_DEV_NAME "apcli"
#define INF_MESH_DEV_NAME "mesh"
-// WEP Key TYPE
+/* WEP Key TYPE */
#define WEP_HEXADECIMAL_TYPE 0
#define WEP_ASCII_TYPE 1
-// WIRELESS EVENTS definition
+/* WIRELESS EVENTS definition */
/* Max number of char in custom event, refer to wireless_tools.28/wireless.20.h */
#define IW_CUSTOM_MAX_LEN 255 /* In bytes */
-// For system event - start
+/* For system event - start */
#define IW_SYS_EVENT_FLAG_START 0x0200
#define IW_ASSOC_EVENT_FLAG 0x0200
#define IW_DISASSOC_EVENT_FLAG 0x0201
@@ -1288,12 +1288,12 @@
#define IW_STA_LINKDOWN_EVENT_FLAG 0x0210
#define IW_SCAN_COMPLETED_EVENT_FLAG 0x0211
#define IW_SCAN_ENQUEUE_FAIL_EVENT_FLAG 0x0212
-// if add new system event flag, please upadte the IW_SYS_EVENT_FLAG_END
+/* if add new system event flag, please upadte the IW_SYS_EVENT_FLAG_END */
#define IW_SYS_EVENT_FLAG_END 0x0212
#define IW_SYS_EVENT_TYPE_NUM (IW_SYS_EVENT_FLAG_END - IW_SYS_EVENT_FLAG_START + 1)
-// For system event - end
+/* For system event - end */
-// For spoof attack event - start
+/* For spoof attack event - start */
#define IW_SPOOF_EVENT_FLAG_START 0x0300
#define IW_CONFLICT_SSID_EVENT_FLAG 0x0300
#define IW_SPOOF_ASSOC_RESP_EVENT_FLAG 0x0301
@@ -1305,12 +1305,12 @@
#define IW_SPOOF_DEAUTH_EVENT_FLAG 0x0307
#define IW_SPOOF_UNKNOWN_MGMT_EVENT_FLAG 0x0308
#define IW_REPLAY_ATTACK_EVENT_FLAG 0x0309
-// if add new spoof attack event flag, please upadte the IW_SPOOF_EVENT_FLAG_END
+/* if add new spoof attack event flag, please upadte the IW_SPOOF_EVENT_FLAG_END */
#define IW_SPOOF_EVENT_FLAG_END 0x0309
#define IW_SPOOF_EVENT_TYPE_NUM (IW_SPOOF_EVENT_FLAG_END - IW_SPOOF_EVENT_FLAG_START + 1)
-// For spoof attack event - end
+/* For spoof attack event - end */
-// For flooding attack event - start
+/* For flooding attack event - start */
#define IW_FLOOD_EVENT_FLAG_START 0x0400
#define IW_FLOOD_AUTH_EVENT_FLAG 0x0400
#define IW_FLOOD_ASSOC_REQ_EVENT_FLAG 0x0401
@@ -1319,18 +1319,18 @@
#define IW_FLOOD_DISASSOC_EVENT_FLAG 0x0404
#define IW_FLOOD_DEAUTH_EVENT_FLAG 0x0405
#define IW_FLOOD_EAP_REQ_EVENT_FLAG 0x0406
-// if add new flooding attack event flag, please upadte the IW_FLOOD_EVENT_FLAG_END
+/* if add new flooding attack event flag, please upadte the IW_FLOOD_EVENT_FLAG_END */
#define IW_FLOOD_EVENT_FLAG_END 0x0406
#define IW_FLOOD_EVENT_TYPE_NUM (IW_FLOOD_EVENT_FLAG_END - IW_FLOOD_EVENT_FLAG_START + 1)
-// For flooding attack - end
+/* For flooding attack - end */
-// End - WIRELESS EVENTS definition
+/* End - WIRELESS EVENTS definition */
-// definition for DLS, kathy
+/* definition for DLS, kathy */
#define MAX_NUM_OF_INIT_DLS_ENTRY 1
#define MAX_NUM_OF_DLS_ENTRY MAX_NUMBER_OF_DLS_ENTRY
-//Block ACK, kathy
+/*Block ACK, kathy */
#define MAX_TX_REORDERBUF 64
#define MAX_RX_REORDERBUF 64
#define DEFAULT_TX_TIMEOUT 30
@@ -1342,19 +1342,19 @@
#define IW_ESSID_MAX_SIZE 32
#endif
-// For AsicRadioOff/AsicRadioOn function
+/* For AsicRadioOff/AsicRadioOn function */
#define DOT11POWERSAVE 0
#define GUIRADIO_OFF 1
#define RTMP_HALT 2
#define GUI_IDLE_POWER_SAVE 3
-// --
+/* -- */
-// definition for WpaSupport flag
+/* definition for WpaSupport flag */
#define WPA_SUPPLICANT_DISABLE 0
#define WPA_SUPPLICANT_ENABLE 1
#define WPA_SUPPLICANT_ENABLE_WITH_WEB_UI 2
-// Endian byte swapping codes
+/* Endian byte swapping codes */
#define SWAP16(x) \
((UINT16)( \
(((UINT16)(x) & (UINT16) 0x00ffU) << 8) | \
@@ -1423,4 +1423,4 @@ do{ \
} \
}while(0)
-#endif // __RTMP_DEF_H__
+#endif /* __RTMP_DEF_H__ */
diff --git a/drivers/staging/rt2860/rtmp_dot11.h b/drivers/staging/rt2860/rtmp_dot11.h
index 051840f..fd9c720 100644
--- a/drivers/staging/rt2860/rtmp_dot11.h
+++ b/drivers/staging/rt2860/rtmp_dot11.h
@@ -30,46 +30,46 @@
#include "rtmp_type.h"
-// 4-byte HTC field. maybe included in any frame except non-QOS data frame. The Order bit must set 1.
+/* 4-byte HTC field. maybe included in any frame except non-QOS data frame. The Order bit must set 1. */
typedef struct PACKED {
- UINT32 MA:1; //management action payload exist in (QoS Null+HTC)
- UINT32 TRQ:1; //sounding request
- UINT32 MRQ:1; //MCS feedback. Request for a MCS feedback
- UINT32 MRSorASI:3; // MRQ Sequence identifier. unchanged during entire procedure. 0x000-0x110.
- UINT32 MFS:3; //SET to the received value of MRS. 0x111 for unsolicited MFB.
- UINT32 MFBorASC:7; //Link adaptation feedback containing recommended MCS. 0x7f for no feedback or not available
- UINT32 CalPos:2; // calibration position
- UINT32 CalSeq:2; //calibration sequence
- UINT32 FBKReq:2; //feedback request
- UINT32 CSISTEERING:2; //CSI/ STEERING
- UINT32 ZLFAnnouce:1; // ZLF announcement
- UINT32 rsv:5; //calibration sequence
- UINT32 ACConstraint:1; //feedback request
- UINT32 RDG:1; //RDG / More PPDU
+ UINT32 MA:1; /*management action payload exist in (QoS Null+HTC) */
+ UINT32 TRQ:1; /*sounding request */
+ UINT32 MRQ:1; /*MCS feedback. Request for a MCS feedback */
+ UINT32 MRSorASI:3; /* MRQ Sequence identifier. unchanged during entire procedure. 0x000-0x110. */
+ UINT32 MFS:3; /*SET to the received value of MRS. 0x111 for unsolicited MFB. */
+ UINT32 MFBorASC:7; /*Link adaptation feedback containing recommended MCS. 0x7f for no feedback or not available */
+ UINT32 CalPos:2; /* calibration position */
+ UINT32 CalSeq:2; /*calibration sequence */
+ UINT32 FBKReq:2; /*feedback request */
+ UINT32 CSISTEERING:2; /*CSI/ STEERING */
+ UINT32 ZLFAnnouce:1; /* ZLF announcement */
+ UINT32 rsv:5; /*calibration sequence */
+ UINT32 ACConstraint:1; /*feedback request */
+ UINT32 RDG:1; /*RDG / More PPDU */
} HT_CONTROL, *PHT_CONTROL;
-// 2-byte QOS CONTROL field
+/* 2-byte QOS CONTROL field */
typedef struct PACKED {
USHORT TID:4;
USHORT EOSP:1;
- USHORT AckPolicy:2; //0: normal ACK 1:No ACK 2:scheduled under MTBA/PSMP 3: BA
+ USHORT AckPolicy:2; /*0: normal ACK 1:No ACK 2:scheduled under MTBA/PSMP 3: BA */
USHORT AMsduPresent:1;
USHORT Txop_QueueSize:8;
} QOS_CONTROL, *PQOS_CONTROL;
-// 2-byte Frame control field
+/* 2-byte Frame control field */
typedef struct PACKED {
- USHORT Ver:2; // Protocol version
- USHORT Type:2; // MSDU type
- USHORT SubType:4; // MSDU subtype
- USHORT ToDs:1; // To DS indication
- USHORT FrDs:1; // From DS indication
- USHORT MoreFrag:1; // More fragment bit
- USHORT Retry:1; // Retry status bit
- USHORT PwrMgmt:1; // Power management bit
- USHORT MoreData:1; // More data bit
- USHORT Wep:1; // Wep data
- USHORT Order:1; // Strict order expected
+ USHORT Ver:2; /* Protocol version */
+ USHORT Type:2; /* MSDU type */
+ USHORT SubType:4; /* MSDU subtype */
+ USHORT ToDs:1; /* To DS indication */
+ USHORT FrDs:1; /* From DS indication */
+ USHORT MoreFrag:1; /* More fragment bit */
+ USHORT Retry:1; /* Retry status bit */
+ USHORT PwrMgmt:1; /* Power management bit */
+ USHORT MoreData:1; /* More data bit */
+ USHORT Wep:1; /* Wep data */
+ USHORT Order:1; /* Strict order expected */
} FRAME_CONTROL, *PFRAME_CONTROL;
typedef struct PACKED _HEADER_802_11 {
@@ -97,4 +97,4 @@ typedef struct PACKED _RTS_FRAME {
UCHAR Addr2[MAC_ADDR_LEN];
} RTS_FRAME, *PRTS_FRAME;
-#endif // __DOT11_BASE_H__ //
+#endif /* __DOT11_BASE_H__ // */
diff --git a/drivers/staging/rt2860/rtmp_iface.h b/drivers/staging/rt2860/rtmp_iface.h
index eee17d4..84b08a0 100644
--- a/drivers/staging/rt2860/rtmp_iface.h
+++ b/drivers/staging/rt2860/rtmp_iface.h
@@ -39,19 +39,19 @@
#ifdef RTMP_PCI_SUPPORT
#include "iface/rtmp_pci.h"
-#endif // RTMP_PCI_SUPPORT //
+#endif /* RTMP_PCI_SUPPORT // */
#ifdef RTMP_USB_SUPPORT
#include "iface/rtmp_usb.h"
-#endif // RTMP_USB_SUPPORT //
+#endif /* RTMP_USB_SUPPORT // */
typedef struct _INF_PCI_CONFIG_ {
- unsigned long CSRBaseAddress; // PCI MMIO Base Address, all access will use
+ unsigned long CSRBaseAddress; /* PCI MMIO Base Address, all access will use */
unsigned int irq_num;
} INF_PCI_CONFIG;
typedef struct _INF_USB_CONFIG_ {
- UINT8 BulkInEpAddr; // bulk-in endpoint address
- UINT8 BulkOutEpAddr[6]; // bulk-out endpoint address
+ UINT8 BulkInEpAddr; /* bulk-in endpoint address */
+ UINT8 BulkOutEpAddr[6]; /* bulk-out endpoint address */
} INF_USB_CONFIG;
typedef struct _INF_RBUS_CONFIG_ {
@@ -72,4 +72,4 @@ typedef union _RTMP_INF_CONFIG_ {
struct _INF_RBUS_CONFIG_ rbusConfig;
} RTMP_INF_CONFIG;
-#endif // __RTMP_IFACE_H__ //
+#endif /* __RTMP_IFACE_H__ // */
diff --git a/drivers/staging/rt2860/rtmp_mcu.h b/drivers/staging/rt2860/rtmp_mcu.h
index 98dea1b..1c31700 100644
--- a/drivers/staging/rt2860/rtmp_mcu.h
+++ b/drivers/staging/rt2860/rtmp_mcu.h
@@ -46,4 +46,4 @@ INT RtmpAsicSendCommandToMcu(IN PRTMP_ADAPTER pAd,
IN UCHAR Command,
IN UCHAR Token, IN UCHAR Arg0, IN UCHAR Arg1);
-#endif // __RTMP_MCU_H__ //
+#endif /* __RTMP_MCU_H__ // */
diff --git a/drivers/staging/rt2860/rtmp_os.h b/drivers/staging/rt2860/rtmp_os.h
index 82b60fc..eb79e6f 100644
--- a/drivers/staging/rt2860/rtmp_os.h
+++ b/drivers/staging/rt2860/rtmp_os.h
@@ -39,7 +39,7 @@
#ifdef LINUX
#include "rt_linux.h"
-#endif // LINUX //
+#endif /* LINUX // */
/*
This data structure mainly strip some callback function defined in
@@ -69,7 +69,7 @@ typedef enum _RTMP_TASK_STATUS_ {
typedef struct _RTMP_OS_TASK_ {
char taskName[RTMP_OS_TASK_NAME_LEN];
void *priv;
- //unsigned long taskFlags;
+ /*unsigned long taskFlags; */
RTMP_TASK_STATUS taskStatus;
#ifndef KTHREAD_SUPPORT
RTMP_OS_SEM taskSema;
@@ -87,4 +87,4 @@ typedef struct _RTMP_OS_TASK_ {
int RtmpOSIRQRequest(IN PNET_DEV pNetDev);
int RtmpOSIRQRelease(IN PNET_DEV pNetDev);
-#endif // __RMTP_OS_H__ //
+#endif /* __RMTP_OS_H__ // */
diff --git a/drivers/staging/rt2860/rtmp_timer.h b/drivers/staging/rt2860/rtmp_timer.h
index 9f77197..e136576 100644
--- a/drivers/staging/rt2860/rtmp_timer.h
+++ b/drivers/staging/rt2860/rtmp_timer.h
@@ -50,29 +50,29 @@
rtmp_timer_##_func
/* ----------------- Timer Related MARCO ---------------*/
-// In some os or chipset, we have a lot of timer functions and will read/write register,
-// it's not allowed in Linux USB sub-system to do it ( because of sleep issue when
-// submit to ctrl pipe). So we need a wrapper function to take care it.
+/* In some os or chipset, we have a lot of timer functions and will read/write register, */
+/* it's not allowed in Linux USB sub-system to do it ( because of sleep issue when */
+/* submit to ctrl pipe). So we need a wrapper function to take care it. */
#ifdef RTMP_TIMER_TASK_SUPPORT
typedef VOID(*RTMP_TIMER_TASK_HANDLE) (IN PVOID SystemSpecific1,
IN PVOID FunctionContext,
IN PVOID SystemSpecific2,
IN PVOID SystemSpecific3);
-#endif // RTMP_TIMER_TASK_SUPPORT //
+#endif /* RTMP_TIMER_TASK_SUPPORT // */
typedef struct _RALINK_TIMER_STRUCT {
- RTMP_OS_TIMER TimerObj; // Ndis Timer object
- BOOLEAN Valid; // Set to True when call RTMPInitTimer
- BOOLEAN State; // True if timer cancelled
- BOOLEAN PeriodicType; // True if timer is periodic timer
- BOOLEAN Repeat; // True if periodic timer
- ULONG TimerValue; // Timer value in milliseconds
- ULONG cookie; // os specific object
+ RTMP_OS_TIMER TimerObj; /* Ndis Timer object */
+ BOOLEAN Valid; /* Set to True when call RTMPInitTimer */
+ BOOLEAN State; /* True if timer cancelled */
+ BOOLEAN PeriodicType; /* True if timer is periodic timer */
+ BOOLEAN Repeat; /* True if periodic timer */
+ ULONG TimerValue; /* Timer value in milliseconds */
+ ULONG cookie; /* os specific object */
#ifdef RTMP_TIMER_TASK_SUPPORT
RTMP_TIMER_TASK_HANDLE handle;
void *pAd;
-#endif // RTMP_TIMER_TASK_SUPPORT //
+#endif /* RTMP_TIMER_TASK_SUPPORT // */
} RALINK_TIMER_STRUCT, *PRALINK_TIMER_STRUCT;
#ifdef RTMP_TIMER_TASK_SUPPORT
@@ -113,7 +113,7 @@ void rtmp_timer_##_func(unsigned long data) \
if (pTimer->Repeat) \
RTMP_OS_Add_Timer(&pTimer->TimerObj, pTimer->TimerValue); \
}
-#endif // RTMP_TIMER_TASK_SUPPORT //
+#endif /* RTMP_TIMER_TASK_SUPPORT // */
DECLARE_TIMER_FUNCTION(MlmePeriodicExec);
DECLARE_TIMER_FUNCTION(MlmeRssiReportExec);
@@ -122,7 +122,7 @@ DECLARE_TIMER_FUNCTION(APSDPeriodicExec);
DECLARE_TIMER_FUNCTION(AsicRfTuningExec);
#ifdef RTMP_MAC_USB
DECLARE_TIMER_FUNCTION(BeaconUpdateExec);
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
DECLARE_TIMER_FUNCTION(BeaconTimeout);
DECLARE_TIMER_FUNCTION(ScanTimeout);
@@ -138,10 +138,10 @@ DECLARE_TIMER_FUNCTION(RadioOnExec);
#ifdef RTMP_MAC_USB
DECLARE_TIMER_FUNCTION(RtmpUsbStaAsicForceWakeupTimeout);
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
#if defined(AP_LED) || defined(STA_LED)
DECLARE_TIMER_FUNCTION(LedCtrlMain);
#endif
-#endif // __RTMP_TIMER_H__ //
+#endif /* __RTMP_TIMER_H__ // */
diff --git a/drivers/staging/rt2860/rtmp_type.h b/drivers/staging/rt2860/rtmp_type.h
index 4900f9f..11e3591 100644
--- a/drivers/staging/rt2860/rtmp_type.h
+++ b/drivers/staging/rt2860/rtmp_type.h
@@ -41,15 +41,15 @@
#define PACKED __attribute__ ((packed))
#ifdef LINUX
-// Put platform dependent declaration here
-// For example, linux type definition
+/* Put platform dependent declaration here */
+/* For example, linux type definition */
typedef unsigned char UINT8;
typedef unsigned short UINT16;
typedef unsigned int UINT32;
typedef unsigned long long UINT64;
typedef int INT32;
typedef long long INT64;
-#endif // LINUX //
+#endif /* LINUX // */
typedef unsigned char *PUINT8;
typedef unsigned short *PUINT16;
@@ -58,7 +58,7 @@ typedef unsigned long long *PUINT64;
typedef int *PINT32;
typedef long long *PINT64;
-// modified for fixing compile warning on Sigma 8634 platform
+/* modified for fixing compile warning on Sigma 8634 platform */
typedef char STRING;
typedef signed char CHAR;
@@ -72,13 +72,13 @@ typedef unsigned char UCHAR;
typedef unsigned short USHORT;
typedef unsigned int UINT;
typedef unsigned long ULONG;
-#endif // LINUX //
+#endif /* LINUX // */
typedef unsigned long long ULONGLONG;
typedef unsigned char BOOLEAN;
#ifdef LINUX
typedef void VOID;
-#endif // LINUX //
+#endif /* LINUX // */
typedef char *PSTRING;
typedef VOID *PVOID;
@@ -99,9 +99,9 @@ typedef union _LARGE_INTEGER {
INT64 QuadPart;
} LARGE_INTEGER;
-//
-// Register set pair for initialzation register set definition
-//
+/* */
+/* Register set pair for initialzation register set definition */
+/* */
typedef struct _RTMP_REG_PAIR {
ULONG Register;
ULONG Value;
@@ -112,9 +112,9 @@ typedef struct _REG_PAIR {
UCHAR Value;
} REG_PAIR, *PREG_PAIR;
-//
-// Register set pair for initialzation register set definition
-//
+/* */
+/* Register set pair for initialzation register set definition */
+/* */
typedef struct _RTMP_RF_REGS {
UCHAR Channel;
ULONG R1;
@@ -135,4 +135,4 @@ typedef int NTSTATUS;
#define STATUS_SUCCESS 0x00
#define STATUS_UNSUCCESSFUL 0x01
-#endif // __RTMP_TYPE_H__ //
+#endif /* __RTMP_TYPE_H__ // */
diff --git a/drivers/staging/rt2860/rtusb_io.h b/drivers/staging/rt2860/rtusb_io.h
index 6217dd2..ec1ffba 100644
--- a/drivers/staging/rt2860/rtusb_io.h
+++ b/drivers/staging/rt2860/rtusb_io.h
@@ -30,54 +30,54 @@
#include "rtmp_type.h"
-// New for MeetingHouse Api support
-#define CMDTHREAD_VENDOR_RESET 0x0D730101 // cmd
-#define CMDTHREAD_VENDOR_UNPLUG 0x0D730102 // cmd
-#define CMDTHREAD_VENDOR_SWITCH_FUNCTION 0x0D730103 // cmd
-#define CMDTHREAD_MULTI_WRITE_MAC 0x0D730107 // cmd
-#define CMDTHREAD_MULTI_READ_MAC 0x0D730108 // cmd
-#define CMDTHREAD_VENDOR_EEPROM_WRITE 0x0D73010A // cmd
-#define CMDTHREAD_VENDOR_EEPROM_READ 0x0D73010B // cmd
-#define CMDTHREAD_VENDOR_ENTER_TESTMODE 0x0D73010C // cmd
-#define CMDTHREAD_VENDOR_EXIT_TESTMODE 0x0D73010D // cmd
-#define CMDTHREAD_VENDOR_WRITE_BBP 0x0D730119 // cmd
-#define CMDTHREAD_VENDOR_READ_BBP 0x0D730118 // cmd
-#define CMDTHREAD_VENDOR_WRITE_RF 0x0D73011A // cmd
-#define CMDTHREAD_VENDOR_FLIP_IQ 0x0D73011D // cmd
-#define CMDTHREAD_RESET_BULK_OUT 0x0D730210 // cmd
-#define CMDTHREAD_RESET_BULK_IN 0x0D730211 // cmd
-#define CMDTHREAD_SET_PSM_BIT 0x0D730212 // cmd
-#define CMDTHREAD_SET_RADIO 0x0D730214 // cmd
-#define CMDTHREAD_UPDATE_TX_RATE 0x0D730216 // cmd
-#define CMDTHREAD_802_11_ADD_KEY_WEP 0x0D730218 // cmd
-#define CMDTHREAD_RESET_FROM_ERROR 0x0D73021A // cmd
-#define CMDTHREAD_LINK_DOWN 0x0D73021B // cmd
-#define CMDTHREAD_RESET_FROM_NDIS 0x0D73021C // cmd
-#define CMDTHREAD_CHECK_GPIO 0x0D730215 // cmd
-#define CMDTHREAD_FORCE_WAKE_UP 0x0D730222 // cmd
-#define CMDTHREAD_SET_BW 0x0D730225 // cmd
-#define CMDTHREAD_SET_ASIC_WCID 0x0D730226 // cmd
-#define CMDTHREAD_SET_ASIC_WCID_CIPHER 0x0D730227 // cmd
-#define CMDTHREAD_QKERIODIC_EXECUT 0x0D73023D // cmd
-#define RT_CMD_SET_KEY_TABLE 0x0D730228 // cmd
-#define RT_CMD_SET_RX_WCID_TABLE 0x0D730229 // cmd
-#define CMDTHREAD_SET_CLIENT_MAC_ENTRY 0x0D73023E // cmd
-#define CMDTHREAD_SET_GROUP_KEY 0x0D73023F // cmd
-#define CMDTHREAD_SET_PAIRWISE_KEY 0x0D730240 // cmd
-
-#define CMDTHREAD_802_11_QUERY_HARDWARE_REGISTER 0x0D710105 // cmd
-#define CMDTHREAD_802_11_SET_PHY_MODE 0x0D79010C // cmd
-#define CMDTHREAD_802_11_SET_STA_CONFIG 0x0D790111 // cmd
-#define CMDTHREAD_802_11_SET_PREAMBLE 0x0D790101 // cmd
-#define CMDTHREAD_802_11_COUNTER_MEASURE 0x0D790102 // cmd
-// add by johnli, fix "in_interrupt" error when call "MacTableDeleteEntry" in Rx tasklet
-#define CMDTHREAD_UPDATE_PROTECT 0x0D790103 // cmd
-// end johnli
-
-//CMDTHREAD_MULTI_READ_MAC
-//CMDTHREAD_MULTI_WRITE_MAC
-//CMDTHREAD_VENDOR_EEPROM_READ
-//CMDTHREAD_VENDOR_EEPROM_WRITE
+/* New for MeetingHouse Api support */
+#define CMDTHREAD_VENDOR_RESET 0x0D730101 /* cmd */
+#define CMDTHREAD_VENDOR_UNPLUG 0x0D730102 /* cmd */
+#define CMDTHREAD_VENDOR_SWITCH_FUNCTION 0x0D730103 /* cmd */
+#define CMDTHREAD_MULTI_WRITE_MAC 0x0D730107 /* cmd */
+#define CMDTHREAD_MULTI_READ_MAC 0x0D730108 /* cmd */
+#define CMDTHREAD_VENDOR_EEPROM_WRITE 0x0D73010A /* cmd */
+#define CMDTHREAD_VENDOR_EEPROM_READ 0x0D73010B /* cmd */
+#define CMDTHREAD_VENDOR_ENTER_TESTMODE 0x0D73010C /* cmd */
+#define CMDTHREAD_VENDOR_EXIT_TESTMODE 0x0D73010D /* cmd */
+#define CMDTHREAD_VENDOR_WRITE_BBP 0x0D730119 /* cmd */
+#define CMDTHREAD_VENDOR_READ_BBP 0x0D730118 /* cmd */
+#define CMDTHREAD_VENDOR_WRITE_RF 0x0D73011A /* cmd */
+#define CMDTHREAD_VENDOR_FLIP_IQ 0x0D73011D /* cmd */
+#define CMDTHREAD_RESET_BULK_OUT 0x0D730210 /* cmd */
+#define CMDTHREAD_RESET_BULK_IN 0x0D730211 /* cmd */
+#define CMDTHREAD_SET_PSM_BIT 0x0D730212 /* cmd */
+#define CMDTHREAD_SET_RADIO 0x0D730214 /* cmd */
+#define CMDTHREAD_UPDATE_TX_RATE 0x0D730216 /* cmd */
+#define CMDTHREAD_802_11_ADD_KEY_WEP 0x0D730218 /* cmd */
+#define CMDTHREAD_RESET_FROM_ERROR 0x0D73021A /* cmd */
+#define CMDTHREAD_LINK_DOWN 0x0D73021B /* cmd */
+#define CMDTHREAD_RESET_FROM_NDIS 0x0D73021C /* cmd */
+#define CMDTHREAD_CHECK_GPIO 0x0D730215 /* cmd */
+#define CMDTHREAD_FORCE_WAKE_UP 0x0D730222 /* cmd */
+#define CMDTHREAD_SET_BW 0x0D730225 /* cmd */
+#define CMDTHREAD_SET_ASIC_WCID 0x0D730226 /* cmd */
+#define CMDTHREAD_SET_ASIC_WCID_CIPHER 0x0D730227 /* cmd */
+#define CMDTHREAD_QKERIODIC_EXECUT 0x0D73023D /* cmd */
+#define RT_CMD_SET_KEY_TABLE 0x0D730228 /* cmd */
+#define RT_CMD_SET_RX_WCID_TABLE 0x0D730229 /* cmd */
+#define CMDTHREAD_SET_CLIENT_MAC_ENTRY 0x0D73023E /* cmd */
+#define CMDTHREAD_SET_GROUP_KEY 0x0D73023F /* cmd */
+#define CMDTHREAD_SET_PAIRWISE_KEY 0x0D730240 /* cmd */
+
+#define CMDTHREAD_802_11_QUERY_HARDWARE_REGISTER 0x0D710105 /* cmd */
+#define CMDTHREAD_802_11_SET_PHY_MODE 0x0D79010C /* cmd */
+#define CMDTHREAD_802_11_SET_STA_CONFIG 0x0D790111 /* cmd */
+#define CMDTHREAD_802_11_SET_PREAMBLE 0x0D790101 /* cmd */
+#define CMDTHREAD_802_11_COUNTER_MEASURE 0x0D790102 /* cmd */
+/* add by johnli, fix "in_interrupt" error when call "MacTableDeleteEntry" in Rx tasklet */
+#define CMDTHREAD_UPDATE_PROTECT 0x0D790103 /* cmd */
+/* end johnli */
+
+/*CMDTHREAD_MULTI_READ_MAC */
+/*CMDTHREAD_MULTI_WRITE_MAC */
+/*CMDTHREAD_VENDOR_EEPROM_READ */
+/*CMDTHREAD_VENDOR_EEPROM_WRITE */
typedef struct _CMDHandler_TLV {
USHORT Offset;
USHORT Length;
@@ -116,7 +116,7 @@ typedef struct _CmdQ {
USB Cmd to ASIC Related MACRO
******************************************************************************/
-// reset MAC of a station entry to 0xFFFFFFFFFFFF
+/* reset MAC of a station entry to 0xFFFFFFFFFFFF */
#define RTMP_STA_ENTRY_MAC_RESET(pAd, Wcid) \
{ RT_SET_ASIC_WCID SetAsicWcid; \
SetAsicWcid.WCID = Wcid; \
@@ -125,22 +125,22 @@ typedef struct _CmdQ {
RTUSBEnqueueInternalCmd(pAd, CMDTHREAD_SET_ASIC_WCID, \
&SetAsicWcid, sizeof(RT_SET_ASIC_WCID)); }
-// add this entry into ASIC RX WCID search table
+/* add this entry into ASIC RX WCID search table */
#define RTMP_STA_ENTRY_ADD(pAd, pEntry) \
RTUSBEnqueueInternalCmd(pAd, CMDTHREAD_SET_CLIENT_MAC_ENTRY, \
pEntry, sizeof(MAC_TABLE_ENTRY));
-// add by johnli, fix "in_interrupt" error when call "MacTableDeleteEntry" in Rx tasklet
-// Set MAC register value according operation mode
+/* add by johnli, fix "in_interrupt" error when call "MacTableDeleteEntry" in Rx tasklet */
+/* Set MAC register value according operation mode */
#define RTMP_UPDATE_PROTECT(pAd) \
RTUSBEnqueueInternalCmd(pAd, CMDTHREAD_UPDATE_PROTECT, NULL, 0);
-// end johnli
+/* end johnli */
-// remove Pair-wise key material from ASIC
-// yet implement
+/* remove Pair-wise key material from ASIC */
+/* yet implement */
#define RTMP_STA_ENTRY_KEY_DEL(pAd, BssIdx, Wcid)
-// add Client security information into ASIC WCID table and IVEIV table
+/* add Client security information into ASIC WCID table and IVEIV table */
#define RTMP_STA_SECURITY_INFO_ADD(pAd, apidx, KeyID, pEntry) \
{ RTMP_STA_ENTRY_MAC_RESET(pAd, pEntry->Aid); \
if (pEntry->Aid >= 1) { \
@@ -160,7 +160,7 @@ typedef struct _CmdQ {
RTUSBEnqueueInternalCmd(pAd, CMDTHREAD_SET_ASIC_WCID_CIPHER, \
&SetAsicWcidAttri, sizeof(RT_SET_ASIC_WCID_ATTRI)); } }
-// Insert the BA bitmap to ASIC for the Wcid entry
+/* Insert the BA bitmap to ASIC for the Wcid entry */
#define RTMP_ADD_BA_SESSION_TO_ASIC(_pAd, _Aid, _TID) \
do{ \
RT_SET_ASIC_WCID SetAsicWcid; \
@@ -170,7 +170,7 @@ typedef struct _CmdQ {
RTUSBEnqueueInternalCmd((_pAd), CMDTHREAD_SET_ASIC_WCID, &SetAsicWcid, sizeof(RT_SET_ASIC_WCID)); \
}while(0)
-// Remove the BA bitmap from ASIC for the Wcid entry
+/* Remove the BA bitmap from ASIC for the Wcid entry */
#define RTMP_DEL_BA_SESSION_FROM_ASIC(_pAd, _Wcid, _TID) \
do{ \
RT_SET_ASIC_WCID SetAsicWcid; \
@@ -180,4 +180,4 @@ typedef struct _CmdQ {
RTUSBEnqueueInternalCmd((_pAd), CMDTHREAD_SET_ASIC_WCID, &SetAsicWcid, sizeof(RT_SET_ASIC_WCID)); \
}while(0)
-#endif // __RTUSB_IO_H__ //
+#endif /* __RTUSB_IO_H__ // */
diff --git a/drivers/staging/rt2860/spectrum.h b/drivers/staging/rt2860/spectrum.h
index 64154e9..b1e3ba0 100644
--- a/drivers/staging/rt2860/spectrum.h
+++ b/drivers/staging/rt2860/spectrum.h
@@ -186,4 +186,4 @@ VOID NotifyChSwAnnToPeerAPs(IN PRTMP_ADAPTER pAd,
VOID RguClass_BuildBcnChList(IN PRTMP_ADAPTER pAd,
OUT PUCHAR pBuf, OUT PULONG pBufLen);
-#endif // __SPECTRUM_H__ //
+#endif /* __SPECTRUM_H__ // */
diff --git a/drivers/staging/rt2860/spectrum_def.h b/drivers/staging/rt2860/spectrum_def.h
index 4ebe5f5..d100c31 100644
--- a/drivers/staging/rt2860/spectrum_def.h
+++ b/drivers/staging/rt2860/spectrum_def.h
@@ -58,7 +58,7 @@ typedef struct _MEASURE_REQ_ENTRY {
ULONG lastTime;
BOOLEAN Valid;
UINT8 DialogToken;
- UINT8 MeasureDialogToken[3]; // 0:basic measure, 1: CCA measure, 2: RPI_Histogram measure.
+ UINT8 MeasureDialogToken[3]; /* 0:basic measure, 1: CCA measure, 2: RPI_Histogram measure. */
} MEASURE_REQ_ENTRY, *PMEASURE_REQ_ENTRY;
typedef struct _MEASURE_REQ_TAB {
@@ -195,4 +195,4 @@ typedef struct PACKED _QUIET_INFO {
UINT16 QuietOffset;
} QUIET_INFO, *PQUIET_INFO;
-#endif // __SPECTRUM_DEF_H__ //
+#endif /* __SPECTRUM_DEF_H__ // */
diff --git a/drivers/staging/rt2860/wpa.h b/drivers/staging/rt2860/wpa.h
index fb5843c..5f998c7 100644
--- a/drivers/staging/rt2860/wpa.h
+++ b/drivers/staging/rt2860/wpa.h
@@ -38,7 +38,7 @@
#ifndef __WPA_H__
#define __WPA_H__
-// EAPOL Key descripter frame format related length
+/* EAPOL Key descripter frame format related length */
#define LEN_KEY_DESC_NONCE 32
#define LEN_KEY_DESC_IV 16
#define LEN_KEY_DESC_RSC 8
@@ -46,25 +46,25 @@
#define LEN_KEY_DESC_REPLAY 8
#define LEN_KEY_DESC_MIC 16
-// The length is the EAPoL-Key frame except key data field.
-// Please refer to 802.11i-2004 ,Figure 43u in p.78
+/* The length is the EAPoL-Key frame except key data field. */
+/* Please refer to 802.11i-2004 ,Figure 43u in p.78 */
#define LEN_EAPOL_KEY_MSG (sizeof(KEY_DESCRIPTER) - MAX_LEN_OF_RSNIE)
-// EAP Code Type.
+/* EAP Code Type. */
#define EAP_CODE_REQUEST 1
#define EAP_CODE_RESPONSE 2
#define EAP_CODE_SUCCESS 3
#define EAP_CODE_FAILURE 4
-// EAPOL frame Protocol Version
+/* EAPOL frame Protocol Version */
#define EAPOL_VER 1
#define EAPOL_VER2 2
-// EAPOL-KEY Descriptor Type
+/* EAPOL-KEY Descriptor Type */
#define WPA1_KEY_DESC 0xfe
#define WPA2_KEY_DESC 0x02
-// Key Descriptor Version of Key Information
+/* Key Descriptor Version of Key Information */
#define DESC_TYPE_TKIP 1
#define DESC_TYPE_AES 2
@@ -73,11 +73,11 @@
#define LEN_MASTER_KEY 32
-// EAPOL EK, MK
+/* EAPOL EK, MK */
#define LEN_EAP_EK 16
#define LEN_EAP_MICK 16
#define LEN_EAP_KEY ((LEN_EAP_EK)+(LEN_EAP_MICK))
-// TKIP key related
+/* TKIP key related */
#define LEN_PMKID 16
#define LEN_TKIP_EK 16
#define LEN_TKIP_RXMICK 8
@@ -94,13 +94,13 @@
#define LEN_PMK_NAME 16
#define LEN_NONCE 32
-// RSN IE Length definition
+/* RSN IE Length definition */
#define MAX_LEN_OF_RSNIE 255
#define MIN_LEN_OF_RSNIE 8
#define KEY_LIFETIME 3600
-//EAP Packet Type
+/*EAP Packet Type */
#define EAPPacket 0
#define EAPOLStart 1
#define EAPOLLogoff 2
@@ -119,28 +119,28 @@
#define PAIRWISEKEY 1
#define GROUPKEY 0
-// Retry timer counter initial value
+/* Retry timer counter initial value */
#define PEER_MSG1_RETRY_TIMER_CTR 0
#define PEER_MSG3_RETRY_TIMER_CTR 10
#define GROUP_MSG1_RETRY_TIMER_CTR 20
-//#ifdef CONFIG_AP_SUPPORT
-// WPA mechanism retry timer interval
-#define PEER_MSG1_RETRY_EXEC_INTV 1000 // 1 sec
-#define PEER_MSG3_RETRY_EXEC_INTV 3000 // 3 sec
-#define GROUP_KEY_UPDATE_EXEC_INTV 1000 // 1 sec
-#define PEER_GROUP_KEY_UPDATE_INIV 2000 // 2 sec
+/*#ifdef CONFIG_AP_SUPPORT */
+/* WPA mechanism retry timer interval */
+#define PEER_MSG1_RETRY_EXEC_INTV 1000 /* 1 sec */
+#define PEER_MSG3_RETRY_EXEC_INTV 3000 /* 3 sec */
+#define GROUP_KEY_UPDATE_EXEC_INTV 1000 /* 1 sec */
+#define PEER_GROUP_KEY_UPDATE_INIV 2000 /* 2 sec */
-#define ENQUEUE_EAPOL_START_TIMER 200 // 200 ms
+#define ENQUEUE_EAPOL_START_TIMER 200 /* 200 ms */
-// group rekey interval
+/* group rekey interval */
#define TIME_REKEY 0
#define PKT_REKEY 1
#define DISABLE_REKEY 2
#define MAX_REKEY 2
#define MAX_REKEY_INTER 0x3ffffff
-//#endif // CONFIG_AP_SUPPORT //
+/*#endif // CONFIG_AP_SUPPORT // */
#define GROUP_SUITE 0
#define PAIRWISE_SUITE 1
@@ -194,13 +194,13 @@
#define IS_WPA_CAPABILITY(a) (((a) >= Ndis802_11AuthModeWPA) && ((a) <= Ndis802_11AuthModeWPA1PSKWPA2PSK))
-// EAPOL Key Information definition within Key descriptor format
+/* EAPOL Key Information definition within Key descriptor format */
typedef struct PACKED _KEY_INFO {
UCHAR KeyMic:1;
UCHAR Secure:1;
UCHAR Error:1;
UCHAR Request:1;
- UCHAR EKD_DL:1; // EKD for AP; DL for STA
+ UCHAR EKD_DL:1; /* EKD for AP; DL for STA */
UCHAR Rsvd:3;
UCHAR KeyDescVer:3;
UCHAR KeyType:1;
@@ -209,7 +209,7 @@ typedef struct PACKED _KEY_INFO {
UCHAR KeyAck:1;
} KEY_INFO, *PKEY_INFO;
-// EAPOL Key descriptor format
+/* EAPOL Key descriptor format */
typedef struct PACKED _KEY_DESCRIPTER {
UCHAR Type;
KEY_INFO KeyInfo;
@@ -231,7 +231,7 @@ typedef struct PACKED _EAPOL_PACKET {
KEY_DESCRIPTER KeyDesc;
} EAPOL_PACKET, *PEAPOL_PACKET;
-//802.11i D10 page 83
+/*802.11i D10 page 83 */
typedef struct PACKED _GTK_ENCAP {
UCHAR Kid:2;
UCHAR tx:1;
@@ -248,7 +248,7 @@ typedef struct PACKED _KDE_ENCAP {
GTK_ENCAP GTKEncap;
} KDE_ENCAP, *PKDE_ENCAP;
-// For WPA1
+/* For WPA1 */
typedef struct PACKED _RSNIE {
UCHAR oui[4];
USHORT version;
@@ -259,7 +259,7 @@ typedef struct PACKED _RSNIE {
} ucast[1];
} RSNIE, *PRSNIE;
-// For WPA2
+/* For WPA2 */
typedef struct PACKED _RSNIE2 {
USHORT version;
UCHAR mcast[4];
@@ -269,7 +269,7 @@ typedef struct PACKED _RSNIE2 {
} ucast[1];
} RSNIE2, *PRSNIE2;
-// AKM Suite
+/* AKM Suite */
typedef struct PACKED _RSNIE_AUTH {
USHORT acount;
struct PACKED {
@@ -294,45 +294,45 @@ typedef struct PACKED _EAP_HDR {
UCHAR Body_Len[2];
UCHAR code;
UCHAR identifier;
- UCHAR length[2]; // including code and identifier, followed by length-2 octets of data
+ UCHAR length[2]; /* including code and identifier, followed by length-2 octets of data */
} EAP_HDR, *PEAP_HDR;
-// For supplicant state machine states. 802.11i Draft 4.1, p. 97
-// We simplified it
+/* For supplicant state machine states. 802.11i Draft 4.1, p. 97 */
+/* We simplified it */
typedef enum _WpaState {
- SS_NOTUSE, // 0
- SS_START, // 1
- SS_WAIT_MSG_3, // 2
- SS_WAIT_GROUP, // 3
- SS_FINISH, // 4
- SS_KEYUPDATE, // 5
+ SS_NOTUSE, /* 0 */
+ SS_START, /* 1 */
+ SS_WAIT_MSG_3, /* 2 */
+ SS_WAIT_GROUP, /* 3 */
+ SS_FINISH, /* 4 */
+ SS_KEYUPDATE, /* 5 */
} WPA_STATE;
-//
-// The definition of the cipher combination
-//
-// bit3 bit2 bit1 bit0
-// +------------+------------+
-// | WPA | WPA2 |
-// +------+-----+------+-----+
-// | TKIP | AES | TKIP | AES |
-// | 0 | 1 | 1 | 0 | -> 0x06
-// | 0 | 1 | 1 | 1 | -> 0x07
-// | 1 | 0 | 0 | 1 | -> 0x09
-// | 1 | 0 | 1 | 1 | -> 0x0B
-// | 1 | 1 | 0 | 1 | -> 0x0D
-// | 1 | 1 | 1 | 0 | -> 0x0E
-// | 1 | 1 | 1 | 1 | -> 0x0F
-// +------+-----+------+-----+
-//
+/* */
+/* The definition of the cipher combination */
+/* */
+/* bit3 bit2 bit1 bit0 */
+/* +------------+------------+ */
+/* | WPA | WPA2 | */
+/* +------+-----+------+-----+ */
+/* | TKIP | AES | TKIP | AES | */
+/* | 0 | 1 | 1 | 0 | -> 0x06 */
+/* | 0 | 1 | 1 | 1 | -> 0x07 */
+/* | 1 | 0 | 0 | 1 | -> 0x09 */
+/* | 1 | 0 | 1 | 1 | -> 0x0B */
+/* | 1 | 1 | 0 | 1 | -> 0x0D */
+/* | 1 | 1 | 1 | 0 | -> 0x0E */
+/* | 1 | 1 | 1 | 1 | -> 0x0F */
+/* +------+-----+------+-----+ */
+/* */
typedef enum _WpaMixPairCipher {
MIX_CIPHER_NOTUSE = 0x00,
- WPA_NONE_WPA2_TKIPAES = 0x03, // WPA2-TKIPAES
+ WPA_NONE_WPA2_TKIPAES = 0x03, /* WPA2-TKIPAES */
WPA_AES_WPA2_TKIP = 0x06,
WPA_AES_WPA2_TKIPAES = 0x07,
WPA_TKIP_WPA2_AES = 0x09,
WPA_TKIP_WPA2_TKIPAES = 0x0B,
- WPA_TKIPAES_WPA2_NONE = 0x0C, // WPA-TKIPAES
+ WPA_TKIPAES_WPA2_NONE = 0x0C, /* WPA-TKIPAES */
WPA_TKIPAES_WPA2_AES = 0x0D,
WPA_TKIPAES_WPA2_TKIP = 0x0E,
WPA_TKIPAES_WPA2_TKIPAES = 0x0F,
@@ -341,22 +341,22 @@ typedef enum _WpaMixPairCipher {
typedef struct PACKED _RSN_IE_HEADER_STRUCT {
UCHAR Eid;
UCHAR Length;
- USHORT Version; // Little endian format
+ USHORT Version; /* Little endian format */
} RSN_IE_HEADER_STRUCT, *PRSN_IE_HEADER_STRUCT;
-// Cipher suite selector types
+/* Cipher suite selector types */
typedef struct PACKED _CIPHER_SUITE_STRUCT {
UCHAR Oui[3];
UCHAR Type;
} CIPHER_SUITE_STRUCT, *PCIPHER_SUITE_STRUCT;
-// Authentication and Key Management suite selector
+/* Authentication and Key Management suite selector */
typedef struct PACKED _AKM_SUITE_STRUCT {
UCHAR Oui[3];
UCHAR Type;
} AKM_SUITE_STRUCT, *PAKM_SUITE_STRUCT;
-// RSN capability
+/* RSN capability */
typedef struct PACKED _RSN_CAPABILITY {
USHORT Rsv:10;
USHORT GTKSAReplayCnt:2;
--
1.6.5.5
More information about the devel
mailing list