[PATCH v2 19/30] staging: nvec: Move implementation-only macros out of the header

[Julian Andres Klode]

Those macros are needed only for implementation purposes and
do not have any use for other code wishing to use nvec.

Signed-off-by: Julian Andres Klode <jak at jak-linux.org>
Acked-by: Marc Dietrich <marvin24 at gmx.de>
---
 drivers/staging/nvec/nvec.c |   20 ++++++++++++++++++++
 drivers/staging/nvec/nvec.h |   21 ---------------------
 2 files changed, 20 insertions(+), 21 deletions(-)

diff --git a/drivers/staging/nvec/nvec.c b/drivers/staging/nvec/nvec.c
index 057c888..3fa1c75 100644
--- a/drivers/staging/nvec/nvec.c
+++ b/drivers/staging/nvec/nvec.c
@@ -42,6 +42,26 @@
 
 #include "nvec.h"
 
+#define I2C_CNFG			0x00
+#define I2C_CNFG_PACKET_MODE_EN		(1<<10)
+#define I2C_CNFG_NEW_MASTER_SFM		(1<<11)
+#define I2C_CNFG_DEBOUNCE_CNT_SHIFT	12
+
+#define I2C_SL_CNFG		0x20
+#define I2C_SL_NEWL		(1<<2)
+#define I2C_SL_NACK		(1<<1)
+#define I2C_SL_RESP		(1<<0)
+#define I2C_SL_IRQ		(1<<3)
+#define END_TRANS		(1<<4)
+#define RCVD			(1<<2)
+#define RNW			(1<<1)
+
+#define I2C_SL_RCVD		0x24
+#define I2C_SL_STATUS		0x28
+#define I2C_SL_ADDR1		0x2c
+#define I2C_SL_ADDR2		0x30
+#define I2C_SL_DELAY_COUNT	0x3c
+
 static const unsigned char EC_DISABLE_EVENT_REPORTING[3] = "\x04\x00\x00";
 static const unsigned char EC_ENABLE_EVENT_REPORTING[3]  = "\x04\x00\x01";
 static const unsigned char EC_GET_FIRMWARE_VERSION[2]    = "\x07\x15";
diff --git a/drivers/staging/nvec/nvec.h b/drivers/staging/nvec/nvec.h
index d1e4f57..4478753 100644
--- a/drivers/staging/nvec/nvec.h
+++ b/drivers/staging/nvec/nvec.h
@@ -192,25 +192,4 @@ extern int nvec_register_notifier(struct nvec_chip *nvec,
 extern int nvec_unregister_notifier(struct device *dev,
 				    struct notifier_block *nb,
 				    unsigned int events);
-
-#define I2C_CNFG			0x00
-#define I2C_CNFG_PACKET_MODE_EN		(1<<10)
-#define I2C_CNFG_NEW_MASTER_SFM		(1<<11)
-#define I2C_CNFG_DEBOUNCE_CNT_SHIFT	12
-
-#define I2C_SL_CNFG		0x20
-#define I2C_SL_NEWL		(1<<2)
-#define I2C_SL_NACK		(1<<1)
-#define I2C_SL_RESP		(1<<0)
-#define I2C_SL_IRQ		(1<<3)
-#define END_TRANS		(1<<4)
-#define RCVD			(1<<2)
-#define RNW			(1<<1)
-
-#define I2C_SL_RCVD		0x24
-#define I2C_SL_STATUS		0x28
-#define I2C_SL_ADDR1		0x2c
-#define I2C_SL_ADDR2		0x30
-#define I2C_SL_DELAY_COUNT	0x3c
-
 #endif
-- 
1.7.5.4