[PATCH 163/235] Staging: rt28x0: fix comments in *.c files
Greg Kroah-Hartman
gregkh at suse.de
Fri Dec 11 22:28:25 UTC 2009
From: Bartlomiej Zolnierkiewicz <bzolnier at gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier at gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh at suse.de>
---
drivers/staging/rt2860/chips/rt3070.c | 68 +++---
drivers/staging/rt2860/chips/rt3090.c | 34 ++--
drivers/staging/rt2860/chips/rt30xx.c | 146 ++++++------
drivers/staging/rt2860/pci_main_dev.c | 290 +++++++++++-----------
drivers/staging/rt2860/rt_linux.c | 110 ++++----
drivers/staging/rt2860/rt_main_dev.c | 168 +++++++-------
drivers/staging/rt2860/rt_pci_rbus.c | 166 +++++++-------
drivers/staging/rt2860/rt_usb.c | 106 ++++----
drivers/staging/rt2860/sta_ioctl.c | 368 ++++++++++++++--------------
drivers/staging/rt2860/usb_main_dev.c | 76 +++---
drivers/staging/rt2870/common/rtusb_bulk.c | 170 +++++++-------
drivers/staging/rt2870/common/rtusb_data.c | 10 +-
drivers/staging/rt2870/common/rtusb_io.c | 162 ++++++------
13 files changed, 937 insertions(+), 937 deletions(-)
diff --git a/drivers/staging/rt2860/chips/rt3070.c b/drivers/staging/rt2860/chips/rt3070.c
index eb3b214..4a62087 100644
--- a/drivers/staging/rt2860/chips/rt3070.c
+++ b/drivers/staging/rt2860/chips/rt3070.c
@@ -41,18 +41,18 @@
#ifndef RTMP_RF_RW_SUPPORT
#error "You Should Enable compile flag RTMP_RF_RW_SUPPORT for this chip"
-#endif // RTMP_RF_RW_SUPPORT //
+#endif /* RTMP_RF_RW_SUPPORT // */
VOID NICInitRT3070RFRegisters(IN PRTMP_ADAPTER pAd)
{
INT i;
UCHAR RFValue;
- // Driver must read EEPROM to get RfIcType before initial RF registers
- // Initialize RF register to default value
+ /* Driver must read EEPROM to get RfIcType before initial RF registers */
+ /* Initialize RF register to default value */
if (IS_RT3070(pAd) || IS_RT3071(pAd)) {
- // Init RF calibration
- // Driver should toggle RF R30 bit7 before init RF registers
+ /* Init RF calibration */
+ /* Driver should toggle RF R30 bit7 before init RF registers */
UINT32 RfReg = 0;
UINT32 data;
@@ -63,38 +63,38 @@ VOID NICInitRT3070RFRegisters(IN PRTMP_ADAPTER pAd)
RfReg &= 0x7F;
RT30xxWriteRFRegister(pAd, RF_R30, (UCHAR) RfReg);
- // Initialize RF register to default value
+ /* Initialize RF register to default value */
for (i = 0; i < NUM_RF_REG_PARMS; i++) {
RT30xxWriteRFRegister(pAd,
RT30xx_RFRegTable[i].Register,
RT30xx_RFRegTable[i].Value);
}
- // add by johnli
+ /* add by johnli */
if (IS_RT3070(pAd)) {
- //
- // The DAC issue(LDO_CFG0) has been fixed in RT3070(F).
- // The voltage raising patch is no longer needed for RT3070(F)
- //
+ /* */
+ /* The DAC issue(LDO_CFG0) has been fixed in RT3070(F). */
+ /* The voltage raising patch is no longer needed for RT3070(F) */
+ /* */
if ((pAd->MACVersion & 0xffff) < 0x0201) {
- // Update MAC 0x05D4 from 01xxxxxx to 0Dxxxxxx (voltage 1.2V to 1.35V) for RT3070 to improve yield rate
+ /* Update MAC 0x05D4 from 01xxxxxx to 0Dxxxxxx (voltage 1.2V to 1.35V) for RT3070 to improve yield rate */
RTUSBReadMACRegister(pAd, LDO_CFG0, &data);
data = ((data & 0xF0FFFFFF) | 0x0D000000);
RTUSBWriteMACRegister(pAd, LDO_CFG0, data);
}
} else if (IS_RT3071(pAd)) {
- // Driver should set RF R6 bit6 on before init RF registers
+ /* Driver should set RF R6 bit6 on before init RF registers */
RT30xxReadRFRegister(pAd, RF_R06, (PUCHAR) & RfReg);
RfReg |= 0x40;
RT30xxWriteRFRegister(pAd, RF_R06, (UCHAR) RfReg);
- // init R31
+ /* init R31 */
RT30xxWriteRFRegister(pAd, RF_R31, 0x14);
- // RT3071 version E has fixed this issue
+ /* RT3071 version E has fixed this issue */
if ((pAd->NicConfig2.field.DACTestBit == 1)
&& ((pAd->MACVersion & 0xffff) < 0x0211)) {
- // patch tx EVM issue temporarily
+ /* patch tx EVM issue temporarily */
RTUSBReadMACRegister(pAd, LDO_CFG0, &data);
data = ((data & 0xE0FFFFFF) | 0x0D000000);
RTUSBWriteMACRegister(pAd, LDO_CFG0, data);
@@ -104,35 +104,35 @@ VOID NICInitRT3070RFRegisters(IN PRTMP_ADAPTER pAd)
RTMP_IO_WRITE32(pAd, LDO_CFG0, data);
}
- // patch LNA_PE_G1 failed issue
+ /* patch LNA_PE_G1 failed issue */
RTUSBReadMACRegister(pAd, GPIO_SWITCH, &data);
data &= ~(0x20);
RTUSBWriteMACRegister(pAd, GPIO_SWITCH, data);
}
- //For RF filter Calibration
+ /*For RF filter Calibration */
RTMPFilterCalibration(pAd);
- // Initialize RF R27 register, set RF R27 must be behind RTMPFilterCalibration()
- //
- // TX to RX IQ glitch(RF_R27) has been fixed in RT3070(F).
- // Raising RF voltage is no longer needed for RT3070(F)
- //
+ /* Initialize RF R27 register, set RF R27 must be behind RTMPFilterCalibration() */
+ /* */
+ /* TX to RX IQ glitch(RF_R27) has been fixed in RT3070(F). */
+ /* Raising RF voltage is no longer needed for RT3070(F) */
+ /* */
if ((IS_RT3070(pAd)) && ((pAd->MACVersion & 0xffff) < 0x0201)) {
RT30xxWriteRFRegister(pAd, RF_R27, 0x3);
} else if ((IS_RT3071(pAd))
&& ((pAd->MACVersion & 0xffff) < 0x0211)) {
RT30xxWriteRFRegister(pAd, RF_R27, 0x3);
}
- // set led open drain enable
+ /* set led open drain enable */
RTUSBReadMACRegister(pAd, OPT_14, &data);
data |= 0x01;
RTUSBWriteMACRegister(pAd, OPT_14, data);
- // move from RT30xxLoadRFNormalModeSetup because it's needed for both RT3070 and RT3071
- // TX_LO1_en, RF R17 register Bit 3 to 0
+ /* move from RT30xxLoadRFNormalModeSetup because it's needed for both RT3070 and RT3071 */
+ /* TX_LO1_en, RF R17 register Bit 3 to 0 */
RT30xxReadRFRegister(pAd, RF_R17, &RFValue);
RFValue &= (~0x08);
- // to fix rx long range issue
+ /* to fix rx long range issue */
if (pAd->NicConfig2.field.ExternalLNAForG == 0) {
if ((IS_RT3071(pAd)
&& ((pAd->MACVersion & 0xffff) >= 0x0211))
@@ -140,22 +140,22 @@ VOID NICInitRT3070RFRegisters(IN PRTMP_ADAPTER pAd)
RFValue |= 0x20;
}
}
- // set RF_R17_bit[2:0] equal to EEPROM setting at 0x48h
+ /* set RF_R17_bit[2:0] equal to EEPROM setting at 0x48h */
if (pAd->TxMixerGain24G >= 1) {
- RFValue &= (~0x7); // clean bit [2:0]
+ RFValue &= (~0x7); /* clean bit [2:0] */
RFValue |= pAd->TxMixerGain24G;
}
RT30xxWriteRFRegister(pAd, RF_R17, RFValue);
if (IS_RT3071(pAd)) {
- // add by johnli, RF power sequence setup, load RF normal operation-mode setup
+ /* add by johnli, RF power sequence setup, load RF normal operation-mode setup */
RT30xxLoadRFNormalModeSetup(pAd);
} else if (IS_RT3070(pAd)) {
/* add by johnli, reset RF_R27 when interface down & up to fix throughput problem */
- // LDORF_VC, RF R27 register Bit 2 to 0
+ /* LDORF_VC, RF R27 register Bit 2 to 0 */
RT30xxReadRFRegister(pAd, RF_R27, &RFValue);
- // TX to RX IQ glitch(RF_R27) has been fixed in RT3070(F).
- // Raising RF voltage is no longer needed for RT3070(F)
+ /* TX to RX IQ glitch(RF_R27) has been fixed in RT3070(F). */
+ /* Raising RF voltage is no longer needed for RT3070(F) */
if ((pAd->MACVersion & 0xffff) < 0x0201)
RFValue = (RFValue & (~0x77)) | 0x3;
else
@@ -166,4 +166,4 @@ VOID NICInitRT3070RFRegisters(IN PRTMP_ADAPTER pAd)
}
}
-#endif // RT3070 //
+#endif /* RT3070 // */
diff --git a/drivers/staging/rt2860/chips/rt3090.c b/drivers/staging/rt2860/chips/rt3090.c
index 1435294..cedacfb 100644
--- a/drivers/staging/rt2860/chips/rt3090.c
+++ b/drivers/staging/rt2860/chips/rt3090.c
@@ -41,16 +41,16 @@
#ifndef RTMP_RF_RW_SUPPORT
#error "You Should Enable compile flag RTMP_RF_RW_SUPPORT for this chip"
-#endif // RTMP_RF_RW_SUPPORT //
+#endif /* RTMP_RF_RW_SUPPORT // */
VOID NICInitRT3090RFRegisters(IN PRTMP_ADAPTER pAd)
{
INT i;
- // Driver must read EEPROM to get RfIcType before initial RF registers
- // Initialize RF register to default value
+ /* Driver must read EEPROM to get RfIcType before initial RF registers */
+ /* Initialize RF register to default value */
if (IS_RT3090(pAd)) {
- // Init RF calibration
- // Driver should toggle RF R30 bit7 before init RF registers
+ /* Init RF calibration */
+ /* Driver should toggle RF R30 bit7 before init RF registers */
UINT32 RfReg = 0, data;
RT30xxReadRFRegister(pAd, RF_R30, (PUCHAR) & RfReg);
@@ -60,14 +60,14 @@ VOID NICInitRT3090RFRegisters(IN PRTMP_ADAPTER pAd)
RfReg &= 0x7F;
RT30xxWriteRFRegister(pAd, RF_R30, (UCHAR) RfReg);
- // init R24, R31
+ /* init R24, R31 */
RT30xxWriteRFRegister(pAd, RF_R24, 0x0F);
RT30xxWriteRFRegister(pAd, RF_R31, 0x0F);
- // RT309x version E has fixed this issue
+ /* RT309x version E has fixed this issue */
if ((pAd->NicConfig2.field.DACTestBit == 1)
&& ((pAd->MACVersion & 0xffff) < 0x0211)) {
- // patch tx EVM issue temporarily
+ /* patch tx EVM issue temporarily */
RTMP_IO_READ32(pAd, LDO_CFG0, &data);
data = ((data & 0xE0FFFFFF) | 0x0D000000);
RTMP_IO_WRITE32(pAd, LDO_CFG0, data);
@@ -77,43 +77,43 @@ VOID NICInitRT3090RFRegisters(IN PRTMP_ADAPTER pAd)
RTMP_IO_WRITE32(pAd, LDO_CFG0, data);
}
- // patch LNA_PE_G1 failed issue
+ /* patch LNA_PE_G1 failed issue */
RTMP_IO_READ32(pAd, GPIO_SWITCH, &data);
data &= ~(0x20);
RTMP_IO_WRITE32(pAd, GPIO_SWITCH, data);
- // Initialize RF register to default value
+ /* Initialize RF register to default value */
for (i = 0; i < NUM_RF_REG_PARMS; i++) {
RT30xxWriteRFRegister(pAd,
RT30xx_RFRegTable[i].Register,
RT30xx_RFRegTable[i].Value);
}
- // Driver should set RF R6 bit6 on before calibration
+ /* Driver should set RF R6 bit6 on before calibration */
RT30xxReadRFRegister(pAd, RF_R06, (PUCHAR) & RfReg);
RfReg |= 0x40;
RT30xxWriteRFRegister(pAd, RF_R06, (UCHAR) RfReg);
- //For RF filter Calibration
+ /*For RF filter Calibration */
RTMPFilterCalibration(pAd);
- // Initialize RF R27 register, set RF R27 must be behind RTMPFilterCalibration()
+ /* Initialize RF R27 register, set RF R27 must be behind RTMPFilterCalibration() */
if ((pAd->MACVersion & 0xffff) < 0x0211)
RT30xxWriteRFRegister(pAd, RF_R27, 0x3);
- // set led open drain enable
+ /* set led open drain enable */
RTMP_IO_READ32(pAd, OPT_14, &data);
data |= 0x01;
RTMP_IO_WRITE32(pAd, OPT_14, data);
- // set default antenna as main
+ /* set default antenna as main */
if (pAd->RfIcType == RFIC_3020)
AsicSetRxAnt(pAd, pAd->RxAnt.Pair1PrimaryRxAnt);
- // add by johnli, RF power sequence setup, load RF normal operation-mode setup
+ /* add by johnli, RF power sequence setup, load RF normal operation-mode setup */
RT30xxLoadRFNormalModeSetup(pAd);
}
}
-#endif // RT3090 //
+#endif /* RT3090 // */
diff --git a/drivers/staging/rt2860/chips/rt30xx.c b/drivers/staging/rt2860/chips/rt30xx.c
index 940f731..b03d94d 100644
--- a/drivers/staging/rt2860/chips/rt30xx.c
+++ b/drivers/staging/rt2860/chips/rt30xx.c
@@ -39,13 +39,13 @@
#ifndef RTMP_RF_RW_SUPPORT
#error "You Should Enable compile flag RTMP_RF_RW_SUPPORT for this chip"
-#endif // RTMP_RF_RW_SUPPORT //
+#endif /* RTMP_RF_RW_SUPPORT // */
#include "../rt_config.h"
-//
-// RF register initialization set
-//
+/* */
+/* RF register initialization set */
+/* */
REG_PAIR RT30xx_RFRegTable[] = {
{RF_R04, 0x40}
,
@@ -89,12 +89,12 @@ REG_PAIR RT30xx_RFRegTable[] = {
UCHAR NUM_RF_REG_PARMS = (sizeof(RT30xx_RFRegTable) / sizeof(REG_PAIR));
-// Antenna divesity use GPIO3 and EESK pin for control
-// Antenna and EEPROM access are both using EESK pin,
-// Therefor we should avoid accessing EESK at the same time
-// Then restore antenna after EEPROM access
-// The original name of this function is AsicSetRxAnt(), now change to
-//VOID AsicSetRxAnt(
+/* Antenna divesity use GPIO3 and EESK pin for control */
+/* Antenna and EEPROM access are both using EESK pin, */
+/* Therefor we should avoid accessing EESK at the same time */
+/* Then restore antenna after EEPROM access */
+/* The original name of this function is AsicSetRxAnt(), now change to */
+/*VOID AsicSetRxAnt( */
VOID RT30xxSetRxAnt(IN PRTMP_ADAPTER pAd, IN UCHAR Ant)
{
UINT32 Value;
@@ -109,16 +109,16 @@ VOID RT30xxSetRxAnt(IN PRTMP_ADAPTER pAd, IN UCHAR Ant)
(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST))) {
return;
}
- // the antenna selection is through firmware and MAC register(GPIO3)
+ /* the antenna selection is through firmware and MAC register(GPIO3) */
if (Ant == 0) {
- // Main antenna
+ /* Main antenna */
#ifdef RTMP_MAC_PCI
RTMP_IO_READ32(pAd, E2PROM_CSR, &x);
x |= (EESK);
RTMP_IO_WRITE32(pAd, E2PROM_CSR, x);
#else
AsicSendCommandToMcu(pAd, 0x73, 0xFF, 0x1, 0x0);
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
RTMP_IO_READ32(pAd, GPIO_CTRL_CFG, &Value);
Value &= ~(0x0808);
@@ -126,14 +126,14 @@ VOID RT30xxSetRxAnt(IN PRTMP_ADAPTER pAd, IN UCHAR Ant)
DBGPRINT_RAW(RT_DEBUG_TRACE,
("AsicSetRxAnt, switch to main antenna\n"));
} else {
- // Aux antenna
+ /* Aux antenna */
#ifdef RTMP_MAC_PCI
RTMP_IO_READ32(pAd, E2PROM_CSR, &x);
x &= ~(EESK);
RTMP_IO_WRITE32(pAd, E2PROM_CSR, x);
#else
AsicSendCommandToMcu(pAd, 0x73, 0xFF, 0x0, 0x0);
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
RTMP_IO_READ32(pAd, GPIO_CTRL_CFG, &Value);
Value &= ~(0x0808);
Value |= 0x08;
@@ -165,14 +165,14 @@ VOID RTMPFilterCalibration(IN PRTMP_ADAPTER pAd)
UINT loop = 0, count = 0, loopcnt = 0, ReTry = 0;
UCHAR RF_R24_Value = 0;
- // Give bbp filter initial value
+ /* Give bbp filter initial value */
pAd->Mlme.CaliBW20RfR24 = 0x1F;
- pAd->Mlme.CaliBW40RfR24 = 0x2F; //Bit[5] must be 1 for BW 40
+ pAd->Mlme.CaliBW40RfR24 = 0x2F; /*Bit[5] must be 1 for BW 40 */
do {
- if (loop == 1) //BandWidth = 40 MHz
+ if (loop == 1) /*BandWidth = 40 MHz */
{
- // Write 0x27 to RF_R24 to program filter
+ /* Write 0x27 to RF_R24 to program filter */
RF_R24_Value = 0x27;
RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value);
if (IS_RT3090(pAd) || IS_RT3572(pAd) || IS_RT3390(pAd))
@@ -180,19 +180,19 @@ VOID RTMPFilterCalibration(IN PRTMP_ADAPTER pAd)
else
FilterTarget = 0x19;
- // when calibrate BW40, BBP mask must set to BW40.
+ /* when calibrate BW40, BBP mask must set to BW40. */
RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue);
BBPValue &= (~0x18);
BBPValue |= (0x10);
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue);
- // set to BW40
+ /* set to BW40 */
RT30xxReadRFRegister(pAd, RF_R31, &value);
value |= 0x20;
RT30xxWriteRFRegister(pAd, RF_R31, value);
- } else //BandWidth = 20 MHz
+ } else /*BandWidth = 20 MHz */
{
- // Write 0x07 to RF_R24 to program filter
+ /* Write 0x07 to RF_R24 to program filter */
RF_R24_Value = 0x07;
RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value);
if (IS_RT3090(pAd) || IS_RT3572(pAd) || IS_RT3390(pAd))
@@ -200,39 +200,39 @@ VOID RTMPFilterCalibration(IN PRTMP_ADAPTER pAd)
else
FilterTarget = 0x16;
- // set to BW20
+ /* set to BW20 */
RT30xxReadRFRegister(pAd, RF_R31, &value);
value &= (~0x20);
RT30xxWriteRFRegister(pAd, RF_R31, value);
}
- // Write 0x01 to RF_R22 to enable baseband loopback mode
+ /* Write 0x01 to RF_R22 to enable baseband loopback mode */
RT30xxReadRFRegister(pAd, RF_R22, &value);
value |= 0x01;
RT30xxWriteRFRegister(pAd, RF_R22, value);
- // Write 0x00 to BBP_R24 to set power & frequency of passband test tone
+ /* Write 0x00 to BBP_R24 to set power & frequency of passband test tone */
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R24, 0);
do {
- // Write 0x90 to BBP_R25 to transmit test tone
+ /* Write 0x90 to BBP_R25 to transmit test tone */
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R25, 0x90);
RTMPusecDelay(1000);
- // Read BBP_R55[6:0] for received power, set R55x = BBP_R55[6:0]
+ /* Read BBP_R55[6:0] for received power, set R55x = BBP_R55[6:0] */
RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R55, &value);
R55x = value & 0xFF;
} while ((ReTry++ < 100) && (R55x == 0));
- // Write 0x06 to BBP_R24 to set power & frequency of stopband test tone
+ /* Write 0x06 to BBP_R24 to set power & frequency of stopband test tone */
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R24, 0x06);
while (TRUE) {
- // Write 0x90 to BBP_R25 to transmit test tone
+ /* Write 0x90 to BBP_R25 to transmit test tone */
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R25, 0x90);
- //We need to wait for calibration
+ /*We need to wait for calibration */
RTMPusecDelay(1000);
RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R55, &value);
value &= 0xFF;
@@ -245,27 +245,27 @@ VOID RTMPFilterCalibration(IN PRTMP_ADAPTER pAd)
break;
}
- // prevent infinite loop cause driver hang.
+ /* prevent infinite loop cause driver hang. */
if (loopcnt++ > 100) {
DBGPRINT(RT_DEBUG_ERROR,
("RTMPFilterCalibration - can't find a valid value, loopcnt=%d stop calibrating",
loopcnt));
break;
}
- // Write RF_R24 to program filter
+ /* Write RF_R24 to program filter */
RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value);
}
if (count > 0) {
RF_R24_Value = RF_R24_Value - ((count) ? (1) : (0));
}
- // Store for future usage
+ /* Store for future usage */
if (loopcnt < 100) {
if (loop++ == 0) {
- //BandWidth = 20 MHz
+ /*BandWidth = 20 MHz */
pAd->Mlme.CaliBW20RfR24 = (UCHAR) RF_R24_Value;
} else {
- //BandWidth = 40 MHz
+ /*BandWidth = 40 MHz */
pAd->Mlme.CaliBW40RfR24 = (UCHAR) RF_R24_Value;
break;
}
@@ -274,20 +274,20 @@ VOID RTMPFilterCalibration(IN PRTMP_ADAPTER pAd)
RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value);
- // reset count
+ /* reset count */
count = 0;
} while (TRUE);
- //
- // Set back to initial state
- //
+ /* */
+ /* Set back to initial state */
+ /* */
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R24, 0);
RT30xxReadRFRegister(pAd, RF_R22, &value);
value &= ~(0x01);
RT30xxWriteRFRegister(pAd, RF_R22, value);
- // set BBP back to BW20
+ /* set BBP back to BW20 */
RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue);
BBPValue &= (~0x18);
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue);
@@ -297,7 +297,7 @@ VOID RTMPFilterCalibration(IN PRTMP_ADAPTER pAd)
pAd->Mlme.CaliBW20RfR24, pAd->Mlme.CaliBW40RfR24));
}
-// add by johnli, RF power sequence setup
+/* add by johnli, RF power sequence setup */
/*
==========================================================================
Description:
@@ -310,12 +310,12 @@ VOID RT30xxLoadRFNormalModeSetup(IN PRTMP_ADAPTER pAd)
{
UCHAR RFValue;
- // RX0_PD & TX0_PD, RF R1 register Bit 2 & Bit 3 to 0 and RF_BLOCK_en,RX1_PD & TX1_PD, Bit0, Bit 4 & Bit5 to 1
+ /* RX0_PD & TX0_PD, RF R1 register Bit 2 & Bit 3 to 0 and RF_BLOCK_en,RX1_PD & TX1_PD, Bit0, Bit 4 & Bit5 to 1 */
RT30xxReadRFRegister(pAd, RF_R01, &RFValue);
RFValue = (RFValue & (~0x0C)) | 0x31;
RT30xxWriteRFRegister(pAd, RF_R01, RFValue);
- // TX_LO2_en, RF R15 register Bit 3 to 0
+ /* TX_LO2_en, RF R15 register Bit 3 to 0 */
RT30xxReadRFRegister(pAd, RF_R15, &RFValue);
RFValue &= (~0x08);
RT30xxWriteRFRegister(pAd, RF_R15, RFValue);
@@ -338,22 +338,22 @@ VOID RT30xxLoadRFNormalModeSetup(IN PRTMP_ADAPTER pAd)
RT30xxWriteRFRegister(pAd, RF_R17, RFValue);
*/
- // RX_LO1_en, RF R20 register Bit 3 to 0
+ /* RX_LO1_en, RF R20 register Bit 3 to 0 */
RT30xxReadRFRegister(pAd, RF_R20, &RFValue);
RFValue &= (~0x08);
RT30xxWriteRFRegister(pAd, RF_R20, RFValue);
- // RX_LO2_en, RF R21 register Bit 3 to 0
+ /* RX_LO2_en, RF R21 register Bit 3 to 0 */
RT30xxReadRFRegister(pAd, RF_R21, &RFValue);
RFValue &= (~0x08);
RT30xxWriteRFRegister(pAd, RF_R21, RFValue);
/* add by johnli, reset RF_R27 when interface down & up to fix throughput problem */
- // LDORF_VC, RF R27 register Bit 2 to 0
+ /* LDORF_VC, RF R27 register Bit 2 to 0 */
RT30xxReadRFRegister(pAd, RF_R27, &RFValue);
- // TX to RX IQ glitch(RF_R27) has been fixed in RT3070(F).
- // Raising RF voltage is no longer needed for RT3070(F)
- if (IS_RT3090(pAd)) // RT309x and RT3071/72
+ /* TX to RX IQ glitch(RF_R27) has been fixed in RT3070(F). */
+ /* Raising RF voltage is no longer needed for RT3070(F) */
+ if (IS_RT3090(pAd)) /* RT309x and RT3071/72 */
{
if ((pAd->MACVersion & 0xffff) < 0x0211)
RFValue = (RFValue & (~0x77)) | 0x3;
@@ -379,35 +379,35 @@ VOID RT30xxLoadRFSleepModeSetup(IN PRTMP_ADAPTER pAd)
#ifdef RTMP_MAC_USB
if (!IS_RT3572(pAd))
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
{
- // RF_BLOCK_en. RF R1 register Bit 0 to 0
+ /* RF_BLOCK_en. RF R1 register Bit 0 to 0 */
RT30xxReadRFRegister(pAd, RF_R01, &RFValue);
RFValue &= (~0x01);
RT30xxWriteRFRegister(pAd, RF_R01, RFValue);
- // VCO_IC, RF R7 register Bit 4 & Bit 5 to 0
+ /* VCO_IC, RF R7 register Bit 4 & Bit 5 to 0 */
RT30xxReadRFRegister(pAd, RF_R07, &RFValue);
RFValue &= (~0x30);
RT30xxWriteRFRegister(pAd, RF_R07, RFValue);
- // Idoh, RF R9 register Bit 1, Bit 2 & Bit 3 to 0
+ /* Idoh, RF R9 register Bit 1, Bit 2 & Bit 3 to 0 */
RT30xxReadRFRegister(pAd, RF_R09, &RFValue);
RFValue &= (~0x0E);
RT30xxWriteRFRegister(pAd, RF_R09, RFValue);
- // RX_CTB_en, RF R21 register Bit 7 to 0
+ /* RX_CTB_en, RF R21 register Bit 7 to 0 */
RT30xxReadRFRegister(pAd, RF_R21, &RFValue);
RFValue &= (~0x80);
RT30xxWriteRFRegister(pAd, RF_R21, RFValue);
}
- if (IS_RT3090(pAd) || // IS_RT3090 including RT309x and RT3071/72
+ if (IS_RT3090(pAd) || /* IS_RT3090 including RT309x and RT3071/72 */
IS_RT3572(pAd) ||
(IS_RT3070(pAd) && ((pAd->MACVersion & 0xffff) < 0x0201))) {
#ifdef RTMP_MAC_USB
if (!IS_RT3572(pAd))
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
{
RT30xxReadRFRegister(pAd, RF_R27, &RFValue);
RFValue |= 0x77;
@@ -435,36 +435,36 @@ VOID RT30xxReverseRFSleepModeSetup(IN PRTMP_ADAPTER pAd)
#ifdef RTMP_MAC_USB
if (!IS_RT3572(pAd))
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
{
- // RF_BLOCK_en, RF R1 register Bit 0 to 1
+ /* RF_BLOCK_en, RF R1 register Bit 0 to 1 */
RT30xxReadRFRegister(pAd, RF_R01, &RFValue);
RFValue |= 0x01;
RT30xxWriteRFRegister(pAd, RF_R01, RFValue);
- // VCO_IC, RF R7 register Bit 4 & Bit 5 to 1
+ /* VCO_IC, RF R7 register Bit 4 & Bit 5 to 1 */
RT30xxReadRFRegister(pAd, RF_R07, &RFValue);
RFValue |= 0x30;
RT30xxWriteRFRegister(pAd, RF_R07, RFValue);
- // Idoh, RF R9 register Bit 1, Bit 2 & Bit 3 to 1
+ /* Idoh, RF R9 register Bit 1, Bit 2 & Bit 3 to 1 */
RT30xxReadRFRegister(pAd, RF_R09, &RFValue);
RFValue |= 0x0E;
RT30xxWriteRFRegister(pAd, RF_R09, RFValue);
- // RX_CTB_en, RF R21 register Bit 7 to 1
+ /* RX_CTB_en, RF R21 register Bit 7 to 1 */
RT30xxReadRFRegister(pAd, RF_R21, &RFValue);
RFValue |= 0x80;
RT30xxWriteRFRegister(pAd, RF_R21, RFValue);
}
- if (IS_RT3090(pAd) || // IS_RT3090 including RT309x and RT3071/72
+ if (IS_RT3090(pAd) || /* IS_RT3090 including RT309x and RT3071/72 */
IS_RT3572(pAd) ||
IS_RT3390(pAd) ||
(IS_RT3070(pAd) && ((pAd->MACVersion & 0xffff) < 0x0201))) {
#ifdef RTMP_MAC_USB
if (!IS_RT3572(pAd))
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
{
RT30xxReadRFRegister(pAd, RF_R27, &RFValue);
if ((pAd->MACVersion & 0xffff) < 0x0211)
@@ -473,10 +473,10 @@ VOID RT30xxReverseRFSleepModeSetup(IN PRTMP_ADAPTER pAd)
RFValue = (RFValue & (~0x77));
RT30xxWriteRFRegister(pAd, RF_R27, RFValue);
}
- // RT3071 version E has fixed this issue
+ /* RT3071 version E has fixed this issue */
if ((pAd->NicConfig2.field.DACTestBit == 1)
&& ((pAd->MACVersion & 0xffff) < 0x0211)) {
- // patch tx EVM issue temporarily
+ /* patch tx EVM issue temporarily */
RTMP_IO_READ32(pAd, LDO_CFG0, &MACValue);
MACValue = ((MACValue & 0xE0FFFFFF) | 0x0D000000);
RTMP_IO_WRITE32(pAd, LDO_CFG0, MACValue);
@@ -491,22 +491,22 @@ VOID RT30xxReverseRFSleepModeSetup(IN PRTMP_ADAPTER pAd)
RT30xxWriteRFRegister(pAd, RF_R08, 0x80);
}
-// end johnli
+/* end johnli */
VOID RT30xxHaltAction(IN PRTMP_ADAPTER pAd)
{
UINT32 TxPinCfg = 0x00050F0F;
- //
- // Turn off LNA_PE or TRSW_POL
- //
+ /* */
+ /* Turn off LNA_PE or TRSW_POL */
+ /* */
if (IS_RT3070(pAd) || IS_RT3071(pAd) || IS_RT3572(pAd)) {
if ((IS_RT3071(pAd) || IS_RT3572(pAd))
#ifdef RTMP_EFUSE_SUPPORT
&& (pAd->bUseEfuse)
-#endif // RTMP_EFUSE_SUPPORT //
+#endif /* RTMP_EFUSE_SUPPORT // */
) {
- TxPinCfg &= 0xFFFBF0F0; // bit18 off
+ TxPinCfg &= 0xFFFBF0F0; /* bit18 off */
} else {
TxPinCfg &= 0xFFFFF0F0;
}
@@ -515,4 +515,4 @@ VOID RT30xxHaltAction(IN PRTMP_ADAPTER pAd)
}
}
-#endif // RT30xx //
+#endif /* RT30xx // */
diff --git a/drivers/staging/rt2860/pci_main_dev.c b/drivers/staging/rt2860/pci_main_dev.c
index 2a22e45..76c71f1 100644
--- a/drivers/staging/rt2860/pci_main_dev.c
+++ b/drivers/staging/rt2860/pci_main_dev.c
@@ -38,17 +38,17 @@
#include "rt_config.h"
#include <linux/pci.h>
-// Following information will be show when you run 'modinfo'
-// *** If you have a solution for the bug in current version of driver, please mail to me.
-// Otherwise post to forum in ralinktech's web site(www.ralinktech.com) and let all users help you. ***
+/* Following information will be show when you run 'modinfo' */
+/* *** If you have a solution for the bug in current version of driver, please mail to me. */
+/* Otherwise post to forum in ralinktech's web site(www.ralinktech.com) and let all users help you. *** */
MODULE_AUTHOR("Jett Chen <jett_chen at ralinktech.com>");
MODULE_DESCRIPTION("RT2860/RT3090 Wireless Lan Linux Driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("rt3090sta");
-//
-// Function declarations
-//
+/* */
+/* Function declarations */
+/* */
extern int rt28xx_close(IN struct net_device *net_dev);
extern int rt28xx_open(struct net_device *net_dev);
@@ -64,14 +64,14 @@ static VOID RTMPInitPCIeDevice(IN struct pci_dev *pci_dev,
#ifdef CONFIG_PM
static int rt2860_suspend(struct pci_dev *pci_dev, pm_message_t state);
static int rt2860_resume(struct pci_dev *pci_dev);
-#endif // CONFIG_PM //
+#endif /* CONFIG_PM // */
-//
-// Ralink PCI device table, include all supported chipsets
-//
+/* */
+/* Ralink PCI device table, include all supported chipsets */
+/* */
static struct pci_device_id rt2860_pci_tbl[] __devinitdata = {
#ifdef RT2860
- {PCI_DEVICE(NIC_PCI_VENDOR_ID, NIC2860_PCI_DEVICE_ID)}, //RT28602.4G
+ {PCI_DEVICE(NIC_PCI_VENDOR_ID, NIC2860_PCI_DEVICE_ID)}, /*RT28602.4G */
{PCI_DEVICE(NIC_PCI_VENDOR_ID, NIC2860_PCIe_DEVICE_ID)},
{PCI_DEVICE(NIC_PCI_VENDOR_ID, NIC2760_PCI_DEVICE_ID)},
{PCI_DEVICE(NIC_PCI_VENDOR_ID, NIC2790_PCIe_DEVICE_ID)},
@@ -88,13 +88,13 @@ static struct pci_device_id rt2860_pci_tbl[] __devinitdata = {
{PCI_DEVICE(NIC_PCI_VENDOR_ID, NIC3090_PCIe_DEVICE_ID)},
{PCI_DEVICE(NIC_PCI_VENDOR_ID, NIC3091_PCIe_DEVICE_ID)},
{PCI_DEVICE(NIC_PCI_VENDOR_ID, NIC3092_PCIe_DEVICE_ID)},
-#endif // RT3090 //
+#endif /* RT3090 // */
#ifdef RT3390
{PCI_DEVICE(NIC_PCI_VENDOR_ID, NIC3390_PCIe_DEVICE_ID)},
{PCI_DEVICE(NIC_PCI_VENDOR_ID, NIC3391_PCIe_DEVICE_ID)},
{PCI_DEVICE(NIC_PCI_VENDOR_ID, NIC3392_PCIe_DEVICE_ID)},
-#endif // RT3390 //
- {0,} // terminate list
+#endif /* RT3390 // */
+ {0,} /* terminate list */
};
MODULE_DEVICE_TABLE(pci, rt2860_pci_tbl);
@@ -102,9 +102,9 @@ MODULE_DEVICE_TABLE(pci, rt2860_pci_tbl);
MODULE_VERSION(STA_DRIVER_VERSION);
#endif
-//
-// Our PCI driver structure
-//
+/* */
+/* Our PCI driver structure */
+/* */
static struct pci_driver rt2860_driver = {
name: "rt2860",
id_table:rt2860_pci_tbl,
@@ -125,8 +125,8 @@ resume:rt2860_resume,
VOID RT2860RejectPendingPackets(IN PRTMP_ADAPTER pAd)
{
- // clear PS packets
- // clear TxSw packets
+ /* clear PS packets */
+ /* clear TxSw packets */
}
static int rt2860_suspend(struct pci_dev *pci_dev, pm_message_t state)
@@ -146,33 +146,33 @@ static int rt2860_suspend(struct pci_dev *pci_dev, pm_message_t state)
/* and 1 suspend/resume function for 1 module, not for each interface */
/* so Linux will call suspend/resume function once */
if (VIRTUAL_IF_NUM(pAd) > 0) {
- // avoid users do suspend after interface is down
+ /* avoid users do suspend after interface is down */
- // stop interface
+ /* stop interface */
netif_carrier_off(net_dev);
netif_stop_queue(net_dev);
- // mark device as removed from system and therefore no longer available
+ /* mark device as removed from system and therefore no longer available */
netif_device_detach(net_dev);
- // mark halt flag
+ /* mark halt flag */
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS);
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF);
- // take down the device
+ /* take down the device */
rt28xx_close((PNET_DEV) net_dev);
RT_MOD_DEC_USE_COUNT();
}
}
- // reference to http://vovo2000.com/type-lab/linux/kernel-api/linux-kernel-api.html
- // enable device to generate PME# when suspended
- // pci_choose_state(): Choose the power state of a PCI device to be suspended
+ /* reference to http://vovo2000.com/type-lab/linux/kernel-api/linux-kernel-api.html */
+ /* enable device to generate PME# when suspended */
+ /* pci_choose_state(): Choose the power state of a PCI device to be suspended */
retval = pci_enable_wake(pci_dev, pci_choose_state(pci_dev, state), 1);
- // save the PCI configuration space of a device before suspending
+ /* save the PCI configuration space of a device before suspending */
pci_save_state(pci_dev);
- // disable PCI device after use
+ /* disable PCI device after use */
pci_disable_device(pci_dev);
retval = pci_set_power_state(pci_dev, pci_choose_state(pci_dev, state));
@@ -187,22 +187,22 @@ static int rt2860_resume(struct pci_dev *pci_dev)
PRTMP_ADAPTER pAd = (PRTMP_ADAPTER) NULL;
INT32 retval;
- // set the power state of a PCI device
- // PCI has 4 power states, DO (normal) ~ D3(less power)
- // in include/linux/pci.h, you can find that
- // #define PCI_D0 ((pci_power_t __force) 0)
- // #define PCI_D1 ((pci_power_t __force) 1)
- // #define PCI_D2 ((pci_power_t __force) 2)
- // #define PCI_D3hot ((pci_power_t __force) 3)
- // #define PCI_D3cold ((pci_power_t __force) 4)
- // #define PCI_UNKNOWN ((pci_power_t __force) 5)
- // #define PCI_POWER_ERROR ((pci_power_t __force) -1)
+ /* set the power state of a PCI device */
+ /* PCI has 4 power states, DO (normal) ~ D3(less power) */
+ /* in include/linux/pci.h, you can find that */
+ /* #define PCI_D0 ((pci_power_t __force) 0) */
+ /* #define PCI_D1 ((pci_power_t __force) 1) */
+ /* #define PCI_D2 ((pci_power_t __force) 2) */
+ /* #define PCI_D3hot ((pci_power_t __force) 3) */
+ /* #define PCI_D3cold ((pci_power_t __force) 4) */
+ /* #define PCI_UNKNOWN ((pci_power_t __force) 5) */
+ /* #define PCI_POWER_ERROR ((pci_power_t __force) -1) */
retval = pci_set_power_state(pci_dev, PCI_D0);
- // restore the saved state of a PCI device
+ /* restore the saved state of a PCI device */
pci_restore_state(pci_dev);
- // initialize device before it's used by a driver
+ /* initialize device before it's used by a driver */
if (pci_enable_device(pci_dev)) {
printk("pci enable fail!\n");
return 0;
@@ -220,16 +220,16 @@ static int rt2860_resume(struct pci_dev *pci_dev)
/* and 1 suspend/resume function for 1 module, not for each interface */
/* so Linux will call suspend/resume function once */
if (VIRTUAL_IF_NUM(pAd) > 0) {
- // mark device as attached from system and restart if needed
+ /* mark device as attached from system and restart if needed */
netif_device_attach(net_dev);
if (rt28xx_open((PNET_DEV) net_dev) != 0) {
- // open fail
+ /* open fail */
DBGPRINT(RT_DEBUG_TRACE,
("<=== rt2860_resume()\n"));
return 0;
}
- // increase MODULE use count
+ /* increase MODULE use count */
RT_MOD_INC_USE_COUNT();
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS);
@@ -244,16 +244,16 @@ static int rt2860_resume(struct pci_dev *pci_dev)
DBGPRINT(RT_DEBUG_TRACE, ("<=== rt2860_resume()\n"));
return 0;
}
-#endif // CONFIG_PM //
+#endif /* CONFIG_PM // */
static INT __init rt2860_init_module(VOID)
{
return pci_register_driver(&rt2860_driver);
}
-//
-// Driver module unload function
-//
+/* */
+/* Driver module unload function */
+/* */
static VOID __exit rt2860_cleanup_module(VOID)
{
pci_unregister_driver(&rt2860_driver);
@@ -262,9 +262,9 @@ static VOID __exit rt2860_cleanup_module(VOID)
module_init(rt2860_init_module);
module_exit(rt2860_cleanup_module);
-//
-// PCI device probe & initialization function
-//
+/* */
+/* PCI device probe & initialization function */
+/* */
static INT __devinit rt2860_probe(IN struct pci_dev *pci_dev,
IN const struct pci_device_id *pci_id)
{
@@ -278,8 +278,8 @@ static INT __devinit rt2860_probe(IN struct pci_dev *pci_dev,
DBGPRINT(RT_DEBUG_TRACE, ("===> rt2860_probe\n"));
-//PCIDevInit==============================================
- // wake up and enable device
+/*PCIDevInit============================================== */
+ /* wake up and enable device */
if ((rv = pci_enable_device(pci_dev)) != 0) {
DBGPRINT(RT_DEBUG_ERROR,
("Enable PCI device failed, errno=%d!\n", rv));
@@ -293,7 +293,7 @@ static INT __devinit rt2860_probe(IN struct pci_dev *pci_dev,
("Request PCI resource failed, errno=%d!\n", rv));
goto err_out;
}
- // map physical address to virtual address for accessing register
+ /* map physical address to virtual address for accessing register */
csr_addr =
(unsigned long)ioremap(pci_resource_start(pci_dev, 0),
pci_resource_len(pci_dev, 0));
@@ -310,11 +310,11 @@ static INT __devinit rt2860_probe(IN struct pci_dev *pci_dev,
(ULONG) csr_addr, pci_dev->irq));
}
- // Set DMA master
+ /* Set DMA master */
pci_set_master(pci_dev);
-//RtmpDevInit==============================================
- // Allocate RTMP_ADAPTER adapter structure
+/*RtmpDevInit============================================== */
+ /* Allocate RTMP_ADAPTER adapter structure */
handle = kmalloc(sizeof(struct os_cookie), GFP_KERNEL);
if (handle == NULL) {
DBGPRINT(RT_DEBUG_ERROR,
@@ -325,25 +325,25 @@ static INT __devinit rt2860_probe(IN struct pci_dev *pci_dev,
((POS_COOKIE) handle)->pci_dev = pci_dev;
- rv = RTMPAllocAdapterBlock(handle, &pAd); //shiang: we may need the pci_dev for allocate structure of "RTMP_ADAPTER"
+ rv = RTMPAllocAdapterBlock(handle, &pAd); /*shiang: we may need the pci_dev for allocate structure of "RTMP_ADAPTER" */
if (rv != NDIS_STATUS_SUCCESS)
goto err_out_iounmap;
- // Here are the RTMP_ADAPTER structure with pci-bus specific parameters.
+ /* Here are the RTMP_ADAPTER structure with pci-bus specific parameters. */
pAd->CSRBaseAddress = (PUCHAR) csr_addr;
DBGPRINT(RT_DEBUG_ERROR,
("pAd->CSRBaseAddress =0x%lx, csr_addr=0x%lx!\n",
(ULONG) pAd->CSRBaseAddress, csr_addr));
RtmpRaDevCtrlInit(pAd, RTMP_DEV_INF_PCI);
-//NetDevInit==============================================
+/*NetDevInit============================================== */
net_dev = RtmpPhyNetDevInit(pAd, &netDevHook);
if (net_dev == NULL)
goto err_out_free_radev;
- // Here are the net_device structure with pci-bus specific parameters.
- net_dev->irq = pci_dev->irq; // Interrupt IRQ number
- net_dev->base_addr = csr_addr; // Save CSR virtual address and irq to device structure
- pci_set_drvdata(pci_dev, net_dev); // Set driver data
+ /* Here are the net_device structure with pci-bus specific parameters. */
+ net_dev->irq = pci_dev->irq; /* Interrupt IRQ number */
+ net_dev->base_addr = csr_addr; /* Save CSR virtual address and irq to device structure */
+ pci_set_drvdata(pci_dev, net_dev); /* Set driver data */
/* for supporting Network Manager */
/* Set the sysfs physical device reference for the network logical device
@@ -351,8 +351,8 @@ static INT __devinit rt2860_probe(IN struct pci_dev *pci_dev,
*/
SET_NETDEV_DEV(net_dev, &(pci_dev->dev));
-//All done, it's time to register the net device to linux kernel.
- // Register this device
+/*All done, it's time to register the net device to linux kernel. */
+ /* Register this device */
rv = RtmpOSNetDevAttach(net_dev, &netDevHook);
if (rv)
goto err_out_free_netdev;
@@ -362,7 +362,7 @@ static INT __devinit rt2860_probe(IN struct pci_dev *pci_dev,
DBGPRINT(RT_DEBUG_TRACE, ("<=== rt2860_probe\n"));
- return 0; // probe ok
+ return 0; /* probe ok */
/* --------------------------- ERROR HANDLE --------------------------- */
err_out_free_netdev:
@@ -393,39 +393,39 @@ static VOID __devexit rt2860_remove_one(IN struct pci_dev *pci_dev)
{
PNET_DEV net_dev = pci_get_drvdata(pci_dev);
RTMP_ADAPTER *pAd = NULL;
- ULONG csr_addr = net_dev->base_addr; // pAd->CSRBaseAddress;
+ ULONG csr_addr = net_dev->base_addr; /* pAd->CSRBaseAddress; */
GET_PAD_FROM_NET_DEV(pAd, net_dev);
DBGPRINT(RT_DEBUG_TRACE, ("===> rt2860_remove_one\n"));
if (pAd != NULL) {
- // Unregister/Free all allocated net_device.
+ /* Unregister/Free all allocated net_device. */
RtmpPhyNetDevExit(pAd, net_dev);
- // Unmap CSR base address
+ /* Unmap CSR base address */
iounmap((char *)(csr_addr));
- // release memory region
+ /* release memory region */
release_mem_region(pci_resource_start(pci_dev, 0),
pci_resource_len(pci_dev, 0));
- // Free RTMP_ADAPTER related structures.
+ /* Free RTMP_ADAPTER related structures. */
RtmpRaDevCtrlExit(pAd);
} else {
- // Unregister network device
+ /* Unregister network device */
RtmpOSNetDevDetach(net_dev);
- // Unmap CSR base address
+ /* Unmap CSR base address */
iounmap((char *)(net_dev->base_addr));
- // release memory region
+ /* release memory region */
release_mem_region(pci_resource_start(pci_dev, 0),
pci_resource_len(pci_dev, 0));
}
- // Free the root net_device
+ /* Free the root net_device */
RtmpOSNetDevFree(net_dev);
}
@@ -475,7 +475,7 @@ static VOID RTMPInitPCIeDevice(IN struct pci_dev *pci_dev, IN PRTMP_ADAPTER pAd)
(device_id == NIC3090_PCIe_DEVICE_ID) ||
(device_id == NIC3091_PCIe_DEVICE_ID) ||
(device_id == NIC3092_PCIe_DEVICE_ID) ||
-#endif // RT3090 //
+#endif /* RT3090 // */
0) {
UINT32 MacCsr0 = 0, Index = 0;
do {
@@ -487,8 +487,8 @@ static VOID RTMPInitPCIeDevice(IN struct pci_dev *pci_dev, IN PRTMP_ADAPTER pAd)
RTMPusecDelay(10);
} while (Index++ < 100);
- // Support advanced power save after 2892/2790.
- // MAC version at offset 0x1000 is 0x2872XXXX/0x2870XXXX(PCIe, USB, SDIO).
+ /* Support advanced power save after 2892/2790. */
+ /* MAC version at offset 0x1000 is 0x2872XXXX/0x2870XXXX(PCIe, USB, SDIO). */
if ((MacCsr0 & 0xffff0000) != 0x28600000) {
OPSTATUS_SET_FLAG(pAd, fOP_STATUS_PCIE_DEVICE);
}
@@ -509,7 +509,7 @@ VOID RTMPInitPCIeLinkCtrlValue(IN PRTMP_ADAPTER pAd)
return;
DBGPRINT(RT_DEBUG_TRACE, ("%s.===>\n", __func__));
- // Init EEPROM, and save settings
+ /* Init EEPROM, and save settings */
if (!(IS_RT3090(pAd) || IS_RT3572(pAd) || IS_RT3390(pAd))) {
RT28xx_EEPROM_READ16(pAd, 0x22, PCIePowerSaveLevel);
pAd->PCIePowerSaveLevel = PCIePowerSaveLevel & 0xff;
@@ -541,16 +541,16 @@ VOID RTMPInitPCIeLinkCtrlValue(IN PRTMP_ADAPTER pAd)
PCIePowerSaveLevel &= 0xff;
PCIePowerSaveLevel = PCIePowerSaveLevel >> 6;
switch (PCIePowerSaveLevel) {
- case 0: // Only support L0
+ case 0: /* Only support L0 */
pAd->LnkCtrlBitMask = 0;
break;
- case 1: // Only enable L0s
+ case 1: /* Only enable L0s */
pAd->LnkCtrlBitMask = 1;
break;
- case 2: // enable L1, L0s
+ case 2: /* enable L1, L0s */
pAd->LnkCtrlBitMask = 3;
break;
- case 3: // sync with host clk and enable L1, L0s
+ case 3: /* sync with host clk and enable L1, L0s */
pAd->LnkCtrlBitMask = 0x103;
break;
}
@@ -580,7 +580,7 @@ VOID RTMPInitPCIeLinkCtrlValue(IN PRTMP_ADAPTER pAd)
} else if (IS_RT3090(pAd) || IS_RT3572(pAd) || IS_RT3390(pAd)) {
UCHAR LinkCtrlSetting = 0;
- // Check 3090E special setting chip.
+ /* Check 3090E special setting chip. */
RT28xx_EEPROM_READ16(pAd, 0x24, data2);
if ((data2 == 0x9280) && ((pAd->MACVersion & 0xffff) == 0x0211)) {
pAd->b3090ESpecialChip = TRUE;
@@ -588,37 +588,37 @@ VOID RTMPInitPCIeLinkCtrlValue(IN PRTMP_ADAPTER pAd)
}
RTMP_IO_READ32(pAd, AUX_CTRL, &MacValue);
- //enable WAKE_PCIE function, which forces to enable PCIE clock when mpu interrupt asserting.
- //Force PCIE 125MHz CLK to toggle
+ /*enable WAKE_PCIE function, which forces to enable PCIE clock when mpu interrupt asserting. */
+ /*Force PCIE 125MHz CLK to toggle */
MacValue |= 0x402;
RTMP_IO_WRITE32(pAd, AUX_CTRL, MacValue);
DBGPRINT_RAW(RT_DEBUG_ERROR,
(" AUX_CTRL = 0x%32x\n", MacValue));
- // for RT30xx F and after, PCIe infterface, and for power solution 3
+ /* for RT30xx F and after, PCIe infterface, and for power solution 3 */
if ((IS_VERSION_AFTER_F(pAd))
&& (pAd->StaCfg.PSControl.field.rt30xxPowerMode >= 2)
&& (pAd->StaCfg.PSControl.field.rt30xxPowerMode <= 3)) {
RTMP_IO_READ32(pAd, AUX_CTRL, &MacValue);
DBGPRINT_RAW(RT_DEBUG_ERROR,
(" Read AUX_CTRL = 0x%x\n", MacValue));
- // turn on bit 12.
- //enable 32KHz clock mode for power saving
+ /* turn on bit 12. */
+ /*enable 32KHz clock mode for power saving */
MacValue |= 0x1000;
if (MacValue != 0xffffffff) {
RTMP_IO_WRITE32(pAd, AUX_CTRL, MacValue);
DBGPRINT_RAW(RT_DEBUG_ERROR,
(" Write AUX_CTRL = 0x%x\n",
MacValue));
- // 1. if use PCIePowerSetting is 2 or 3, need to program OSC_CTRL to 0x3ff11.
+ /* 1. if use PCIePowerSetting is 2 or 3, need to program OSC_CTRL to 0x3ff11. */
MacValue = 0x3ff11;
RTMP_IO_WRITE32(pAd, OSC_CTRL, MacValue);
DBGPRINT_RAW(RT_DEBUG_ERROR,
(" OSC_CTRL = 0x%x\n", MacValue));
- // 2. Write PCI register Clk ref bit
+ /* 2. Write PCI register Clk ref bit */
RTMPrt3xSetPCIePowerLinkCtrl(pAd);
} else {
- // Error read Aux_Ctrl value. Force to use solution 1
+ /* Error read Aux_Ctrl value. Force to use solution 1 */
DBGPRINT(RT_DEBUG_ERROR,
(" Error Value in AUX_CTRL = 0x%x\n",
MacValue));
@@ -627,20 +627,20 @@ VOID RTMPInitPCIeLinkCtrlValue(IN PRTMP_ADAPTER pAd)
(" Force to use power solution1 \n"));
}
}
- // 1. read setting from inf file.
+ /* 1. read setting from inf file. */
PCIePowerSaveLevel =
(USHORT) pAd->StaCfg.PSControl.field.rt30xxPowerMode;
DBGPRINT(RT_DEBUG_ERROR,
("====> rt30xx Read PowerLevelMode = 0x%x.\n",
PCIePowerSaveLevel));
- // 2. Check EnableNewPS.
+ /* 2. Check EnableNewPS. */
if (pAd->StaCfg.PSControl.field.EnableNewPS == FALSE)
PCIePowerSaveLevel = 1;
if (IS_VERSION_BEFORE_F(pAd)
&& (pAd->b3090ESpecialChip == FALSE)) {
- // Chip Version E only allow 1, So force set 1.
+ /* Chip Version E only allow 1, So force set 1. */
PCIePowerSaveLevel &= 0x1;
pAd->PCIePowerSaveLevel = (USHORT) PCIePowerSaveLevel;
DBGPRINT(RT_DEBUG_TRACE,
@@ -650,7 +650,7 @@ VOID RTMPInitPCIeLinkCtrlValue(IN PRTMP_ADAPTER pAd)
AsicSendCommandToMcu(pAd, 0x83, 0xff,
(UCHAR) PCIePowerSaveLevel, 0x00);
} else {
- // Chip Version F and after only allow 1 or 2 or 3. This might be modified after new chip version come out.
+ /* Chip Version F and after only allow 1 or 2 or 3. This might be modified after new chip version come out. */
if (!
((PCIePowerSaveLevel == 1)
|| (PCIePowerSaveLevel == 3)))
@@ -659,8 +659,8 @@ VOID RTMPInitPCIeLinkCtrlValue(IN PRTMP_ADAPTER pAd)
("====> rt30xx F Write 0x83 Command = 0x%x.\n",
PCIePowerSaveLevel));
pAd->PCIePowerSaveLevel = (USHORT) PCIePowerSaveLevel;
- // for 3090F , we need to add high-byte arg for 0x83 command to indicate the link control setting in
- // PCI Configuration Space. Because firmware can't read PCI Configuration Space
+ /* for 3090F , we need to add high-byte arg for 0x83 command to indicate the link control setting in */
+ /* PCI Configuration Space. Because firmware can't read PCI Configuration Space */
if ((pAd->Rt3xxRalinkLinkCtrl & 0x2)
&& (pAd->Rt3xxHostLinkCtrl & 0x2)) {
LinkCtrlSetting = 1;
@@ -673,11 +673,11 @@ VOID RTMPInitPCIeLinkCtrlValue(IN PRTMP_ADAPTER pAd)
LinkCtrlSetting);
}
}
- // Find Ralink PCIe Device's Express Capability Offset
+ /* Find Ralink PCIe Device's Express Capability Offset */
pos = pci_find_capability(pObj->pci_dev, PCI_CAP_ID_EXP);
if (pos != 0) {
- // Ralink PCIe Device's Link Control Register Offset
+ /* Ralink PCIe Device's Link Control Register Offset */
pAd->RLnkCtrlOffset = pos + PCI_EXP_LNKCTL;
pci_read_config_word(pObj->pci_dev, pAd->RLnkCtrlOffset,
®16);
@@ -698,7 +698,7 @@ VOID RTMPInitPCIeLinkCtrlValue(IN PRTMP_ADAPTER pAd)
("Write (Ralink PCIe Link Control Register) offset 0x%x = 0x%x\n",
pos + PCI_EXP_LNKCTL, Configuration));
}
-#endif // RT2860 //
+#endif /* RT2860 // */
RTMPFindHostPCIDev(pAd);
if (pObj->parent_pci_dev) {
@@ -711,14 +711,14 @@ VOID RTMPInitPCIeLinkCtrlValue(IN PRTMP_ADAPTER pAd)
bFindIntel = TRUE;
RTMP_SET_PSFLAG(pAd, fRTMP_PS_TOGGLE_L1);
}
- // Find PCI-to-PCI Bridge Express Capability Offset
+ /* Find PCI-to-PCI Bridge Express Capability Offset */
pos =
pci_find_capability(pObj->parent_pci_dev,
PCI_CAP_ID_EXP);
if (pos != 0) {
BOOLEAN bChange = FALSE;
- // PCI-to-PCI Bridge Link Control Register Offset
+ /* PCI-to-PCI Bridge Link Control Register Offset */
pAd->HostLnkCtrlOffset = pos + PCI_EXP_LNKCTL;
pci_read_config_word(pObj->parent_pci_dev,
pAd->HostLnkCtrlOffset,
@@ -739,7 +739,7 @@ VOID RTMPInitPCIeLinkCtrlValue(IN PRTMP_ADAPTER pAd)
case NIC2790_PCIe_DEVICE_ID:
bChange = TRUE;
break;
-#endif // RT2860 //
+#endif /* RT2860 // */
#ifdef RT3090
case NIC3090_PCIe_DEVICE_ID:
case NIC3091_PCIe_DEVICE_ID:
@@ -747,7 +747,7 @@ VOID RTMPInitPCIeLinkCtrlValue(IN PRTMP_ADAPTER pAd)
if (bFindIntel == FALSE)
bChange = TRUE;
break;
-#endif // RT3090 //
+#endif /* RT3090 // */
default:
break;
}
@@ -782,14 +782,14 @@ VOID RTMPInitPCIeLinkCtrlValue(IN PRTMP_ADAPTER pAd)
if (bFindIntel == FALSE) {
DBGPRINT(RT_DEBUG_TRACE,
("Doesn't find Intel PCI host controller. \n"));
- // Doesn't switch L0, L1, So set PCIePowerSaveLevel to 0xff
+ /* Doesn't switch L0, L1, So set PCIePowerSaveLevel to 0xff */
pAd->PCIePowerSaveLevel = 0xff;
if ((pAd->RLnkCtrlOffset != 0)
#ifdef RT3090
&& ((pObj->DeviceID == NIC3090_PCIe_DEVICE_ID)
|| (pObj->DeviceID == NIC3091_PCIe_DEVICE_ID)
|| (pObj->DeviceID == NIC3092_PCIe_DEVICE_ID))
-#endif // RT3090 //
+#endif /* RT3090 // */
) {
pci_read_config_word(pObj->pci_dev, pAd->RLnkCtrlOffset,
®16);
@@ -871,20 +871,20 @@ VOID RTMPPCIeLinkCtrlValueRestore(IN PRTMP_ADAPTER pAd, IN UCHAR Level)
if (!((pObj->DeviceID == NIC2860_PCIe_DEVICE_ID)
|| (pObj->DeviceID == NIC2790_PCIe_DEVICE_ID)))
return;
-#endif // RT2860 //
- // Check PSControl Configuration
+#endif /* RT2860 // */
+ /* Check PSControl Configuration */
if (pAd->StaCfg.PSControl.field.EnableNewPS == FALSE)
return;
- //3090 will not execute the following codes.
- // Check interface : If not PCIe interface, return.
+ /*3090 will not execute the following codes. */
+ /* Check interface : If not PCIe interface, return. */
#ifdef RT3090
if ((pObj->DeviceID == NIC3090_PCIe_DEVICE_ID)
|| (pObj->DeviceID == NIC3091_PCIe_DEVICE_ID)
|| (pObj->DeviceID == NIC3092_PCIe_DEVICE_ID))
return;
-#endif // RT3090 //
+#endif /* RT3090 // */
DBGPRINT(RT_DEBUG_TRACE, ("%s.===>\n", __func__));
PCIePowerSaveLevel = pAd->PCIePowerSaveLevel;
@@ -898,7 +898,7 @@ VOID RTMPPCIeLinkCtrlValueRestore(IN PRTMP_ADAPTER pAd, IN UCHAR Level)
Configuration);
if ((Configuration != 0) && (Configuration != 0xFFFF)) {
Configuration &= 0xfefc;
- // If call from interface down, restore to orginial setting.
+ /* If call from interface down, restore to orginial setting. */
if (Level == RESTORE_CLOSE) {
Configuration |= pAd->HostLnkCtrlConfiguration;
} else
@@ -920,7 +920,7 @@ VOID RTMPPCIeLinkCtrlValueRestore(IN PRTMP_ADAPTER pAd, IN UCHAR Level)
Configuration);
if ((Configuration != 0) && (Configuration != 0xFFFF)) {
Configuration &= 0xfefc;
- // If call from interface down, restore to orginial setting.
+ /* If call from interface down, restore to orginial setting. */
if (Level == RESTORE_CLOSE)
Configuration |= pAd->RLnkCtrlConfiguration;
else
@@ -965,20 +965,20 @@ VOID RTMPPCIeLinkCtrlSetting(IN PRTMP_ADAPTER pAd, IN USHORT Max)
if (!((pObj->DeviceID == NIC2860_PCIe_DEVICE_ID)
|| (pObj->DeviceID == NIC2790_PCIe_DEVICE_ID)))
return;
-#endif // RT2860 //
- // Check PSControl Configuration
+#endif /* RT2860 // */
+ /* Check PSControl Configuration */
if (pAd->StaCfg.PSControl.field.EnableNewPS == FALSE)
return;
- // Check interface : If not PCIe interface, return.
- //Block 3090 to enter the following function
+ /* Check interface : If not PCIe interface, return. */
+ /*Block 3090 to enter the following function */
#ifdef RT3090
if ((pObj->DeviceID == NIC3090_PCIe_DEVICE_ID)
|| (pObj->DeviceID == NIC3091_PCIe_DEVICE_ID)
|| (pObj->DeviceID == NIC3092_PCIe_DEVICE_ID))
return;
-#endif // RT3090 //
+#endif /* RT3090 // */
if (!RTMP_TEST_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP)) {
DBGPRINT(RT_DEBUG_INFO,
("RTMPPCIePowerLinkCtrl return on fRTMP_PS_CAN_GO_SLEEP flag\n"));
@@ -993,27 +993,27 @@ VOID RTMPPCIeLinkCtrlSetting(IN PRTMP_ADAPTER pAd, IN USHORT Max)
}
PCIePowerSaveLevel = PCIePowerSaveLevel >> 6;
- // Skip non-exist deice right away
+ /* Skip non-exist deice right away */
if (pObj->parent_pci_dev && (pAd->HostLnkCtrlOffset != 0)) {
PCI_REG_READ_WORD(pObj->parent_pci_dev, pAd->HostLnkCtrlOffset,
Configuration);
switch (PCIePowerSaveLevel) {
case 0:
- // Set b0 and b1 of LinkControl (both 2892 and PCIe bridge) to 00
+ /* Set b0 and b1 of LinkControl (both 2892 and PCIe bridge) to 00 */
Configuration &= 0xfefc;
break;
case 1:
- // Set b0 and b1 of LinkControl (both 2892 and PCIe bridge) to 01
+ /* Set b0 and b1 of LinkControl (both 2892 and PCIe bridge) to 01 */
Configuration &= 0xfefc;
Configuration |= 0x1;
break;
case 2:
- // Set b0 and b1 of LinkControl (both 2892 and PCIe bridge) to 11
+ /* Set b0 and b1 of LinkControl (both 2892 and PCIe bridge) to 11 */
Configuration &= 0xfefc;
Configuration |= 0x3;
break;
case 3:
- // Set b0 and b1 of LinkControl (both 2892 and PCIe bridge) to 11 and bit 8 of LinkControl of 2892 to 1
+ /* Set b0 and b1 of LinkControl (both 2892 and PCIe bridge) to 11 and bit 8 of LinkControl of 2892 to 1 */
Configuration &= 0xfefc;
Configuration |= 0x103;
break;
@@ -1026,7 +1026,7 @@ VOID RTMPPCIeLinkCtrlSetting(IN PRTMP_ADAPTER pAd, IN USHORT Max)
}
if (pObj->pci_dev && (pAd->RLnkCtrlOffset != 0)) {
- // first 2892 chip not allow to frequently set mode 3. will cause hang problem.
+ /* first 2892 chip not allow to frequently set mode 3. will cause hang problem. */
if (PCIePowerSaveLevel > Max)
PCIePowerSaveLevel = Max;
@@ -1034,25 +1034,25 @@ VOID RTMPPCIeLinkCtrlSetting(IN PRTMP_ADAPTER pAd, IN USHORT Max)
Configuration);
switch (PCIePowerSaveLevel) {
case 0:
- // No PCI power safe
- // Set b0 and b1 of LinkControl (both 2892 and PCIe bridge) to 00 .
+ /* No PCI power safe */
+ /* Set b0 and b1 of LinkControl (both 2892 and PCIe bridge) to 00 . */
Configuration &= 0xfefc;
break;
case 1:
- // L0
- // Set b0 and b1 of LinkControl (both 2892 and PCIe bridge) to 01 .
+ /* L0 */
+ /* Set b0 and b1 of LinkControl (both 2892 and PCIe bridge) to 01 . */
Configuration &= 0xfefc;
Configuration |= 0x1;
break;
case 2:
- // L0 and L1
- // Set b0 and b1 of LinkControl (both 2892 and PCIe bridge) to 11
+ /* L0 and L1 */
+ /* Set b0 and b1 of LinkControl (both 2892 and PCIe bridge) to 11 */
Configuration &= 0xfefc;
Configuration |= 0x3;
break;
case 3:
- // L0 , L1 and clock management.
- // Set b0 and b1 of LinkControl (both 2892 and PCIe bridge) to 11 and bit 8 of LinkControl of 2892 to 1
+ /* L0 , L1 and clock management. */
+ /* Set b0 and b1 of LinkControl (both 2892 and PCIe bridge) to 11 and bit 8 of LinkControl of 2892 to 1 */
Configuration &= 0xfefc;
Configuration |= 0x103;
pAd->bPCIclkOff = TRUE;
@@ -1091,35 +1091,35 @@ VOID RTMPrt3xSetPCIePowerLinkCtrl(IN PRTMP_ADAPTER pAd)
("RTMPrt3xSetPCIePowerLinkCtrl.===> %lx\n",
pAd->StaCfg.PSControl.word));
- // Check PSControl Configuration
+ /* Check PSControl Configuration */
if (pAd->StaCfg.PSControl.field.EnableNewPS == FALSE)
return;
RTMPFindHostPCIDev(pAd);
if (pObj->parent_pci_dev) {
- // Find PCI-to-PCI Bridge Express Capability Offset
+ /* Find PCI-to-PCI Bridge Express Capability Offset */
pos = pci_find_capability(pObj->parent_pci_dev, PCI_CAP_ID_EXP);
if (pos != 0) {
pAd->HostLnkCtrlOffset = pos + PCI_EXP_LNKCTL;
}
- // If configurared to turn on L1.
+ /* If configurared to turn on L1. */
HostConfiguration = 0;
if (pAd->StaCfg.PSControl.field.rt30xxForceASPMTest == 1) {
DBGPRINT(RT_DEBUG_TRACE, ("Enter,PSM : Force ASPM \n"));
- // Skip non-exist deice right away
+ /* Skip non-exist deice right away */
if ((pAd->HostLnkCtrlOffset != 0)) {
PCI_REG_READ_WORD(pObj->parent_pci_dev,
pAd->HostLnkCtrlOffset,
HostConfiguration);
- // Prepare Configuration to write to Host
+ /* Prepare Configuration to write to Host */
HostConfiguration |= 0x3;
PCI_REG_WIRTE_WORD(pObj->parent_pci_dev,
pAd->HostLnkCtrlOffset,
HostConfiguration);
pAd->Rt3xxHostLinkCtrl = HostConfiguration;
- // Because in rt30xxForceASPMTest Mode, Force turn on L0s, L1.
- // Fix HostConfiguration bit0:1 = 0x3 for later use.
+ /* Because in rt30xxForceASPMTest Mode, Force turn on L0s, L1. */
+ /* Fix HostConfiguration bit0:1 = 0x3 for later use. */
HostConfiguration = 0x3;
DBGPRINT(RT_DEBUG_TRACE,
("PSM : Force ASPM : "
@@ -1129,7 +1129,7 @@ VOID RTMPrt3xSetPCIePowerLinkCtrl(IN PRTMP_ADAPTER pAd)
} else if (pAd->StaCfg.PSControl.field.rt30xxFollowHostASPM ==
1) {
- // Skip non-exist deice right away
+ /* Skip non-exist deice right away */
if ((pAd->HostLnkCtrlOffset != 0)) {
PCI_REG_READ_WORD(pObj->parent_pci_dev,
pAd->HostLnkCtrlOffset,
@@ -1143,12 +1143,12 @@ VOID RTMPrt3xSetPCIePowerLinkCtrl(IN PRTMP_ADAPTER pAd)
}
}
}
- // Prepare to write Ralink setting.
- // Find Ralink PCIe Device's Express Capability Offset
+ /* Prepare to write Ralink setting. */
+ /* Find Ralink PCIe Device's Express Capability Offset */
pos = pci_find_capability(pObj->pci_dev, PCI_CAP_ID_EXP);
if (pos != 0) {
- // Ralink PCIe Device's Link Control Register Offset
+ /* Ralink PCIe Device's Link Control Register Offset */
pAd->RLnkCtrlOffset = pos + PCI_EXP_LNKCTL;
pci_read_config_word(pObj->pci_dev, pAd->RLnkCtrlOffset,
®16);
diff --git a/drivers/staging/rt2860/rt_linux.c b/drivers/staging/rt2860/rt_linux.c
index fd577e0..8413998 100644
--- a/drivers/staging/rt2860/rt_linux.c
+++ b/drivers/staging/rt2860/rt_linux.c
@@ -30,9 +30,9 @@
ULONG RTDebugLevel = RT_DEBUG_ERROR;
-// for wireless system event message
+/* for wireless system event message */
char const *pWirelessSysEventText[IW_SYS_EVENT_TYPE_NUM] = {
- // system status event
+ /* system status event */
"had associated successfully", /* IW_ASSOC_EVENT_FLAG */
"had disassociated", /* IW_DISASSOC_EVENT_FLAG */
"had deauthenticated", /* IW_DEAUTH_EVENT_FLAG */
@@ -54,7 +54,7 @@ char const *pWirelessSysEventText[IW_SYS_EVENT_TYPE_NUM] = {
"scan terminate!! Busy!! Enqueue fail!!" /* IW_SCAN_ENQUEUE_FAIL_EVENT_FLAG */
};
-// for wireless IDS_spoof_attack event message
+/* for wireless IDS_spoof_attack event message */
char const *pWirelessSpoofEventText[IW_SPOOF_EVENT_TYPE_NUM] = {
"detected conflict SSID", /* IW_CONFLICT_SSID_EVENT_FLAG */
"detected spoofed association response", /* IW_SPOOF_ASSOC_RESP_EVENT_FLAG */
@@ -68,7 +68,7 @@ char const *pWirelessSpoofEventText[IW_SPOOF_EVENT_TYPE_NUM] = {
"detected replay attack" /* IW_REPLAY_ATTACK_EVENT_FLAG */
};
-// for wireless IDS_flooding_attack event message
+/* for wireless IDS_flooding_attack event message */
char const *pWirelessFloodEventText[IW_FLOOD_EVENT_TYPE_NUM] = {
"detected authentication flooding", /* IW_FLOOD_AUTH_EVENT_FLAG */
"detected association request flooding", /* IW_FLOOD_ASSOC_REQ_EVENT_FLAG */
@@ -129,10 +129,10 @@ VOID RTMP_OS_Del_Timer(IN NDIS_MINIPORT_TIMER * pTimer,
VOID RTMP_OS_Release_Packet(IN PRTMP_ADAPTER pAd, IN PQUEUE_ENTRY pEntry)
{
- //RTMPFreeNdisPacket(pAd, (struct sk_buff *)pEntry);
+ /*RTMPFreeNdisPacket(pAd, (struct sk_buff *)pEntry); */
}
-// Unify all delay routine by using udelay
+/* Unify all delay routine by using udelay */
VOID RTMPusecDelay(IN ULONG usec)
{
ULONG i;
@@ -149,7 +149,7 @@ void RTMP_GetCurrentSystemTime(LARGE_INTEGER * time)
time->u.LowPart = jiffies;
}
-// pAd MUST allow to be NULL
+/* pAd MUST allow to be NULL */
NDIS_STATUS os_alloc_mem(IN RTMP_ADAPTER * pAd, OUT UCHAR ** mem, IN ULONG size)
{
*mem = (PUCHAR) kmalloc(size, GFP_ATOMIC);
@@ -159,7 +159,7 @@ NDIS_STATUS os_alloc_mem(IN RTMP_ADAPTER * pAd, OUT UCHAR ** mem, IN ULONG size)
return (NDIS_STATUS_FAILURE);
}
-// pAd MUST allow to be NULL
+/* pAd MUST allow to be NULL */
NDIS_STATUS os_free_mem(IN PRTMP_ADAPTER pAd, IN PVOID mem)
{
@@ -249,8 +249,8 @@ VOID RTMPFreeAdapter(IN PRTMP_ADAPTER pAd)
NdisFreeSpinLock(&pAd->RxRingLock);
#ifdef RT3090
NdisFreeSpinLock(&pAd->McuCmdLock);
-#endif // RT3090 //
-#endif // RTMP_MAC_PCI //
+#endif /* RT3090 // */
+#endif /* RTMP_MAC_PCI // */
for (index = 0; index < NUM_OF_TX_RING; index++) {
NdisFreeSpinLock(&pAd->TxSwQueueLock[index]);
@@ -260,7 +260,7 @@ VOID RTMPFreeAdapter(IN PRTMP_ADAPTER pAd)
NdisFreeSpinLock(&pAd->irq_lock);
- vfree(pAd); // pci_free_consistent(os_cookie->pci_dev,sizeof(RTMP_ADAPTER),pAd,os_cookie->pAd_pa);
+ vfree(pAd); /* pci_free_consistent(os_cookie->pci_dev,sizeof(RTMP_ADAPTER),pAd,os_cookie->pAd_pa); */
if (os_cookie)
kfree(os_cookie);
}
@@ -303,7 +303,7 @@ NDIS_STATUS RTMPCloneNdisPacket(IN PRTMP_ADAPTER pAd,
ASSERT(pInPacket);
ASSERT(ppOutPacket);
- // 1. Allocate a packet
+ /* 1. Allocate a packet */
pkt = dev_alloc_skb(2048);
if (pkt == NULL) {
@@ -322,7 +322,7 @@ NDIS_STATUS RTMPCloneNdisPacket(IN PRTMP_ADAPTER pAd,
return NDIS_STATUS_SUCCESS;
}
-// the allocated NDIS PACKET must be freed via RTMPFreeNdisPacket()
+/* the allocated NDIS PACKET must be freed via RTMPFreeNdisPacket() */
NDIS_STATUS RTMPAllocateNdisPacket(IN PRTMP_ADAPTER pAd,
OUT PNDIS_PACKET * ppPacket,
IN PUCHAR pHeader,
@@ -333,7 +333,7 @@ NDIS_STATUS RTMPAllocateNdisPacket(IN PRTMP_ADAPTER pAd,
ASSERT(pData);
ASSERT(DataLen);
- // 1. Allocate a packet
+ /* 1. Allocate a packet */
pPacket =
(PNDIS_PACKET *) dev_alloc_skb(HeaderLen + DataLen +
RTMP_PKT_TAIL_PADDING);
@@ -344,18 +344,18 @@ NDIS_STATUS RTMPAllocateNdisPacket(IN PRTMP_ADAPTER pAd,
#endif
return NDIS_STATUS_FAILURE;
}
- // 2. clone the frame content
+ /* 2. clone the frame content */
if (HeaderLen > 0)
NdisMoveMemory(GET_OS_PKT_DATAPTR(pPacket), pHeader, HeaderLen);
if (DataLen > 0)
NdisMoveMemory(GET_OS_PKT_DATAPTR(pPacket) + HeaderLen, pData,
DataLen);
- // 3. update length of packet
+ /* 3. update length of packet */
skb_put(GET_OS_PKT_TYPE(pPacket), HeaderLen + DataLen);
RTMP_SET_PACKET_SOURCE(pPacket, PKTSRC_NDIS);
-// printk("%s : pPacket = %p, len = %d\n", __func__, pPacket, GET_OS_PKT_LEN(pPacket));
+/* printk("%s : pPacket = %p, len = %d\n", __func__, pPacket, GET_OS_PKT_LEN(pPacket)); */
*ppPacket = pPacket;
return NDIS_STATUS_SUCCESS;
}
@@ -372,9 +372,9 @@ VOID RTMPFreeNdisPacket(IN PRTMP_ADAPTER pAd, IN PNDIS_PACKET pPacket)
dev_kfree_skb_any(RTPKT_TO_OSPKT(pPacket));
}
-// IRQL = DISPATCH_LEVEL
-// NOTE: we do have an assumption here, that Byte0 and Byte1 always reasid at the same
-// scatter gather buffer
+/* IRQL = DISPATCH_LEVEL */
+/* NOTE: we do have an assumption here, that Byte0 and Byte1 always reasid at the same */
+/* scatter gather buffer */
NDIS_STATUS Sniff2BytesFromNdisBuffer(IN PNDIS_BUFFER pFirstBuffer,
IN UCHAR DesiredOffset,
OUT PUCHAR pByte0, OUT PUCHAR pByte1)
@@ -481,7 +481,7 @@ PNDIS_PACKET duplicate_pkt_with_TKIP_MIC(IN PRTMP_ADAPTER pAd,
skb = RTPKT_TO_OSPKT(pPacket);
if (skb_tailroom(skb) < TKIP_TX_MIC_SIZE) {
- // alloc a new skb and copy the packet
+ /* alloc a new skb and copy the packet */
newskb =
skb_copy_expand(skb, skb_headroom(skb), TKIP_TX_MIC_SIZE,
GFP_ATOMIC);
@@ -507,11 +507,11 @@ PNDIS_PACKET ClonePacket(IN PRTMP_ADAPTER pAd,
ASSERT(pPacket);
pRxPkt = RTPKT_TO_OSPKT(pPacket);
- // clone the packet
+ /* clone the packet */
pClonedPkt = skb_clone(pRxPkt, MEM_ALLOC_FLAG);
if (pClonedPkt) {
- // set the correct dataptr and data len
+ /* set the correct dataptr and data len */
pClonedPkt->dev = pRxPkt->dev;
pClonedPkt->data = pData;
pClonedPkt->len = DataSize;
@@ -521,9 +521,9 @@ PNDIS_PACKET ClonePacket(IN PRTMP_ADAPTER pAd,
return pClonedPkt;
}
-//
-// change OS packet DataPtr and DataLen
-//
+/* */
+/* change OS packet DataPtr and DataLen */
+/* */
void update_os_packet_info(IN PRTMP_ADAPTER pAd,
IN RX_BLK * pRxBlk, IN UCHAR FromWhichBSSID)
{
@@ -555,10 +555,10 @@ void wlan_802_11_to_802_3_packet(IN PRTMP_ADAPTER pAd,
pOSPkt->len = pRxBlk->DataSize;
pOSPkt->tail = pOSPkt->data + pOSPkt->len;
- //
- // copy 802.3 header
- //
- //
+ /* */
+ /* copy 802.3 header */
+ /* */
+ /* */
NdisMoveMemory(skb_push(pOSPkt, LENGTH_802_3), pHeader802_3,
LENGTH_802_3);
@@ -633,7 +633,7 @@ VOID RTMPSendWirelessEvent(IN PRTMP_ADAPTER pAd,
IN PUCHAR pAddr, IN UCHAR BssIdx, IN CHAR Rssi)
{
- //union iwreq_data wrqu;
+ /*union iwreq_data wrqu; */
PSTRING pBuf = NULL, pBufPtr = NULL;
USHORT event, type, BufLen;
UCHAR event_table_len = 0;
@@ -668,9 +668,9 @@ VOID RTMPSendWirelessEvent(IN PRTMP_ADAPTER pAd,
event));
return;
}
- //Allocate memory and copy the msg.
+ /*Allocate memory and copy the msg. */
if ((pBuf = kmalloc(IW_CUSTOM_MAX_LEN, GFP_ATOMIC)) != NULL) {
- //Prepare the payload
+ /*Prepare the payload */
memset(pBuf, 0, IW_CUSTOM_MAX_LEN);
pBufPtr = pBuf;
@@ -706,7 +706,7 @@ VOID RTMPSendWirelessEvent(IN PRTMP_ADAPTER pAd,
RtmpOSWrielessEventSend(pAd, IWEVCUSTOM, Event_flag, NULL,
(PUCHAR) pBuf, BufLen);
- //DBGPRINT(RT_DEBUG_TRACE, ("%s : %s\n", __func__, pBuf));
+ /*DBGPRINT(RT_DEBUG_TRACE, ("%s : %s\n", __func__, pBuf)); */
kfree(pBuf);
} else
@@ -723,7 +723,7 @@ void send_monitor_packets(IN PRTMP_ADAPTER pAd, IN RX_BLK * pRxBlk)
USHORT header_len = 0;
UCHAR temp_header[40] = { 0 };
- u_int32_t ralinkrate[256] = { 2, 4, 11, 22, 12, 18, 24, 36, 48, 72, 96, 108, 109, 110, 111, 112, 13, 26, 39, 52, 78, 104, 117, 130, 26, 52, 78, 104, 156, 208, 234, 260, 27, 54, 81, 108, 162, 216, 243, 270, // Last 38
+ u_int32_t ralinkrate[256] = { 2, 4, 11, 22, 12, 18, 24, 36, 48, 72, 96, 108, 109, 110, 111, 112, 13, 26, 39, 52, 78, 104, 117, 130, 26, 52, 78, 104, 156, 208, 234, 260, 27, 54, 81, 108, 162, 216, 243, 270, /* Last 38 */
54, 108, 162, 216, 324, 432, 486, 540, 14, 29, 43, 57, 87, 115,
130, 144, 29, 59, 87, 115, 173, 230, 260, 288, 30, 60, 90,
120, 180, 240, 270, 300, 60, 120, 180, 240, 360, 480, 540,
@@ -761,39 +761,39 @@ void send_monitor_packets(IN PRTMP_ADAPTER pAd, IN RX_BLK * pRxBlk)
else
header_len = LENGTH_802_11;
- // QOS
+ /* QOS */
if (pRxBlk->pHeader->FC.SubType & 0x08) {
header_len += 2;
- // Data skip QOS contorl field
+ /* Data skip QOS contorl field */
pRxBlk->DataSize -= 2;
}
- // Order bit: A-Ralink or HTC+
+ /* Order bit: A-Ralink or HTC+ */
if (pRxBlk->pHeader->FC.Order) {
header_len += 4;
- // Data skip HTC contorl field
+ /* Data skip HTC contorl field */
pRxBlk->DataSize -= 4;
}
- // Copy Header
+ /* Copy Header */
if (header_len <= 40)
NdisMoveMemory(temp_header, pRxBlk->pData, header_len);
- // skip HW padding
+ /* skip HW padding */
if (pRxBlk->RxD.L2PAD)
pRxBlk->pData += (header_len + 2);
else
pRxBlk->pData += header_len;
- } //end if
+ } /*end if */
if (pRxBlk->DataSize < pOSPkt->len) {
skb_trim(pOSPkt, pRxBlk->DataSize);
} else {
skb_put(pOSPkt, (pRxBlk->DataSize - pOSPkt->len));
- } //end if
+ } /*end if */
if ((pRxBlk->pData - pOSPkt->data) > 0) {
skb_put(pOSPkt, (pRxBlk->pData - pOSPkt->data));
skb_pull(pOSPkt, (pRxBlk->pData - pOSPkt->data));
- } //end if
+ } /*end if */
if (skb_headroom(pOSPkt) < (sizeof(wlan_ng_prism2_header) + header_len)) {
if (pskb_expand_head
@@ -803,8 +803,8 @@ void send_monitor_packets(IN PRTMP_ADAPTER pAd, IN RX_BLK * pRxBlk)
("%s : Reallocate header size of sk_buff fail!\n",
__func__));
goto err_free_sk_buff;
- } //end if
- } //end if
+ } /*end if */
+ } /*end if */
if (header_len > 0)
NdisMoveMemory(skb_push(pOSPkt, header_len), temp_header,
@@ -856,7 +856,7 @@ void send_monitor_packets(IN PRTMP_ADAPTER pAd, IN RX_BLK * pRxBlk)
ph->signal.did = DIDmsg_lnxind_wlansniffrm_signal;
ph->signal.status = 0;
ph->signal.len = 4;
- ph->signal.data = 0; //rssi + noise;
+ ph->signal.data = 0; /*rssi + noise; */
ph->noise.did = DIDmsg_lnxind_wlansniffrm_noise;
ph->noise.status = 0;
@@ -948,7 +948,7 @@ int RtmpOSIRQRelease(IN PNET_DEV pNetDev)
free_irq(pObj->pci_dev->irq, (net_dev));
RTMP_MSI_DISABLE(pAd);
}
-#endif // RTMP_PCI_SUPPORT //
+#endif /* RTMP_PCI_SUPPORT // */
return 0;
}
@@ -985,7 +985,7 @@ void RtmpOSFileSeek(RTMP_OS_FD osfd, int offset)
int RtmpOSFileRead(RTMP_OS_FD osfd, char *pDataPtr, int readLen)
{
- // The object must have a read method
+ /* The object must have a read method */
if (osfd->f_op && osfd->f_op->read) {
return osfd->f_op->read(osfd, pDataPtr, readLen, &osfd->f_pos);
} else {
@@ -1090,7 +1090,7 @@ NDIS_STATUS RtmpOSTaskAttach(IN RTMP_OS_TASK * pTask,
} else {
pTask->taskPID = GET_PID(pid_number);
- // Wait for the thread to start
+ /* Wait for the thread to start */
wait_for_completion(&pTask->taskComplete);
status = NDIS_STATUS_SUCCESS;
}
@@ -1172,7 +1172,7 @@ int RtmpOSNetDevAddrSet(IN PNET_DEV pNetDev, IN PUCHAR pMacAddr)
net_dev = pNetDev;
GET_PAD_FROM_NET_DEV(pAd, net_dev);
- // work-around for the SuSE due to it has it's own interface name management system.
+ /* work-around for the SuSE due to it has it's own interface name management system. */
{
NdisZeroMemory(pAd->StaCfg.dev_name, 16);
NdisMoveMemory(pAd->StaCfg.dev_name, net_dev->name,
@@ -1245,7 +1245,7 @@ void RtmpOSNetDevFree(PNET_DEV pNetDev)
INT RtmpOSNetDevAlloc(IN PNET_DEV * new_dev_p, IN UINT32 privDataSize)
{
- // assign it as null first.
+ /* assign it as null first. */
*new_dev_p = NULL;
DBGPRINT(RT_DEBUG_TRACE,
@@ -1281,7 +1281,7 @@ void RtmpOSNetDeviceRefPut(PNET_DEV pNetDev)
INT RtmpOSNetDevDestory(IN RTMP_ADAPTER * pAd, IN PNET_DEV pNetDev)
{
- // TODO: Need to fix this
+ /* TODO: Need to fix this */
printk("WARNING: This function(%s) not implement yet!!!\n", __func__);
return 0;
}
@@ -1297,7 +1297,7 @@ int RtmpOSNetDevAttach(IN PNET_DEV pNetDev,
int ret, rtnl_locked = FALSE;
DBGPRINT(RT_DEBUG_TRACE, ("RtmpOSNetDevAttach()--->\n"));
- // If we need hook some callback function to the net device structrue, now do it.
+ /* If we need hook some callback function to the net device structrue, now do it. */
if (pDevOpHook) {
PRTMP_ADAPTER pAd = NULL;
@@ -1312,7 +1312,7 @@ int RtmpOSNetDevAttach(IN PNET_DEV pNetDev,
pNetDev->wireless_handlers = &rt28xx_iw_handler_def;
}
- // copy the net device mac address to the net_device structure.
+ /* copy the net device mac address to the net_device structure. */
NdisMoveMemory(pNetDev->dev_addr, &pDevOpHook->devAddr[0],
MAC_ADDR_LEN);
diff --git a/drivers/staging/rt2860/rt_main_dev.c b/drivers/staging/rt2860/rt_main_dev.c
index 8f65e46..84be9d0 100644
--- a/drivers/staging/rt2860/rt_main_dev.c
+++ b/drivers/staging/rt2860/rt_main_dev.c
@@ -41,8 +41,8 @@
/* Private Variables Used */
/*---------------------------------------------------------------------*/
-PSTRING mac = ""; // default 00:00:00:00:00:00
-PSTRING hostname = ""; // default CMPC
+PSTRING mac = ""; /* default 00:00:00:00:00:00 */
+PSTRING hostname = ""; /* default CMPC */
module_param(mac, charp, 0);
MODULE_PARM_DESC(mac, "rt28xx: wireless mac addr");
@@ -50,11 +50,11 @@ MODULE_PARM_DESC(mac, "rt28xx: wireless mac addr");
/* Prototypes of Functions Used */
/*---------------------------------------------------------------------*/
-// public function prototype
+/* public function prototype */
int rt28xx_close(IN struct net_device *net_dev);
int rt28xx_open(struct net_device *net_dev);
-// private function prototype
+/* private function prototype */
static INT rt28xx_send_packets(IN struct sk_buff *skb_p,
IN struct net_device *net_dev);
@@ -87,9 +87,9 @@ int MainVirtualIF_close(IN struct net_device *net_dev)
GET_PAD_FROM_NET_DEV(pAd, net_dev);
- // Sanity check for pAd
+ /* Sanity check for pAd */
if (pAd == NULL)
- return 0; // close ok
+ return 0; /* close ok */
netif_carrier_off(pAd->net_dev);
netif_stop_queue(pAd->net_dev);
@@ -117,7 +117,7 @@ int MainVirtualIF_close(IN struct net_device *net_dev)
sizeof
(MLME_DISASSOC_REQ_STRUCT));
- // Prevent to connect AP again in STAMlmePeriodicExec
+ /* Prevent to connect AP again in STAMlmePeriodicExec */
pAd->MlmeAux.AutoReconnectSsidLen = 32;
NdisZeroMemory(pAd->MlmeAux.AutoReconnectSsid,
pAd->MlmeAux.
@@ -142,7 +142,7 @@ int MainVirtualIF_close(IN struct net_device *net_dev)
RT_MOD_DEC_USE_COUNT();
- return 0; // close ok
+ return 0; /* close ok */
}
/*
@@ -171,14 +171,14 @@ int MainVirtualIF_open(IN struct net_device *net_dev)
GET_PAD_FROM_NET_DEV(pAd, net_dev);
- // Sanity check for pAd
+ /* Sanity check for pAd */
if (pAd == NULL)
- return 0; // close ok
+ return 0; /* close ok */
if (VIRTUAL_IF_UP(pAd) != 0)
return -1;
- // increase MODULE use count
+ /* increase MODULE use count */
RT_MOD_INC_USE_COUNT();
netif_start_queue(net_dev);
@@ -218,35 +218,35 @@ int rt28xx_close(IN PNET_DEV dev)
#ifdef RTMP_MAC_USB
DECLARE_WAIT_QUEUE_HEAD(unlink_wakeup);
DECLARE_WAITQUEUE(wait, current);
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
GET_PAD_FROM_NET_DEV(pAd, net_dev);
DBGPRINT(RT_DEBUG_TRACE, ("===> rt28xx_close\n"));
Cancelled = FALSE;
- // Sanity check for pAd
+ /* Sanity check for pAd */
if (pAd == NULL)
- return 0; // close ok
+ return 0; /* close ok */
{
#ifdef RTMP_MAC_PCI
RTMPPCIeLinkCtrlValueRestore(pAd, RESTORE_CLOSE);
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
- // If dirver doesn't wake up firmware here,
- // NICLoadFirmware will hang forever when interface is up again.
+ /* If dirver doesn't wake up firmware here, */
+ /* NICLoadFirmware will hang forever when interface is up again. */
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)) {
AsicForceWakeup(pAd, TRUE);
}
#ifdef RTMP_MAC_USB
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_REMOVE_IN_PROGRESS);
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
MlmeRadioOff(pAd);
#ifdef RTMP_MAC_PCI
pAd->bPCIclkOff = FALSE;
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
}
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS);
@@ -261,13 +261,13 @@ int rt28xx_close(IN PNET_DEV dev)
}
#ifdef RTMP_MAC_USB
- // ensure there are no more active urbs.
+ /* ensure there are no more active urbs. */
add_wait_queue(&unlink_wakeup, &wait);
pAd->wait = &unlink_wakeup;
- // maybe wait for deletions to finish.
+ /* maybe wait for deletions to finish. */
i = 0;
- //while((i < 25) && atomic_read(&pAd->PendingRx) > 0)
+ /*while((i < 25) && atomic_read(&pAd->PendingRx) > 0) */
while (i < 25) {
unsigned long IrqFlags;
@@ -278,17 +278,17 @@ int rt28xx_close(IN PNET_DEV dev)
}
RTMP_IRQ_UNLOCK(&pAd->BulkInLock, IrqFlags);
- msleep(UNLINK_TIMEOUT_MS); //Time in millisecond
+ msleep(UNLINK_TIMEOUT_MS); /*Time in millisecond */
i++;
}
pAd->wait = NULL;
remove_wait_queue(&unlink_wakeup, &wait);
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
- // Stop Mlme state machine
+ /* Stop Mlme state machine */
MlmeHalt(pAd);
- // Close net tasklets
+ /* Close net tasklets */
RtmpNetTaskExit(pAd);
{
@@ -298,25 +298,25 @@ int rt28xx_close(IN PNET_DEV dev)
MeasureReqTabExit(pAd);
TpcReqTabExit(pAd);
- // Close kernel threads
+ /* Close kernel threads */
RtmpMgmtTaskExit(pAd);
#ifdef RTMP_MAC_PCI
{
BOOLEAN brc;
- // ULONG Value;
+ /* ULONG Value; */
if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_ACTIVE)) {
RTMP_ASIC_INTERRUPT_DISABLE(pAd);
}
- // Receive packets to clear DMA index after disable interrupt.
- //RTMPHandleRxDoneInterrupt(pAd);
- // put to radio off to save power when driver unload. After radiooff, can't write /read register. So need to finish all
- // register access before Radio off.
+ /* Receive packets to clear DMA index after disable interrupt. */
+ /*RTMPHandleRxDoneInterrupt(pAd); */
+ /* put to radio off to save power when driver unload. After radiooff, can't write /read register. So need to finish all */
+ /* register access before Radio off. */
brc = RT28xxPciAsicRadioOff(pAd, RTMP_HALT, 0);
-//In solution 3 of 3090F, the bPCIclkOff will be set to TRUE after calling RT28xxPciAsicRadioOff
+/*In solution 3 of 3090F, the bPCIclkOff will be set to TRUE after calling RT28xxPciAsicRadioOff */
pAd->bPCIclkOff = FALSE;
if (brc == FALSE) {
@@ -335,22 +335,22 @@ int rt28xx_close(IN PNET_DEV dev)
// Disable Rx, register value supposed will remain after reset
NICIssueReset(pAd);
*/
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
- // Free IRQ
+ /* Free IRQ */
if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE)) {
#ifdef RTMP_MAC_PCI
- // Deregister interrupt function
+ /* Deregister interrupt function */
RtmpOSIRQRelease(net_dev);
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE);
}
- // Free Ring or USB buffers
+ /* Free Ring or USB buffers */
RTMPFreeTxRxRingMemory(pAd);
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS);
- // Free BA reorder resource
+ /* Free BA reorder resource */
ba_reordering_resource_release(pAd);
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_START_UP);
@@ -360,7 +360,7 @@ int rt28xx_close(IN PNET_DEV dev)
}
DBGPRINT(RT_DEBUG_TRACE, ("<=== rt28xx_close\n"));
- return 0; // close ok
+ return 0; /* close ok */
} /* End of rt28xx_close */
/*
@@ -383,11 +383,11 @@ int rt28xx_open(IN PNET_DEV dev)
struct net_device *net_dev = (struct net_device *)dev;
PRTMP_ADAPTER pAd = NULL;
int retval = 0;
- //POS_COOKIE pObj;
+ /*POS_COOKIE pObj; */
GET_PAD_FROM_NET_DEV(pAd, net_dev);
- // Sanity check for pAd
+ /* Sanity check for pAd */
if (pAd == NULL) {
/* if 1st open fail, pAd will be free;
So the net_dev->ml_priv will be NULL in 2rd open */
@@ -399,52 +399,52 @@ int rt28xx_open(IN PNET_DEV dev)
net_dev->wireless_handlers =
(struct iw_handler_def *)&rt28xx_iw_handler_def;
}
- // Request interrupt service routine for PCI device
- // register the interrupt routine with the os
+ /* Request interrupt service routine for PCI device */
+ /* register the interrupt routine with the os */
RtmpOSIRQRequest(net_dev);
- // Init IRQ parameters stored in pAd
+ /* Init IRQ parameters stored in pAd */
RTMP_IRQ_INIT(pAd);
- // Chip & other init
+ /* Chip & other init */
if (rt28xx_init(pAd, mac, hostname) == FALSE)
goto err;
- // Enable Interrupt
+ /* Enable Interrupt */
RTMP_IRQ_ENABLE(pAd);
- // Now Enable RxTx
+ /* Now Enable RxTx */
RTMPEnableRxTx(pAd);
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_START_UP);
{
UINT32 reg = 0;
- RTMP_IO_READ32(pAd, 0x1300, ®); // clear garbage interrupts
+ RTMP_IO_READ32(pAd, 0x1300, ®); /* clear garbage interrupts */
printk("0x1300 = %08x\n", reg);
}
{
-// u32 reg;
-// UINT8 byte;
-// u16 tmp;
+/* u32 reg; */
+/* UINT8 byte; */
+/* u16 tmp; */
-// RTMP_IO_READ32(pAd, XIFS_TIME_CFG, ®);
+/* RTMP_IO_READ32(pAd, XIFS_TIME_CFG, ®); */
-// tmp = 0x0805;
-// reg = (reg & 0xffff0000) | tmp;
-// RTMP_IO_WRITE32(pAd, XIFS_TIME_CFG, reg);
+/* tmp = 0x0805; */
+/* reg = (reg & 0xffff0000) | tmp; */
+/* RTMP_IO_WRITE32(pAd, XIFS_TIME_CFG, reg); */
}
#ifdef RTMP_MAC_PCI
RTMPInitPCIeLinkCtrlValue(pAd);
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
return (retval);
err:
-//+++Add by shiang, move from rt28xx_init() to here.
+/*+++Add by shiang, move from rt28xx_init() to here. */
RtmpOSIRQRelease(net_dev);
-//---Add by shiang, move from rt28xx_init() to here.
+/*---Add by shiang, move from rt28xx_init() to here. */
return (-1);
} /* End of rt28xx_open */
@@ -463,7 +463,7 @@ PNET_DEV RtmpPhyNetDevInit(IN RTMP_ADAPTER * pAd,
IN RTMP_OS_NETDEV_OP_HOOK * pNetDevHook)
{
struct net_device *net_dev = NULL;
-// NDIS_STATUS Status;
+/* NDIS_STATUS Status; */
net_dev =
RtmpOSNetDevCreate(pAd, INT_MAIN, 0, sizeof(PRTMP_ADAPTER),
@@ -518,16 +518,16 @@ int rt28xx_packet_xmit(struct sk_buff *skb)
/* RT2870STA does this in RTMPSendPackets() */
{
- // Drop send request since we are in monitor mode
+ /* Drop send request since we are in monitor mode */
if (MONITOR_ON(pAd)) {
RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_FAILURE);
goto done;
}
}
- // EapolStart size is 18
+ /* EapolStart size is 18 */
if (skb->len < 14) {
- //printk("bad packet size: %d\n", pkt->len);
+ /*printk("bad packet size: %d\n", pkt->len); */
hex_dump("bad packet", skb->data, skb->len);
RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_FAILURE);
goto done;
@@ -577,7 +577,7 @@ static int rt28xx_send_packets(IN struct sk_buff *skb_p,
return rt28xx_packet_xmit(skb_p);
}
-// This function will be called when query /proc
+/* This function will be called when query /proc */
struct iw_statistics *rt28xx_get_wireless_stats(IN struct net_device *net_dev)
{
PRTMP_ADAPTER pAd = NULL;
@@ -586,9 +586,9 @@ struct iw_statistics *rt28xx_get_wireless_stats(IN struct net_device *net_dev)
DBGPRINT(RT_DEBUG_TRACE, ("rt28xx_get_wireless_stats --->\n"));
- pAd->iw_stats.status = 0; // Status - device dependent for now
+ pAd->iw_stats.status = 0; /* Status - device dependent for now */
- // link quality
+ /* link quality */
if (pAd->OpMode == OPMODE_STA)
pAd->iw_stats.qual.qual =
((pAd->Mlme.ChannelQuality * 12) / 10 + 10);
@@ -603,16 +603,16 @@ struct iw_statistics *rt28xx_get_wireless_stats(IN struct net_device *net_dev)
pAd->StaCfg.RssiSample.LastRssi2);
}
- pAd->iw_stats.qual.noise = pAd->BbpWriteLatch[66]; // noise level (dBm)
+ pAd->iw_stats.qual.noise = pAd->BbpWriteLatch[66]; /* noise level (dBm) */
pAd->iw_stats.qual.noise += 256 - 143;
- pAd->iw_stats.qual.updated = 1; // Flags to know if updated
+ pAd->iw_stats.qual.updated = 1; /* Flags to know if updated */
#ifdef IW_QUAL_DBM
- pAd->iw_stats.qual.updated |= IW_QUAL_DBM; // Level + Noise are dBm
-#endif // IW_QUAL_DBM //
+ pAd->iw_stats.qual.updated |= IW_QUAL_DBM; /* Level + Noise are dBm */
+#endif /* IW_QUAL_DBM // */
- pAd->iw_stats.discard.nwid = 0; // Rx : Wrong nwid/essid
- pAd->iw_stats.miss.beacon = 0; // Missed beacons/superframe
+ pAd->iw_stats.discard.nwid = 0; /* Rx : Wrong nwid/essid */
+ pAd->iw_stats.miss.beacon = 0; /* Missed beacons/superframe */
DBGPRINT(RT_DEBUG_TRACE, ("<--- rt28xx_get_wireless_stats\n"));
return &pAd->iw_stats;
@@ -620,7 +620,7 @@ struct iw_statistics *rt28xx_get_wireless_stats(IN struct net_device *net_dev)
void tbtt_tasklet(unsigned long data)
{
-//#define MAX_TX_IN_TBTT (16)
+/*#define MAX_TX_IN_TBTT (16) */
}
@@ -664,24 +664,24 @@ static struct net_device_stats *RT28xx_get_ether_stats(IN struct net_device
pAd->stats.rx_dropped = 0;
pAd->stats.tx_dropped = 0;
- pAd->stats.multicast = pAd->WlanCounters.MulticastReceivedFrameCount.QuadPart; // multicast packets received
- pAd->stats.collisions = pAd->Counters8023.OneCollision + pAd->Counters8023.MoreCollisions; // Collision packets
+ pAd->stats.multicast = pAd->WlanCounters.MulticastReceivedFrameCount.QuadPart; /* multicast packets received */
+ pAd->stats.collisions = pAd->Counters8023.OneCollision + pAd->Counters8023.MoreCollisions; /* Collision packets */
pAd->stats.rx_length_errors = 0;
- pAd->stats.rx_over_errors = pAd->Counters8023.RxNoBuffer; // receiver ring buff overflow
- pAd->stats.rx_crc_errors = 0; //pAd->WlanCounters.FCSErrorCount; // recved pkt with crc error
- pAd->stats.rx_frame_errors = pAd->Counters8023.RcvAlignmentErrors; // recv'd frame alignment error
- pAd->stats.rx_fifo_errors = pAd->Counters8023.RxNoBuffer; // recv'r fifo overrun
- pAd->stats.rx_missed_errors = 0; // receiver missed packet
+ pAd->stats.rx_over_errors = pAd->Counters8023.RxNoBuffer; /* receiver ring buff overflow */
+ pAd->stats.rx_crc_errors = 0; /*pAd->WlanCounters.FCSErrorCount; // recved pkt with crc error */
+ pAd->stats.rx_frame_errors = pAd->Counters8023.RcvAlignmentErrors; /* recv'd frame alignment error */
+ pAd->stats.rx_fifo_errors = pAd->Counters8023.RxNoBuffer; /* recv'r fifo overrun */
+ pAd->stats.rx_missed_errors = 0; /* receiver missed packet */
- // detailed tx_errors
+ /* detailed tx_errors */
pAd->stats.tx_aborted_errors = 0;
pAd->stats.tx_carrier_errors = 0;
pAd->stats.tx_fifo_errors = 0;
pAd->stats.tx_heartbeat_errors = 0;
pAd->stats.tx_window_errors = 0;
- // for cslip etc
+ /* for cslip etc */
pAd->stats.rx_compressed = 0;
pAd->stats.tx_compressed = 0;
@@ -693,7 +693,7 @@ static struct net_device_stats *RT28xx_get_ether_stats(IN struct net_device
BOOLEAN RtmpPhyNetDevExit(IN RTMP_ADAPTER * pAd, IN PNET_DEV net_dev)
{
- // Unregister network device
+ /* Unregister network device */
if (net_dev != NULL) {
printk
("RtmpOSNetDevDetach(): RtmpOSNetDeviceDetach(), dev->name=%s!\n",
@@ -724,7 +724,7 @@ Note:
NDIS_STATUS AdapterBlockAllocateMemory(IN PVOID handle, OUT PVOID * ppAd)
{
- *ppAd = (PVOID) vmalloc(sizeof(RTMP_ADAPTER)); //pci_alloc_consistent(pci_dev, sizeof(RTMP_ADAPTER), phy_addr);
+ *ppAd = (PVOID) vmalloc(sizeof(RTMP_ADAPTER)); /*pci_alloc_consistent(pci_dev, sizeof(RTMP_ADAPTER), phy_addr); */
if (*ppAd) {
NdisZeroMemory(*ppAd, sizeof(RTMP_ADAPTER));
diff --git a/drivers/staging/rt2860/rt_pci_rbus.c b/drivers/staging/rt2860/rt_pci_rbus.c
index 8ae0e3e..0f75c3f 100644
--- a/drivers/staging/rt2860/rt_pci_rbus.c
+++ b/drivers/staging/rt2860/rt_pci_rbus.c
@@ -51,23 +51,23 @@ static void fifo_statistic_full_tasklet(unsigned long data);
/*---------------------------------------------------------------------*/
/* Symbol & Macro Definitions */
/*---------------------------------------------------------------------*/
-#define RT2860_INT_RX_DLY (1<<0) // bit 0
-#define RT2860_INT_TX_DLY (1<<1) // bit 1
-#define RT2860_INT_RX_DONE (1<<2) // bit 2
-#define RT2860_INT_AC0_DMA_DONE (1<<3) // bit 3
-#define RT2860_INT_AC1_DMA_DONE (1<<4) // bit 4
-#define RT2860_INT_AC2_DMA_DONE (1<<5) // bit 5
-#define RT2860_INT_AC3_DMA_DONE (1<<6) // bit 6
-#define RT2860_INT_HCCA_DMA_DONE (1<<7) // bit 7
-#define RT2860_INT_MGMT_DONE (1<<8) // bit 8
+#define RT2860_INT_RX_DLY (1<<0) /* bit 0 */
+#define RT2860_INT_TX_DLY (1<<1) /* bit 1 */
+#define RT2860_INT_RX_DONE (1<<2) /* bit 2 */
+#define RT2860_INT_AC0_DMA_DONE (1<<3) /* bit 3 */
+#define RT2860_INT_AC1_DMA_DONE (1<<4) /* bit 4 */
+#define RT2860_INT_AC2_DMA_DONE (1<<5) /* bit 5 */
+#define RT2860_INT_AC3_DMA_DONE (1<<6) /* bit 6 */
+#define RT2860_INT_HCCA_DMA_DONE (1<<7) /* bit 7 */
+#define RT2860_INT_MGMT_DONE (1<<8) /* bit 8 */
#define INT_RX RT2860_INT_RX_DONE
-#define INT_AC0_DLY (RT2860_INT_AC0_DMA_DONE) //| RT2860_INT_TX_DLY)
-#define INT_AC1_DLY (RT2860_INT_AC1_DMA_DONE) //| RT2860_INT_TX_DLY)
-#define INT_AC2_DLY (RT2860_INT_AC2_DMA_DONE) //| RT2860_INT_TX_DLY)
-#define INT_AC3_DLY (RT2860_INT_AC3_DMA_DONE) //| RT2860_INT_TX_DLY)
-#define INT_HCCA_DLY (RT2860_INT_HCCA_DMA_DONE) //| RT2860_INT_TX_DLY)
+#define INT_AC0_DLY (RT2860_INT_AC0_DMA_DONE) /*| RT2860_INT_TX_DLY) */
+#define INT_AC1_DLY (RT2860_INT_AC1_DMA_DONE) /*| RT2860_INT_TX_DLY) */
+#define INT_AC2_DLY (RT2860_INT_AC2_DMA_DONE) /*| RT2860_INT_TX_DLY) */
+#define INT_AC3_DLY (RT2860_INT_AC3_DMA_DONE) /*| RT2860_INT_TX_DLY) */
+#define INT_HCCA_DLY (RT2860_INT_HCCA_DMA_DONE) /*| RT2860_INT_TX_DLY) */
#define INT_MGMT_DLY RT2860_INT_MGMT_DONE
/***************************************************************************
@@ -76,7 +76,7 @@ static void fifo_statistic_full_tasklet(unsigned long data);
* Mainly for Hardware TxDesc/RxDesc/MgmtDesc, DMA Memory for TxData/RxData, etc.,
*
**************************************************************************/
-// Function for TxDesc Memory allocation.
+/* Function for TxDesc Memory allocation. */
void RTMP_AllocateTxDescMemory(IN PRTMP_ADAPTER pAd,
IN UINT Index,
IN ULONG Length,
@@ -92,7 +92,7 @@ void RTMP_AllocateTxDescMemory(IN PRTMP_ADAPTER pAd,
}
-// Function for MgmtDesc Memory allocation.
+/* Function for MgmtDesc Memory allocation. */
void RTMP_AllocateMgmtDescMemory(IN PRTMP_ADAPTER pAd,
IN ULONG Length,
IN BOOLEAN Cached,
@@ -107,7 +107,7 @@ void RTMP_AllocateMgmtDescMemory(IN PRTMP_ADAPTER pAd,
}
-// Function for RxDesc Memory allocation.
+/* Function for RxDesc Memory allocation. */
void RTMP_AllocateRxDescMemory(IN PRTMP_ADAPTER pAd,
IN ULONG Length,
IN BOOLEAN Cached,
@@ -122,7 +122,7 @@ void RTMP_AllocateRxDescMemory(IN PRTMP_ADAPTER pAd,
}
-// Function for free allocated Desc Memory.
+/* Function for free allocated Desc Memory. */
void RTMP_FreeDescMemory(IN PRTMP_ADAPTER pAd,
IN ULONG Length,
IN PVOID VirtualAddress,
@@ -134,7 +134,7 @@ void RTMP_FreeDescMemory(IN PRTMP_ADAPTER pAd,
PhysicalAddress);
}
-// Function for TxData DMA Memory allocation.
+/* Function for TxData DMA Memory allocation. */
void RTMP_AllocateFirstTxBuffer(IN PRTMP_ADAPTER pAd,
IN UINT Index,
IN ULONG Length,
@@ -305,12 +305,12 @@ static inline void rt2860_int_enable(PRTMP_ADAPTER pAd, unsigned int mode)
pAd->int_disable_mask &= ~(mode);
regValue = pAd->int_enable_reg & ~(pAd->int_disable_mask);
- //if (!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
+ /*if (!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)) */
{
- RTMP_IO_WRITE32(pAd, INT_MASK_CSR, regValue); // 1:enable
+ RTMP_IO_WRITE32(pAd, INT_MASK_CSR, regValue); /* 1:enable */
}
- //else
- // DBGPRINT(RT_DEBUG_TRACE, ("fOP_STATUS_DOZE !\n"));
+ /*else */
+ /* DBGPRINT(RT_DEBUG_TRACE, ("fOP_STATUS_DOZE !\n")); */
if (regValue != 0)
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_ACTIVE);
@@ -322,7 +322,7 @@ static inline void rt2860_int_disable(PRTMP_ADAPTER pAd, unsigned int mode)
pAd->int_disable_mask |= mode;
regValue = pAd->int_enable_reg & ~(pAd->int_disable_mask);
- RTMP_IO_WRITE32(pAd, INT_MASK_CSR, regValue); // 0: disable
+ RTMP_IO_WRITE32(pAd, INT_MASK_CSR, regValue); /* 0: disable */
if (regValue == 0) {
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_ACTIVE);
@@ -341,23 +341,23 @@ static void mgmt_dma_done_tasklet(unsigned long data)
INT_SOURCE_CSR_STRUC IntSource;
POS_COOKIE pObj;
- // Do nothing if the driver is starting halt state.
- // This might happen when timer already been fired before cancel timer with mlmehalt
+ /* Do nothing if the driver is starting halt state. */
+ /* This might happen when timer already been fired before cancel timer with mlmehalt */
if (RTMP_TEST_FLAG
(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST))
return;
pObj = (POS_COOKIE) pAd->OS_Cookie;
-// printk("mgmt_dma_done_process\n");
+/* printk("mgmt_dma_done_process\n"); */
IntSource.word = 0;
IntSource.field.MgmtDmaDone = 1;
pAd->int_pending &= ~INT_MGMT_DLY;
RTMPHandleMgmtRingDmaDoneInterrupt(pAd);
- // if you use RTMP_SEM_LOCK, sometimes kernel will hang up, no any
- // bug report output
+ /* if you use RTMP_SEM_LOCK, sometimes kernel will hang up, no any */
+ /* bug report output */
RTMP_INT_LOCK(&pAd->irq_lock, flags);
/*
* double check to avoid lose of interrupts
@@ -380,8 +380,8 @@ static void rx_done_tasklet(unsigned long data)
BOOLEAN bReschedule = 0;
POS_COOKIE pObj;
- // Do nothing if the driver is starting halt state.
- // This might happen when timer already been fired before cancel timer with mlmehalt
+ /* Do nothing if the driver is starting halt state. */
+ /* This might happen when timer already been fired before cancel timer with mlmehalt */
if (RTMP_TEST_FLAG
(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST))
return;
@@ -413,8 +413,8 @@ void fifo_statistic_full_tasklet(unsigned long data)
PRTMP_ADAPTER pAd = (PRTMP_ADAPTER) data;
POS_COOKIE pObj;
- // Do nothing if the driver is starting halt state.
- // This might happen when timer already been fired before cancel timer with mlmehalt
+ /* Do nothing if the driver is starting halt state. */
+ /* This might happen when timer already been fired before cancel timer with mlmehalt */
if (RTMP_TEST_FLAG
(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST))
return;
@@ -449,15 +449,15 @@ static void ac3_dma_done_tasklet(unsigned long data)
POS_COOKIE pObj;
BOOLEAN bReschedule = 0;
- // Do nothing if the driver is starting halt state.
- // This might happen when timer already been fired before cancel timer with mlmehalt
+ /* Do nothing if the driver is starting halt state. */
+ /* This might happen when timer already been fired before cancel timer with mlmehalt */
if (RTMP_TEST_FLAG
(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST))
return;
pObj = (POS_COOKIE) pAd->OS_Cookie;
-// printk("ac0_dma_done_process\n");
+/* printk("ac0_dma_done_process\n"); */
IntSource.word = 0;
IntSource.field.Ac3DmaDone = 1;
pAd->int_pending &= ~INT_AC3_DLY;
@@ -487,8 +487,8 @@ static void ac2_dma_done_tasklet(unsigned long data)
POS_COOKIE pObj;
BOOLEAN bReschedule = 0;
- // Do nothing if the driver is starting halt state.
- // This might happen when timer already been fired before cancel timer with mlmehalt
+ /* Do nothing if the driver is starting halt state. */
+ /* This might happen when timer already been fired before cancel timer with mlmehalt */
if (RTMP_TEST_FLAG
(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST))
return;
@@ -525,15 +525,15 @@ static void ac1_dma_done_tasklet(unsigned long data)
POS_COOKIE pObj;
BOOLEAN bReschedule = 0;
- // Do nothing if the driver is starting halt state.
- // This might happen when timer already been fired before cancel timer with mlmehalt
+ /* Do nothing if the driver is starting halt state. */
+ /* This might happen when timer already been fired before cancel timer with mlmehalt */
if (RTMP_TEST_FLAG
(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST))
return;
pObj = (POS_COOKIE) pAd->OS_Cookie;
-// printk("ac0_dma_done_process\n");
+/* printk("ac0_dma_done_process\n"); */
IntSource.word = 0;
IntSource.field.Ac1DmaDone = 1;
pAd->int_pending &= ~INT_AC1_DLY;
@@ -563,20 +563,20 @@ static void ac0_dma_done_tasklet(unsigned long data)
POS_COOKIE pObj;
BOOLEAN bReschedule = 0;
- // Do nothing if the driver is starting halt state.
- // This might happen when timer already been fired before cancel timer with mlmehalt
+ /* Do nothing if the driver is starting halt state. */
+ /* This might happen when timer already been fired before cancel timer with mlmehalt */
if (RTMP_TEST_FLAG
(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST))
return;
pObj = (POS_COOKIE) pAd->OS_Cookie;
-// printk("ac0_dma_done_process\n");
+/* printk("ac0_dma_done_process\n"); */
IntSource.word = 0;
IntSource.field.Ac0DmaDone = 1;
pAd->int_pending &= ~INT_AC0_DLY;
-// RTMPHandleMgmtRingDmaDoneInterrupt(pAd);
+/* RTMPHandleMgmtRingDmaDoneInterrupt(pAd); */
bReschedule = RTMPHandleTxRingDmaDoneInterrupt(pAd, IntSource);
RTMP_INT_LOCK(&pAd->irq_lock, flags);
@@ -617,52 +617,52 @@ IRQ_HANDLE_TYPE rt2860_interrupt(int irq, void *dev_instance)
RTMP_IO_WRITE32(pAd, INT_SOURCE_CSR, IntSource.word);
Or kernel will panic after ifconfig ra0 down sometimes */
- //
- // Inital the Interrupt source.
- //
+ /* */
+ /* Inital the Interrupt source. */
+ /* */
IntSource.word = 0x00000000L;
-// McuIntSource.word = 0x00000000L;
-
- //
- // Get the interrupt sources & saved to local variable
- //
- //RTMP_IO_READ32(pAd, where, &McuIntSource.word);
- //RTMP_IO_WRITE32(pAd, , McuIntSource.word);
-
- //
- // Flag fOP_STATUS_DOZE On, means ASIC put to sleep, elase means ASICK WakeUp
- // And at the same time, clock maybe turned off that say there is no DMA service.
- // when ASIC get to sleep.
- // To prevent system hang on power saving.
- // We need to check it before handle the INT_SOURCE_CSR, ASIC must be wake up.
- //
- // RT2661 => when ASIC is sleeping, MAC register cannot be read and written.
- // RT2860 => when ASIC is sleeping, MAC register can be read and written.
-// if (!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
+/* McuIntSource.word = 0x00000000L; */
+
+ /* */
+ /* Get the interrupt sources & saved to local variable */
+ /* */
+ /*RTMP_IO_READ32(pAd, where, &McuIntSource.word); */
+ /*RTMP_IO_WRITE32(pAd, , McuIntSource.word); */
+
+ /* */
+ /* Flag fOP_STATUS_DOZE On, means ASIC put to sleep, elase means ASICK WakeUp */
+ /* And at the same time, clock maybe turned off that say there is no DMA service. */
+ /* when ASIC get to sleep. */
+ /* To prevent system hang on power saving. */
+ /* We need to check it before handle the INT_SOURCE_CSR, ASIC must be wake up. */
+ /* */
+ /* RT2661 => when ASIC is sleeping, MAC register cannot be read and written. */
+ /* RT2860 => when ASIC is sleeping, MAC register can be read and written. */
+/* if (!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)) */
{
RTMP_IO_READ32(pAd, INT_SOURCE_CSR, &IntSource.word);
- RTMP_IO_WRITE32(pAd, INT_SOURCE_CSR, IntSource.word); // write 1 to clear
+ RTMP_IO_WRITE32(pAd, INT_SOURCE_CSR, IntSource.word); /* write 1 to clear */
}
-// else
-// DBGPRINT(RT_DEBUG_TRACE, (">>>fOP_STATUS_DOZE<<<\n"));
+/* else */
+/* DBGPRINT(RT_DEBUG_TRACE, (">>>fOP_STATUS_DOZE<<<\n")); */
-// RTMP_IO_READ32(pAd, INT_SOURCE_CSR, &IsrAfterClear);
-// RTMP_IO_READ32(pAd, MCU_INT_SOURCE_CSR, &McuIsrAfterClear);
-// DBGPRINT(RT_DEBUG_INFO, ("====> RTMPHandleInterrupt(ISR=%08x,Mcu ISR=%08x, After clear ISR=%08x, MCU ISR=%08x)\n",
-// IntSource.word, McuIntSource.word, IsrAfterClear, McuIsrAfterClear));
+/* RTMP_IO_READ32(pAd, INT_SOURCE_CSR, &IsrAfterClear); */
+/* RTMP_IO_READ32(pAd, MCU_INT_SOURCE_CSR, &McuIsrAfterClear); */
+/* DBGPRINT(RT_DEBUG_INFO, ("====> RTMPHandleInterrupt(ISR=%08x,Mcu ISR=%08x, After clear ISR=%08x, MCU ISR=%08x)\n", */
+/* IntSource.word, McuIntSource.word, IsrAfterClear, McuIsrAfterClear)); */
- // Do nothing if Reset in progress
+ /* Do nothing if Reset in progress */
if (RTMP_TEST_FLAG
(pAd,
(fRTMP_ADAPTER_RESET_IN_PROGRESS |
fRTMP_ADAPTER_HALT_IN_PROGRESS))) {
return IRQ_HANDLED;
}
- //
- // Handle interrupt, walk through all bits
- // Should start from highest priority interrupt
- // The priority can be adjust by altering processing if statement
- //
+ /* */
+ /* Handle interrupt, walk through all bits */
+ /* Should start from highest priority interrupt */
+ /* The priority can be adjust by altering processing if statement */
+ /* */
#ifdef DBG
@@ -670,11 +670,11 @@ IRQ_HANDLE_TYPE rt2860_interrupt(int irq, void *dev_instance)
pAd->bPCIclkOff = FALSE;
- // If required spinlock, each interrupt service routine has to acquire
- // and release itself.
- //
+ /* If required spinlock, each interrupt service routine has to acquire */
+ /* and release itself. */
+ /* */
- // Do nothing if NIC doesn't exist
+ /* Do nothing if NIC doesn't exist */
if (IntSource.word == 0xffffffff) {
RTMP_SET_FLAG(pAd,
(fRTMP_ADAPTER_NIC_NOT_EXIST |
diff --git a/drivers/staging/rt2860/rt_usb.c b/drivers/staging/rt2860/rt_usb.c
index 30fc4bb..e4668dc 100644
--- a/drivers/staging/rt2860/rt_usb.c
+++ b/drivers/staging/rt2860/rt_usb.c
@@ -138,15 +138,15 @@ VOID RtmpMgmtTaskExit(IN RTMP_ADAPTER * pAd)
INT ret;
RTMP_OS_TASK *pTask;
- // Sleep 50 milliseconds so pending io might finish normally
+ /* Sleep 50 milliseconds so pending io might finish normally */
RTMPusecDelay(50000);
- // We want to wait until all pending receives and sends to the
- // device object. We cancel any
- // irps. Wait until sends and receives have stopped.
+ /* We want to wait until all pending receives and sends to the */
+ /* device object. We cancel any */
+ /* irps. Wait until sends and receives have stopped. */
RTUSBCancelPendingIRPs(pAd);
- // We need clear timerQ related structure before exits of the timer thread.
+ /* We need clear timerQ related structure before exits of the timer thread. */
RtmpTimerQExit(pAd);
/* Terminate Mlme Thread */
@@ -172,7 +172,7 @@ VOID RtmpMgmtTaskExit(IN RTMP_ADAPTER * pAd)
pAd->CmdQ.CmdQState = RTMP_TASK_STAT_STOPED;
NdisReleaseSpinLock(&pAd->CmdQLock);
mb();
- //RTUSBCMDUp(pAd);
+ /*RTUSBCMDUp(pAd); */
ret = RtmpOSTaskKill(pTask);
if (ret == NDIS_STATUS_FAILURE) {
DBGPRINT(RT_DEBUG_ERROR, ("%s: kill task(%s) failed!\n",
@@ -211,12 +211,12 @@ static void rtusb_dataout_complete(unsigned long data)
pObj = (POS_COOKIE) pAd->OS_Cookie;
Status = pUrb->status;
- // Store BulkOut PipeId
+ /* Store BulkOut PipeId */
BulkOutPipeId = pHTTXContext->BulkOutPipeId;
pAd->BulkOutDataOneSecCount++;
- //DBGPRINT(RT_DEBUG_LOUD, ("Done-B(%d):I=0x%lx, CWPos=%ld, NBPos=%ld, ENBPos=%ld, bCopy=%d!\n", BulkOutPipeId, in_interrupt(), pHTTXContext->CurWritePosition,
- // pHTTXContext->NextBulkOutPosition, pHTTXContext->ENextBulkOutPosition, pHTTXContext->bCopySavePad));
+ /*DBGPRINT(RT_DEBUG_LOUD, ("Done-B(%d):I=0x%lx, CWPos=%ld, NBPos=%ld, ENBPos=%ld, bCopy=%d!\n", BulkOutPipeId, in_interrupt(), pHTTXContext->CurWritePosition, */
+ /* pHTTXContext->NextBulkOutPosition, pHTTXContext->ENextBulkOutPosition, pHTTXContext->bCopySavePad)); */
RTMP_IRQ_LOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags);
pAd->BulkOutPending[BulkOutPipeId] = FALSE;
@@ -229,11 +229,11 @@ static void rtusb_dataout_complete(unsigned long data)
RTMP_IRQ_UNLOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags);
pAd->Counters8023.GoodTransmits++;
- //RTMP_IRQ_LOCK(&pAd->TxContextQueueLock[BulkOutPipeId], IrqFlags);
+ /*RTMP_IRQ_LOCK(&pAd->TxContextQueueLock[BulkOutPipeId], IrqFlags); */
FREE_HTTX_RING(pAd, BulkOutPipeId, pHTTXContext);
- //RTMP_IRQ_UNLOCK(&pAd->TxContextQueueLock[BulkOutPipeId], IrqFlags);
+ /*RTMP_IRQ_UNLOCK(&pAd->TxContextQueueLock[BulkOutPipeId], IrqFlags); */
- } else // STATUS_OTHER
+ } else /* STATUS_OTHER */
{
PUCHAR pBuf;
@@ -264,15 +264,15 @@ static void rtusb_dataout_complete(unsigned long data)
("\t>>BulkOut Header:%x %x %x %x %x %x %x %x\n",
pBuf[0], pBuf[1], pBuf[2], pBuf[3], pBuf[4],
pBuf[5], pBuf[6], pBuf[7]));
- //DBGPRINT_RAW(RT_DEBUG_ERROR, (">>BulkOutCompleteCancel=0x%x, BulkOutCompleteOther=0x%x\n", pAd->BulkOutCompleteCancel, pAd->BulkOutCompleteOther));
+ /*DBGPRINT_RAW(RT_DEBUG_ERROR, (">>BulkOutCompleteCancel=0x%x, BulkOutCompleteOther=0x%x\n", pAd->BulkOutCompleteCancel, pAd->BulkOutCompleteOther)); */
}
- //
- // bInUse = TRUE, means some process are filling TX data, after that must turn on bWaitingBulkOut
- // bWaitingBulkOut = TRUE, means the TX data are waiting for bulk out.
- //
- //RTMP_IRQ_LOCK(&pAd->TxContextQueueLock[BulkOutPipeId], IrqFlags);
+ /* */
+ /* bInUse = TRUE, means some process are filling TX data, after that must turn on bWaitingBulkOut */
+ /* bWaitingBulkOut = TRUE, means the TX data are waiting for bulk out. */
+ /* */
+ /*RTMP_IRQ_LOCK(&pAd->TxContextQueueLock[BulkOutPipeId], IrqFlags); */
if ((pHTTXContext->ENextBulkOutPosition !=
pHTTXContext->CurWritePosition)
&& (pHTTXContext->ENextBulkOutPosition !=
@@ -280,15 +280,15 @@ static void rtusb_dataout_complete(unsigned long data)
&& !RTUSB_TEST_BULK_FLAG(pAd,
(fRTUSB_BULK_OUT_DATA_FRAG <<
BulkOutPipeId))) {
- // Indicate There is data avaliable
+ /* Indicate There is data avaliable */
RTUSB_SET_BULK_FLAG(pAd,
(fRTUSB_BULK_OUT_DATA_NORMAL <<
BulkOutPipeId));
}
- //RTMP_IRQ_UNLOCK(&pAd->TxContextQueueLock[BulkOutPipeId], IrqFlags);
+ /*RTMP_IRQ_UNLOCK(&pAd->TxContextQueueLock[BulkOutPipeId], IrqFlags); */
- // Always call Bulk routine, even reset bulk.
- // The protection of rest bulk should be in BulkOut routine
+ /* Always call Bulk routine, even reset bulk. */
+ /* The protection of rest bulk should be in BulkOut routine */
RTUSBKickBulkOut(pAd);
}
@@ -305,7 +305,7 @@ static void rtusb_null_frame_done_tasklet(unsigned long data)
pAd = pNullContext->pAd;
Status = pUrb->status;
- // Reset Null frame context flags
+ /* Reset Null frame context flags */
RTMP_IRQ_LOCK(&pAd->BulkOutLock[0], irqFlag);
pNullContext->IRPPending = FALSE;
pNullContext->InUse = FALSE;
@@ -316,7 +316,7 @@ static void rtusb_null_frame_done_tasklet(unsigned long data)
RTMP_IRQ_UNLOCK(&pAd->BulkOutLock[0], irqFlag);
RTMPDeQueuePacket(pAd, FALSE, NUM_OF_TX_RING, MAX_TX_PROCESS);
- } else // STATUS_OTHER
+ } else /* STATUS_OTHER */
{
if ((!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS)) &&
(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS)) &&
@@ -336,8 +336,8 @@ static void rtusb_null_frame_done_tasklet(unsigned long data)
}
}
- // Always call Bulk routine, even reset bulk.
- // The protectioon of rest bulk should be in BulkOut routine
+ /* Always call Bulk routine, even reset bulk. */
+ /* The protectioon of rest bulk should be in BulkOut routine */
RTUSBKickBulkOut(pAd);
}
@@ -354,7 +354,7 @@ static void rtusb_rts_frame_done_tasklet(unsigned long data)
pAd = pRTSContext->pAd;
Status = pUrb->status;
- // Reset RTS frame context flags
+ /* Reset RTS frame context flags */
RTMP_IRQ_LOCK(&pAd->BulkOutLock[0], irqFlag);
pRTSContext->IRPPending = FALSE;
pRTSContext->InUse = FALSE;
@@ -362,7 +362,7 @@ static void rtusb_rts_frame_done_tasklet(unsigned long data)
if (Status == USB_ST_NOERROR) {
RTMP_IRQ_UNLOCK(&pAd->BulkOutLock[0], irqFlag);
RTMPDeQueuePacket(pAd, FALSE, NUM_OF_TX_RING, MAX_TX_PROCESS);
- } else // STATUS_OTHER
+ } else /* STATUS_OTHER */
{
if ((!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS)) &&
(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS)) &&
@@ -385,8 +385,8 @@ static void rtusb_rts_frame_done_tasklet(unsigned long data)
pAd->BulkOutPending[pRTSContext->BulkOutPipeId] = FALSE;
RTMP_SEM_UNLOCK(&pAd->BulkOutLock[pRTSContext->BulkOutPipeId]);
- // Always call Bulk routine, even reset bulk.
- // The protectioon of rest bulk should be in BulkOut routine
+ /* Always call Bulk routine, even reset bulk. */
+ /* The protectioon of rest bulk should be in BulkOut routine */
RTUSBKickBulkOut(pAd);
}
@@ -403,14 +403,14 @@ static void rtusb_pspoll_frame_done_tasklet(unsigned long data)
pAd = pPsPollContext->pAd;
Status = pUrb->status;
- // Reset PsPoll context flags
+ /* Reset PsPoll context flags */
pPsPollContext->IRPPending = FALSE;
pPsPollContext->InUse = FALSE;
pAd->watchDogTxPendingCnt[0] = 0;
if (Status == USB_ST_NOERROR) {
RTMPDeQueuePacket(pAd, FALSE, NUM_OF_TX_RING, MAX_TX_PROCESS);
- } else // STATUS_OTHER
+ } else /* STATUS_OTHER */
{
if ((!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS)) &&
(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS)) &&
@@ -430,8 +430,8 @@ static void rtusb_pspoll_frame_done_tasklet(unsigned long data)
pAd->BulkOutPending[0] = FALSE;
RTMP_SEM_UNLOCK(&pAd->BulkOutLock[0]);
- // Always call Bulk routine, even reset bulk.
- // The protectioon of rest bulk should be in BulkOut routine
+ /* Always call Bulk routine, even reset bulk. */
+ /* The protectioon of rest bulk should be in BulkOut routine */
RTUSBKickBulkOut(pAd);
}
@@ -467,26 +467,26 @@ static void rx_done_tasklet(unsigned long data)
pRxContext->InUse = FALSE;
pRxContext->IRPPending = FALSE;
pRxContext->BulkInOffset += pUrb->actual_length;
- //NdisInterlockedDecrement(&pAd->PendingRx);
+ /*NdisInterlockedDecrement(&pAd->PendingRx); */
pAd->PendingRx--;
if (Status == USB_ST_NOERROR) {
pAd->BulkInComplete++;
pAd->NextRxBulkInPosition = 0;
- if (pRxContext->BulkInOffset) // As jan's comment, it may bulk-in success but size is zero.
+ if (pRxContext->BulkInOffset) /* As jan's comment, it may bulk-in success but size is zero. */
{
pRxContext->Readable = TRUE;
INC_RING_INDEX(pAd->NextRxBulkInIndex, RX_RING_SIZE);
}
RTMP_IRQ_UNLOCK(&pAd->BulkInLock, IrqFlags);
- } else // STATUS_OTHER
+ } else /* STATUS_OTHER */
{
pAd->BulkInCompleteFail++;
- // Still read this packet although it may comtain wrong bytes.
+ /* Still read this packet although it may comtain wrong bytes. */
pRxContext->Readable = FALSE;
RTMP_IRQ_UNLOCK(&pAd->BulkInLock, IrqFlags);
- // Parsing all packets. because after reset, the index will reset to all zero.
+ /* Parsing all packets. because after reset, the index will reset to all zero. */
if ((!RTMP_TEST_FLAG(pAd, (fRTMP_ADAPTER_RESET_IN_PROGRESS |
fRTMP_ADAPTER_BULKIN_RESET |
fRTMP_ADAPTER_HALT_IN_PROGRESS |
@@ -533,7 +533,7 @@ static void rtusb_mgmt_dma_done_tasklet(unsigned long data)
RTMP_IRQ_LOCK(&pAd->BulkOutLock[MGMTPIPEIDX], IrqFlags);
if (Status != USB_ST_NOERROR) {
- //Bulk-Out fail status handle
+ /*Bulk-Out fail status handle */
if ((!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS)) &&
(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS)) &&
(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)) &&
@@ -541,7 +541,7 @@ static void rtusb_mgmt_dma_done_tasklet(unsigned long data)
DBGPRINT_RAW(RT_DEBUG_ERROR,
("Bulk Out MLME Failed, Status=%d!\n",
Status));
- // TODO: How to handle about the MLMEBulkOut failed issue. Need to resend the mgmt pkt?
+ /* TODO: How to handle about the MLMEBulkOut failed issue. Need to resend the mgmt pkt? */
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET);
pAd->bulkResetPipeid =
(MGMTPIPEIDX | BULKOUT_MGMT_RESET_FLAG);
@@ -552,7 +552,7 @@ static void rtusb_mgmt_dma_done_tasklet(unsigned long data)
RTMP_IRQ_UNLOCK(&pAd->BulkOutLock[MGMTPIPEIDX], IrqFlags);
RTMP_IRQ_LOCK(&pAd->MLMEBulkOutLock, IrqFlags);
- // Reset MLME context flags
+ /* Reset MLME context flags */
pMLMEContext->IRPPending = FALSE;
pMLMEContext->InUse = FALSE;
pMLMEContext->bWaitingBulkOut = FALSE;
@@ -561,27 +561,27 @@ static void rtusb_mgmt_dma_done_tasklet(unsigned long data)
pPacket = pAd->MgmtRing.Cell[index].pNdisPacket;
pAd->MgmtRing.Cell[index].pNdisPacket = NULL;
- // Increase MgmtRing Index
+ /* Increase MgmtRing Index */
INC_RING_INDEX(pAd->MgmtRing.TxDmaIdx, MGMT_RING_SIZE);
pAd->MgmtRing.TxSwFreeIdx++;
RTMP_IRQ_UNLOCK(&pAd->MLMEBulkOutLock, IrqFlags);
- // No-matter success or fail, we free the mgmt packet.
+ /* No-matter success or fail, we free the mgmt packet. */
if (pPacket)
RTMPFreeNdisPacket(pAd, pPacket);
if ((RTMP_TEST_FLAG(pAd, (fRTMP_ADAPTER_RESET_IN_PROGRESS |
fRTMP_ADAPTER_HALT_IN_PROGRESS |
fRTMP_ADAPTER_NIC_NOT_EXIST)))) {
- // do nothing and return directly.
+ /* do nothing and return directly. */
} else {
- if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET) && ((pAd->bulkResetPipeid & BULKOUT_MGMT_RESET_FLAG) == BULKOUT_MGMT_RESET_FLAG)) { // For Mgmt Bulk-Out failed, ignore it now.
+ if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET) && ((pAd->bulkResetPipeid & BULKOUT_MGMT_RESET_FLAG) == BULKOUT_MGMT_RESET_FLAG)) { /* For Mgmt Bulk-Out failed, ignore it now. */
RTUSBEnqueueInternalCmd(pAd, CMDTHREAD_RESET_BULK_OUT,
NULL, 0);
} else {
- // Always call Bulk routine, even reset bulk.
- // The protectioon of rest bulk should be in BulkOut routine
+ /* Always call Bulk routine, even reset bulk. */
+ /* The protectioon of rest bulk should be in BulkOut routine */
if (pAd->MgmtRing.TxSwFreeIdx <
MGMT_RING_SIZE
/* pMLMEContext->bWaitingBulkOut == TRUE */ ) {
@@ -609,7 +609,7 @@ static void rtusb_ac3_dma_done_tasklet(unsigned long data)
if ((RTMP_TEST_FLAG(pAd, (fRTMP_ADAPTER_RESET_IN_PROGRESS |
fRTMP_ADAPTER_HALT_IN_PROGRESS |
fRTMP_ADAPTER_NIC_NOT_EXIST)))) {
- // do nothing and return directly.
+ /* do nothing and return directly. */
} else {
if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET)) {
RTUSBEnqueueInternalCmd(pAd, CMDTHREAD_RESET_BULK_OUT,
@@ -649,7 +649,7 @@ static void rtusb_ac2_dma_done_tasklet(unsigned long data)
if ((RTMP_TEST_FLAG(pAd, (fRTMP_ADAPTER_RESET_IN_PROGRESS |
fRTMP_ADAPTER_HALT_IN_PROGRESS |
fRTMP_ADAPTER_NIC_NOT_EXIST)))) {
- // do nothing and return directly.
+ /* do nothing and return directly. */
} else {
if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET)) {
RTUSBEnqueueInternalCmd(pAd, CMDTHREAD_RESET_BULK_OUT,
@@ -689,7 +689,7 @@ static void rtusb_ac1_dma_done_tasklet(unsigned long data)
if ((RTMP_TEST_FLAG(pAd, (fRTMP_ADAPTER_RESET_IN_PROGRESS |
fRTMP_ADAPTER_HALT_IN_PROGRESS |
fRTMP_ADAPTER_NIC_NOT_EXIST)))) {
- // do nothing and return directly.
+ /* do nothing and return directly. */
} else {
if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET)) {
RTUSBEnqueueInternalCmd(pAd, CMDTHREAD_RESET_BULK_OUT,
@@ -729,7 +729,7 @@ static void rtusb_ac0_dma_done_tasklet(unsigned long data)
if ((RTMP_TEST_FLAG(pAd, (fRTMP_ADAPTER_RESET_IN_PROGRESS |
fRTMP_ADAPTER_HALT_IN_PROGRESS |
fRTMP_ADAPTER_NIC_NOT_EXIST)))) {
- // do nothing and return directly.
+ /* do nothing and return directly. */
} else {
if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET)) {
RTUSBEnqueueInternalCmd(pAd, CMDTHREAD_RESET_BULK_OUT,
@@ -757,7 +757,7 @@ NDIS_STATUS RtmpNetTaskInit(IN RTMP_ADAPTER * pAd)
{
POS_COOKIE pObj = (POS_COOKIE) pAd->OS_Cookie;
- // Create receive tasklet
+ /* Create receive tasklet */
tasklet_init(&pObj->rx_done_task, rx_done_tasklet, (ULONG) pAd);
tasklet_init(&pObj->mgmt_dma_done_task, rtusb_mgmt_dma_done_tasklet,
(unsigned long)pAd);
diff --git a/drivers/staging/rt2860/sta_ioctl.c b/drivers/staging/rt2860/sta_ioctl.c
index dc1f600..d92a41e 100644
--- a/drivers/staging/rt2860/sta_ioctl.c
+++ b/drivers/staging/rt2860/sta_ioctl.c
@@ -61,15 +61,15 @@ typedef struct PACKED _RT_VERSION_INFO {
UINT DriverBuildDay;
} RT_VERSION_INFO, *PRT_VERSION_INFO;
-static __s32 ralinkrate[] = { 2, 4, 11, 22, // CCK
- 12, 18, 24, 36, 48, 72, 96, 108, // OFDM
- 13, 26, 39, 52, 78, 104, 117, 130, 26, 52, 78, 104, 156, 208, 234, 260, // 20MHz, 800ns GI, MCS: 0 ~ 15
- 39, 78, 117, 156, 234, 312, 351, 390, // 20MHz, 800ns GI, MCS: 16 ~ 23
- 27, 54, 81, 108, 162, 216, 243, 270, 54, 108, 162, 216, 324, 432, 486, 540, // 40MHz, 800ns GI, MCS: 0 ~ 15
- 81, 162, 243, 324, 486, 648, 729, 810, // 40MHz, 800ns GI, MCS: 16 ~ 23
- 14, 29, 43, 57, 87, 115, 130, 144, 29, 59, 87, 115, 173, 230, 260, 288, // 20MHz, 400ns GI, MCS: 0 ~ 15
- 43, 87, 130, 173, 260, 317, 390, 433, // 20MHz, 400ns GI, MCS: 16 ~ 23
- 30, 60, 90, 120, 180, 240, 270, 300, 60, 120, 180, 240, 360, 480, 540, 600, // 40MHz, 400ns GI, MCS: 0 ~ 15
+static __s32 ralinkrate[] = { 2, 4, 11, 22, /* CCK */
+ 12, 18, 24, 36, 48, 72, 96, 108, /* OFDM */
+ 13, 26, 39, 52, 78, 104, 117, 130, 26, 52, 78, 104, 156, 208, 234, 260, /* 20MHz, 800ns GI, MCS: 0 ~ 15 */
+ 39, 78, 117, 156, 234, 312, 351, 390, /* 20MHz, 800ns GI, MCS: 16 ~ 23 */
+ 27, 54, 81, 108, 162, 216, 243, 270, 54, 108, 162, 216, 324, 432, 486, 540, /* 40MHz, 800ns GI, MCS: 0 ~ 15 */
+ 81, 162, 243, 324, 486, 648, 729, 810, /* 40MHz, 800ns GI, MCS: 16 ~ 23 */
+ 14, 29, 43, 57, 87, 115, 130, 144, 29, 59, 87, 115, 173, 230, 260, 288, /* 20MHz, 400ns GI, MCS: 0 ~ 15 */
+ 43, 87, 130, 173, 260, 317, 390, 433, /* 20MHz, 400ns GI, MCS: 16 ~ 23 */
+ 30, 60, 90, 120, 180, 240, 270, 300, 60, 120, 180, 240, 360, 480, 540, 600, /* 40MHz, 400ns GI, MCS: 0 ~ 15 */
90, 180, 270, 360, 540, 720, 810, 900
};
@@ -93,7 +93,7 @@ VOID RTMPAddKey(IN PRTMP_ADAPTER pAd, IN PNDIS_802_11_KEY pKey)
pKey->KeyLength);
goto end;
}
- // Update PTK
+ /* Update PTK */
NdisZeroMemory(&pAd->SharedKey[BSS0][0],
sizeof(CIPHER_KEY));
pAd->SharedKey[BSS0][0].KeyLen = LEN_TKIP_EK;
@@ -119,7 +119,7 @@ VOID RTMPAddKey(IN PRTMP_ADAPTER pAd, IN PNDIS_802_11_KEY pKey)
LEN_TKIP_RXMICK);
}
- // Decide its ChiperAlg
+ /* Decide its ChiperAlg */
if (pAd->StaCfg.PairCipher ==
Ndis802_11Encryption2Enabled)
pAd->SharedKey[BSS0][0].CipherAlg = CIPHER_TKIP;
@@ -129,7 +129,7 @@ VOID RTMPAddKey(IN PRTMP_ADAPTER pAd, IN PNDIS_802_11_KEY pKey)
else
pAd->SharedKey[BSS0][0].CipherAlg = CIPHER_NONE;
- // Update these related information to MAC_TABLE_ENTRY
+ /* Update these related information to MAC_TABLE_ENTRY */
pEntry = &pAd->MacTab.Content[BSSID_WCID];
NdisMoveMemory(pEntry->PairwiseKey.Key,
pAd->SharedKey[BSS0][0].Key,
@@ -143,7 +143,7 @@ VOID RTMPAddKey(IN PRTMP_ADAPTER pAd, IN PNDIS_802_11_KEY pKey)
pEntry->PairwiseKey.CipherAlg =
pAd->SharedKey[BSS0][0].CipherAlg;
- // Update pairwise key information to ASIC Shared Key Table
+ /* Update pairwise key information to ASIC Shared Key Table */
AsicAddSharedKeyEntry(pAd,
BSS0,
0,
@@ -152,7 +152,7 @@ VOID RTMPAddKey(IN PRTMP_ADAPTER pAd, IN PNDIS_802_11_KEY pKey)
pAd->SharedKey[BSS0][0].TxMic,
pAd->SharedKey[BSS0][0].RxMic);
- // Update ASIC WCID attribute table and IVEIV table
+ /* Update ASIC WCID attribute table and IVEIV table */
RTMPAddWcidAttributeEntry(pAd,
BSS0,
0,
@@ -160,16 +160,16 @@ VOID RTMPAddKey(IN PRTMP_ADAPTER pAd, IN PNDIS_802_11_KEY pKey)
CipherAlg, pEntry);
if (pAd->StaCfg.AuthMode >= Ndis802_11AuthModeWPA2) {
- // set 802.1x port control
- //pAd->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED;
+ /* set 802.1x port control */
+ /*pAd->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED; */
STA_PORT_SECURED(pAd);
- // Indicate Connected for GUI
+ /* Indicate Connected for GUI */
pAd->IndicateMediaState =
NdisMediaStateConnected;
}
} else {
- // Update GTK
+ /* Update GTK */
pAd->StaCfg.DefaultKeyId = (pKey->KeyIndex & 0xFF);
NdisZeroMemory(&pAd->
SharedKey[BSS0][pAd->StaCfg.
@@ -213,7 +213,7 @@ VOID RTMPAddKey(IN PRTMP_ADAPTER pAd, IN PNDIS_802_11_KEY pKey)
LEN_TKIP_RXMICK);
}
- // Update Shared Key CipherAlg
+ /* Update Shared Key CipherAlg */
pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].
CipherAlg = CIPHER_NONE;
if (pAd->StaCfg.GroupCipher ==
@@ -225,7 +225,7 @@ VOID RTMPAddKey(IN PRTMP_ADAPTER pAd, IN PNDIS_802_11_KEY pKey)
pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].
CipherAlg = CIPHER_AES;
- // Update group key information to ASIC Shared Key Table
+ /* Update group key information to ASIC Shared Key Table */
AsicAddSharedKeyEntry(pAd,
BSS0,
pAd->StaCfg.DefaultKeyId,
@@ -242,7 +242,7 @@ VOID RTMPAddKey(IN PRTMP_ADAPTER pAd, IN PNDIS_802_11_KEY pKey)
DefaultKeyId].
RxMic);
- // Update ASIC WCID attribute table and IVEIV table
+ /* Update ASIC WCID attribute table and IVEIV table */
RTMPAddWcidAttributeEntry(pAd,
BSS0,
pAd->StaCfg.DefaultKeyId,
@@ -251,14 +251,14 @@ VOID RTMPAddKey(IN PRTMP_ADAPTER pAd, IN PNDIS_802_11_KEY pKey)
DefaultKeyId].
CipherAlg, NULL);
- // set 802.1x port control
- //pAd->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED;
+ /* set 802.1x port control */
+ /*pAd->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED; */
STA_PORT_SECURED(pAd);
- // Indicate Connected for GUI
+ /* Indicate Connected for GUI */
pAd->IndicateMediaState = NdisMediaStateConnected;
}
- } else // dynamic WEP from wpa_supplicant
+ } else /* dynamic WEP from wpa_supplicant */
{
UCHAR CipherAlg;
PUCHAR Key;
@@ -269,7 +269,7 @@ VOID RTMPAddKey(IN PRTMP_ADAPTER pAd, IN PNDIS_802_11_KEY pKey)
KeyIdx = pKey->KeyIndex & 0x0fffffff;
if (KeyIdx < 4) {
- // it is a default shared key, for Pairwise key setting
+ /* it is a default shared key, for Pairwise key setting */
if (pKey->KeyIndex & 0x80000000) {
pEntry = MacTableLookup(pAd, pKey->BSSID);
@@ -277,14 +277,14 @@ VOID RTMPAddKey(IN PRTMP_ADAPTER pAd, IN PNDIS_802_11_KEY pKey)
DBGPRINT(RT_DEBUG_TRACE,
("RTMPAddKey: Set Pair-wise Key\n"));
- // set key material and key length
+ /* set key material and key length */
pEntry->PairwiseKey.KeyLen =
(UCHAR) pKey->KeyLength;
NdisMoveMemory(pEntry->PairwiseKey.Key,
&pKey->KeyMaterial,
pKey->KeyLength);
- // set Cipher type
+ /* set Cipher type */
if (pKey->KeyLength == 5)
pEntry->PairwiseKey.CipherAlg =
CIPHER_WEP64;
@@ -292,7 +292,7 @@ VOID RTMPAddKey(IN PRTMP_ADAPTER pAd, IN PNDIS_802_11_KEY pKey)
pEntry->PairwiseKey.CipherAlg =
CIPHER_WEP128;
- // Add Pair-wise key to Asic
+ /* Add Pair-wise key to Asic */
AsicAddPairwiseKeyEntry(pAd,
pEntry->Addr,
(UCHAR) pEntry->
@@ -300,8 +300,8 @@ VOID RTMPAddKey(IN PRTMP_ADAPTER pAd, IN PNDIS_802_11_KEY pKey)
&pEntry->
PairwiseKey);
- // update WCID attribute table and IVEIV table for this entry
- RTMPAddWcidAttributeEntry(pAd, BSS0, KeyIdx, // The value may be not zero
+ /* update WCID attribute table and IVEIV table for this entry */
+ RTMPAddWcidAttributeEntry(pAd, BSS0, KeyIdx, /* The value may be not zero */
pEntry->
PairwiseKey.
CipherAlg,
@@ -309,17 +309,17 @@ VOID RTMPAddKey(IN PRTMP_ADAPTER pAd, IN PNDIS_802_11_KEY pKey)
}
} else {
- // Default key for tx (shared key)
+ /* Default key for tx (shared key) */
pAd->StaCfg.DefaultKeyId = (UCHAR) KeyIdx;
- // set key material and key length
+ /* set key material and key length */
pAd->SharedKey[BSS0][KeyIdx].KeyLen =
(UCHAR) pKey->KeyLength;
NdisMoveMemory(pAd->SharedKey[BSS0][KeyIdx].Key,
&pKey->KeyMaterial,
pKey->KeyLength);
- // Set Ciper type
+ /* Set Ciper type */
if (pKey->KeyLength == 5)
pAd->SharedKey[BSS0][KeyIdx].CipherAlg =
CIPHER_WEP64;
@@ -331,12 +331,12 @@ VOID RTMPAddKey(IN PRTMP_ADAPTER pAd, IN PNDIS_802_11_KEY pKey)
pAd->SharedKey[BSS0][KeyIdx].CipherAlg;
Key = pAd->SharedKey[BSS0][KeyIdx].Key;
- // Set Group key material to Asic
+ /* Set Group key material to Asic */
AsicAddSharedKeyEntry(pAd, BSS0, KeyIdx,
CipherAlg, Key, NULL,
NULL);
- // Update WCID attribute table and IVEIV table for this group key table
+ /* Update WCID attribute table and IVEIV table for this group key table */
RTMPAddWcidAttributeEntry(pAd, BSS0, KeyIdx,
CipherAlg, NULL);
@@ -364,8 +364,8 @@ rt_ioctl_giwname(struct net_device *dev,
struct iw_request_info *info, char *name, char *extra)
{
strncpy(name, "Ralink STA", IFNAMSIZ);
- // RT2870 2.1.0.0 uses "RT2870 Wireless"
- // RT3090 2.1.0.0 uses "RT2860 Wireless"
+ /* RT2870 2.1.0.0 uses "RT2870 Wireless" */
+ /* RT3090 2.1.0.0 uses "RT2860 Wireless" */
return 0;
}
@@ -378,7 +378,7 @@ int rt_ioctl_siwfreq(struct net_device *dev,
GET_PAD_FROM_NET_DEV(pAdapter, dev);
- //check if the interface is down
+ /*check if the interface is down */
if (!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE)) {
DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
return -ENETDOWN;
@@ -388,9 +388,9 @@ int rt_ioctl_siwfreq(struct net_device *dev,
return -EINVAL;
if ((freq->e == 0) && (freq->m <= 1000))
- chan = freq->m; // Setting by channel number
+ chan = freq->m; /* Setting by channel number */
else
- MAP_KHZ_TO_CHANNEL_ID((freq->m / 100), chan); // Setting by frequency - search the table , like 2.412G, 2.422G,
+ MAP_KHZ_TO_CHANNEL_ID((freq->m / 100), chan); /* Setting by frequency - search the table , like 2.412G, 2.422G, */
if (ChannelSanity(pAdapter, chan) == TRUE) {
pAdapter->CommonCfg.Channel = chan;
@@ -430,7 +430,7 @@ int rt_ioctl_siwmode(struct net_device *dev,
GET_PAD_FROM_NET_DEV(pAdapter, dev);
- //check if the interface is down
+ /*check if the interface is down */
if (!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE)) {
DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
return -ENETDOWN;
@@ -453,7 +453,7 @@ int rt_ioctl_siwmode(struct net_device *dev,
return -EINVAL;
}
- // Reset Ralink supplicant to not use, it will be set to start when UI set PMK key
+ /* Reset Ralink supplicant to not use, it will be set to start when UI set PMK key */
pAdapter->StaCfg.WpaState = SS_NOTUSE;
return 0;
@@ -486,7 +486,7 @@ int rt_ioctl_siwsens(struct net_device *dev,
GET_PAD_FROM_NET_DEV(pAdapter, dev);
- //check if the interface is down
+ /*check if the interface is down */
if (!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE)) {
DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
return -ENETDOWN;
@@ -591,7 +591,7 @@ int rt_ioctl_siwap(struct net_device *dev,
GET_PAD_FROM_NET_DEV(pAdapter, dev);
- //check if the interface is down
+ /*check if the interface is down */
if (!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE)) {
DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
return -ENETDOWN;
@@ -602,10 +602,10 @@ int rt_ioctl_siwap(struct net_device *dev,
DBGPRINT(RT_DEBUG_TRACE,
("!!! MLME busy, reset MLME state machine !!!\n"));
}
- // tell CNTL state machine to call NdisMSetInformationComplete() after completing
- // this request, because this request is initiated by NDIS.
+ /* tell CNTL state machine to call NdisMSetInformationComplete() after completing */
+ /* this request, because this request is initiated by NDIS. */
pAdapter->MlmeAux.CurrReqIsFromNdis = FALSE;
- // Prevent to connect AP again in STAMlmePeriodicExec
+ /* Prevent to connect AP again in STAMlmePeriodicExec */
pAdapter->MlmeAux.AutoReconnectSsidLen = 32;
memset(Bssid, 0, MAC_ADDR_LEN);
@@ -634,7 +634,7 @@ int rt_ioctl_giwap(struct net_device *dev,
ap_addr->sa_family = ARPHRD_ETHER;
memcpy(ap_addr->sa_data, &pAdapter->CommonCfg.Bssid, ETH_ALEN);
}
- // Add for RT2870
+ /* Add for RT2870 */
else if (pAdapter->StaCfg.WpaSupplicantUP != WPA_SUPPLICANT_DISABLE) {
ap_addr->sa_family = ARPHRD_ETHER;
memcpy(ap_addr->sa_data, &pAdapter->MlmeAux.Bssid, ETH_ALEN);
@@ -667,12 +667,12 @@ static void set_quality(PRTMP_ADAPTER pAdapter,
{
__u8 ChannelQuality;
- // Normalize Rssi
+ /* Normalize Rssi */
if (rssi >= -50)
ChannelQuality = 100;
- else if (rssi >= -80) // between -50 ~ -80dbm
+ else if (rssi >= -80) /* between -50 ~ -80dbm */
ChannelQuality = (__u8) (24 + ((rssi + 80) * 26) / 10);
- else if (rssi >= -90) // between -80 ~ -90dbm
+ else if (rssi >= -90) /* between -80 ~ -90dbm */
ChannelQuality = (__u8) ((rssi + 90) * 26) / 10;
else
ChannelQuality = 0;
@@ -680,7 +680,7 @@ static void set_quality(PRTMP_ADAPTER pAdapter,
iq->qual = (__u8) ChannelQuality;
iq->level = (__u8) (rssi);
- iq->noise = (pAdapter->BbpWriteLatch[66] > pAdapter->BbpTuning.FalseCcaUpperThreshold) ? ((__u8) pAdapter->BbpTuning.FalseCcaUpperThreshold) : ((__u8) pAdapter->BbpWriteLatch[66]); // noise level (dBm)
+ iq->noise = (pAdapter->BbpWriteLatch[66] > pAdapter->BbpTuning.FalseCcaUpperThreshold) ? ((__u8) pAdapter->BbpTuning.FalseCcaUpperThreshold) : ((__u8) pAdapter->BbpWriteLatch[66]); /* noise level (dBm) */
iq->noise += 256 - 143;
iq->updated = pAdapter->iw_stats.qual.updated;
}
@@ -697,12 +697,12 @@ int rt_ioctl_iwaplist(struct net_device *dev,
GET_PAD_FROM_NET_DEV(pAdapter, dev);
- //check if the interface is down
+ /*check if the interface is down */
if (!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE)) {
DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
data->length = 0;
return 0;
- //return -ENETDOWN;
+ /*return -ENETDOWN; */
}
for (i = 0; i < IW_MAX_AP; i++) {
@@ -733,7 +733,7 @@ int rt_ioctl_siwscan(struct net_device *dev,
GET_PAD_FROM_NET_DEV(pAdapter, dev);
- //check if the interface is down
+ /*check if the interface is down */
if (!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE)) {
DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
return -ENETDOWN;
@@ -781,10 +781,10 @@ int rt_ioctl_siwscan(struct net_device *dev,
DBGPRINT(RT_DEBUG_TRACE,
("!!! MLME busy, reset MLME state machine !!!\n"));
}
- // tell CNTL state machine to call NdisMSetInformationComplete() after completing
- // this request, because this request is initiated by NDIS.
+ /* tell CNTL state machine to call NdisMSetInformationComplete() after completing */
+ /* this request, because this request is initiated by NDIS. */
pAdapter->MlmeAux.CurrReqIsFromNdis = FALSE;
- // Reset allowed scan retries
+ /* Reset allowed scan retries */
pAdapter->StaCfg.ScanCnt = 0;
pAdapter->StaCfg.LastScanTime = Now;
@@ -837,8 +837,8 @@ int rt_ioctl_giwscan(struct net_device *dev,
if (current_ev >= end_buf) {
return -E2BIG;
}
- //MAC address
- //================================
+ /*MAC address */
+ /*================================ */
memset(&iwe, 0, sizeof(iwe));
iwe.cmd = SIOCGIWAP;
iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
@@ -935,8 +935,8 @@ int rt_ioctl_giwscan(struct net_device *dev,
if (current_ev == previous_ev)
return -E2BIG;
- //ESSID
- //================================
+ /*ESSID */
+ /*================================ */
memset(&iwe, 0, sizeof(iwe));
iwe.cmd = SIOCGIWESSID;
iwe.u.data.length = pAdapter->ScanTab.BssEntry[i].SsidLen;
@@ -950,8 +950,8 @@ int rt_ioctl_giwscan(struct net_device *dev,
if (current_ev == previous_ev)
return -E2BIG;
- //Network Type
- //================================
+ /*Network Type */
+ /*================================ */
memset(&iwe, 0, sizeof(iwe));
iwe.cmd = SIOCGIWMODE;
if (pAdapter->ScanTab.BssEntry[i].BssType == Ndis802_11IBSS) {
@@ -971,8 +971,8 @@ int rt_ioctl_giwscan(struct net_device *dev,
if (current_ev == previous_ev)
return -E2BIG;
- //Channel and Frequency
- //================================
+ /*Channel and Frequency */
+ /*================================ */
memset(&iwe, 0, sizeof(iwe));
iwe.cmd = SIOCGIWFREQ;
if (INFRA_ON(pAdapter) || ADHOC_ON(pAdapter))
@@ -989,8 +989,8 @@ int rt_ioctl_giwscan(struct net_device *dev,
if (current_ev == previous_ev)
return -E2BIG;
- //Add quality statistics
- //================================
+ /*Add quality statistics */
+ /*================================ */
memset(&iwe, 0, sizeof(iwe));
iwe.cmd = IWEVQUAL;
iwe.u.qual.level = 0;
@@ -1003,8 +1003,8 @@ int rt_ioctl_giwscan(struct net_device *dev,
if (current_ev == previous_ev)
return -E2BIG;
- //Encyption key
- //================================
+ /*Encyption key */
+ /*================================ */
memset(&iwe, 0, sizeof(iwe));
iwe.cmd = SIOCGIWENCODE;
if (CAP_IS_PRIVACY_ON
@@ -1024,8 +1024,8 @@ int rt_ioctl_giwscan(struct net_device *dev,
if (current_ev == previous_ev)
return -E2BIG;
- //Bit Rate
- //================================
+ /*Bit Rate */
+ /*================================ */
if (pAdapter->ScanTab.BssEntry[i].SupRateLen) {
UCHAR tmpRate =
pAdapter->ScanTab.BssEntry[i].SupRate[pAdapter->
@@ -1083,7 +1083,7 @@ int rt_ioctl_giwscan(struct net_device *dev,
else
return -E2BIG;
}
- //WPA IE
+ /*WPA IE */
if (pAdapter->ScanTab.BssEntry[i].WpaIE.IELen > 0) {
memset(&iwe, 0, sizeof(iwe));
memset(&custom[0], 0, MAX_CUSTOM_LEN);
@@ -1099,7 +1099,7 @@ int rt_ioctl_giwscan(struct net_device *dev,
if (current_ev == previous_ev)
return -E2BIG;
}
- //WPA2 IE
+ /*WPA2 IE */
if (pAdapter->ScanTab.BssEntry[i].RsnIE.IELen > 0) {
memset(&iwe, 0, sizeof(iwe));
memset(&custom[0], 0, MAX_CUSTOM_LEN);
@@ -1133,7 +1133,7 @@ int rt_ioctl_siwessid(struct net_device *dev,
GET_PAD_FROM_NET_DEV(pAdapter, dev);
- //check if the interface is down
+ /*check if the interface is down */
if (!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE)) {
DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
return -ENETDOWN;
@@ -1142,7 +1142,7 @@ int rt_ioctl_siwessid(struct net_device *dev,
if (data->flags) {
PSTRING pSsidString = NULL;
- // Includes null character.
+ /* Includes null character. */
if (data->length > (IW_ESSID_MAX_SIZE + 1))
return -E2BIG;
@@ -1155,7 +1155,7 @@ int rt_ioctl_siwessid(struct net_device *dev,
} else
return -ENOMEM;
} else {
- // ANY ssid
+ /* ANY ssid */
if (Set_SSID_Proc(pAdapter, "") == FALSE)
return -EINVAL;
}
@@ -1183,14 +1183,14 @@ int rt_ioctl_giwessid(struct net_device *dev,
pAdapter->CommonCfg.SsidLen);
}
#ifdef RTMP_MAC_USB
- // Add for RT2870
+ /* Add for RT2870 */
else if (pAdapter->StaCfg.WpaSupplicantUP != WPA_SUPPLICANT_DISABLE) {
data->length = pAdapter->CommonCfg.SsidLen;
memcpy(essid, pAdapter->CommonCfg.Ssid,
pAdapter->CommonCfg.SsidLen);
}
-#endif // RTMP_MAC_USB //
- else { //the ANY ssid was specified
+#endif /* RTMP_MAC_USB // */
+ else { /*the ANY ssid was specified */
data->length = 0;
DBGPRINT(RT_DEBUG_TRACE,
("MediaState is not connected, ess\n"));
@@ -1208,7 +1208,7 @@ int rt_ioctl_siwnickn(struct net_device *dev,
GET_PAD_FROM_NET_DEV(pAdapter, dev);
- //check if the interface is down
+ /*check if the interface is down */
if (!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE)) {
DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
return -ENETDOWN;
@@ -1249,7 +1249,7 @@ int rt_ioctl_siwrts(struct net_device *dev,
GET_PAD_FROM_NET_DEV(pAdapter, dev);
- //check if the interface is down
+ /*check if the interface is down */
if (!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE)) {
DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
return -ENETDOWN;
@@ -1278,7 +1278,7 @@ int rt_ioctl_giwrts(struct net_device *dev,
GET_PAD_FROM_NET_DEV(pAdapter, dev);
- //check if the interface is down
+ /*check if the interface is down */
if (!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE)) {
DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
return -ENETDOWN;
@@ -1300,7 +1300,7 @@ int rt_ioctl_siwfrag(struct net_device *dev,
GET_PAD_FROM_NET_DEV(pAdapter, dev);
- //check if the interface is down
+ /*check if the interface is down */
if (!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE)) {
DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
return -ENETDOWN;
@@ -1328,7 +1328,7 @@ int rt_ioctl_giwfrag(struct net_device *dev,
GET_PAD_FROM_NET_DEV(pAdapter, dev);
- //check if the interface is down
+ /*check if the interface is down */
if (!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE)) {
DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
return -ENETDOWN;
@@ -1351,7 +1351,7 @@ int rt_ioctl_siwencode(struct net_device *dev,
GET_PAD_FROM_NET_DEV(pAdapter, dev);
- //check if the interface is down
+ /*check if the interface is down */
if (!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE)) {
DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
return -ENETDOWN;
@@ -1366,7 +1366,7 @@ int rt_ioctl_siwencode(struct net_device *dev,
goto done;
} else if (erq->flags & IW_ENCODE_RESTRICTED
|| erq->flags & IW_ENCODE_OPEN) {
- //pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED;
+ /*pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED; */
STA_PORT_SECURED(pAdapter);
pAdapter->StaCfg.PairCipher = Ndis802_11WEPEnabled;
pAdapter->StaCfg.GroupCipher = Ndis802_11WEPEnabled;
@@ -1390,7 +1390,7 @@ int rt_ioctl_siwencode(struct net_device *dev,
("==>rt_ioctl_siwencode::Wrong keyIdx=%d! Using default key instead (%d)\n",
keyIdx, pAdapter->StaCfg.DefaultKeyId));
- //Using default key
+ /*Using default key */
keyIdx = pAdapter->StaCfg.DefaultKeyId;
} else
pAdapter->StaCfg.DefaultKeyId = keyIdx;
@@ -1455,7 +1455,7 @@ rt_ioctl_giwencode(struct net_device *dev,
GET_PAD_FROM_NET_DEV(pAdapter, dev);
- //check if the interface is down
+ /*check if the interface is down */
if (!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE)) {
DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
return -ENETDOWN;
@@ -1469,14 +1469,14 @@ rt_ioctl_giwencode(struct net_device *dev,
erq->length = 0;
erq->flags = IW_ENCODE_DISABLED;
} else if ((kid > 0) && (kid <= 4)) {
- // copy wep key
+ /* copy wep key */
erq->flags = kid; /* NB: base 1 */
if (erq->length > pAdapter->SharedKey[BSS0][kid - 1].KeyLen)
erq->length = pAdapter->SharedKey[BSS0][kid - 1].KeyLen;
memcpy(key, pAdapter->SharedKey[BSS0][kid - 1].Key,
erq->length);
- //if ((kid == pAdapter->PortCfg.DefaultKeyId))
- //erq->flags |= IW_ENCODE_ENABLED; /* XXX */
+ /*if ((kid == pAdapter->PortCfg.DefaultKeyId)) */
+ /*erq->flags |= IW_ENCODE_ENABLED; */ /* XXX */
if (pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeShared)
erq->flags |= IW_ENCODE_RESTRICTED; /* XXX */
else
@@ -1493,7 +1493,7 @@ rt_ioctl_giwencode(struct net_device *dev,
memcpy(key,
pAdapter->SharedKey[BSS0][pAdapter->StaCfg.DefaultKeyId].
Key, erq->length);
- // copy default key ID
+ /* copy default key ID */
if (pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeShared)
erq->flags |= IW_ENCODE_RESTRICTED; /* XXX */
else
@@ -1595,7 +1595,7 @@ int rt_ioctl_siwmlme(struct net_device *dev,
pAd->Mlme.AssocMachine.CurrState = ASSOC_IDLE;
}
break;
-#endif // IW_MLME_DEAUTH //
+#endif /* IW_MLME_DEAUTH // */
#ifdef IW_MLME_DISASSOC
case IW_MLME_DISASSOC:
DBGPRINT(RT_DEBUG_TRACE,
@@ -1612,7 +1612,7 @@ int rt_ioctl_siwmlme(struct net_device *dev,
pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_DISASSOC;
MlmeDisassocReqAction(pAd, &MsgElem);
break;
-#endif // IW_MLME_DISASSOC //
+#endif /* IW_MLME_DISASSOC // */
default:
DBGPRINT(RT_DEBUG_TRACE,
("====> %s - Unknow Command\n", __func__));
@@ -1631,7 +1631,7 @@ int rt_ioctl_siwauth(struct net_device *dev,
GET_PAD_FROM_NET_DEV(pAdapter, dev);
- //check if the interface is down
+ /*check if the interface is down */
if (!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE)) {
DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
return -ENETDOWN;
@@ -1712,10 +1712,10 @@ int rt_ioctl_siwauth(struct net_device *dev,
Ndis802_11AuthModeWPA2;
pAdapter->StaCfg.IEEE8021X = FALSE;
} else
- // WEP 1x
+ /* WEP 1x */
pAdapter->StaCfg.IEEE8021X = TRUE;
} else if (param->value == 0) {
- //pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED;
+ /*pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED; */
STA_PORT_SECURED(pAdapter);
}
DBGPRINT(RT_DEBUG_TRACE,
@@ -1742,7 +1742,7 @@ int rt_ioctl_siwauth(struct net_device *dev,
pAdapter->StaCfg.PortSecured =
WPA_802_1X_PORT_NOT_SECURED;
else {
- //pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED;
+ /*pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED; */
STA_PORT_SECURED(pAdapter);
}
DBGPRINT(RT_DEBUG_TRACE,
@@ -1781,7 +1781,7 @@ int rt_ioctl_giwauth(struct net_device *dev,
GET_PAD_FROM_NET_DEV(pAdapter, dev);
- //check if the interface is down
+ /*check if the interface is down */
if (!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE)) {
DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
return -ENETDOWN;
@@ -1831,7 +1831,7 @@ void fnSetCipherKey(IN PRTMP_ADAPTER pAdapter,
LEN_TKIP_RXMICK);
pAdapter->SharedKey[BSS0][keyIdx].CipherAlg = CipherAlg;
- // Update group key information to ASIC Shared Key Table
+ /* Update group key information to ASIC Shared Key Table */
AsicAddSharedKeyEntry(pAdapter,
BSS0,
keyIdx,
@@ -1841,14 +1841,14 @@ void fnSetCipherKey(IN PRTMP_ADAPTER pAdapter,
pAdapter->SharedKey[BSS0][keyIdx].RxMic);
if (bGTK)
- // Update ASIC WCID attribute table and IVEIV table
+ /* Update ASIC WCID attribute table and IVEIV table */
RTMPAddWcidAttributeEntry(pAdapter,
BSS0,
keyIdx,
pAdapter->SharedKey[BSS0][keyIdx].
CipherAlg, NULL);
else
- // Update ASIC WCID attribute table and IVEIV table
+ /* Update ASIC WCID attribute table and IVEIV table */
RTMPAddWcidAttributeEntry(pAdapter,
BSS0,
keyIdx,
@@ -1869,7 +1869,7 @@ int rt_ioctl_siwencodeext(struct net_device *dev,
GET_PAD_FROM_NET_DEV(pAdapter, dev);
- //check if the interface is down
+ /*check if the interface is down */
if (!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE)) {
DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
return -ENETDOWN;
@@ -1877,7 +1877,7 @@ int rt_ioctl_siwencodeext(struct net_device *dev,
if (encoding->flags & IW_ENCODE_DISABLED) {
keyIdx = (encoding->flags & IW_ENCODE_INDEX) - 1;
- // set BSSID wcid entry of the Pair-wise Key table as no-security mode
+ /* set BSSID wcid entry of the Pair-wise Key table as no-security mode */
AsicRemovePairwiseKeyEntry(pAdapter, BSS0, BSSID_WCID);
pAdapter->SharedKey[BSS0][keyIdx].KeyLen = 0;
pAdapter->SharedKey[BSS0][keyIdx].CipherAlg = CIPHER_NONE;
@@ -1888,7 +1888,7 @@ int rt_ioctl_siwencodeext(struct net_device *dev,
("%s::Remove all keys!(encoding->flags = %x)\n",
__func__, encoding->flags));
} else {
- // Get Key Index and convet to our own defined key index
+ /* Get Key Index and convet to our own defined key index */
keyIdx = (encoding->flags & IW_ENCODE_INDEX) - 1;
if ((keyIdx < 0) || (keyIdx >= NR_WEP_KEYS))
return -EINVAL;
@@ -1930,7 +1930,7 @@ int rt_ioctl_siwencodeext(struct net_device *dev,
Ndis802_11GroupWEP40Enabled
|| pAdapter->StaCfg.GroupCipher ==
Ndis802_11GroupWEP104Enabled) {
- // Set Group key material to Asic
+ /* Set Group key material to Asic */
AsicAddSharedKeyEntry(pAdapter, BSS0, keyIdx,
pAdapter->
SharedKey[BSS0][keyIdx].
@@ -1939,7 +1939,7 @@ int rt_ioctl_siwencodeext(struct net_device *dev,
SharedKey[BSS0][keyIdx].
Key, NULL, NULL);
- // Update WCID attribute table and IVEIV table for this group key table
+ /* Update WCID attribute table and IVEIV table for this group key table */
RTMPAddWcidAttributeEntry(pAdapter, BSS0,
keyIdx,
pAdapter->
@@ -1949,7 +1949,7 @@ int rt_ioctl_siwencodeext(struct net_device *dev,
STA_PORT_SECURED(pAdapter);
- // Indicate Connected for GUI
+ /* Indicate Connected for GUI */
pAdapter->IndicateMediaState =
NdisMediaStateConnected;
}
@@ -1964,7 +1964,7 @@ int rt_ioctl_siwencodeext(struct net_device *dev,
CIPHER_TKIP, FALSE, ext);
if (pAdapter->StaCfg.AuthMode >=
Ndis802_11AuthModeWPA2) {
- //pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED;
+ /*pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED; */
STA_PORT_SECURED(pAdapter);
pAdapter->IndicateMediaState =
NdisMediaStateConnected;
@@ -1975,8 +1975,8 @@ int rt_ioctl_siwencodeext(struct net_device *dev,
fnSetCipherKey(pAdapter, keyIdx,
CIPHER_TKIP, TRUE, ext);
- // set 802.1x port control
- //pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED;
+ /* set 802.1x port control */
+ /*pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED; */
STA_PORT_SECURED(pAdapter);
pAdapter->IndicateMediaState =
NdisMediaStateConnected;
@@ -1990,7 +1990,7 @@ int rt_ioctl_siwencodeext(struct net_device *dev,
FALSE, ext);
if (pAdapter->StaCfg.AuthMode >=
Ndis802_11AuthModeWPA2)
- //pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED;
+ /*pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED; */
STA_PORT_SECURED(pAdapter);
pAdapter->IndicateMediaState =
NdisMediaStateConnected;
@@ -1998,8 +1998,8 @@ int rt_ioctl_siwencodeext(struct net_device *dev,
fnSetCipherKey(pAdapter, keyIdx, CIPHER_AES,
TRUE, ext);
- // set 802.1x port control
- //pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED;
+ /* set 802.1x port control */
+ /*pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED; */
STA_PORT_SECURED(pAdapter);
pAdapter->IndicateMediaState =
NdisMediaStateConnected;
@@ -2142,7 +2142,7 @@ int rt_ioctl_giwgenie(struct net_device *dev,
} else {
UCHAR RSNIe = IE_WPA;
- if (wrqu->data.length < (pAd->StaCfg.RSNIE_Len + 2)) // ID, Len
+ if (wrqu->data.length < (pAd->StaCfg.RSNIE_Len + 2)) /* ID, Len */
return -E2BIG;
wrqu->data.length = pAd->StaCfg.RSNIE_Len + 2;
@@ -2183,7 +2183,7 @@ int rt_ioctl_siwpmksa(struct net_device *dev,
case IW_PMKSA_REMOVE:
for (CachedIdx = 0; CachedIdx < pAd->StaCfg.SavedPMKNum;
CachedIdx++) {
- // compare the BSSID
+ /* compare the BSSID */
if (NdisEqualMemory
(pPmksa->bssid.sa_data,
pAd->StaCfg.SavedPMK[CachedIdx].BSSID,
@@ -2219,7 +2219,7 @@ int rt_ioctl_siwpmksa(struct net_device *dev,
case IW_PMKSA_ADD:
for (CachedIdx = 0; CachedIdx < pAd->StaCfg.SavedPMKNum;
CachedIdx++) {
- // compare the BSSID
+ /* compare the BSSID */
if (NdisEqualMemory
(pPmksa->bssid.sa_data,
pAd->StaCfg.SavedPMK[CachedIdx].BSSID,
@@ -2227,7 +2227,7 @@ int rt_ioctl_siwpmksa(struct net_device *dev,
break;
}
- // Found, replace it
+ /* Found, replace it */
if (CachedIdx < PMKID_NO) {
DBGPRINT(RT_DEBUG_OFF,
("Update PMKID, idx = %d\n", CachedIdx));
@@ -2238,9 +2238,9 @@ int rt_ioctl_siwpmksa(struct net_device *dev,
PMKID[0], pPmksa->pmkid, 16);
pAd->StaCfg.SavedPMKNum++;
}
- // Not found, replace the last one
+ /* Not found, replace the last one */
else {
- // Randomly replace one
+ /* Randomly replace one */
CachedIdx = (pPmksa->bssid.sa_data[5] % PMKID_NO);
DBGPRINT(RT_DEBUG_OFF,
("Update PMKID, idx = %d\n", CachedIdx));
@@ -2272,7 +2272,7 @@ int rt_ioctl_siwrate(struct net_device *dev,
GET_PAD_FROM_NET_DEV(pAd, dev);
- //check if the interface is down
+ /*check if the interface is down */
if (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE)) {
DBGPRINT(RT_DEBUG_TRACE,
("rt_ioctl_siwrate::Network is down!\n"));
@@ -2285,7 +2285,7 @@ int rt_ioctl_siwrate(struct net_device *dev,
rate = X, fixed = 1 => (fixed rate X)
*/
if (rate == -1) {
- //Auto Rate
+ /*Auto Rate */
pAd->StaCfg.DesiredTransmitSetting.field.MCS = MCS_AUTO;
pAd->StaCfg.bAutoTxRateSwitch = TRUE;
if ((pAd->CommonCfg.PhyMode <= PHY_11G) ||
@@ -2311,7 +2311,7 @@ int rt_ioctl_siwrate(struct net_device *dev,
pAd->StaCfg.DesiredTransmitSetting.field.
MCS));
} else {
- // TODO: rate = X, fixed = 0 => (rates <= X)
+ /* TODO: rate = X, fixed = 0 => (rates <= X) */
return -EOPNOTSUPP;
}
}
@@ -2342,7 +2342,7 @@ int rt_ioctl_giwrate(struct net_device *dev,
GET_PAD_FROM_NET_DEV(pAd, dev);
rate_count = sizeof(ralinkrate) / sizeof(__s32);
- //check if the interface is down
+ /*check if the interface is down */
if (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE)) {
DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
return -ENETDOWN;
@@ -2359,7 +2359,7 @@ int rt_ioctl_giwrate(struct net_device *dev,
pAd->MacTab.Content[BSSID_WCID].HTPhyMode.word;
if (ht_setting.field.MODE >= MODE_HTMIX) {
-// rate_index = 12 + ((UCHAR)ht_setting.field.BW *16) + ((UCHAR)ht_setting.field.ShortGI *32) + ((UCHAR)ht_setting.field.MCS);
+/* rate_index = 12 + ((UCHAR)ht_setting.field.BW *16) + ((UCHAR)ht_setting.field.ShortGI *32) + ((UCHAR)ht_setting.field.MCS); */
rate_index =
12 + ((UCHAR) ht_setting.field.BW * 24) +
((UCHAR) ht_setting.field.ShortGI * 48) +
@@ -2460,7 +2460,7 @@ INT rt28xx_sta_ioctl(IN struct net_device *net_dev,
pObj = (POS_COOKIE) pAd->OS_Cookie;
- //check if the interface is down
+ /*check if the interface is down */
if (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE)) {
{
DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
@@ -2468,7 +2468,7 @@ INT rt28xx_sta_ioctl(IN struct net_device *net_dev,
}
}
- { // determine this ioctl command is comming from which interface.
+ { /* determine this ioctl command is comming from which interface. */
pObj->ioctl_if_type = INT_MAIN;
pObj->ioctl_if = MAIN_MBSSID;
}
@@ -2484,41 +2484,41 @@ INT rt28xx_sta_ioctl(IN struct net_device *net_dev,
rt_ioctl_giwname(net_dev, NULL, name, NULL);
break;
}
- case SIOCGIWESSID: //Get ESSID
+ case SIOCGIWESSID: /*Get ESSID */
{
struct iw_point *essid = &wrq->u.essid;
rt_ioctl_giwessid(net_dev, NULL, essid, essid->pointer);
break;
}
- case SIOCSIWESSID: //Set ESSID
+ case SIOCSIWESSID: /*Set ESSID */
{
struct iw_point *essid = &wrq->u.essid;
rt_ioctl_siwessid(net_dev, NULL, essid, essid->pointer);
break;
}
- case SIOCSIWNWID: // set network id (the cell)
- case SIOCGIWNWID: // get network id
+ case SIOCSIWNWID: /* set network id (the cell) */
+ case SIOCGIWNWID: /* get network id */
Status = -EOPNOTSUPP;
break;
- case SIOCSIWFREQ: //set channel/frequency (Hz)
+ case SIOCSIWFREQ: /*set channel/frequency (Hz) */
{
struct iw_freq *freq = &wrq->u.freq;
rt_ioctl_siwfreq(net_dev, NULL, freq, NULL);
break;
}
- case SIOCGIWFREQ: // get channel/frequency (Hz)
+ case SIOCGIWFREQ: /* get channel/frequency (Hz) */
{
struct iw_freq *freq = &wrq->u.freq;
rt_ioctl_giwfreq(net_dev, NULL, freq, NULL);
break;
}
- case SIOCSIWNICKN: //set node name/nickname
+ case SIOCSIWNICKN: /*set node name/nickname */
{
- //struct iw_point *data=&wrq->u.data;
- //rt_ioctl_siwnickn(net_dev, NULL, data, NULL);
+ /*struct iw_point *data=&wrq->u.data; */
+ /*rt_ioctl_siwnickn(net_dev, NULL, data, NULL); */
break;
}
- case SIOCGIWNICKN: //get node name/nickname
+ case SIOCGIWNICKN: /*get node name/nickname */
{
struct iw_point *erq = NULL;
erq = &wrq->u.data;
@@ -2528,37 +2528,37 @@ INT rt28xx_sta_ioctl(IN struct net_device *net_dev,
erq->length);
break;
}
- case SIOCGIWRATE: //get default bit rate (bps)
+ case SIOCGIWRATE: /*get default bit rate (bps) */
rt_ioctl_giwrate(net_dev, NULL, &wrq->u, NULL);
break;
- case SIOCSIWRATE: //set default bit rate (bps)
+ case SIOCSIWRATE: /*set default bit rate (bps) */
rt_ioctl_siwrate(net_dev, NULL, &wrq->u, NULL);
break;
- case SIOCGIWRTS: // get RTS/CTS threshold (bytes)
+ case SIOCGIWRTS: /* get RTS/CTS threshold (bytes) */
{
struct iw_param *rts = &wrq->u.rts;
rt_ioctl_giwrts(net_dev, NULL, rts, NULL);
break;
}
- case SIOCSIWRTS: //set RTS/CTS threshold (bytes)
+ case SIOCSIWRTS: /*set RTS/CTS threshold (bytes) */
{
struct iw_param *rts = &wrq->u.rts;
rt_ioctl_siwrts(net_dev, NULL, rts, NULL);
break;
}
- case SIOCGIWFRAG: //get fragmentation thr (bytes)
+ case SIOCGIWFRAG: /*get fragmentation thr (bytes) */
{
struct iw_param *frag = &wrq->u.frag;
rt_ioctl_giwfrag(net_dev, NULL, frag, NULL);
break;
}
- case SIOCSIWFRAG: //set fragmentation thr (bytes)
+ case SIOCSIWFRAG: /*set fragmentation thr (bytes) */
{
struct iw_param *frag = &wrq->u.frag;
rt_ioctl_siwfrag(net_dev, NULL, frag, NULL);
break;
}
- case SIOCGIWENCODE: //get encoding token & mode
+ case SIOCGIWENCODE: /*get encoding token & mode */
{
struct iw_point *erq = &wrq->u.encoding;
if (erq)
@@ -2566,7 +2566,7 @@ INT rt28xx_sta_ioctl(IN struct net_device *net_dev,
erq->pointer);
break;
}
- case SIOCSIWENCODE: //set encoding token & mode
+ case SIOCSIWENCODE: /*set encoding token & mode */
{
struct iw_point *erq = &wrq->u.encoding;
if (erq)
@@ -2574,41 +2574,41 @@ INT rt28xx_sta_ioctl(IN struct net_device *net_dev,
erq->pointer);
break;
}
- case SIOCGIWAP: //get access point MAC addresses
+ case SIOCGIWAP: /*get access point MAC addresses */
{
struct sockaddr *ap_addr = &wrq->u.ap_addr;
rt_ioctl_giwap(net_dev, NULL, ap_addr,
ap_addr->sa_data);
break;
}
- case SIOCSIWAP: //set access point MAC addresses
+ case SIOCSIWAP: /*set access point MAC addresses */
{
struct sockaddr *ap_addr = &wrq->u.ap_addr;
rt_ioctl_siwap(net_dev, NULL, ap_addr,
ap_addr->sa_data);
break;
}
- case SIOCGIWMODE: //get operation mode
+ case SIOCGIWMODE: /*get operation mode */
{
__u32 *mode = &wrq->u.mode;
rt_ioctl_giwmode(net_dev, NULL, mode, NULL);
break;
}
- case SIOCSIWMODE: //set operation mode
+ case SIOCSIWMODE: /*set operation mode */
{
__u32 *mode = &wrq->u.mode;
rt_ioctl_siwmode(net_dev, NULL, mode, NULL);
break;
}
- case SIOCGIWSENS: //get sensitivity (dBm)
- case SIOCSIWSENS: //set sensitivity (dBm)
- case SIOCGIWPOWER: //get Power Management settings
- case SIOCSIWPOWER: //set Power Management settings
- case SIOCGIWTXPOW: //get transmit power (dBm)
- case SIOCSIWTXPOW: //set transmit power (dBm)
- case SIOCGIWRANGE: //Get range of parameters
- case SIOCGIWRETRY: //get retry limits and lifetime
- case SIOCSIWRETRY: //set retry limits and lifetime
+ case SIOCGIWSENS: /*get sensitivity (dBm) */
+ case SIOCSIWSENS: /*set sensitivity (dBm) */
+ case SIOCGIWPOWER: /*get Power Management settings */
+ case SIOCSIWPOWER: /*set Power Management settings */
+ case SIOCGIWTXPOW: /*get transmit power (dBm) */
+ case SIOCSIWTXPOW: /*set transmit power (dBm) */
+ case SIOCGIWRANGE: /*Get range of parameters */
+ case SIOCGIWRETRY: /*get retry limits and lifetime */
+ case SIOCSIWRETRY: /*set retry limits and lifetime */
case RT_PRIV_IOCTL:
case RT_PRIV_IOCTL_EXT:
case RTPRIV_IOCTL_SET:
@@ -2625,7 +2625,7 @@ INT rt28xx_sta_ioctl(IN struct net_device *net_dev,
break;
}
- if (StateMachineTouched) // Upper layer sent a MLME-related operations
+ if (StateMachineTouched) /* Upper layer sent a MLME-related operations */
RTMP_MLME_HANDLER(pAd);
return Status;
@@ -2650,7 +2650,7 @@ INT Set_SSID_Proc(IN PRTMP_ADAPTER pAdapter, IN PSTRING arg)
if (strlen(arg) != 0) {
NdisMoveMemory(Ssid.Ssid, arg, strlen(arg));
Ssid.SsidLength = strlen(arg);
- } else //ANY ssid
+ } else /*ANY ssid */
{
Ssid.SsidLength = 0;
memcpy(Ssid.Ssid, "", 0);
@@ -2704,7 +2704,7 @@ INT Set_SSID_Proc(IN PRTMP_ADAPTER pAdapter, IN PSTRING arg)
} else
success = FALSE;
- if (StateMachineTouched) // Upper layer sent a MLME-related operations
+ if (StateMachineTouched) /* Upper layer sent a MLME-related operations */
RTMP_MLME_HANDLER(pAdapter);
return success;
@@ -2724,7 +2724,7 @@ INT Set_NetworkType_Proc(IN PRTMP_ADAPTER pAdapter, IN PSTRING arg)
if (strcmp(arg, "Adhoc") == 0) {
if (pAdapter->StaCfg.BssType != BSS_ADHOC) {
- // Config has changed
+ /* Config has changed */
pAdapter->bConfigChanged = TRUE;
if (MONITOR_ON(pAdapter)) {
RTMP_IO_WRITE32(pAdapter, RX_FILTR_CFG,
@@ -2738,9 +2738,9 @@ INT Set_NetworkType_Proc(IN PRTMP_ADAPTER pAdapter, IN PSTRING arg)
LinkDown(pAdapter, FALSE);
}
if (INFRA_ON(pAdapter)) {
- //BOOLEAN Cancelled;
- // Set the AutoReconnectSsid to prevent it reconnect to old SSID
- // Since calling this indicate user don't want to connect to that SSID anymore.
+ /*BOOLEAN Cancelled; */
+ /* Set the AutoReconnectSsid to prevent it reconnect to old SSID */
+ /* Since calling this indicate user don't want to connect to that SSID anymore. */
pAdapter->MlmeAux.AutoReconnectSsidLen = 32;
NdisZeroMemory(pAdapter->MlmeAux.
AutoReconnectSsid,
@@ -2759,7 +2759,7 @@ INT Set_NetworkType_Proc(IN PRTMP_ADAPTER pAdapter, IN PSTRING arg)
("===>Set_NetworkType_Proc::(AD-HOC)\n"));
} else if (strcmp(arg, "Infra") == 0) {
if (pAdapter->StaCfg.BssType != BSS_INFRA) {
- // Config has changed
+ /* Config has changed */
pAdapter->bConfigChanged = TRUE;
if (MONITOR_ON(pAdapter)) {
RTMP_IO_WRITE32(pAdapter, RX_FILTR_CFG,
@@ -2773,8 +2773,8 @@ INT Set_NetworkType_Proc(IN PRTMP_ADAPTER pAdapter, IN PSTRING arg)
LinkDown(pAdapter, FALSE);
}
if (ADHOC_ON(pAdapter)) {
- // Set the AutoReconnectSsid to prevent it reconnect to old SSID
- // Since calling this indicate user don't want to connect to that SSID anymore.
+ /* Set the AutoReconnectSsid to prevent it reconnect to old SSID */
+ /* Since calling this indicate user don't want to connect to that SSID anymore. */
pAdapter->MlmeAux.AutoReconnectSsidLen = 32;
NdisZeroMemory(pAdapter->MlmeAux.
AutoReconnectSsid,
@@ -2794,9 +2794,9 @@ INT Set_NetworkType_Proc(IN PRTMP_ADAPTER pAdapter, IN PSTRING arg)
OPSTATUS_CLEAR_FLAG(pAdapter, fOP_STATUS_INFRA_ON);
OPSTATUS_CLEAR_FLAG(pAdapter, fOP_STATUS_ADHOC_ON);
OPSTATUS_SET_FLAG(pAdapter, fOP_STATUS_MEDIA_STATE_CONNECTED);
- // disable all periodic state machine
+ /* disable all periodic state machine */
pAdapter->StaCfg.bAutoReconnect = FALSE;
- // reset all mlme state machine
+ /* reset all mlme state machine */
RTMP_MLME_RESET_STATE_MACHINE(pAdapter);
DBGPRINT(RT_DEBUG_TRACE,
("fOP_STATUS_MEDIA_STATE_CONNECTED \n"));
@@ -2812,7 +2812,7 @@ INT Set_NetworkType_Proc(IN PRTMP_ADAPTER pAdapter, IN PSTRING arg)
pAdapter->CommonCfg.RegTransmitSetting.field.BW == BW_40 &&
pAdapter->CommonCfg.RegTransmitSetting.field.EXTCHA ==
EXTCHA_ABOVE) {
- // 40MHz ,control channel at lower
+ /* 40MHz ,control channel at lower */
RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, BBP_R4,
&bbpValue);
bbpValue &= (~0x18);
@@ -2820,7 +2820,7 @@ INT Set_NetworkType_Proc(IN PRTMP_ADAPTER pAdapter, IN PSTRING arg)
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, BBP_R4,
bbpValue);
pAdapter->CommonCfg.BBPCurrentBW = BW_40;
- // RX : control channel at lower
+ /* RX : control channel at lower */
RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, BBP_R3,
&bbpValue);
bbpValue &= (~0x20);
@@ -2846,7 +2846,7 @@ INT Set_NetworkType_Proc(IN PRTMP_ADAPTER pAdapter, IN PSTRING arg)
BW_40
&& pAdapter->CommonCfg.RegTransmitSetting.field.
EXTCHA == EXTCHA_BELOW) {
- // 40MHz ,control channel at upper
+ /* 40MHz ,control channel at upper */
RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, BBP_R4,
&bbpValue);
bbpValue &= (~0x18);
@@ -2875,7 +2875,7 @@ INT Set_NetworkType_Proc(IN PRTMP_ADAPTER pAdapter, IN PSTRING arg)
pAdapter->CommonCfg.Channel,
pAdapter->CommonCfg.CentralChannel));
} else {
- // 20MHz
+ /* 20MHz */
RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, BBP_R4,
&bbpValue);
bbpValue &= (~0x18);
@@ -2889,13 +2889,13 @@ INT Set_NetworkType_Proc(IN PRTMP_ADAPTER pAdapter, IN PSTRING arg)
("BW_20, Channel(%d)\n",
pAdapter->CommonCfg.Channel));
}
- // Enable Rx with promiscuous reception
+ /* Enable Rx with promiscuous reception */
RTMP_IO_WRITE32(pAdapter, RX_FILTR_CFG, 0x3);
- // ASIC supporsts sniffer function with replacing RSSI with timestamp.
- //RTMP_IO_READ32(pAdapter, MAC_SYS_CTRL, &Value);
- //Value |= (0x80);
- //RTMP_IO_WRITE32(pAdapter, MAC_SYS_CTRL, Value);
- // disable sync
+ /* ASIC supporsts sniffer function with replacing RSSI with timestamp. */
+ /*RTMP_IO_READ32(pAdapter, MAC_SYS_CTRL, &Value); */
+ /*Value |= (0x80); */
+ /*RTMP_IO_WRITE32(pAdapter, MAC_SYS_CTRL, Value); */
+ /* disable sync */
RTMP_IO_READ32(pAdapter, BCN_TIME_CFG, &csr.word);
csr.field.bBeaconGen = 0;
csr.field.bTBTTEnable = 0;
@@ -2903,11 +2903,11 @@ INT Set_NetworkType_Proc(IN PRTMP_ADAPTER pAdapter, IN PSTRING arg)
RTMP_IO_WRITE32(pAdapter, BCN_TIME_CFG, csr.word);
pAdapter->StaCfg.BssType = BSS_MONITOR;
- pAdapter->net_dev->type = ARPHRD_IEEE80211_PRISM; //ARPHRD_IEEE80211; // IEEE80211
+ pAdapter->net_dev->type = ARPHRD_IEEE80211_PRISM; /*ARPHRD_IEEE80211; // IEEE80211 */
DBGPRINT(RT_DEBUG_TRACE,
("===>Set_NetworkType_Proc::(MONITOR)\n"));
}
- // Reset Ralink supplicant to not use, it will be set to start when UI set PMK key
+ /* Reset Ralink supplicant to not use, it will be set to start when UI set PMK key */
pAdapter->StaCfg.WpaState = SS_NOTUSE;
DBGPRINT(RT_DEBUG_TRACE,
diff --git a/drivers/staging/rt2860/usb_main_dev.c b/drivers/staging/rt2860/usb_main_dev.c
index ebc2261..74529d1 100644
--- a/drivers/staging/rt2860/usb_main_dev.c
+++ b/drivers/staging/rt2860/usb_main_dev.c
@@ -26,9 +26,9 @@
#include "rt_config.h"
-// Following information will be show when you run 'modinfo'
-// *** If you have a solution for the bug in current version of driver, please mail to me.
-// Otherwise post to forum in ralinktech's web site(www.ralinktech.com) and let all users help you. ***
+/* Following information will be show when you run 'modinfo' */
+/* *** If you have a solution for the bug in current version of driver, please mail to me. */
+/* Otherwise post to forum in ralinktech's web site(www.ralinktech.com) and let all users help you. *** */
MODULE_AUTHOR("Paul Lin <paul_lin at ralinktech.com>");
MODULE_DESCRIPTION("RT2870/RT3070 Wireless Lan Linux Driver");
MODULE_LICENSE("GPL");
@@ -101,7 +101,7 @@ struct usb_device_id rtusb_usb_id[] = {
{USB_DEVICE(0x1737, 0x0071)}, /* Linksys WUSB600N */
{USB_DEVICE(0x0411, 0x00e8)}, /* Buffalo WLI-UC-G300N */
{USB_DEVICE(0x050d, 0x815c)}, /* Belkin F5D8053 */
-#endif // RT2870 //
+#endif /* RT2870 // */
#ifdef RT3070
{USB_DEVICE(0x148F, 0x3070)}, /* Ralink 3070 */
{USB_DEVICE(0x148F, 0x3071)}, /* Ralink 3071 */
@@ -134,7 +134,7 @@ struct usb_device_id rtusb_usb_id[] = {
{USB_DEVICE(0x5A57, 0x0283)}, /* Zinwell 3072 */
{USB_DEVICE(0x04BB, 0x0945)}, /* I-O DATA 3072 */
{USB_DEVICE(0x203D, 0x1480)}, /* Encore 3070 */
-#endif // RT3070 //
+#endif /* RT3070 // */
{USB_DEVICE(0x0DF6, 0x003F)}, /* Sitecom WL-608 */
{USB_DEVICE(0x1737, 0x0077)}, /* Linksys WUSB54GC-EU v3 */
{USB_DEVICE(0x2001, 0x3C09)}, /* D-Link */
@@ -207,14 +207,14 @@ BOOLEAN RT28XXChipsetCheck(IN void *_dev_p)
/**************************************************************************/
/**************************************************************************/
-//tested for kernel 2.6series
+/*tested for kernel 2.6series */
/**************************************************************************/
/**************************************************************************/
#ifdef CONFIG_PM
static int rt2870_suspend(struct usb_interface *intf, pm_message_t state);
static int rt2870_resume(struct usb_interface *intf);
-#endif // CONFIG_PM //
+#endif /* CONFIG_PM // */
static int rtusb_probe(struct usb_interface *intf,
const struct usb_device_id *id);
@@ -264,8 +264,8 @@ static BOOLEAN USBDevConfigInit(IN struct usb_device *dev,
((iface_desc->endpoint[i].desc.
bEndpointAddress & USB_ENDPOINT_DIR_MASK) ==
USB_DIR_OUT)) {
- // there are 6 bulk out EP. EP6 highest priority.
- // EP1-4 is EDCA. EP5 is HCCA.
+ /* there are 6 bulk out EP. EP6 highest priority. */
+ /* EP1-4 is EDCA. EP5 is HCCA. */
pAd->BulkOutEpAddr[BulkOutIdx++] =
iface_desc->endpoint[i].desc.bEndpointAddress;
pAd->BulkOutMaxPacketSize =
@@ -340,8 +340,8 @@ resume:rt2870_resume,
VOID RT2870RejectPendingPackets(IN PRTMP_ADAPTER pAd)
{
- // clear PS packets
- // clear TxSw packets
+ /* clear PS packets */
+ /* clear TxSw packets */
}
static int rt2870_suspend(struct usb_interface *intf, pm_message_t state)
@@ -379,16 +379,16 @@ static int rt2870_resume(struct usb_interface *intf)
DBGPRINT(RT_DEBUG_TRACE, ("<=== rt2870_resume()\n"));
return 0;
}
-#endif // CONFIG_PM //
+#endif /* CONFIG_PM // */
-// Init driver module
+/* Init driver module */
INT __init rtusb_init(void)
{
printk("rtusb init --->\n");
return usb_register(&rtusb_driver);
}
-// Deinit driver module
+/* Deinit driver module */
VOID __exit rtusb_exit(void)
{
usb_deregister(&rtusb_driver);
@@ -442,7 +442,7 @@ INT MlmeThread(IN void *Context)
#endif
/* lock the device pointers , need to check if required */
- //down(&(pAd->usbdev_semaphore));
+ /*down(&(pAd->usbdev_semaphore)); */
if (!pAd->PM_FlgSuspend)
MlmeHandler(pAd);
@@ -521,7 +521,7 @@ INT RTUSBCmdThread(IN void *Context)
CMDHandler(pAd);
}
- if (pAd && !pAd->PM_FlgSuspend) { // Clear the CmdQElements.
+ if (pAd && !pAd->PM_FlgSuspend) { /* Clear the CmdQElements. */
CmdQElmt *pCmdQElmt = NULL;
NdisAcquireSpinLock(&pAd->CmdQLock);
@@ -633,10 +633,10 @@ VOID RTUSBWatchDog(IN RTMP_ADAPTER * pAd)
fRTMP_ADAPTER_NIC_NOT_EXIST |
fRTMP_ADAPTER_BULKOUT_RESET)))
) {
- // FIXME: Following code just support single bulk out. If you wanna support multiple bulk out. Modify it!
+ /* FIXME: Following code just support single bulk out. If you wanna support multiple bulk out. Modify it! */
pHTTXContext =
(PHT_TX_CONTEXT) (&pAd->TxContext[idx]);
- if (pHTTXContext->IRPPending) { // Check TxContext.
+ if (pHTTXContext->IRPPending) { /* Check TxContext. */
pUrb = pHTTXContext->pUrb;
actual_length = pUrb->actual_length;
@@ -647,7 +647,7 @@ VOID RTUSBWatchDog(IN RTMP_ADAPTER * pAd)
PTX_CONTEXT pMLMEContext, pNULLContext,
pPsPollContext;
- //Check MgmtContext.
+ /*Check MgmtContext. */
pMLMEContext =
(PTX_CONTEXT) (pAd->MgmtRing.
Cell[pAd->MgmtRing.
@@ -688,7 +688,7 @@ VOID RTUSBWatchDog(IN RTMP_ADAPTER * pAd)
&& pAd->TransferedLength[idx] <
transfer_buffer_length
&& actual_length != 0
-// && TxRxQ_Pcnt==0
+/* && TxRxQ_Pcnt==0 */
&& pAd->watchDogTxPendingCnt[idx] >
3)
|| isDataPacket == FALSE
@@ -699,10 +699,10 @@ VOID RTUSBWatchDog(IN RTMP_ADAPTER * pAd)
idx));
DBGPRINT(RT_DEBUG_TRACE,
("Unlink the pending URB!\n"));
- // unlink it now
+ /* unlink it now */
RTUSB_UNLINK_URB(pUrb);
- // Sleep 200 microseconds to give cancellation time to work
- //RTMPusecDelay(200);
+ /* Sleep 200 microseconds to give cancellation time to work */
+ /*RTMPusecDelay(200); */
needDumpSeq = TRUE;
}
} else {
@@ -721,7 +721,7 @@ VOID RTUSBWatchDog(IN RTMP_ADAPTER * pAd)
}
}
- // For Sigma debug, dump the ba_reordering sequence.
+ /* For Sigma debug, dump the ba_reordering sequence. */
if ((needDumpSeq == TRUE) && (pAd->CommonCfg.bDisableReordering == 0)) {
USHORT Idx;
PBA_REC_ENTRY pBAEntry = NULL;
@@ -780,22 +780,22 @@ static void rt2870_disconnect(struct usb_device *dev, PRTMP_ADAPTER pAd)
}
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST);
- // for debug, wait to show some messages to /proc system
+ /* for debug, wait to show some messages to /proc system */
udelay(1);
RtmpPhyNetDevExit(pAd, pAd->net_dev);
- // FIXME: Shall we need following delay and flush the schedule??
+ /* FIXME: Shall we need following delay and flush the schedule?? */
udelay(1);
flush_scheduled_work();
udelay(1);
- // free the root net_device
+ /* free the root net_device */
RtmpOSNetDevFree(pAd->net_dev);
RtmpRaDevCtrlExit(pAd);
- // release a use of the usb device structure
+ /* release a use of the usb device structure */
usb_put_dev(dev);
udelay(1);
@@ -815,12 +815,12 @@ static int __devinit rt2870_probe(IN struct usb_interface *intf,
DBGPRINT(RT_DEBUG_TRACE, ("===>rt2870_probe()!\n"));
- // Check chipset vendor/product ID
- //if (RT28XXChipsetCheck(_dev_p) == FALSE)
- // goto err_out;
+ /* Check chipset vendor/product ID */
+ /*if (RT28XXChipsetCheck(_dev_p) == FALSE) */
+ /* goto err_out; */
-//RtmpDevInit=============================================
- // Allocate RTMP_ADAPTER adapter structure
+/*RtmpDevInit============================================= */
+ /* Allocate RTMP_ADAPTER adapter structure */
handle = kmalloc(sizeof(struct os_cookie), GFP_KERNEL);
if (handle == NULL) {
printk
@@ -834,18 +834,18 @@ static int __devinit rt2870_probe(IN struct usb_interface *intf,
kfree(handle);
goto err_out;
}
-//USBDevInit==============================================
+/*USBDevInit============================================== */
if (USBDevConfigInit(usb_dev, intf, pAd) == FALSE)
goto err_out_free_radev;
RtmpRaDevCtrlInit(pAd, RTMP_DEV_INF_USB);
-//NetDevInit==============================================
+/*NetDevInit============================================== */
net_dev = RtmpPhyNetDevInit(pAd, &netDevHook);
if (net_dev == NULL)
goto err_out_free_radev;
- // Here are the net_device structure with usb specific parameters.
+ /* Here are the net_device structure with usb specific parameters. */
/* for supporting Network Manager.
* Set the sysfs physical device reference for the network logical device if set prior to registration will
* cause a symlink during initialization.
@@ -854,8 +854,8 @@ static int __devinit rt2870_probe(IN struct usb_interface *intf,
pAd->StaCfg.OriDevType = net_dev->type;
-//All done, it's time to register the net device to linux kernel.
- // Register this device
+/*All done, it's time to register the net device to linux kernel. */
+ /* Register this device */
status = RtmpOSNetDevAttach(net_dev, &netDevHook);
if (status != 0)
goto err_out_free_netdev;
diff --git a/drivers/staging/rt2870/common/rtusb_bulk.c b/drivers/staging/rt2870/common/rtusb_bulk.c
index 269dedc..a45f648 100644
--- a/drivers/staging/rt2870/common/rtusb_bulk.c
+++ b/drivers/staging/rt2870/common/rtusb_bulk.c
@@ -40,11 +40,11 @@
#ifdef RTMP_MAC_USB
#include "../rt_config.h"
-// Match total 6 bulkout endpoint to corresponding queue.
+/* Match total 6 bulkout endpoint to corresponding queue. */
UCHAR EpToQueue[6] =
{ FIFO_EDCA, FIFO_EDCA, FIFO_EDCA, FIFO_EDCA, FIFO_EDCA, FIFO_MGMT };
-//static BOOLEAN SingleBulkOut = FALSE;
+/*static BOOLEAN SingleBulkOut = FALSE; */
void RTUSB_FILL_BULK_URB(struct urb *pUrb,
struct usb_device *pUsb_Dev,
@@ -69,7 +69,7 @@ VOID RTUSBInitTxDesc(IN PRTMP_ADAPTER pAd,
pUrb = pTxContext->pUrb;
ASSERT(pUrb);
- // Store BulkOut PipeId
+ /* Store BulkOut PipeId */
pTxContext->BulkOutPipeId = BulkOutPipeId;
if (pTxContext->bAggregatible) {
@@ -79,7 +79,7 @@ VOID RTUSBInitTxDesc(IN PRTMP_ADAPTER pAd,
(PUCHAR) pTxContext->TransferBuffer->field.WirelessPacket;
}
- //Initialize a tx bulk urb
+ /*Initialize a tx bulk urb */
RTUSB_FILL_BULK_URB(pUrb,
pObj->pUsb_Dev,
usb_sndbulkpipe(pObj->pUsb_Dev,
@@ -108,14 +108,14 @@ VOID RTUSBInitHTTxDesc(IN PRTMP_ADAPTER pAd,
pUrb = pTxContext->pUrb;
ASSERT(pUrb);
- // Store BulkOut PipeId
+ /* Store BulkOut PipeId */
pTxContext->BulkOutPipeId = BulkOutPipeId;
pSrc =
&pTxContext->TransferBuffer->field.WirelessPacket[pTxContext->
NextBulkOutPosition];
- //Initialize a tx bulk urb
+ /*Initialize a tx bulk urb */
RTUSB_FILL_BULK_URB(pUrb,
pObj->pUsb_Dev,
usb_sndbulkpipe(pObj->pUsb_Dev,
@@ -142,7 +142,7 @@ VOID RTUSBInitRxDesc(IN PRTMP_ADAPTER pAd, IN PRX_CONTEXT pRxContext)
else
RX_bulk_size = MAX_RXBULK_SIZE;
- //Initialize a rx bulk urb
+ /*Initialize a rx bulk urb */
RTUSB_FILL_BULK_URB(pUrb,
pObj->pUsb_Dev,
usb_rcvbulkpipe(pObj->pUsb_Dev, pAd->BulkInEpAddr),
@@ -223,7 +223,7 @@ VOID RTUSBBulkOutDataPacket(IN PRTMP_ADAPTER pAd,
BULK_OUT_LOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags);
pAd->BulkOutPending[BulkOutPipeId] = FALSE;
- // Clear Data flag
+ /* Clear Data flag */
RTUSB_CLEAR_BULK_FLAG(pAd,
(fRTUSB_BULK_OUT_DATA_FRAG <<
BulkOutPipeId));
@@ -234,15 +234,15 @@ VOID RTUSBBulkOutDataPacket(IN PRTMP_ADAPTER pAd,
BULK_OUT_UNLOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags);
return;
}
- // Clear Data flag
+ /* Clear Data flag */
RTUSB_CLEAR_BULK_FLAG(pAd,
(fRTUSB_BULK_OUT_DATA_FRAG << BulkOutPipeId));
RTUSB_CLEAR_BULK_FLAG(pAd,
(fRTUSB_BULK_OUT_DATA_NORMAL << BulkOutPipeId));
- //DBGPRINT(RT_DEBUG_TRACE,("BulkOut-B:I=0x%lx, CWPos=%ld, CWRPos=%ld, NBPos=%ld, ENBPos=%ld, bCopy=%d!\n", in_interrupt(),
- // pHTTXContext->CurWritePosition, pHTTXContext->CurWriteRealPos, pHTTXContext->NextBulkOutPosition,
- // pHTTXContext->ENextBulkOutPosition, pHTTXContext->bCopySavePad));
+ /*DBGPRINT(RT_DEBUG_TRACE,("BulkOut-B:I=0x%lx, CWPos=%ld, CWRPos=%ld, NBPos=%ld, ENBPos=%ld, bCopy=%d!\n", in_interrupt(), */
+ /* pHTTXContext->CurWritePosition, pHTTXContext->CurWriteRealPos, pHTTXContext->NextBulkOutPosition, */
+ /* pHTTXContext->ENextBulkOutPosition, pHTTXContext->bCopySavePad)); */
pHTTXContext->NextBulkOutPosition = pHTTXContext->ENextBulkOutPosition;
ThisBulkSize = 0;
TmpBulkEndPos = pHTTXContext->NextBulkOutPosition;
@@ -282,12 +282,12 @@ VOID RTUSBBulkOutDataPacket(IN PRTMP_ADAPTER pAd,
("RTUSBBulkOutDataPacket AMPDU = %d.\n",
pTxWI->AMPDU));
- // add by Iverson, limit BulkOut size to 4k to pass WMM b mode 2T1R test items
- //if ((ThisBulkSize != 0) && (pTxWI->AMPDU == 0))
+ /* add by Iverson, limit BulkOut size to 4k to pass WMM b mode 2T1R test items */
+ /*if ((ThisBulkSize != 0) && (pTxWI->AMPDU == 0)) */
if ((ThisBulkSize != 0) && (pTxWI->PHYMODE == MODE_CCK)) {
if (((ThisBulkSize & 0xffff8000) != 0)
|| ((ThisBulkSize & 0x1000) == 0x1000)) {
- // Limit BulkOut size to about 4k bytes.
+ /* Limit BulkOut size to about 4k bytes. */
pHTTXContext->ENextBulkOutPosition =
TmpBulkEndPos;
break;
@@ -297,21 +297,21 @@ VOID RTUSBBulkOutDataPacket(IN PRTMP_ADAPTER pAd,
0))
/*|| ( (ThisBulkSize != 0) && (pTxWI->AMPDU == 0)) */
) {
- // For USB 1.1 or peer which didn't support AMPDU, limit the BulkOut size.
- // For performence in b/g mode, now just check for USB 1.1 and didn't care about the APMDU or not! 2008/06/04.
+ /* For USB 1.1 or peer which didn't support AMPDU, limit the BulkOut size. */
+ /* For performence in b/g mode, now just check for USB 1.1 and didn't care about the APMDU or not! 2008/06/04. */
pHTTXContext->ENextBulkOutPosition =
TmpBulkEndPos;
break;
}
}
- // end Iverson
+ /* end Iverson */
else {
- if (((ThisBulkSize & 0xffff8000) != 0) || ((ThisBulkSize & 0x6000) == 0x6000)) { // Limit BulkOut size to about 24k bytes.
+ if (((ThisBulkSize & 0xffff8000) != 0) || ((ThisBulkSize & 0x6000) == 0x6000)) { /* Limit BulkOut size to about 24k bytes. */
pHTTXContext->ENextBulkOutPosition =
TmpBulkEndPos;
break;
- } else if (((pAd->BulkOutMaxPacketSize < 512) && ((ThisBulkSize & 0xfffff800) != 0)) /*|| ( (ThisBulkSize != 0) && (pTxWI->AMPDU == 0)) */ ) { // For USB 1.1 or peer which didn't support AMPDU, limit the BulkOut size.
- // For performence in b/g mode, now just check for USB 1.1 and didn't care about the APMDU or not! 2008/06/04.
+ } else if (((pAd->BulkOutMaxPacketSize < 512) && ((ThisBulkSize & 0xfffff800) != 0)) /*|| ( (ThisBulkSize != 0) && (pTxWI->AMPDU == 0)) */ ) { /* For USB 1.1 or peer which didn't support AMPDU, limit the BulkOut size. */
+ /* For performence in b/g mode, now just check for USB 1.1 and didn't care about the APMDU or not! 2008/06/04. */
pHTTXContext->ENextBulkOutPosition =
TmpBulkEndPos;
break;
@@ -368,10 +368,10 @@ VOID RTUSBBulkOutDataPacket(IN PRTMP_ADAPTER pAd,
pAd->BulkOutPending[BulkOutPipeId] = FALSE;
BULK_OUT_UNLOCK(&pAd->BulkOutLock[BulkOutPipeId],
IrqFlags);
- //DBGPRINT(RT_DEBUG_LOUD,("Out:pTxInfo->USBDMATxPktLen=%d!\n", pTxInfo->USBDMATxPktLen));
+ /*DBGPRINT(RT_DEBUG_LOUD,("Out:pTxInfo->USBDMATxPktLen=%d!\n", pTxInfo->USBDMATxPktLen)); */
return;
}
- // Increase Total transmit byte counter
+ /* Increase Total transmit byte counter */
pAd->RalinkCounters.OneSecTransmittedByteCount +=
pTxWI->MPDUtotalByteCount;
pAd->RalinkCounters.TransmittedByteCount +=
@@ -379,7 +379,7 @@ VOID RTUSBBulkOutDataPacket(IN PRTMP_ADAPTER pAd,
pLastTxInfo = pTxInfo;
- // Make sure we use EDCA QUEUE.
+ /* Make sure we use EDCA QUEUE. */
pTxInfo->QSEL = FIFO_EDCA;
ThisBulkSize += (pTxInfo->USBDMATxPktLen + 4);
TmpBulkEndPos += (pTxInfo->USBDMATxPktLen + 4);
@@ -400,7 +400,7 @@ VOID RTUSBBulkOutDataPacket(IN PRTMP_ADAPTER pAd,
} while (TRUE);
- // adjust the pTxInfo->USBDMANextVLD value of last pTxInfo.
+ /* adjust the pTxInfo->USBDMANextVLD value of last pTxInfo. */
if (pLastTxInfo) {
pLastTxInfo->USBDMANextVLD = 0;
}
@@ -446,7 +446,7 @@ VOID RTUSBBulkOutDataPacket(IN PRTMP_ADAPTER pAd,
pBuf[0], pBuf[1], pBuf[2], pBuf[3],
pBuf[4], pBuf[5], pBuf[6], pBuf[7]));
}
- //DBGPRINT(RT_DEBUG_LOUD,("ENPos==CWPos=%ld, CWRPos=%ld, bCSPad=%d!\n", pHTTXContext->CurWritePosition, pHTTXContext->CurWriteRealPos, pHTTXContext->bCopySavePad));
+ /*DBGPRINT(RT_DEBUG_LOUD,("ENPos==CWPos=%ld, CWRPos=%ld, bCSPad=%d!\n", pHTTXContext->CurWritePosition, pHTTXContext->CurWriteRealPos, pHTTXContext->bCopySavePad)); */
}
if (pAd->bForcePrintTX == TRUE)
@@ -456,9 +456,9 @@ VOID RTUSBBulkOutDataPacket(IN PRTMP_ADAPTER pAd,
pHTTXContext->NextBulkOutPosition,
pHTTXContext->ENextBulkOutPosition,
pHTTXContext->bCopySavePad));
- //DBGPRINT(RT_DEBUG_LOUD,("BulkOut-A:Size=%ld, CWPos=%ld, CWRPos=%ld, NBPos=%ld, ENBPos=%ld, bCopy=%d, bLRound=%d!\n", ThisBulkSize, pHTTXContext->CurWritePosition, pHTTXContext->CurWriteRealPos, pHTTXContext->NextBulkOutPosition, pHTTXContext->ENextBulkOutPosition, pHTTXContext->bCopySavePad, bTxQLastRound));
+ /*DBGPRINT(RT_DEBUG_LOUD,("BulkOut-A:Size=%ld, CWPos=%ld, CWRPos=%ld, NBPos=%ld, ENBPos=%ld, bCopy=%d, bLRound=%d!\n", ThisBulkSize, pHTTXContext->CurWritePosition, pHTTXContext->CurWriteRealPos, pHTTXContext->NextBulkOutPosition, pHTTXContext->ENextBulkOutPosition, pHTTXContext->bCopySavePad, bTxQLastRound)); */
- // USB DMA engine requires to pad extra 4 bytes. This pad doesn't count into real bulkoutsize.
+ /* USB DMA engine requires to pad extra 4 bytes. This pad doesn't count into real bulkoutsize. */
pAppendant = &pWirelessPkt[TmpBulkEndPos];
NdisZeroMemory(pAppendant, 8);
ThisBulkSize += 4;
@@ -470,7 +470,7 @@ VOID RTUSBBulkOutDataPacket(IN PRTMP_ADAPTER pAd,
pAd->watchDogTxPendingCnt[BulkOutPipeId] = 1;
BULK_OUT_UNLOCK(&pAd->TxContextQueueLock[BulkOutPipeId], IrqFlags2);
- // Init Tx context descriptor
+ /* Init Tx context descriptor */
RTUSBInitHTTxDesc(pAd, pHTTXContext, BulkOutPipeId, ThisBulkSize,
(usb_complete_t) RTUSBBulkOutDataPacketComplete);
@@ -506,7 +506,7 @@ VOID RTUSBBulkOutDataPacketComplete(purbb_t pUrb, struct pt_regs * pt_regs)
pAd = pHTTXContext->pAd;
pObj = (POS_COOKIE) pAd->OS_Cookie;
- // Store BulkOut PipeId
+ /* Store BulkOut PipeId */
BulkOutPipeId = pHTTXContext->BulkOutPipeId;
pAd->BulkOutDataOneSecCount++;
@@ -562,13 +562,13 @@ VOID RTUSBBulkOutNullFrame(IN PRTMP_ADAPTER pAd)
pNullContext->IRPPending = TRUE;
RTMP_IRQ_UNLOCK(&pAd->BulkOutLock[0], IrqFlags);
- // Increase Total transmit byte counter
+ /* Increase Total transmit byte counter */
pAd->RalinkCounters.TransmittedByteCount += pNullContext->BulkOutSize;
- // Clear Null frame bulk flag
+ /* Clear Null frame bulk flag */
RTUSB_CLEAR_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_NULL);
- // Init Tx context descriptor
+ /* Init Tx context descriptor */
RTUSBInitTxDesc(pAd, pNullContext, 0,
(usb_complete_t) RTUSBBulkOutNullFrameComplete);
@@ -588,7 +588,7 @@ VOID RTUSBBulkOutNullFrame(IN PRTMP_ADAPTER pAd)
}
-// NULL frame use BulkOutPipeId = 0
+/* NULL frame use BulkOutPipeId = 0 */
VOID RTUSBBulkOutNullFrameComplete(purbb_t pUrb, struct pt_regs * pt_regs)
{
PRTMP_ADAPTER pAd;
@@ -633,7 +633,7 @@ VOID RTUSBBulkOutMLMEPacket(IN PRTMP_ADAPTER pAd, IN UCHAR Index)
(pMLMEContext->InUse == FALSE) ||
(pMLMEContext->bWaitingBulkOut == FALSE)) {
- // Clear MLME bulk flag
+ /* Clear MLME bulk flag */
RTUSB_CLEAR_BULK_FLAG(pAd, fRTUSB_BULK_OUT_MLME);
return;
@@ -652,17 +652,17 @@ VOID RTUSBBulkOutMLMEPacket(IN PRTMP_ADAPTER pAd, IN UCHAR Index)
pMLMEContext->bWaitingBulkOut = FALSE;
RTMP_IRQ_UNLOCK(&pAd->BulkOutLock[MGMTPIPEIDX], IrqFlags);
- // Increase Total transmit byte counter
+ /* Increase Total transmit byte counter */
pAd->RalinkCounters.TransmittedByteCount += pMLMEContext->BulkOutSize;
- // Clear MLME bulk flag
+ /* Clear MLME bulk flag */
RTUSB_CLEAR_BULK_FLAG(pAd, fRTUSB_BULK_OUT_MLME);
- // Init Tx context descriptor
+ /* Init Tx context descriptor */
RTUSBInitTxDesc(pAd, pMLMEContext, MGMTPIPEIDX,
(usb_complete_t) RTUSBBulkOutMLMEPacketComplete);
- //For mgmt urb buffer, because we use sk_buff, so we need to notify the USB controller do dma mapping.
+ /*For mgmt urb buffer, because we use sk_buff, so we need to notify the USB controller do dma mapping. */
pUrb->transfer_dma = 0;
pUrb->transfer_flags &= (~URB_NO_TRANSFER_DMA_MAP);
@@ -680,8 +680,8 @@ VOID RTUSBBulkOutMLMEPacket(IN PRTMP_ADAPTER pAd, IN UCHAR Index)
return;
}
- //DBGPRINT_RAW(RT_DEBUG_INFO, ("<---RTUSBBulkOutMLMEPacket \n"));
-// printk("<---RTUSBBulkOutMLMEPacket,Cpu=%d!, Dma=%d, SwIdx=%d!\n", pAd->MgmtRing.TxCpuIdx, pAd->MgmtRing.TxDmaIdx, pAd->MgmtRing.TxSwFreeIdx);
+ /*DBGPRINT_RAW(RT_DEBUG_INFO, ("<---RTUSBBulkOutMLMEPacket \n")); */
+/* printk("<---RTUSBBulkOutMLMEPacket,Cpu=%d!, Dma=%d, SwIdx=%d!\n", pAd->MgmtRing.TxCpuIdx, pAd->MgmtRing.TxDmaIdx, pAd->MgmtRing.TxSwFreeIdx); */
}
VOID RTUSBBulkOutMLMEPacketComplete(purbb_t pUrb, struct pt_regs * pt_regs)
@@ -692,7 +692,7 @@ VOID RTUSBBulkOutMLMEPacketComplete(purbb_t pUrb, struct pt_regs * pt_regs)
POS_COOKIE pObj;
int index;
- //DBGPRINT_RAW(RT_DEBUG_INFO, ("--->RTUSBBulkOutMLMEPacketComplete\n"));
+ /*DBGPRINT_RAW(RT_DEBUG_INFO, ("--->RTUSBBulkOutMLMEPacketComplete\n")); */
pMLMEContext = (PTX_CONTEXT) pUrb->context;
pAd = pMLMEContext->pAd;
pObj = (POS_COOKIE) pAd->OS_Cookie;
@@ -734,10 +734,10 @@ VOID RTUSBBulkOutPsPoll(IN PRTMP_ADAPTER pAd)
pPsPollContext->IRPPending = TRUE;
RTMP_IRQ_UNLOCK(&pAd->BulkOutLock[0], IrqFlags);
- // Clear PS-Poll bulk flag
+ /* Clear PS-Poll bulk flag */
RTUSB_CLEAR_BULK_FLAG(pAd, fRTUSB_BULK_OUT_PSPOLL);
- // Init Tx context descriptor
+ /* Init Tx context descriptor */
RTUSBInitTxDesc(pAd, pPsPollContext, MGMTPIPEIDX,
(usb_complete_t) RTUSBBulkOutPsPollComplete);
@@ -757,7 +757,7 @@ VOID RTUSBBulkOutPsPoll(IN PRTMP_ADAPTER pAd)
}
-// PS-Poll frame use BulkOutPipeId = 0
+/* PS-Poll frame use BulkOutPipeId = 0 */
VOID RTUSBBulkOutPsPollComplete(purbb_t pUrb, struct pt_regs * pt_regs)
{
PRTMP_ADAPTER pAd;
@@ -794,12 +794,12 @@ VOID DoBulkIn(IN RTMP_ADAPTER * pAd)
pAd->BulkInReq++;
RTMP_IRQ_UNLOCK(&pAd->BulkInLock, IrqFlags);
- // Init Rx context descriptor
+ /* Init Rx context descriptor */
NdisZeroMemory(pRxContext->TransferBuffer, pRxContext->BulkInOffset);
RTUSBInitRxDesc(pAd, pRxContext);
pUrb = pRxContext->pUrb;
- if ((ret = RTUSB_SUBMIT_URB(pUrb)) != 0) { // fail
+ if ((ret = RTUSB_SUBMIT_URB(pUrb)) != 0) { /* fail */
RTMP_IRQ_LOCK(&pAd->BulkInLock, IrqFlags);
pRxContext->InUse = FALSE;
@@ -809,9 +809,9 @@ VOID DoBulkIn(IN RTMP_ADAPTER * pAd)
RTMP_IRQ_UNLOCK(&pAd->BulkInLock, IrqFlags);
DBGPRINT(RT_DEBUG_ERROR,
("RTUSBBulkReceive: Submit Rx URB failed %d\n", ret));
- } else { // success
+ } else { /* success */
ASSERT((pRxContext->InUse == pRxContext->IRPPending));
- //printk("BIDone, Pend=%d,BIIdx=%d,BIRIdx=%d!\n", pAd->PendingRx, pAd->NextRxBulkInIndex, pAd->NextRxBulkInReadIndex);
+ /*printk("BIDone, Pend=%d,BIIdx=%d,BIRIdx=%d!\n", pAd->PendingRx, pAd->NextRxBulkInIndex, pAd->NextRxBulkInReadIndex); */
}
}
@@ -864,10 +864,10 @@ VOID RTUSBBulkReceive(IN PRTMP_ADAPTER pAd)
pRxContext->bRxHandling = TRUE;
RTMP_IRQ_UNLOCK(&pAd->BulkInLock, IrqFlags);
- // read RxContext, Since not
+ /* read RxContext, Since not */
STARxDoneInterruptHandle(pAd, TRUE);
- // Finish to handle this bulkIn buffer.
+ /* Finish to handle this bulkIn buffer. */
RTMP_IRQ_LOCK(&pAd->BulkInLock, IrqFlags);
pRxContext->BulkInOffset = 0;
pRxContext->Readable = FALSE;
@@ -914,9 +914,9 @@ VOID RTUSBBulkReceive(IN PRTMP_ADAPTER pAd)
*/
VOID RTUSBBulkRxComplete(purbb_t pUrb, struct pt_regs *pt_regs)
{
- // use a receive tasklet to handle received packets;
- // or sometimes hardware IRQ will be disabled here, so we can not
- // use spin_lock_bh()/spin_unlock_bh() after IRQ is disabled. :<
+ /* use a receive tasklet to handle received packets; */
+ /* or sometimes hardware IRQ will be disabled here, so we can not */
+ /* use spin_lock_bh()/spin_unlock_bh() after IRQ is disabled. :< */
PRX_CONTEXT pRxContext;
PRTMP_ADAPTER pAd;
POS_COOKIE pObj;
@@ -945,19 +945,19 @@ VOID RTUSBBulkRxComplete(purbb_t pUrb, struct pt_regs *pt_regs)
*/
VOID RTUSBKickBulkOut(IN PRTMP_ADAPTER pAd)
{
- // BulkIn Reset will reset whole USB PHY. So we need to make sure fRTMP_ADAPTER_BULKIN_RESET not flaged.
+ /* BulkIn Reset will reset whole USB PHY. So we need to make sure fRTMP_ADAPTER_BULKIN_RESET not flaged. */
if (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NEED_STOP_TX)
) {
- // 2. PS-Poll frame is next
+ /* 2. PS-Poll frame is next */
if (RTUSB_TEST_BULK_FLAG(pAd, fRTUSB_BULK_OUT_PSPOLL)) {
RTUSBBulkOutPsPoll(pAd);
}
- // 5. Mlme frame is next
+ /* 5. Mlme frame is next */
else if ((RTUSB_TEST_BULK_FLAG(pAd, fRTUSB_BULK_OUT_MLME)) ||
(pAd->MgmtRing.TxSwFreeIdx < MGMT_RING_SIZE)) {
RTUSBBulkOutMLMEPacket(pAd, pAd->MgmtRing.TxDmaIdx);
}
- // 6. Data frame normal is next
+ /* 6. Data frame normal is next */
if (RTUSB_TEST_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_NORMAL)) {
if (((!RTMP_TEST_FLAG
(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
@@ -1006,14 +1006,14 @@ VOID RTUSBKickBulkOut(IN PRTMP_ADAPTER pAd)
NextBulkOutIndex[3]);
}
}
- // 7. Null frame is the last
+ /* 7. Null frame is the last */
else if (RTUSB_TEST_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_NULL)) {
if (!RTMP_TEST_FLAG
(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS)) {
RTUSBBulkOutNullFrame(pAd);
}
}
- // 8. No data avaliable
+ /* 8. No data avaliable */
else {
}
@@ -1116,8 +1116,8 @@ VOID RTUSBCancelPendingBulkInIRP(IN PRTMP_ADAPTER pAd)
RTUSB_UNLINK_URB(pRxContext->pUrb);
pRxContext->IRPPending = FALSE;
pRxContext->InUse = FALSE;
- //NdisInterlockedDecrement(&pAd->PendingRx);
- //pAd->PendingRx--;
+ /*NdisInterlockedDecrement(&pAd->PendingRx); */
+ /*pAd->PendingRx--; */
}
}
DBGPRINT_RAW(RT_DEBUG_TRACE, ("<---RTUSBCancelPendingBulkInIRP\n"));
@@ -1145,65 +1145,65 @@ VOID RTUSBCancelPendingBulkOutIRP(IN PRTMP_ADAPTER pAd)
PTX_CONTEXT pPsPollContext;
PTX_CONTEXT pRTSContext;
UINT i, Idx;
-// unsigned int IrqFlags;
-// NDIS_SPIN_LOCK *pLock;
-// BOOLEAN *pPending;
+/* unsigned int IrqFlags; */
+/* NDIS_SPIN_LOCK *pLock; */
+/* BOOLEAN *pPending; */
-// pLock = &pAd->BulkOutLock[MGMTPIPEIDX];
-// pPending = &pAd->BulkOutPending[MGMTPIPEIDX];
+/* pLock = &pAd->BulkOutLock[MGMTPIPEIDX]; */
+/* pPending = &pAd->BulkOutPending[MGMTPIPEIDX]; */
for (Idx = 0; Idx < 4; Idx++) {
pHTTXContext = &(pAd->TxContext[Idx]);
if (pHTTXContext->IRPPending == TRUE) {
- // Get the USB_CONTEXT and cancel it's IRP; the completion routine will itself
- // remove it from the HeadPendingSendList and NULL out HeadPendingSendList
- // when the last IRP on the list has been cancelled; that's how we exit this loop
- //
+ /* Get the USB_CONTEXT and cancel it's IRP; the completion routine will itself */
+ /* remove it from the HeadPendingSendList and NULL out HeadPendingSendList */
+ /* when the last IRP on the list has been cancelled; that's how we exit this loop */
+ /* */
RTUSB_UNLINK_URB(pHTTXContext->pUrb);
- // Sleep 200 microseconds to give cancellation time to work
+ /* Sleep 200 microseconds to give cancellation time to work */
RTMPusecDelay(200);
}
pAd->BulkOutPending[Idx] = FALSE;
}
- //RTMP_IRQ_LOCK(pLock, IrqFlags);
+ /*RTMP_IRQ_LOCK(pLock, IrqFlags); */
for (i = 0; i < MGMT_RING_SIZE; i++) {
pMLMEContext = (PTX_CONTEXT) pAd->MgmtRing.Cell[i].AllocVa;
if (pMLMEContext && (pMLMEContext->IRPPending == TRUE)) {
- // Get the USB_CONTEXT and cancel it's IRP; the completion routine will itself
- // remove it from the HeadPendingSendList and NULL out HeadPendingSendList
- // when the last IRP on the list has been cancelled; that's how we exit this loop
- //
+ /* Get the USB_CONTEXT and cancel it's IRP; the completion routine will itself */
+ /* remove it from the HeadPendingSendList and NULL out HeadPendingSendList */
+ /* when the last IRP on the list has been cancelled; that's how we exit this loop */
+ /* */
RTUSB_UNLINK_URB(pMLMEContext->pUrb);
pMLMEContext->IRPPending = FALSE;
- // Sleep 200 microsecs to give cancellation time to work
+ /* Sleep 200 microsecs to give cancellation time to work */
RTMPusecDelay(200);
}
}
pAd->BulkOutPending[MGMTPIPEIDX] = FALSE;
- //RTMP_IRQ_UNLOCK(pLock, IrqFlags);
+ /*RTMP_IRQ_UNLOCK(pLock, IrqFlags); */
for (i = 0; i < BEACON_RING_SIZE; i++) {
pBeaconContext = &(pAd->BeaconContext[i]);
if (pBeaconContext->IRPPending == TRUE) {
- // Get the USB_CONTEXT and cancel it's IRP; the completion routine will itself
- // remove it from the HeadPendingSendList and NULL out HeadPendingSendList
- // when the last IRP on the list has been cancelled; that's how we exit this loop
- //
+ /* Get the USB_CONTEXT and cancel it's IRP; the completion routine will itself */
+ /* remove it from the HeadPendingSendList and NULL out HeadPendingSendList */
+ /* when the last IRP on the list has been cancelled; that's how we exit this loop */
+ /* */
RTUSB_UNLINK_URB(pBeaconContext->pUrb);
- // Sleep 200 microsecs to give cancellation time to work
+ /* Sleep 200 microsecs to give cancellation time to work */
RTMPusecDelay(200);
}
}
@@ -1227,4 +1227,4 @@ VOID RTUSBCancelPendingBulkOutIRP(IN PRTMP_ADAPTER pAd)
}
}
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
diff --git a/drivers/staging/rt2870/common/rtusb_data.c b/drivers/staging/rt2870/common/rtusb_data.c
index d662f7f..e6b0afc 100644
--- a/drivers/staging/rt2870/common/rtusb_data.c
+++ b/drivers/staging/rt2870/common/rtusb_data.c
@@ -41,7 +41,7 @@
#include "../rt_config.h"
-extern UCHAR Phy11BGNextRateUpward[]; // defined in mlme.c
+extern UCHAR Phy11BGNextRateUpward[]; /* defined in mlme.c */
extern UCHAR EpToQueue[];
VOID REPORT_AMSDU_FRAMES_TO_LLC(IN PRTMP_ADAPTER pAd,
@@ -89,8 +89,8 @@ NDIS_STATUS RTUSBFreeDescriptorRequest(IN PRTMP_ADAPTER pAd,
IN UCHAR BulkOutPipeId,
IN UINT32 NumberRequired)
{
-// UCHAR FreeNumber = 0;
-// UINT Index;
+/* UCHAR FreeNumber = 0; */
+/* UINT Index; */
NDIS_STATUS Status = NDIS_STATUS_FAILURE;
unsigned long IrqFlags;
HT_TX_CONTEXT *pHTTXContext;
@@ -251,7 +251,7 @@ VOID RTMPWriteTxInfo(IN PRTMP_ADAPTER pAd,
if (QueueSel != FIFO_EDCA)
DBGPRINT(RT_DEBUG_TRACE,
("====> QueueSel != FIFO_EDCA<============\n"));
- pTxInfo->USBDMANextVLD = FALSE; //NextValid; // Need to check with Jan about this.
+ pTxInfo->USBDMANextVLD = FALSE; /*NextValid; // Need to check with Jan about this. */
pTxInfo->USBDMATxburst = TxBurst;
pTxInfo->WIV = bWiv;
pTxInfo->SwUseLastRound = 0;
@@ -259,4 +259,4 @@ VOID RTMPWriteTxInfo(IN PRTMP_ADAPTER pAd,
pTxInfo->rsv2 = 0;
}
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
diff --git a/drivers/staging/rt2870/common/rtusb_io.c b/drivers/staging/rt2870/common/rtusb_io.c
index 9a32bc8..dd2e0d0 100644
--- a/drivers/staging/rt2870/common/rtusb_io.c
+++ b/drivers/staging/rt2870/common/rtusb_io.c
@@ -88,7 +88,7 @@ NTSTATUS RTUSBFirmwareWrite(IN PRTMP_ADAPTER pAd,
{
UINT32 MacReg;
NTSTATUS Status;
-// ULONG i;
+/* ULONG i; */
USHORT writeLen;
Status = RTUSBReadMACRegister(pAd, MAC_CSR0, &MacReg);
@@ -100,11 +100,11 @@ NTSTATUS RTUSBFirmwareWrite(IN PRTMP_ADAPTER pAd,
Status = RTUSBWriteMACRegister(pAd, 0x701c, 0xffffffff);
Status = RTUSBFirmwareRun(pAd);
- //2008/11/28:KH add to fix the dead rf frequency offset bug<--
+ /*2008/11/28:KH add to fix the dead rf frequency offset bug<-- */
RTMPusecDelay(10000);
RTUSBWriteMACRegister(pAd, H2M_MAILBOX_CSR, 0);
- AsicSendCommandToMcu(pAd, 0x72, 0x00, 0x00, 0x00); //reset rf by MCU supported by new firmware
- //2008/11/28:KH add to fix the dead rf frequency offset bug-->
+ AsicSendCommandToMcu(pAd, 0x72, 0x00, 0x00, 0x00); /*reset rf by MCU supported by new firmware */
+ /*2008/11/28:KH add to fix the dead rf frequency offset bug--> */
return Status;
}
@@ -171,7 +171,7 @@ NTSTATUS RTUSBMultiWrite_OneByte(IN PRTMP_ADAPTER pAd,
{
NTSTATUS Status;
- // TODO: In 2870, use this funciton carefully cause it's not stable.
+ /* TODO: In 2870, use this funciton carefully cause it's not stable. */
Status = RTUSB_VendorRequest(pAd,
USBD_TRANSFER_DIRECTION_OUT,
DEVICE_VENDOR_REQUEST_OUT,
@@ -304,7 +304,7 @@ NTSTATUS RTUSBReadBBPRegister(IN PRTMP_ADAPTER pAd,
UINT i = 0;
NTSTATUS status;
- // Verify the busy condition
+ /* Verify the busy condition */
do {
status = RTUSBReadMACRegister(pAd, BBP_CSR_CFG, &BbpCsr.word);
if (status >= 0) {
@@ -320,16 +320,16 @@ NTSTATUS RTUSBReadBBPRegister(IN PRTMP_ADAPTER pAd,
if ((i == RETRY_LIMIT)
|| (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST))) {
- //
- // Read failed then Return Default value.
- //
+ /* */
+ /* Read failed then Return Default value. */
+ /* */
*pValue = pAd->BbpWriteLatch[Id];
DBGPRINT_RAW(RT_DEBUG_ERROR,
("Retry count exhausted or device removed!!!\n"));
return STATUS_UNSUCCESSFUL;
}
- // Prepare for write material
+ /* Prepare for write material */
BbpCsr.word = 0;
BbpCsr.field.fRead = 1;
BbpCsr.field.Busy = 1;
@@ -337,7 +337,7 @@ NTSTATUS RTUSBReadBBPRegister(IN PRTMP_ADAPTER pAd,
RTUSBWriteMACRegister(pAd, BBP_CSR_CFG, BbpCsr.word);
i = 0;
- // Verify the busy condition
+ /* Verify the busy condition */
do {
status = RTUSBReadMACRegister(pAd, BBP_CSR_CFG, &BbpCsr.word);
if (status >= 0) {
@@ -355,9 +355,9 @@ NTSTATUS RTUSBReadBBPRegister(IN PRTMP_ADAPTER pAd,
if ((i == RETRY_LIMIT)
|| (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST))) {
- //
- // Read failed then Return Default value.
- //
+ /* */
+ /* Read failed then Return Default value. */
+ /* */
*pValue = pAd->BbpWriteLatch[Id];
DBGPRINT_RAW(RT_DEBUG_ERROR,
@@ -389,7 +389,7 @@ NTSTATUS RTUSBWriteBBPRegister(IN PRTMP_ADAPTER pAd,
BBP_CSR_CFG_STRUC BbpCsr;
UINT i = 0;
NTSTATUS status;
- // Verify the busy condition
+ /* Verify the busy condition */
do {
status = RTUSBReadMACRegister(pAd, BBP_CSR_CFG, &BbpCsr.word);
if (status >= 0) {
@@ -410,7 +410,7 @@ NTSTATUS RTUSBWriteBBPRegister(IN PRTMP_ADAPTER pAd,
("Retry count exhausted or device removed!!!\n"));
return STATUS_UNSUCCESSFUL;
}
- // Prepare for write material
+ /* Prepare for write material */
BbpCsr.word = 0;
BbpCsr.field.fRead = 0;
BbpCsr.field.Value = Value;
@@ -561,11 +561,11 @@ VOID RTUSBPutToSleep(IN PRTMP_ADAPTER pAd)
{
UINT32 value;
- // Timeout 0x40 x 50us
+ /* Timeout 0x40 x 50us */
value = (SLEEPCID << 16) + (OWNERMCU << 24) + (0x40 << 8) + 1;
RTUSBWriteMACRegister(pAd, 0x7010, value);
RTUSBWriteMACRegister(pAd, 0x404, 0x30);
- //RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS);
+ /*RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS); */
DBGPRINT_RAW(RT_DEBUG_ERROR, ("Sleep Mailbox testvalue %x\n", value));
}
@@ -959,7 +959,7 @@ NTSTATUS RTUSB_ResetDevice(IN PRTMP_ADAPTER pAd)
NTSTATUS Status = TRUE;
DBGPRINT_RAW(RT_DEBUG_TRACE, ("--->USB_ResetDevice\n"));
- //RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS);
+ /*RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS); */
return Status;
}
@@ -968,9 +968,9 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd)
PCmdQElmt cmdqelmt;
PUCHAR pData;
NDIS_STATUS NdisStatus = NDIS_STATUS_SUCCESS;
-// ULONG Now = 0;
+/* ULONG Now = 0; */
NTSTATUS ntStatus;
-// unsigned long IrqFlags;
+/* unsigned long IrqFlags; */
while (pAd && pAd->CmdQ.size > 0) {
NdisStatus = NDIS_STATUS_SUCCESS;
@@ -993,7 +993,7 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd)
UINT32 data;
{
- // Read GPIO pin2 as Hardware controlled radio state
+ /* Read GPIO pin2 as Hardware controlled radio state */
RTUSBReadMACRegister(pAd,
GPIO_CTRL_CFG,
@@ -1023,7 +1023,7 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd)
MlmeRadioOn
(pAd);
- // Update extra information
+ /* Update extra information */
pAd->ExtraInfo =
EXTRA_INFO_CLEAR;
} else {
@@ -1033,7 +1033,7 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd)
MlmeRadioOff
(pAd);
- // Update extra information
+ /* Update extra information */
pAd->ExtraInfo =
HW_RADIO_OFF;
}
@@ -1056,15 +1056,15 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd)
UCHAR Index;
int ret = 0;
PHT_TX_CONTEXT pHTTXContext;
-// RTMP_TX_RING *pTxRing;
+/* RTMP_TX_RING *pTxRing; */
unsigned long IrqFlags;
DBGPRINT_RAW(RT_DEBUG_TRACE,
("CmdThread : CMDTHREAD_RESET_BULK_OUT(ResetPipeid=0x%0x)===>\n",
pAd->bulkResetPipeid));
- // All transfers must be aborted or cancelled before attempting to reset the pipe.
- //RTUSBCancelPendingBulkOutIRP(pAd);
- // Wait 10ms to let previous packet that are already in HW FIFO to clear. by MAXLEE 12-25-2007
+ /* All transfers must be aborted or cancelled before attempting to reset the pipe. */
+ /*RTUSBCancelPendingBulkOutIRP(pAd); */
+ /* Wait 10ms to let previous packet that are already in HW FIFO to clear. by MAXLEE 12-25-2007 */
Index = 0;
do {
RTUSBReadMACRegister(pAd,
@@ -1079,12 +1079,12 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd)
MACValue = 0;
RTUSBReadMACRegister(pAd, USB_DMA_CFG,
&MACValue);
- // To prevent Read Register error, we 2nd check the validity.
+ /* To prevent Read Register error, we 2nd check the validity. */
if ((MACValue & 0xc00000) == 0)
RTUSBReadMACRegister(pAd,
USB_DMA_CFG,
&MACValue);
- // To prevent Read Register error, we 3rd check the validity.
+ /* To prevent Read Register error, we 3rd check the validity. */
if ((MACValue & 0xc00000) == 0)
RTUSBReadMACRegister(pAd,
USB_DMA_CFG,
@@ -1093,7 +1093,7 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd)
RTUSBWriteMACRegister(pAd, USB_DMA_CFG,
MACValue);
- // Wait 1ms to prevent next URB to bulkout before HW reset. by MAXLEE 12-25-2007
+ /* Wait 1ms to prevent next URB to bulkout before HW reset. by MAXLEE 12-25-2007 */
RTMPusecDelay(1000);
MACValue &= (~0x80000);
@@ -1102,8 +1102,8 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd)
DBGPRINT_RAW(RT_DEBUG_TRACE,
("\tSet 0x2a0 bit19. Clear USB DMA TX path\n"));
- // Wait 5ms to prevent next URB to bulkout before HW reset. by MAXLEE 12-25-2007
- //RTMPusecDelay(5000);
+ /* Wait 5ms to prevent next URB to bulkout before HW reset. by MAXLEE 12-25-2007 */
+ /*RTMPusecDelay(5000); */
if ((pAd->
bulkResetPipeid &
@@ -1127,7 +1127,7 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd)
&(pAd->
TxContext[pAd->
bulkResetPipeid]);
- //NdisAcquireSpinLock(&pAd->BulkOutLock[pAd->bulkResetPipeid]);
+ /*NdisAcquireSpinLock(&pAd->BulkOutLock[pAd->bulkResetPipeid]); */
RTMP_INT_LOCK(&pAd->
BulkOutLock[pAd->
bulkResetPipeid],
@@ -1148,11 +1148,11 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd)
bulkResetPipeid] =
1;
- // no matter what, clean the flag
+ /* no matter what, clean the flag */
RTMP_CLEAR_FLAG(pAd,
fRTMP_ADAPTER_BULKOUT_RESET);
- //NdisReleaseSpinLock(&pAd->BulkOutLock[pAd->bulkResetPipeid]);
+ /*NdisReleaseSpinLock(&pAd->BulkOutLock[pAd->bulkResetPipeid]); */
RTMP_INT_UNLOCK(&pAd->
BulkOutLock
[pAd->
@@ -1259,8 +1259,8 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd)
}
}
} else {
- //NdisReleaseSpinLock(&pAd->BulkOutLock[pAd->bulkResetPipeid]);
- //RTMP_INT_UNLOCK(&pAd->BulkOutLock[pAd->bulkResetPipeid], IrqFlags);
+ /*NdisReleaseSpinLock(&pAd->BulkOutLock[pAd->bulkResetPipeid]); */
+ /*RTMP_INT_UNLOCK(&pAd->BulkOutLock[pAd->bulkResetPipeid], IrqFlags); */
DBGPRINT_RAW
(RT_DEBUG_ERROR,
@@ -1338,7 +1338,7 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd)
("\tTX Occupied by %d!\n",
pendingContext));
}
- // no matter what, clean the flag
+ /* no matter what, clean the flag */
RTMP_CLEAR_FLAG(pAd,
fRTMP_ADAPTER_BULKOUT_RESET);
@@ -1358,7 +1358,7 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd)
RTMPDeQueuePacket(pAd, FALSE,
NUM_OF_TX_RING,
MAX_TX_PROCESS);
- //RTUSBKickBulkOut(pAd);
+ /*RTUSBKickBulkOut(pAd); */
}
}
@@ -1403,12 +1403,12 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd)
DBGPRINT_RAW(RT_DEBUG_TRACE,
("CmdThread : CMDTHREAD_RESET_BULK_IN === >\n"));
- // All transfers must be aborted or cancelled before attempting to reset the pipe.
+ /* All transfers must be aborted or cancelled before attempting to reset the pipe. */
{
UINT32 MACValue;
{
- //while ((atomic_read(&pAd->PendingRx) > 0) && (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
+ /*while ((atomic_read(&pAd->PendingRx) > 0) && (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST))) */
if ((pAd->PendingRx > 0)
&&
(!RTMP_TEST_FLAG
@@ -1425,7 +1425,7 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd)
}
}
- // Wait 10ms before reading register.
+ /* Wait 10ms before reading register. */
RTMPusecDelay(10000);
ntStatus =
RTUSBReadMACRegister(pAd, MAC_CSR0,
@@ -1505,7 +1505,7 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd)
i <
pAd->CommonCfg.
NumOfBulkInIRP; i++) {
- //RTUSBBulkReceive(pAd);
+ /*RTUSBBulkReceive(pAd); */
PRX_CONTEXT pRxContext;
PURB pUrb;
int ret = 0;
@@ -1541,11 +1541,11 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd)
BulkInLock,
IrqFlags);
- // Init Rx context descriptor
+ /* Init Rx context descriptor */
RTUSBInitRxDesc(pAd,
pRxContext);
pUrb = pRxContext->pUrb;
- if ((ret = RTUSB_SUBMIT_URB(pUrb)) != 0) { // fail
+ if ((ret = RTUSB_SUBMIT_URB(pUrb)) != 0) { /* fail */
RTMP_IRQ_LOCK
(&pAd->
@@ -1571,9 +1571,9 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd)
ret,
pUrb->
status));
- } else { // success
- //DBGPRINT(RT_DEBUG_TRACE, ("BIDone, Pend=%d,BIIdx=%d,BIRIdx=%d!\n",
- // pAd->PendingRx, pAd->NextRxBulkInIndex, pAd->NextRxBulkInReadIndex));
+ } else { /* success */
+ /*DBGPRINT(RT_DEBUG_TRACE, ("BIDone, Pend=%d,BIIdx=%d,BIRIdx=%d!\n", */
+ /* pAd->PendingRx, pAd->NextRxBulkInIndex, pAd->NextRxBulkInReadIndex)); */
DBGPRINT_RAW
(RT_DEBUG_TRACE,
("CMDTHREAD_RESET_BULK_IN: Submit Rx URB Done, status=%d!\n",
@@ -1584,7 +1584,7 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd)
}
} else {
- // Card must be removed
+ /* Card must be removed */
if (NT_SUCCESS(ntStatus) !=
TRUE) {
RTMP_SET_FLAG(pAd,
@@ -1643,7 +1643,7 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd)
MACValue));
RTUSBWriteMACRegister(pAd, offset,
MACValue);
- // Read bitmask
+ /* Read bitmask */
RTUSBReadMACRegister(pAd, offset + 4,
&MACRValue);
if (SetAsicWcid.DeleteTid != 0xffffffff)
@@ -1693,7 +1693,7 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd)
("Cmd : CMDTHREAD_SET_ASIC_WCID_CIPHER : WCID = %ld, Cipher = %lx.\n",
SetAsicWcidAttri.WCID,
SetAsicWcidAttri.Cipher));
- // Read bitmask
+ /* Read bitmask */
RTUSBReadMACRegister(pAd, offset,
&MACRValue);
MACRValue = 0;
@@ -1725,10 +1725,10 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd)
("2-offset = %x , MACValue= %x,\n",
offset, MACRValue));
- //
- // Update cipher algorithm. WSTA always use BSS0
- //
- // for adhoc mode only ,because wep status slow than add key, when use zero config
+ /* */
+ /* Update cipher algorithm. WSTA always use BSS0 */
+ /* */
+ /* for adhoc mode only ,because wep status slow than add key, when use zero config */
if (pAd->StaCfg.BssType == BSS_ADHOC) {
offset =
MAC_WCID_ATTRIBUTE_BASE;
@@ -1745,7 +1745,7 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd)
offset,
MACRValue);
- //Update group key cipher,,because wep status slow than add key, when use zero config
+ /*Update group key cipher,,because wep status slow than add key, when use zero config */
RTUSBReadMACRegister(pAd,
SHARED_KEY_MODE_BASE
+
@@ -1770,8 +1770,8 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd)
}
break;
-//Benson modified for USB interface, avoid in interrupt when write key, 20080724 -->
- case RT_CMD_SET_KEY_TABLE: //General call for AsicAddPairwiseKeyEntry()
+/*Benson modified for USB interface, avoid in interrupt when write key, 20080724 --> */
+ case RT_CMD_SET_KEY_TABLE: /*General call for AsicAddPairwiseKeyEntry() */
{
RT_ADD_PAIRWISE_KEY_ENTRY KeyInfo;
KeyInfo =
@@ -1786,7 +1786,7 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd)
}
break;
- case RT_CMD_SET_RX_WCID_TABLE: //General call for RTMPAddWcidAttributeEntry()
+ case RT_CMD_SET_RX_WCID_TABLE: /*General call for RTMPAddWcidAttributeEntry() */
{
PMAC_TABLE_ENTRY pEntry;
UCHAR KeyIdx = 0;
@@ -1802,7 +1802,7 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd)
pEntry);
}
break;
-//Benson modified for USB interface, avoid in interrupt when write key, 20080724 <--
+/*Benson modified for USB interface, avoid in interrupt when write key, 20080724 <-- */
case CMDTHREAD_SET_CLIENT_MAC_ENTRY:
{
@@ -1865,17 +1865,17 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd)
DefaultKeyId].
CipherAlg, FALSE);
} else {
- //
- // Other case, disable engine.
- // Don't worry WPA key, we will add WPA Key after 4-Way handshaking.
- //
+ /* */
+ /* Other case, disable engine. */
+ /* Don't worry WPA key, we will add WPA Key after 4-Way handshaking. */
+ /* */
USHORT offset;
offset =
MAC_WCID_ATTRIBUTE_BASE
+
(pEntry->Aid *
HW_WCID_ATTRI_SIZE);
- // RX_PKEY_MODE:0 for no security; RX_KEY_TAB:0 for shared key table; BSS_IDX:0
+ /* RX_PKEY_MODE:0 for no security; RX_KEY_TAB:0 for shared key table; BSS_IDX:0 */
RTUSBWriteMACRegister
(pAd, offset, 0);
}
@@ -1894,7 +1894,7 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd)
}
break;
-// add by johnli, fix "in_interrupt" error when call "MacTableDeleteEntry" in Rx tasklet
+/* add by johnli, fix "in_interrupt" error when call "MacTableDeleteEntry" in Rx tasklet */
case CMDTHREAD_UPDATE_PROTECT:
{
AsicUpdateProtect(pAd, 0,
@@ -1902,7 +1902,7 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd)
TRUE, 0);
}
break;
-// end johnli
+/* end johnli */
case OID_802_11_ADD_WEP:
{
@@ -1916,7 +1916,7 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd)
pWepKey = (PNDIS_802_11_WEP) pData;
KeyIdx = pWepKey->KeyIndex & 0x0fffffff;
- // it is a shared key
+ /* it is a shared key */
if ((KeyIdx >= 4)
|| ((pWepKey->KeyLength != 5)
&& (pWepKey->KeyLength !=
@@ -1944,10 +1944,10 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd)
5) ? CIPHER_WEP64 :
CIPHER_WEP128;
- //
- // Change the WEP cipher to CKIP cipher if CKIP KP on.
- // Funk UI or Meetinghouse UI will add ckip key from this path.
- //
+ /* */
+ /* Change the WEP cipher to CKIP cipher if CKIP KP on. */
+ /* Funk UI or Meetinghouse UI will add ckip key from this path. */
+ /* */
if (pAd->OpMode == OPMODE_STA) {
pAd->MacTab.
@@ -1968,7 +1968,7 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd)
CipherAlg = CipherAlg;
if (pWepKey->
KeyIndex & 0x80000000) {
- // Default key for tx (shared key)
+ /* Default key for tx (shared key) */
UCHAR IVEIV[8];
UINT32 WCIDAttri, Value;
USHORT offset, offset2;
@@ -1977,8 +1977,8 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd)
pAd->StaCfg.
DefaultKeyId =
(UCHAR) KeyIdx;
- // Add BSSID to WCTable. because this is Tx wep key.
- // WCID Attribute UDF:3, BSSIdx:3, Alg:3, Keytable:1=PAIRWISE KEY, BSSIdx is 0
+ /* Add BSSID to WCTable. because this is Tx wep key. */
+ /* WCID Attribute UDF:3, BSSIdx:3, Alg:3, Keytable:1=PAIRWISE KEY, BSSIdx is 0 */
WCIDAttri =
(CipherAlg << 1) |
SHAREDKEYTABLE;
@@ -1991,9 +1991,9 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd)
RTUSBWriteMACRegister
(pAd, offset,
WCIDAttri);
- // 1. IV/EIV
- // Specify key index to find shared key.
- IVEIV[3] = (UCHAR) (KeyIdx << 6); //WEP Eiv bit off. groupkey index is not 0
+ /* 1. IV/EIV */
+ /* Specify key index to find shared key. */
+ IVEIV[3] = (UCHAR) (KeyIdx << 6); /*WEP Eiv bit off. groupkey index is not 0 */
offset =
PAIRWISE_IVEIV_TABLE_BASE
+
@@ -2030,7 +2030,7 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd)
i += 4;
}
- // 2. WCID Attribute UDF:3, BSSIdx:3, Alg:3, Keytable:use share key, BSSIdx is 0
+ /* 2. WCID Attribute UDF:3, BSSIdx:3, Alg:3, Keytable:use share key, BSSIdx is 0 */
WCIDAttri =
(pAd->
SharedKey[BSS0]
@@ -2109,4 +2109,4 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd)
} /* end of while */
}
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
--
1.6.5.5
More information about the devel
mailing list